microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

[PATCH] x86: SMP alternatives 

Implement SMP alternatives, i.e.  switching at runtime between different
code versions for UP and SMP.  The code can patch both SMP->UP and UP->SMP.
The UP->SMP case is useful for CPU hotplug.

With CONFIG_CPU_HOTPLUG enabled the code switches to UP at boot time and
when the number of CPUs goes down to 1, and switches to SMP when the number
of CPUs goes up to 2.

Without CONFIG_CPU_HOTPLUG or on non-SMP-capable systems the code is
patched once at boot time (if needed) and the tables are released
afterwards.

The changes in detail:

  * The current alternatives bits are moved to a separate file,
    the SMP alternatives code is added there.

  * The patch adds some new elf sections to the kernel:
    .smp_altinstructions
	like .altinstructions, also contains a list
	of alt_instr structs.
    .smp_altinstr_replacement
	like .altinstr_replacement, but also has some space to
	save original instruction before replaving it.
    .smp_locks
	list of pointers to lock prefixes which can be nop'ed
	out on UP.
    The first two are used to replace more complex instruction
    sequences such as spinlocks and semaphores.  It would be possible
    to deal with the lock prefixes with that as well, but by handling
    them as special case the table sizes become much smaller.

 * The sections are page-aligned and padded up to page size, so they
   can be free if they are not needed.

 * Splitted the code to release init pages to a separate function and
   use it to release the elf sections if they are unused.

Signed-off-by: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Gerd Hoffmann 2006-03-23 02:59:32 -08:00 коммит произвёл Linus Torvalds
Родитель 4d7d8c82c1
Коммит 9a0b5817ad
20 изменённых файлов: 605 добавлений и 259 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
arch/i386/kernel/Makefile
Просмотреть файл

@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
quirks.o i8237.o topology.o
quirks.o i8237.o topology.o alternative.o
obj-y += cpu/
obj-y += timers/

