diff --git a/Documentation/devicetree/bindings/net/micrel-ksz9021.txt b/Documentation/devicetree/bindings/net/micrel-ksz9021.txt
new file mode 100644
index 000000000000..997a63f1aea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel-ksz9021.txt
@@ -0,0 +1,49 @@
+Micrel KSZ9021 Gigabit Ethernet PHY
+
+Some boards require special tuning values, particularly when it comes to
+clock delays.  You can specify clock delay values by adding
+micrel-specific properties to an Ethernet OF device node.
+
+All skew control options are specified in picoseconds.  The minimum
+value is 0, and the maximum value is 3000.
+
+Optional properties:
+ - rxc-skew-ps : Skew control of RXC pad
+ - rxdv-skew-ps : Skew control of RX CTL pad
+ - txc-skew-ps : Skew control of TXC pad
+ - txen-skew-ps : Skew control of TX_CTL pad
+ - rxd0-skew-ps : Skew control of RX data 0 pad
+ - rxd1-skew-ps : Skew control of RX data 1 pad
+ - rxd2-skew-ps : Skew control of RX data 2 pad
+ - rxd3-skew-ps : Skew control of RX data 3 pad
+ - txd0-skew-ps : Skew control of TX data 0 pad
+ - txd1-skew-ps : Skew control of TX data 1 pad
+ - txd2-skew-ps : Skew control of TX data 2 pad
+ - txd3-skew-ps : Skew control of TX data 3 pad
+
+Examples:
+
+	/* Attach to an Ethernet device with autodetected PHY */
+	&enet {
+		rxc-skew-ps = <3000>;
+		rxdv-skew-ps = <0>;
+		txc-skew-ps = <3000>;
+		txen-skew-ps = <0>;
+		status = "okay";
+	};
+
+	/* Attach to an explicitly-specified PHY */
+	mdio {
+		phy0: ethernet-phy@0 {
+			rxc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			reg = <0>;
+		};
+	};
+	ethernet@70000 {
+		status = "okay";
+		phy = <&phy0>;
+		phy-mode = "rgmii-id";
+	};
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 9ca494550186..c31aad0004cb 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/micrel_phy.h>
+#include <linux/of.h>
 
 /* Operation Mode Strap Override */
 #define MII_KSZPHY_OMSO				0x16
@@ -53,6 +54,20 @@
 #define KS8737_CTRL_INT_ACTIVE_HIGH		(1 << 14)
 #define KSZ8051_RMII_50MHZ_CLK			(1 << 7)
 
+/* Write/read to/from extended registers */
+#define MII_KSZPHY_EXTREG                       0x0b
+#define KSZPHY_EXTREG_WRITE                     0x8000
+
+#define MII_KSZPHY_EXTREG_WRITE                 0x0c
+#define MII_KSZPHY_EXTREG_READ                  0x0d
+
+/* Extended registers */
+#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW         0x104
+#define MII_KSZPHY_RX_DATA_PAD_SKEW             0x105
+#define MII_KSZPHY_TX_DATA_PAD_SKEW             0x106
+
+#define PS_TO_REG				200
+
 static int ksz_config_flags(struct phy_device *phydev)
 {
 	int regval;
@@ -65,6 +80,20 @@ static int ksz_config_flags(struct phy_device *phydev)
 	return 0;
 }
 
+static int kszphy_extended_write(struct phy_device *phydev,
+                                 u32 regnum, u16 val)
+{
+	phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
+	return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
+}
+
+static int kszphy_extended_read(struct phy_device *phydev,
+                                 u32 regnum)
+{
+	phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
+	return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
+}
+
 static int kszphy_ack_interrupt(struct phy_device *phydev)
 {
 	/* bit[7..0] int status, which is a read and clear register. */
@@ -141,6 +170,78 @@ static int ks8051_config_init(struct phy_device *phydev)
 	return rc < 0 ? rc : 0;
 }
 
+static int ksz9021_load_values_from_of(struct phy_device *phydev,
+				       struct device_node *of_node, u16 reg,
+				       char *field1, char *field2,
+				       char *field3, char *field4)
+{
+	int val1 = -1;
+	int val2 = -2;
+	int val3 = -3;
+	int val4 = -4;
+	int newval;
+	int matches = 0;
+
+	if (!of_property_read_u32(of_node, field1, &val1))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field2, &val2))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field3, &val3))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field4, &val4))
+		matches++;
+
+	if (!matches)
+		return 0;
+
+	if (matches < 4)
+		newval = kszphy_extended_read(phydev, reg);
+	else
+		newval = 0;
+
+	if (val1 != -1)
+		newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0);
+
+	if (val2 != -1)
+		newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4);
+
+	if (val3 != -1)
+		newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8);
+
+	if (val4 != -1)
+		newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12);
+
+	return kszphy_extended_write(phydev, reg, newval);
+}
+
+static int ksz9021_config_init(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->dev;
+	struct device_node *of_node = dev->of_node;
+
+	if (!of_node && dev->parent->of_node)
+		of_node = dev->parent->of_node;
+
+	if (of_node) {
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
+				    "txen-skew-ps", "txc-skew-ps",
+				    "rxdv-skew-ps", "rxc-skew-ps");
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_RX_DATA_PAD_SKEW,
+				    "rxd0-skew-ps", "rxd1-skew-ps",
+				    "rxd2-skew-ps", "rxd3-skew-ps");
+		ksz9021_load_values_from_of(phydev, of_node,
+				    MII_KSZPHY_TX_DATA_PAD_SKEW,
+				    "txd0-skew-ps", "txd1-skew-ps",
+				    "txd2-skew-ps", "txd3-skew-ps");
+	}
+	return 0;
+}
+
 #define KSZ8873MLL_GLOBAL_CONTROL_4	0x06
 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX	(1 << 6)
 #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED	(1 << 4)
@@ -281,7 +382,7 @@ static struct phy_driver ksphy_driver[] = {
 	.name		= "Micrel KSZ9021 Gigabit PHY",
 	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-	.config_init	= kszphy_config_init,
+	.config_init	= ksz9021_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,