arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength

The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.

The qup_spi2_default pin configuration uses alreaady the second method
with a "pinmux" child, so configure drive-strength similarly in
"pinconf".  Otherwise the PIN drive strength would not be applied.

Fixes: 8d23a00404 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-2-krzysztof.kozlowski@linaro.org

arch/arm64/boot/dts/qcom/sdm845-db845c.dts

@@ -1123,7 +1123,10 @@
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 &qup_spi2_default {
-	drive-strength = <16>;
+	pinconf {
+		pins = "gpio27", "gpio28", "gpio29", "gpio30";
+		drive-strength = <16>;
+	};
 };
 
 &qup_uart3_default{