xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers

PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will
remove the xhci controller from the PCI bus when the last USB device is
disconnected.

Add a flag to indicate that the host is being removed to avoid queueing
configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts
For static xhci controllers the configure_endpoint command is not needed
in the removal case as everything will be returned, freed, and the
controller is reset.

For now the flag is only set for PCI connected host controllers.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/xhci-pci.c

@@ -304,6 +304,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
 	struct xhci_hcd *xhci;
 
 	xhci = hcd_to_xhci(pci_get_drvdata(dev));
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
 	if (xhci->shared_hcd) {
 		usb_remove_hcd(xhci->shared_hcd);
 		usb_put_hcd(xhci->shared_hcd);

drivers/usb/host/xhci-ring.c

@@ -4004,7 +4004,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
 	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
 	int ret;
 
-	if (xhci->xhc_state) {
+	if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+		(xhci->xhc_state & XHCI_STATE_HALTED)) {
 		xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
 		return -ESHUTDOWN;
 	}

drivers/usb/host/xhci.c

@@ -147,7 +147,8 @@ static int xhci_start(struct xhci_hcd *xhci)
 				"waited %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
 	if (!ret)
-		xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+		/* clear state flags. Including dying, halted or removing */
+		xhci->xhc_state = 0;
 
 	return ret;
 }
@@ -2773,7 +2774,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	if (ret <= 0)
 		return ret;
 	xhci = hcd_to_xhci(hcd);
-	if (xhci->xhc_state & XHCI_STATE_DYING)
+	if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+		(xhci->xhc_state & XHCI_STATE_REMOVING))
 		return -ENODEV;
 
 	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
@@ -3820,7 +3822,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
 	mutex_lock(&xhci->mutex);
 
-	if (xhci->xhc_state)	/* dying or halted */
+	if (xhci->xhc_state)	/* dying, removing or halted */
 		goto out;
 
 	if (!udev->slot_id) {

drivers/usb/host/xhci.h

@@ -1605,6 +1605,7 @@ struct xhci_hcd {
  */
 #define XHCI_STATE_DYING	(1 << 0)
 #define XHCI_STATE_HALTED	(1 << 1)
+#define XHCI_STATE_REMOVING	(1 << 2)
 	/* Statistics */
 	int			error_bitmask;
 	unsigned int		quirks;