321
arch/i386/kernel/alternative.c Normal file
Просмотреть файл

@ -0,0 +1,321 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <asm/alternative.h>
#include <asm/sections.h>
#define DEBUG 0
#if DEBUG
# define DPRINTK(fmt, args...) printk(fmt, args)
#else
# define DPRINTK(fmt, args...)
#endif
/* Use inline assembly to define this because the nops are defined
as inline assembly strings in the include files and we cannot
get them easily into strings. */
asm("\t.data\nintelnops: "
GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
GENERIC_NOP7 GENERIC_NOP8);
asm("\t.data\nk8nops: "
K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
K8_NOP7 K8_NOP8);
asm("\t.data\nk7nops: "
K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
K7_NOP7 K7_NOP8);
extern unsigned char intelnops[], k8nops[], k7nops[];
static unsigned char *intel_nops[ASM_NOP_MAX+1] = {
NULL,
intelnops,
intelnops + 1,
intelnops + 1 + 2,
intelnops + 1 + 2 + 3,
intelnops + 1 + 2 + 3 + 4,
intelnops + 1 + 2 + 3 + 4 + 5,
intelnops + 1 + 2 + 3 + 4 + 5 + 6,
intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
};
static unsigned char *k8_nops[ASM_NOP_MAX+1] = {
NULL,
k8nops,
k8nops + 1,
k8nops + 1 + 2,
k8nops + 1 + 2 + 3,
k8nops + 1 + 2 + 3 + 4,
k8nops + 1 + 2 + 3 + 4 + 5,
k8nops + 1 + 2 + 3 + 4 + 5 + 6,
k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
};
static unsigned char *k7_nops[ASM_NOP_MAX+1] = {
NULL,
k7nops,
k7nops + 1,
k7nops + 1 + 2,
k7nops + 1 + 2 + 3,
k7nops + 1 + 2 + 3 + 4,
k7nops + 1 + 2 + 3 + 4 + 5,
k7nops + 1 + 2 + 3 + 4 + 5 + 6,
k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
};
static struct nop {
int cpuid;
unsigned char **noptable;
} noptypes[] = {
{ X86_FEATURE_K8, k8_nops },
{ X86_FEATURE_K7, k7_nops },
{ -1, NULL }
};
extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
extern struct alt_instr __smp_alt_instructions[], __smp_alt_instructions_end[];
extern u8 *__smp_locks[], *__smp_locks_end[];
extern u8 __smp_alt_begin[], __smp_alt_end[];
static unsigned char** find_nop_table(void)
{
unsigned char **noptable = intel_nops;
int i;
for (i = 0; noptypes[i].cpuid >= 0; i++) {
if (boot_cpu_has(noptypes[i].cpuid)) {
noptable = noptypes[i].noptable;
break;
}
}
return noptable;
}
/* Replace instructions with better alternatives for this CPU type.
This runs before SMP is initialized to avoid SMP problems with
self modifying code. This implies that assymetric systems where
APs have less capabilities than the boot processor are not handled.
Tough. Make sure you disable such features by hand. */
void apply_alternatives(struct alt_instr *start, struct alt_instr *end)
{
unsigned char **noptable = find_nop_table();
struct alt_instr *a;
int diff, i, k;
DPRINTK("%s: alt table %p -> %p\n", __FUNCTION__, start, end);
for (a = start; a < end; a++) {
BUG_ON(a->replacementlen > a->instrlen);
if (!boot_cpu_has(a->cpuid))
continue;
memcpy(a->instr, a->replacement, a->replacementlen);
diff = a->instrlen - a->replacementlen;
/* Pad the rest with nops */
for (i = a->replacementlen; diff > 0; diff -= k, i += k) {
k = diff;
if (k > ASM_NOP_MAX)
k = ASM_NOP_MAX;
memcpy(a->instr + i, noptable[k], k);
}
}
}
static void alternatives_smp_save(struct alt_instr *start, struct alt_instr *end)
{
struct alt_instr *a;
DPRINTK("%s: alt table %p-%p\n", __FUNCTION__, start, end);
for (a = start; a < end; a++) {
memcpy(a->replacement + a->replacementlen,
a->instr,
a->instrlen);
}
}
static void alternatives_smp_apply(struct alt_instr *start, struct alt_instr *end)
{
struct alt_instr *a;
for (a = start; a < end; a++) {
memcpy(a->instr,
a->replacement + a->replacementlen,
a->instrlen);
}
}
static void alternatives_smp_lock(u8 **start, u8 **end, u8 *text, u8 *text_end)
{
u8 **ptr;
for (ptr = start; ptr < end; ptr++) {
if (*ptr < text)
continue;
if (*ptr > text_end)
continue;
**ptr = 0xf0; /* lock prefix */
};
}
static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8 *text_end)
{
unsigned char **noptable = find_nop_table();
u8 **ptr;
for (ptr = start; ptr < end; ptr++) {
if (*ptr < text)
continue;
if (*ptr > text_end)
continue;
**ptr = noptable[1][0];
};
}
struct smp_alt_module {
/* what is this ??? */
struct module *mod;
char *name;
/* ptrs to lock prefixes */
u8 **locks;
u8 **locks_end;
/* .text segment, needed to avoid patching init code ;) */
u8 *text;
u8 *text_end;
struct list_head next;
};
static LIST_HEAD(smp_alt_modules);
static DEFINE_SPINLOCK(smp_alt);
static int smp_alt_once = 0;
static int __init bootonly(char *str)
{
smp_alt_once = 1;
return 1;
}
__setup("smp-alt-boot", bootonly);
void alternatives_smp_module_add(struct module *mod, char *name,
void *locks, void *locks_end,
void *text, void *text_end)
{
struct smp_alt_module *smp;
unsigned long flags;
if (smp_alt_once) {
if (boot_cpu_has(X86_FEATURE_UP))
alternatives_smp_unlock(locks, locks_end,
text, text_end);
return;
}
smp = kzalloc(sizeof(*smp), GFP_KERNEL);
if (NULL == smp)
return; /* we'll run the (safe but slow) SMP code then ... */
smp->mod = mod;
smp->name = name;
smp->locks = locks;
smp->locks_end = locks_end;
smp->text = text;
smp->text_end = text_end;
DPRINTK("%s: locks %p -> %p, text %p -> %p, name %s\n",
__FUNCTION__, smp->locks, smp->locks_end,
smp->text, smp->text_end, smp->name);
spin_lock_irqsave(&smp_alt, flags);
list_add_tail(&smp->next, &smp_alt_modules);
if (boot_cpu_has(X86_FEATURE_UP))
alternatives_smp_unlock(smp->locks, smp->locks_end,
smp->text, smp->text_end);
spin_unlock_irqrestore(&smp_alt, flags);
}
void alternatives_smp_module_del(struct module *mod)
{
struct smp_alt_module *item;
unsigned long flags;
if (smp_alt_once)
return;
spin_lock_irqsave(&smp_alt, flags);
list_for_each_entry(item, &smp_alt_modules, next) {
if (mod != item->mod)
continue;
list_del(&item->next);
spin_unlock_irqrestore(&smp_alt, flags);
DPRINTK("%s: %s\n", __FUNCTION__, item->name);
kfree(item);
return;
}
spin_unlock_irqrestore(&smp_alt, flags);
}
void alternatives_smp_switch(int smp)
{
struct smp_alt_module *mod;
unsigned long flags;
if (smp_alt_once)
return;
BUG_ON(!smp && (num_online_cpus() > 1));
spin_lock_irqsave(&smp_alt, flags);
if (smp) {
printk(KERN_INFO "SMP alternatives: switching to SMP code\n");
clear_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability);
clear_bit(X86_FEATURE_UP, cpu_data[0].x86_capability);
alternatives_smp_apply(__smp_alt_instructions,
__smp_alt_instructions_end);
list_for_each_entry(mod, &smp_alt_modules, next)
alternatives_smp_lock(mod->locks, mod->locks_end,
mod->text, mod->text_end);
} else {
printk(KERN_INFO "SMP alternatives: switching to UP code\n");
set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability);
set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability);
apply_alternatives(__smp_alt_instructions,
__smp_alt_instructions_end);
list_for_each_entry(mod, &smp_alt_modules, next)
alternatives_smp_unlock(mod->locks, mod->locks_end,
mod->text, mod->text_end);
}
spin_unlock_irqrestore(&smp_alt, flags);
}
void __init alternative_instructions(void)
{
apply_alternatives(__alt_instructions, __alt_instructions_end);
/* switch to patch-once-at-boottime-only mode and free the
* tables in case we know the number of CPUs will never ever
* change */
#ifdef CONFIG_HOTPLUG_CPU
if (num_possible_cpus() < 2)
smp_alt_once = 1;
#else
smp_alt_once = 1;
#endif
if (smp_alt_once) {
if (1 == num_possible_cpus()) {
printk(KERN_INFO "SMP alternatives: switching to UP code\n");
set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability);
set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability);
apply_alternatives(__smp_alt_instructions,
__smp_alt_instructions_end);
alternatives_smp_unlock(__smp_locks, __smp_locks_end,
_text, _etext);
}
free_init_pages("SMP alternatives",
(unsigned long)__smp_alt_begin,
(unsigned long)__smp_alt_end);
} else {
alternatives_smp_save(__smp_alt_instructions,
__smp_alt_instructions_end);
alternatives_smp_module_add(NULL, "core kernel",
__smp_locks, __smp_locks_end,
_text, _etext);
alternatives_smp_switch(0);
}
}

