thermal: qoriq: add thermal monitor unit version 2 support
Thermal Monitor Unit v2 is introduced on new Layscape SoC. Compared to v1, TMUv2 has a little different register layout and digital output is fairly linear. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191011020534.334-1-andy.tang@nxp.com
This commit is contained in:
Yuantian Tang
Daniel Lezcano
Родитель
86bd20a5a5
Коммит
9809797b93
|
|
@ -13,7 +13,16 @@
|
|||
|
||||
#include "thermal_core.h"
|
||||
|
||||
#define SITES_MAX 16
|
||||
#define SITES_MAX 16
|
||||
#define TMR_DISABLE 0x0
|
||||
#define TMR_ME 0x80000000
|
||||
#define TMR_ALPF 0x0c000000
|
||||
#define TMR_ALPF_V2 0x03000000
|
||||
#define TMTMIR_DEFAULT 0x0000000f
|
||||
#define TIER_DISABLE 0x0
|
||||
#define TEUMR0_V2 0x51009c00
|
||||
#define TMU_VER1 0x1
|
||||
#define TMU_VER2 0x2
|
||||
|
||||
/*
|
||||
* QorIQ TMU Registers
|
||||
|
|
@ -24,17 +33,12 @@ struct qoriq_tmu_site_regs {
|
|||
u8 res0[0x8];
|
||||
};
|
||||
|
||||
struct qoriq_tmu_regs {
|
||||
struct qoriq_tmu_regs_v1 {
|
||||
u32 tmr; /* Mode Register */
|
||||
#define TMR_DISABLE 0x0
|
||||
#define TMR_ME 0x80000000
|
||||
#define TMR_ALPF 0x0c000000
|
||||
u32 tsr; /* Status Register */
|
||||
u32 tmtmir; /* Temperature measurement interval Register */
|
||||
#define TMTMIR_DEFAULT 0x0000000f
|
||||
u8 res0[0x14];
|
||||
u32 tier; /* Interrupt Enable Register */
|
||||
#define TIER_DISABLE 0x0
|
||||
u32 tidr; /* Interrupt Detect Register */
|
||||
u32 tiscr; /* Interrupt Site Capture Register */
|
||||
u32 ticscr; /* Interrupt Critical Site Capture Register */
|
||||
|
|
@ -54,10 +58,50 @@ struct qoriq_tmu_regs {
|
|||
u32 ipbrr0; /* IP Block Revision Register 0 */
|
||||
u32 ipbrr1; /* IP Block Revision Register 1 */
|
||||
u8 res6[0x310];
|
||||
u32 ttr0cr; /* Temperature Range 0 Control Register */
|
||||
u32 ttr1cr; /* Temperature Range 1 Control Register */
|
||||
u32 ttr2cr; /* Temperature Range 2 Control Register */
|
||||
u32 ttr3cr; /* Temperature Range 3 Control Register */
|
||||
u32 ttrcr[4]; /* Temperature Range Control Register */
|
||||
};
|
||||
|
||||
struct qoriq_tmu_regs_v2 {
|
||||
u32 tmr; /* Mode Register */
|
||||
u32 tsr; /* Status Register */
|
||||
u32 tmsr; /* monitor site register */
|
||||
u32 tmtmir; /* Temperature measurement interval Register */
|
||||
u8 res0[0x10];
|
||||
u32 tier; /* Interrupt Enable Register */
|
||||
u32 tidr; /* Interrupt Detect Register */
|
||||
u8 res1[0x8];
|
||||
u32 tiiscr; /* interrupt immediate site capture register */
|
||||
u32 tiascr; /* interrupt average site capture register */
|
||||
u32 ticscr; /* Interrupt Critical Site Capture Register */
|
||||
u32 res2;
|
||||
u32 tmhtcr; /* monitor high temperature capture register */
|
||||
u32 tmltcr; /* monitor low temperature capture register */
|
||||
u32 tmrtrcr; /* monitor rising temperature rate capture register */
|
||||
u32 tmftrcr; /* monitor falling temperature rate capture register */
|
||||
u32 tmhtitr; /* High Temperature Immediate Threshold */
|
||||
u32 tmhtatr; /* High Temperature Average Threshold */
|
||||
u32 tmhtactr; /* High Temperature Average Crit Threshold */
|
||||
u32 res3;
|
||||
u32 tmltitr; /* monitor low temperature immediate threshold */
|
||||
u32 tmltatr; /* monitor low temperature average threshold register */
|
||||
u32 tmltactr; /* monitor low temperature average critical threshold */
|
||||
u32 res4;
|
||||
u32 tmrtrctr; /* monitor rising temperature rate critical threshold */
|
||||
u32 tmftrctr; /* monitor falling temperature rate critical threshold*/
|
||||
u8 res5[0x8];
|
||||
u32 ttcfgr; /* Temperature Configuration Register */
|
||||
u32 tscfgr; /* Sensor Configuration Register */
|
||||
u8 res6[0x78];
|
||||
struct qoriq_tmu_site_regs site[SITES_MAX];
|
||||
u8 res7[0x9f8];
|
||||
u32 ipbrr0; /* IP Block Revision Register 0 */
|
||||
u32 ipbrr1; /* IP Block Revision Register 1 */
|
||||
