phy: intel: Add Thunder Bay eMMC PHY support
Add support of eMMC PHY for Intel Thunder Bay SoC, uses the Arasan eMMC phy Signed-off-by: Rashmi A <rashmi.a@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20211027115516.4475-5-rashmi.a@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Rashmi A
Vinod Koul
Родитель
efb6935dd7
Коммит
97004c1a4c
|
|
@ -46,3 +46,13 @@ config PHY_INTEL_LGM_EMMC
|
|||
select GENERIC_PHY
|
||||
help
|
||||
Enable this to support the Intel EMMC PHY
|
||||
|
||||
config PHY_INTEL_THUNDERBAY_EMMC
|
||||
tristate "Intel Thunder Bay eMMC PHY driver"
|
||||
depends on OF && (ARCH_THUNDERBAY || COMPILE_TEST)
|
||||
select GENERIC_PHY
|
||||
help
|
||||
This option enables support for Intel Thunder Bay SoC eMMC PHY.
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called phy-intel-thunderbay-emmc.ko.
|
||||
|
|
|
|||
|
|
@ -3,3 +3,4 @@ obj-$(CONFIG_PHY_INTEL_KEEMBAY_EMMC) += phy-intel-keembay-emmc.o
|
|||
obj-$(CONFIG_PHY_INTEL_KEEMBAY_USB) += phy-intel-keembay-usb.o
|
||||
obj-$(CONFIG_PHY_INTEL_LGM_COMBO) += phy-intel-lgm-combo.o
|
||||
obj-$(CONFIG_PHY_INTEL_LGM_EMMC) += phy-intel-lgm-emmc.o
|
||||
obj-$(CONFIG_PHY_INTEL_THUNDERBAY_EMMC) += phy-intel-thunderbay-emmc.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,511 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Intel ThunderBay eMMC PHY driver
|
||||
*
|
||||
* Copyright (C) 2021 Intel Corporation
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/iopoll.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/phy/phy.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
/* eMMC/SD/SDIO core/phy configuration registers */
|
||||
#define CTRL_CFG_0 0x00
|
||||
#define CTRL_CFG_1 0x04
|
||||
#define CTRL_PRESET_0 0x08
|
||||
#define CTRL_PRESET_1 0x0c
|
||||
#define CTRL_PRESET_2 0x10
|
||||
#define CTRL_PRESET_3 0x14
|
||||
#define CTRL_PRESET_4 0x18
|
||||
#define CTRL_CFG_2 0x1c
|
||||
#define CTRL_CFG_3 0x20
|
||||
#define PHY_CFG_0 0x24
|
||||
#define PHY_CFG_1 0x28
|
||||
#define PHY_CFG_2 0x2c
|
||||
#define PHYBIST_CTRL 0x30
|
||||
#define SDHC_STAT3 0x34
|
||||
#define PHY_STAT 0x38
|
||||
#define PHYBIST_STAT_0 0x3c
|
||||
#define PHYBIST_STAT_1 0x40
|
||||
#define EMMC_AXI 0x44
|
||||
|
||||
/* CTRL_PRESET_3 */
|
||||
#define CTRL_PRESET3_MASK GENMASK(31, 0)
|
||||
#define CTRL_PRESET3_SHIFT 0
|
||||
|
||||
/* CTRL_CFG_0 bit fields */
|
||||
#define SUPPORT_HS_MASK BIT(26)
|
||||
#define SUPPORT_HS_SHIFT 26
|
||||
|
||||
#define SUPPORT_8B_MASK BIT(24)
|
||||
#define SUPPORT_8B_SHIFT 24
|
||||
|
||||
/* CTRL_CFG_1 bit fields */
|
||||
#define SUPPORT_SDR50_MASK BIT(28)
|
||||
#define SUPPORT_SDR50_SHIFT 28
|
||||
#define SLOT_TYPE_MASK GENMASK(27, 26)
|
||||
#define SLOT_TYPE_OFFSET 26
|
||||
#define SUPPORT_64B_MASK BIT(24)
|
||||
#define SUPPORT_64B_SHIFT 24
|
||||
#define SUPPORT_HS400_MASK BIT(2)
|
||||
