ARM: dts: LG Optimus Black codename sniper basic support

The LG Optimus Black codename sniper is a smartphone that was designed and
manufactured by LG Electronics (LGE) and released back in 2011.
It is using an OMAP3630 SoC, GP version.

This adds devicetree support for the device, with only a few basic features
supported, such as debug uart, i2c, internal emmc and external mmc.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/Makefile

@@ -460,6 +460,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-sbc-t3517.dtb \
 	omap3-sbc-t3530.dtb \
 	omap3-sbc-t3730.dtb \
+	omap3-sniper.dtb \
 	omap3-thunder.dtb \
 	omap3-zoom3.dtb
 dtb-$(CONFIG_SOC_TI81XX) += \

arch/arm/boot/dts/omap3-sniper.dts

@@ -0,0 +1,215 @@
+/*
+ * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "LG Optimus Black";
+	compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx */
+		>;
+	};
+
+	dp3t_sel_pins: pinmux_dp3t_sel_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4)	/* gpio_161 */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* gpio_162 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	lp8720_en_pin: pinmux_lp8720_en_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4)	/* gpio_37 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0)	/* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat7 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+
+	mmc1_cd_pin: pinmux_mmc1_cd_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4)		/* gpio_10 */
+		>;
+	};
+};
+
+&gpio2 {
+	ti,no-reset-on-init;
+};
+
+&gpio5 {
+	ti,no-reset-on-init;
+};
+
+&gpio6 {
+	ti,no-reset-on-init;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &dp3t_sel_pins>;
+
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		power {
+			compatible = "ti,twl4030-power";
+			ti,use_poweroff;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	lp8720@7d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lp8720_en_pin>;
+
+		compatible = "ti,lp8720";
+		reg = <0x7d>;
+
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */
+
+		lp8720_ldo1: ldo1 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>;
+	vmmc-supply = <&lp8720_ldo1>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */
+	bus-width = <4>;
+};
+
+&mmc2 {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+/*
+ * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3.
+ * When not powered, these sensors cause the I2C3 clock to stay low at all times,
+ * making it impossible to reach other devices on I2C3.
+ */
+
+&vaux2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+};
+
+&vdac {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};