u8 res8[0x300];
|
||||
u32 teumr0;
|
||||
u32 teumr1;
|
||||
u32 teumr2;
|
||||
u32 res9;
|
||||
u32 ttrcr[4]; /* Temperature Range Control Register */
|
||||
};
|
||||
|
||||
struct qoriq_tmu_data;
|
||||
|
|
@ -72,7 +116,9 @@ struct qoriq_sensor {
|
|||
};
|
||||
|
||||
struct qoriq_tmu_data {
|
||||
struct qoriq_tmu_regs __iomem *regs;
|
||||
int ver;
|
||||
struct qoriq_tmu_regs_v1 __iomem *regs;
|
||||
struct qoriq_tmu_regs_v2 __iomem *regs_v2;
|
||||
struct clk *clk;
|
||||
bool little_endian;
|
||||
struct qoriq_sensor *sensor[SITES_MAX];
|
||||
|
|
@ -132,12 +178,23 @@ static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
|
|||
return PTR_ERR(qdata->sensor[id]->tzd);
|
||||
}
|
||||
|
||||
sites |= 0x1 << (15 - id);
|
||||
if (qdata->ver == TMU_VER1)
|
||||
sites |= 0x1 << (15 - id);
|
||||
else
|
||||
sites |= 0x1 << id;
|
||||
}
|
||||
|
||||
/* Enable monitoring */
|
||||
if (sites != 0)
|
||||
tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
|
||||
if (sites != 0) {
|
||||
if (qdata->ver == TMU_VER1) {
|
||||
tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
|
||||
&qdata->regs->tmr);
|
||||
} else {
|
||||
tmu_write(qdata, sites, &qdata->regs_v2->tmsr);
|
||||
tmu_write(qdata, TMR_ME | TMR_ALPF_V2,
|
||||
&qdata->regs_v2->tmr);
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -150,16 +207,21 @@ static int qoriq_tmu_calibration(struct platform_device *pdev)
|
|||
struct device_node *np = pdev->dev.of_node;
|
||||
struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
|
||||
|
||||
if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
|
||||
dev_err(&pdev->dev, "missing calibration range.\n");
|
||||
return -ENODEV;
|
||||
len = of_property_count_u32_elems(np, "fsl,tmu-range");
|
||||
if (len < 0 || len > 4) {
|
||||
dev_err(&pdev->dev, "invalid range data.\n");
|
||||
return len;
|
||||
}
|
||||
|
||||
val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
|
||||
if (val != 0) {
|
||||
dev_err(&pdev->dev, "failed to read range data.\n");
|
||||
return val;
|
||||
}
|
||||
|
||||
/* Init temperature range registers */
|
||||
tmu_write(data, range[0], &data->regs->ttr0cr);
|
||||
tmu_write(data, range[1], &data->regs->ttr1cr);
|
||||
tmu_write(data, range[2], &data->regs->ttr2cr);
|
||||
tmu_write(data, range[3], &data->regs->ttr3cr);
|
||||
for (i = 0; i < len; i++)
|
||||
tmu_write(data, range[i], &data->regs->ttrcr[i]);
|
||||
|
||||
calibration = of_get_property(np, "fsl,tmu-calibration", &len);
|
||||
if (calibration == NULL || len % 8) {
|
||||
|
|
@ -183,7 +245,12 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
|
|||
tmu_write(data, TIER_DISABLE, &data->regs->tier);
|
||||
|
||||
/* Set update_interval */
|
||||
tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
|
||||
if (data->ver == TMU_VER1) {
|
||||
tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
|
||||
} else {
|
||||
tmu_write(data, TMTMIR_DEFAULT, &data->regs_v2->tmtmir);
|
||||
tmu_write(data, TEUMR0_V2, &data->regs_v2->teumr0);
|
||||
}
|
||||
|
||||
/* Disable monitoring */
|
||||
tmu_write(data, TMR_DISABLE, &data->regs->tmr);
|
||||
|
|
@ -192,6 +259,7 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
|
|||
static int qoriq_tmu_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
u32 ver;
|
||||
struct qoriq_tmu_data *data;
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
|
||||
|
|
@ -220,6 +288,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
|
|||
return ret;
|
||||
}
|
||||
|
||||
/* version register offset at: 0xbf8 on both v1 and v2 */
|
||||
ver = tmu_read(data, &data->regs->ipbrr0);
|
||||
data->ver = (ver >> 8) & 0xff;
|
||||
if (data->ver == TMU_VER2)
|
||||
data->regs_v2 = (void __iomem *)data->regs;
|
||||
|
||||
qoriq_tmu_init_device(data); /* TMU initialization */
|
||||
|
||||
ret = qoriq_tmu_calibration(pdev); /* TMU calibration */
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче