drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata

Define struct tda998x_audio_params in include/drm/i2c/tda998x.h and
use it in pdata and for tda998x_configure_audio() parameters. Also
updates tda998x_write_aif() to take struct hdmi_audio_infoframe *
directly as a parameter.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This commit is contained in:
Jyri Sarha 2016-08-09 22:00:04 +03:00 коммит произвёл Russell King
Родитель 3ef500a53f
Коммит 95db3b255f
2 изменённых файлов: 64 добавлений и 48 удалений

Просмотреть файл

@ -41,7 +41,7 @@ struct tda998x_priv {
u8 vip_cntrl_0;
u8 vip_cntrl_1;
u8 vip_cntrl_2;
struct tda998x_encoder_params params;
struct tda998x_audio_params audio_params;
wait_queue_head_t wq_edid;
volatile int wq_edid_wait;
@ -666,26 +666,16 @@ tda998x_write_if(struct tda998x_priv *priv, u8 bit, u16 addr,
reg_set(priv, REG_DIP_IF_FLAGS, bit);
}
static void
tda998x_write_aif(struct tda998x_priv *priv, struct tda998x_encoder_params *p)
static int tda998x_write_aif(struct tda998x_priv *priv,
struct hdmi_audio_infoframe *cea)
{
union hdmi_infoframe frame;
hdmi_audio_infoframe_init(&frame.audio);
frame.audio.channels = p->audio_frame[1] & 0x07;
frame.audio.channel_allocation = p->audio_frame[4];
frame.audio.level_shift_value = (p->audio_frame[5] & 0x78) >> 3;
frame.audio.downmix_inhibit = (p->audio_frame[5] & 0x80) >> 7;
/*
* L-PCM and IEC61937 compressed audio shall always set sample
* frequency to "refer to stream". For others, see the HDMI
* specification.
*/
frame.audio.sample_frequency = (p->audio_frame[2] & 0x1c) >> 2;
frame.audio = *cea;
tda998x_write_if(priv, DIP_IF_FLAGS_IF4, REG_IF4_HB0, &frame);
return 0;
}
static void
@ -710,20 +700,21 @@ static void tda998x_audio_mute(struct tda998x_priv *priv, bool on)
}
}
static void
static int
tda998x_configure_audio(struct tda998x_priv *priv,
struct drm_display_mode *mode, struct tda998x_encoder_params *p)
struct tda998x_audio_params *params,
unsigned mode_clock)
{
u8 buf[6], clksel_aip, clksel_fs, cts_n, adiv;
u32 n;
/* Enable audio ports */
reg_write(priv, REG_ENA_AP, p->audio_cfg);
reg_write(priv, REG_ENA_ACLK, p->audio_clk_cfg);
reg_write(priv, REG_ENA_AP, params->config);
/* Set audio input source */
switch (p->audio_format) {
switch (params->format) {
case AFMT_SPDIF:
reg_write(priv, REG_ENA_ACLK, 0);
reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_SPDIF);
clksel_aip = AIP_CLKSEL_AIP_SPDIF;
clksel_fs = AIP_CLKSEL_FS_FS64SPDIF;
@ -731,15 +722,29 @@ tda998x_configure_audio(struct tda998x_priv *priv,
break;
case AFMT_I2S:
reg_write(priv, REG_ENA_ACLK, 1);
reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S);
clksel_aip = AIP_CLKSEL_AIP_I2S;
clksel_fs = AIP_CLKSEL_FS_ACLK;
cts_n = CTS_N_M(3) | CTS_N_K(3);
switch (params->sample_width) {
case 16:
cts_n = CTS_N_M(3) | CTS_N_K(1);
break;
case 18:
case 20:
case 24:
cts_n = CTS_N_M(3) | CTS_N_K(2);
break;
default:
case 32:
cts_n = CTS_N_M(3) | CTS_N_K(3);
break;
}
break;
default:
BUG();
return;
return -EINVAL;
}
reg_write(priv, REG_AIP_CLKSEL, clksel_aip);
@ -755,11 +760,11 @@ tda998x_configure_audio(struct tda998x_priv *priv,
* assume 100MHz requires larger divider.
*/
adiv = AUDIO_DIV_SERCLK_8;
if (mode->clock > 100000)
if (mode_clock > 100000)
adiv++; /* AUDIO_DIV_SERCLK_16 */
/* S/PDIF asks for a larger divider */
if (p->audio_format == AFMT_SPDIF)
if (params->format == AFMT_SPDIF)
adiv++; /* AUDIO_DIV_SERCLK_16 or _32 */
reg_write(priv, REG_AUDIO_DIV, adiv);
@ -768,7 +773,7 @@ tda998x_configure_audio(struct tda998x_priv *priv,
* This is the approximate value of N, which happens to be
* the recommended values for non-coherent clocks.
*/
n = 128 * p->audio_sample_rate / 1000;
n = 128 * params->sample_rate / 1000;
/* Write the CTS and N values */
buf[0] = 0x44;
@ -786,20 +791,21 @@ tda998x_configure_audio(struct tda998x_priv *priv,
reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
/* Write the channel status */
buf[0] = IEC958_AES0_CON_NOT_COPYRIGHT;
buf[1] = 0x00;
buf[2] = IEC958_AES3_CON_FS_NOTID;
buf[3] = IEC958_AES4_CON_ORIGFS_NOTID |
IEC958_AES4_CON_MAX_WORDLEN_24;
/* Write the channel status
* The REG_CH_STAT_B-registers skip IEC958 AES2 byte, because
* there is a separate register for each I2S wire.
*/
buf[0] = params->status[0];
buf[1] = params->status[1];
buf[2] = params->status[3];
buf[3] = params->status[4];
reg_write_range(priv, REG_CH_STAT_B(0), buf, 4);
tda998x_audio_mute(priv, true);
msleep(20);
tda998x_audio_mute(priv, false);
/* Write the audio information packet */
tda998x_write_aif(priv, p);
return tda998x_write_aif(priv, &params->cea);
}
/* DRM encoder functions */
@ -820,7 +826,7 @@ static void tda998x_encoder_set_config(struct tda998x_priv *priv,
VIP_CNTRL_2_SWAP_F(p->swap_f) |
(p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
priv->params = *p;
priv->audio_params = p->audio_params;
}
static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
@ -1057,9 +1063,11 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
tda998x_write_avi(priv, adjusted_mode);
if (priv->params.audio_cfg)
tda998x_configure_audio(priv, adjusted_mode,
&priv->params);
if (priv->audio_params.format != AFMT_UNUSED) {
tda998x_configure_audio(priv,
&priv->audio_params,
adjusted_mode->clock);
}
}
}

Просмотреть файл

@ -1,6 +1,23 @@
#ifndef __DRM_I2C_TDA998X_H__
#define __DRM_I2C_TDA998X_H__
#include <linux/hdmi.h>
enum {
AFMT_UNUSED = 0,
AFMT_SPDIF = 1,
AFMT_I2S = 2,
};
struct tda998x_audio_params {
u8 config;
u8 format;
unsigned sample_width;
unsigned sample_rate;
struct hdmi_audio_infoframe cea;
u8 status[5];
};
struct tda998x_encoder_params {
u8 swap_b:3;
u8 mirr_b:1;
@ -15,16 +32,7 @@ struct tda998x_encoder_params {
u8 swap_e:3;
u8 mirr_e:1;
u8 audio_cfg;
u8 audio_clk_cfg;
u8 audio_frame[6];
enum {
AFMT_SPDIF,
AFMT_I2S
} audio_format;
unsigned audio_sample_rate;
struct tda998x_audio_params audio_params;
};
#endif