dmaengine: stm32-dma: threshold manages with bitfield feature

>From now on, DMA bitfield is to manage DMA FIFO Threshold.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This commit is contained in:
Pierre Yves MORDRET 2018-03-13 17:42:01 +01:00 коммит произвёл Vinod Koul
Родитель 7c7055c7c5
Коммит 951f44cb6c
1 изменённых файлов: 16 добавлений и 3 удалений

Просмотреть файл

@ -116,6 +116,10 @@
#define STM32_DMA_MAX_DATA_PARAM 0x03
#define STM32_DMA_MAX_BURST 16
/* DMA Features */
#define STM32_DMA_THRESHOLD_FTR_MASK GENMASK(1, 0)
#define STM32_DMA_THRESHOLD_FTR_GET(n) ((n) & STM32_DMA_THRESHOLD_FTR_MASK)
enum stm32_dma_width {
STM32_DMA_BYTE,
STM32_DMA_HALF_WORD,
@ -129,11 +133,18 @@ enum stm32_dma_burst_size {
STM32_DMA_BURST_INCR16,
};
/**
* struct stm32_dma_cfg - STM32 DMA custom configuration
* @channel_id: channel ID
* @request_line: DMA request
* @stream_config: 32bit mask specifying the DMA channel configuration
* @features: 32bit mask specifying the DMA Feature list
*/
struct stm32_dma_cfg {
u32 channel_id;
u32 request_line;
u32 stream_config;
u32 threshold;
u32 features;
};
struct stm32_dma_chan_reg {
@ -171,6 +182,7 @@ struct stm32_dma_chan {
u32 next_sg;
struct dma_slave_config dma_sconfig;
struct stm32_dma_chan_reg chan_reg;
u32 threshold;
};
struct stm32_dma_device {
@ -976,7 +988,8 @@ static void stm32_dma_set_config(struct stm32_dma_chan *chan,
/* Enable Interrupts */
chan->chan_reg.dma_scr |= STM32_DMA_SCR_TEIE | STM32_DMA_SCR_TCIE;
chan->chan_reg.dma_sfcr = cfg->threshold & STM32_DMA_SFCR_FTH_MASK;
chan->threshold = STM32_DMA_THRESHOLD_FTR_GET(cfg->features);
chan->chan_reg.dma_sfcr = STM32_DMA_SFCR_FTH(chan->threshold);
}
static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
@ -996,7 +1009,7 @@ static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
cfg.channel_id = dma_spec->args[0];
cfg.request_line = dma_spec->args[1];
cfg.stream_config = dma_spec->args[2];
cfg.threshold = dma_spec->args[3];
cfg.features = dma_spec->args[3];
if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) ||
(cfg.request_line >= STM32_DMA_MAX_REQUEST_ID)) {