2
arch/i386/kernel/cpu/proc.c
Просмотреть файл

@ -40,7 +40,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
/* Other (Linux-defined) */
"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
NULL, NULL, NULL, NULL,
"constant_tsc", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
"constant_tsc", "up", NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,

30
arch/i386/kernel/module.c
Просмотреть файл

@ -104,26 +104,38 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
return -ENOEXEC;
}
extern void apply_alternatives(void *start, void *end);
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
{
const Elf_Shdr *s;
const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL;
char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
/* look for .altinstructions to patch */
for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
void *seg;
if (strcmp(".altinstructions", secstrings + s->sh_name))
continue;
seg = (void *)s->sh_addr;
apply_alternatives(seg, seg + s->sh_size);
if (!strcmp(".text", secstrings + s->sh_name))
text = s;
if (!strcmp(".altinstructions", secstrings + s->sh_name))
alt = s;
if (!strcmp(".smp_locks", secstrings + s->sh_name))
locks= s;
}
if (alt) {
/* patch .altinstructions */
void *aseg = (void *)alt->sh_addr;
apply_alternatives(aseg, aseg + alt->sh_size);
}
if (locks && text) {
void *lseg = (void *)locks->sh_addr;
void *tseg = (void *)text->sh_addr;
alternatives_smp_module_add(me, me->name,
lseg, lseg + locks->sh_size,
tseg, tseg + text->sh_size);
}
return 0;
}
void module_arch_cleanup(struct module *mod)
{
alternatives_smp_module_del(mod);
}