#define SUPPORT_HS400_SHIFT 2
|
||||
#define SUPPORT_DDR50_MASK BIT(1)
|
||||
#define SUPPORT_DDR50_SHIFT 1
|
||||
#define SUPPORT_SDR104_MASK BIT(0)
|
||||
#define SUPPORT_SDR104_SHIFT 0
|
||||
|
||||
/* PHY_CFG_0 bit fields */
|
||||
#define SEL_DLY_TXCLK_MASK BIT(29)
|
||||
#define SEL_DLY_TXCLK_SHIFT 29
|
||||
#define SEL_DLY_RXCLK_MASK BIT(28)
|
||||
#define SEL_DLY_RXCLK_SHIFT 28
|
||||
|
||||
#define OTAP_DLY_ENA_MASK BIT(27)
|
||||
#define OTAP_DLY_ENA_SHIFT 27
|
||||
#define OTAP_DLY_SEL_MASK GENMASK(26, 23)
|
||||
#define OTAP_DLY_SEL_SHIFT 23
|
||||
#define ITAP_CHG_WIN_MASK BIT(22)
|
||||
#define ITAP_CHG_WIN_SHIFT 22
|
||||
#define ITAP_DLY_ENA_MASK BIT(21)
|
||||
#define ITAP_DLY_ENA_SHIFT 21
|
||||
#define ITAP_DLY_SEL_MASK GENMASK(20, 16)
|
||||
#define ITAP_DLY_SEL_SHIFT 16
|
||||
#define RET_ENB_MASK BIT(15)
|
||||
#define RET_ENB_SHIFT 15
|
||||
#define RET_EN_MASK BIT(14)
|
||||
#define RET_EN_SHIFT 14
|
||||
#define DLL_IFF_MASK GENMASK(13, 11)
|
||||
#define DLL_IFF_SHIFT 11
|
||||
#define DLL_EN_MASK BIT(10)
|
||||
#define DLL_EN_SHIFT 10
|
||||
#define DLL_TRIM_ICP_MASK GENMASK(9, 6)
|
||||
#define DLL_TRIM_ICP_SHIFT 6
|
||||
#define RETRIM_EN_MASK BIT(5)
|
||||
#define RETRIM_EN_SHIFT 5
|
||||
#define RETRIM_MASK BIT(4)
|
||||
#define RETRIM_SHIFT 4
|
||||
#define DR_TY_MASK GENMASK(3, 1)
|
||||
#define DR_TY_SHIFT 1
|
||||
#define PWR_DOWN_MASK BIT(0)
|
||||
#define PWR_DOWN_SHIFT 0
|
||||
|
||||
/* PHY_CFG_1 bit fields */
|
||||
#define REN_DAT_MASK GENMASK(19, 12)
|
||||
#define REN_DAT_SHIFT 12
|
||||
#define REN_CMD_MASK BIT(11)
|
||||
#define REN_CMD_SHIFT 11
|
||||
#define REN_STRB_MASK BIT(10)
|
||||
#define REN_STRB_SHIFT 10
|
||||
#define PU_STRB_MASK BIT(20)
|
||||
#define PU_STRB_SHIFT 20
|
||||
|
||||
/* PHY_CFG_2 bit fields */
|
||||
#define CLKBUF_MASK GENMASK(24, 21)
|
||||
#define CLKBUF_SHIFT 21
|
||||
#define SEL_STRB_MASK GENMASK(20, 13)
|
||||
#define SEL_STRB_SHIFT 13
|
||||
#define SEL_FREQ_MASK GENMASK(12, 10)
|
||||
#define SEL_FREQ_SHIFT 10
|
||||
|
||||
/* PHY_STAT bit fields */
|
||||
#define CAL_DONE BIT(6)
|
||||
#define DLL_RDY BIT(5)
|
||||
|
||||
#define OTAP_DLY 0x0
|
||||
#define ITAP_DLY 0x0
|
||||
#define STRB 0x33
|
||||
|
||||
/* From ACS_eMMC51_16nFFC_RO1100_Userguide_v1p0.pdf p17 */
|
||||
#define FREQSEL_200M_170M 0x0
|
||||
#define FREQSEL_170M_140M 0x1
|
||||
#define FREQSEL_140M_110M 0x2
|
||||
#define FREQSEL_110M_80M 0x3
|
||||
#define FREQSEL_80M_50M 0x4
|
||||
#define FREQSEL_275M_250M 0x5
|
||||
#define FREQSEL_250M_225M 0x6
|
||||
#define FREQSEL_225M_200M 0x7
|
||||
|
||||
/* Phy power status */
|
||||
#define PHY_UNINITIALIZED 0
|
||||
#define PHY_INITIALIZED 1
|
||||
|
||||
/*
|
||||
* During init(400KHz) phy_settings will be called with 200MHZ clock
|
||||
* To avoid incorrectly setting the phy for init(400KHZ) "phy_power_sts" is used.
|
||||
* When actual clock is set always phy is powered off once and then powered on.
|
||||
* (sdhci_arasan_set_clock). That feature will be used to identify whether the
|
||||
* settings are for init phy_power_on or actual clock phy_power_on
|
||||
* 0 --> init settings
|
||||
* 1 --> actual settings
|
||||
*/
|
||||
|
||||
struct thunderbay_emmc_phy {
|
||||
void __iomem *reg_base;
|
||||
struct clk *emmcclk;
|
||||
int phy_power_sts;
|
||||
};
|
||||
|
||||
static inline void update_reg(struct thunderbay_emmc_phy *tbh_phy, u32 offset,
|
||||
u32 mask, u32 shift, u32 val)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
tmp = readl(tbh_phy->reg_base + offset);
|
||||
tmp &= ~mask;
|
||||
tmp |= val << shift;
|
||||
writel(tmp, tbh_phy->reg_base + offset);
|
||||
}
|
||||
|
||||
static int thunderbay_emmc_phy_power(struct phy *phy, bool power_on)
|
||||
{
|
||||
struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
|
||||
unsigned int freqsel = FREQSEL_200M_170M;
|
||||
unsigned long rate;
|
||||
static int lock;
|
||||
u32 val;
|
||||
int ret;
|
||||
|
||||
/* Disable DLL */
|
||||
rate = clk_get_rate(tbh_phy->emmcclk);
|
||||
switch (rate) {
|
||||
case 200000000:
|
||||
/* lock dll only when it is used, i.e only if SEL_DLY_TXCLK/RXCLK are 0 */
|
||||
update_reg(tbh_phy, PHY_CFG_0, DLL_EN_MASK, DLL_EN_SHIFT, 0x0);
|
||||
break;
|
||||
|
||||
/* dll lock not required for other frequencies */
|
||||
case 50000000 ... 52000000:
|
||||
case 400000:
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
if (!power_on)
|
||||
return 0;
|
||||
|
||||
rate = clk_get_rate(tbh_phy->emmcclk);
|
||||
switch (rate) {
|
||||
case 170000001 ... 200000000:
|
||||
freqsel = FREQSEL_200M_170M;
|
||||
break;
|
||||
|
||||
case 140000001 ... 170000000:
|
||||
freqsel = FREQSEL_170M_140M;
|
||||
break;
|
||||
|
||||
case 110000001 ... 140000000:
|
||||
freqsel = FREQSEL_140M_110M;
|
||||
break;
|
||||
|
||||
case 80000001 ... 110000000:
|
||||
freqsel = FREQSEL_110M_80M;
|
||||
break;
|
||||
|
||||
case 50000000 ... 80000000:
|
||||
freqsel = FREQSEL_80M_50M;
|
||||
break;
|
||||
|
||||
case 250000001 ... 275000000:
|
||||
freqsel = FREQSEL_275M_250M;
|
||||
break;
|
||||
|
||||
case 225000001 ... 250000000:
|
||||
freqsel = FREQSEL_250M_225M;
|
||||
break;
|
||||
|
||||
case 200000001 ... 225000000:
|
||||
freqsel = FREQSEL_225M_200M;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
/* Clock rate is checked against upper limit. It may fall low during init */
|
||||
if (rate > 200000000)
|
||||
dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
|
||||
|
||||
udelay(5);
|
||||
|
||||
if (lock == 0) {
|
||||
/* PDB will be done only once per boot */
|
||||
update_reg(tbh_phy, PHY_CFG_0, PWR_DOWN_MASK,
|
||||
PWR_DOWN_SHIFT, 0x1);
|
||||
lock = 1;
|
||||
/*
|
||||
* According to the user manual, it asks driver to wait 5us for
|
||||
* calpad busy trimming. However it is documented that this value is
|
||||
* PVT(A.K.A. process, voltage and temperature) relevant, so some
|
||||
* failure cases are found which indicates we should be more tolerant
|
||||
* to calpad busy trimming.
|
||||
*/
|
||||
ret = readl_poll_timeout(tbh_phy->reg_base + PHY_STAT,
|
||||
val, (val & CAL_DONE), 10, 50);
|
||||
if (ret) {
|
||||
dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
rate = clk_get_rate(tbh_phy->emmcclk);
|
||||
switch (rate) {
|
||||
case 200000000:
|
||||
/* Set frequency of the DLL operation */
|
||||
update_reg(tbh_phy, PHY_CFG_2, SEL_FREQ_MASK, SEL_FREQ_SHIFT, freqsel);
|
||||
|
||||
/* Enable DLL */
|
||||
update_reg(tbh_phy, PHY_CFG_0, DLL_EN_MASK, DLL_EN_SHIFT, 0x1);
|
||||
|
||||
/*
|
||||
* After enabling analog DLL circuits docs say that we need 10.2 us if
|
||||
* our source clock is at 50 MHz and that lock time scales linearly
|
||||
* with clock speed. If we are powering on the PHY and the card clock
|
||||
* is super slow (like 100kHz) this could take as long as 5.1 ms as
|
||||
* per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
|
||||
* hopefully we won't be running at 100 kHz, but we should still make
|
||||
* sure we wait long enough.
|
||||
*
|
||||
* NOTE: There appear to be corner cases where the DLL seems to take
|
||||
* extra long to lock for reasons that aren't understood. In some
|
||||
* extreme cases we've seen it take up to over 10ms (!). We'll be
|
||||
* generous and give it 50ms.
|
||||
*/
|
||||
ret = readl_poll_timeout(tbh_phy->reg_base + PHY_STAT,
|
||||
val, (val & DLL_RDY), 10, 50 * USEC_PER_MSEC);
|
||||
if (ret) {
|
||||
dev_err(&phy->dev, "dllrdy failed, ret=%d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int thunderbay_emmc_phy_init(struct phy *phy)
|
||||
{
|
||||
struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
|
||||
|
||||
tbh_phy->emmcclk = clk_get(&phy->dev, "emmcclk");
|
||||
|
||||
return PTR_ERR_OR_ZERO(tbh_phy->emmcclk);
|
||||
}
|
||||
|
||||
static int thunderbay_emmc_phy_exit(struct phy *phy)
|
||||
{
|
||||
struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
|
||||
|
||||
clk_put(tbh_phy->emmcclk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int thunderbay_emmc_phy_power_on(struct phy *phy)
|
||||
{
|
||||
struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
|
||||
unsigned long rate;
|
||||
|
||||
/* Overwrite capability bits configurable in bootloader */
|
||||
update_reg(tbh_phy, CTRL_CFG_0,
|
||||
SUPPORT_HS_MASK, SUPPORT_HS_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, CTRL_CFG_0,
|
||||
SUPPORT_8B_MASK, SUPPORT_8B_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, CTRL_CFG_1,
|
||||
SUPPORT_SDR50_MASK, SUPPORT_SDR50_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, CTRL_CFG_1,
|
||||
SUPPORT_DDR50_MASK, SUPPORT_DDR50_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, CTRL_CFG_1,
|
||||
SUPPORT_SDR104_MASK, SUPPORT_SDR104_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, CTRL_CFG_1,
|
||||
SUPPORT_HS400_MASK, SUPPORT_HS400_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, CTRL_CFG_1,
|
||||
SUPPORT_64B_MASK, SUPPORT_64B_SHIFT, 0x1);
|
||||
|
||||
if (tbh_phy->phy_power_sts == PHY_UNINITIALIZED) {
|
||||
/* Indicates initialization, settings for init, same as 400KHZ setting */
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK, SEL_DLY_TXCLK_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK, SEL_DLY_RXCLK_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK, ITAP_DLY_ENA_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK, ITAP_DLY_SEL_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK, OTAP_DLY_ENA_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK, OTAP_DLY_SEL_SHIFT, 0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK, DLL_TRIM_ICP_SHIFT, 0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, DR_TY_SHIFT, 0x1);
|
||||
|
||||
} else if (tbh_phy->phy_power_sts == PHY_INITIALIZED) {
|
||||
/* Indicates actual clock setting */
|
||||
rate = clk_get_rate(tbh_phy->emmcclk);
|
||||
switch (rate) {
|
||||
case 200000000:
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
|
||||
SEL_DLY_TXCLK_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
|
||||
SEL_DLY_RXCLK_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
|
||||
ITAP_DLY_ENA_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
|
||||
ITAP_DLY_SEL_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
|
||||
OTAP_DLY_ENA_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
|
||||
OTAP_DLY_SEL_SHIFT, 2);
|
||||
update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
|
||||
DLL_TRIM_ICP_SHIFT, 0x8);
|
||||
update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK,
|
||||
DR_TY_SHIFT, 0x1);
|
||||
/* For HS400 only */
|
||||
update_reg(tbh_phy, PHY_CFG_2, SEL_STRB_MASK,
|
||||
SEL_STRB_SHIFT, STRB);
|
||||
break;
|
||||
|
||||
case 50000000 ... 52000000:
|
||||
/* For both HS and DDR52 this setting works */
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
|
||||
SEL_DLY_TXCLK_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
|
||||
SEL_DLY_RXCLK_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
|
||||
ITAP_DLY_ENA_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
|
||||
ITAP_DLY_SEL_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
|
||||
OTAP_DLY_ENA_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
|
||||
OTAP_DLY_SEL_SHIFT, 4);
|
||||
update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
|
||||
DLL_TRIM_ICP_SHIFT, 0x8);
|
||||
update_reg(tbh_phy, PHY_CFG_0,
|
||||
DR_TY_MASK, DR_TY_SHIFT, 0x1);
|
||||
break;
|
||||
|
||||
case 400000:
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
|
||||
SEL_DLY_TXCLK_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
|
||||
SEL_DLY_RXCLK_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
|
||||
ITAP_DLY_ENA_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
|
||||
ITAP_DLY_SEL_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
|
||||
OTAP_DLY_ENA_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
|
||||
OTAP_DLY_SEL_SHIFT, 0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
|
||||
DLL_TRIM_ICP_SHIFT, 0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, DR_TY_SHIFT, 0x1);
|
||||
break;
|
||||
|
||||
default:
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
|
||||
SEL_DLY_TXCLK_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
|
||||
SEL_DLY_RXCLK_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
|
||||
ITAP_DLY_ENA_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
|
||||
ITAP_DLY_SEL_SHIFT, 0x0);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
|
||||
OTAP_DLY_ENA_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
|
||||
OTAP_DLY_SEL_SHIFT, 2);
|
||||
update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
|
||||
DLL_TRIM_ICP_SHIFT, 0x8);
|
||||
update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK,
|
||||
DR_TY_SHIFT, 0x1);
|
||||
break;
|
||||
}
|
||||
/* Reset, init seq called without phy_power_off, this indicates init seq */
|
||||
tbh_phy->phy_power_sts = PHY_UNINITIALIZED;
|
||||
}
|
||||
|
||||
update_reg(tbh_phy, PHY_CFG_0, RETRIM_EN_MASK, RETRIM_EN_SHIFT, 0x1);
|
||||
update_reg(tbh_phy, PHY_CFG_0, RETRIM_MASK, RETRIM_SHIFT, 0x0);
|
||||
|
||||
return thunderbay_emmc_phy_power(phy, 1);
|
||||
}
|
||||
|
||||
static int thunderbay_emmc_phy_power_off(struct phy *phy)
|
||||
{
|
||||
struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
|
||||
|
||||
tbh_phy->phy_power_sts = PHY_INITIALIZED;
|
||||
|
||||
return thunderbay_emmc_phy_power(phy, 0);
|
||||
}
|
||||
|
||||
static const struct phy_ops thunderbay_emmc_phy_ops = {
|
||||
.init = thunderbay_emmc_phy_init,
|
||||
.exit = thunderbay_emmc_phy_exit,
|
||||
.power_on = thunderbay_emmc_phy_power_on,
|
||||
.power_off = thunderbay_emmc_phy_power_off,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static const struct of_device_id thunderbay_emmc_phy_of_match[] = {
|
||||
{ .compatible = "intel,thunderbay-emmc-phy",
|
||||
(void *)&thunderbay_emmc_phy_ops },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, thunderbay_emmc_phy_of_match);
|
||||
|
||||
static int thunderbay_emmc_phy_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct thunderbay_emmc_phy *tbh_phy;
|
||||
struct phy_provider *phy_provider;
|
||||
struct device *dev = &pdev->dev;
|
||||
const struct of_device_id *id;
|
||||
struct phy *generic_phy;
|
||||
struct resource *res;
|
||||
|
||||
if (!dev->of_node)
|
||||
return -ENODEV;
|
||||
|
||||
tbh_phy = devm_kzalloc(dev, sizeof(*tbh_phy), GFP_KERNEL);
|
||||
if (!tbh_phy)
|
||||
return -ENOMEM;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
tbh_phy->reg_base = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(tbh_phy->reg_base)) {
|
||||
dev_err(&pdev->dev, "region map failed\n");
|
||||
return PTR_ERR(tbh_phy->reg_base);
|
||||
}
|
||||
|
||||
tbh_phy->phy_power_sts = PHY_UNINITIALIZED;
|
||||
id = of_match_node(thunderbay_emmc_phy_of_match, pdev->dev.of_node);
|
||||
if (!id) {
|
||||
dev_err(dev, "failed to get match_node\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
generic_phy = devm_phy_create(dev, dev->of_node, id->data);
|
||||
if (IS_ERR(generic_phy)) {
|
||||
dev_err(dev, "failed to create PHY\n");
|
||||
return PTR_ERR(generic_phy);
|
||||
}
|
||||
|
||||
phy_set_drvdata(generic_phy, tbh_phy);
|
||||
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
||||
|
||||
return PTR_ERR_OR_ZERO(phy_provider);
|
||||
}
|
||||
|
||||
static struct platform_driver thunderbay_emmc_phy_driver = {
|
||||
.probe = thunderbay_emmc_phy_probe,
|
||||
.driver = {
|
||||
.name = "thunderbay-emmc-phy",
|
||||
.of_match_table = thunderbay_emmc_phy_of_match,
|
||||
},
|
||||
};
|
||||
module_platform_driver(thunderbay_emmc_phy_driver);
|
||||
|
||||
MODULE_AUTHOR("Nandhini S <nandhini.srikandan@intel.com>");
|
||||
MODULE_AUTHOR("Rashmi A <rashmi.a@intel.com>");
|
||||
MODULE_DESCRIPTION("Intel Thunder Bay eMMC PHY driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Загрузка…
Ссылка в новой задаче