8
arch/i386/kernel/semaphore.c
Просмотреть файл

@ -110,11 +110,11 @@ asm(
".align 4\n"
".globl __write_lock_failed\n"
"__write_lock_failed:\n\t"
LOCK "addl $" RW_LOCK_BIAS_STR ",(%eax)\n"
LOCK_PREFIX "addl $" RW_LOCK_BIAS_STR ",(%eax)\n"
"1: rep; nop\n\t"
"cmpl $" RW_LOCK_BIAS_STR ",(%eax)\n\t"
"jne 1b\n\t"
LOCK "subl $" RW_LOCK_BIAS_STR ",(%eax)\n\t"
LOCK_PREFIX "subl $" RW_LOCK_BIAS_STR ",(%eax)\n\t"
"jnz __write_lock_failed\n\t"
"ret"
);
@ -124,11 +124,11 @@ asm(
".align 4\n"
".globl __read_lock_failed\n"
"__read_lock_failed:\n\t"
LOCK "incl (%eax)\n"
LOCK_PREFIX "incl (%eax)\n"
"1: rep; nop\n\t"
"cmpl $1,(%eax)\n\t"
"js 1b\n\t"
LOCK "decl (%eax)\n\t"
LOCK_PREFIX "decl (%eax)\n\t"
"js __read_lock_failed\n\t"
"ret"
);

95
arch/i386/kernel/setup.c
Просмотреть файл

@ -1377,101 +1377,6 @@ static void __init register_memory(void)
pci_mem_start, gapstart, gapsize);
}
/* Use inline assembly to define this because the nops are defined
as inline assembly strings in the include files and we cannot
get them easily into strings. */
asm("\t.data\nintelnops: "
GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
GENERIC_NOP7 GENERIC_NOP8);
asm("\t.data\nk8nops: "
K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
K8_NOP7 K8_NOP8);
asm("\t.data\nk7nops: "
K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
K7_NOP7 K7_NOP8);
extern unsigned char intelnops[], k8nops[], k7nops[];
static unsigned char *intel_nops[ASM_NOP_MAX+1] = {
NULL,
intelnops,
intelnops + 1,
intelnops + 1 + 2,
intelnops + 1 + 2 + 3,
intelnops + 1 + 2 + 3 + 4,
intelnops + 1 + 2 + 3 + 4 + 5,
intelnops + 1 + 2 + 3 + 4 + 5 + 6,
intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
};
static unsigned char *k8_nops[ASM_NOP_MAX+1] = {
NULL,
k8nops,
k8nops + 1,
k8nops + 1 + 2,
k8nops + 1 + 2 + 3,
k8nops + 1 + 2 + 3 + 4,
k8nops + 1 + 2 + 3 + 4 + 5,
k8nops + 1 + 2 + 3 + 4 + 5 + 6,
k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
};
static unsigned char *k7_nops[ASM_NOP_MAX+1] = {
NULL,
k7nops,
k7nops + 1,
k7nops + 1 + 2,
k7nops + 1 + 2 + 3,
k7nops + 1 + 2 + 3 + 4,
k7nops + 1 + 2 + 3 + 4 + 5,
k7nops + 1 + 2 + 3 + 4 + 5 + 6,
k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
};
static struct nop {
int cpuid;
unsigned char **noptable;
} noptypes[] = {
{ X86_FEATURE_K8, k8_nops },
{ X86_FEATURE_K7, k7_nops },
{ -1, NULL }
};
/* Replace instructions with better alternatives for this CPU type.
This runs before SMP is initialized to avoid SMP problems with
self modifying code. This implies that assymetric systems where
APs have less capabilities than the boot processor are not handled.
Tough. Make sure you disable such features by hand. */
void apply_alternatives(void *start, void *end)
{
struct alt_instr *a;
int diff, i, k;
unsigned char **noptable = intel_nops;
for (i = 0; noptypes[i].cpuid >= 0; i++) {
if (boot_cpu_has(noptypes[i].cpuid)) {
noptable = noptypes[i].noptable;
break;
}
}
for (a = start; (void *)a < end; a++) {
if (!boot_cpu_has(a->cpuid))
continue;
BUG_ON(a->replacementlen > a->instrlen);
memcpy(a->instr, a->replacement, a->replacementlen);
diff = a->instrlen - a->replacementlen;
/* Pad the rest with nops */
for (i = a->replacementlen; diff > 0; diff -= k, i += k) {
k = diff;
if (k > ASM_NOP_MAX)
k = ASM_NOP_MAX;
memcpy(a->instr + i, noptable[k], k);
}
}
}
void __init alternative_instructions(void)
{
extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
apply_alternatives(__alt_instructions, __alt_instructions_end);
}
static char * __init machine_specific_memory_setup(void);
#ifdef CONFIG_MCA

3
arch/i386/kernel/smpboot.c
Просмотреть файл

@ -899,6 +899,7 @@ static int __devinit do_boot_cpu(int apicid, int cpu)
unsigned short nmi_high = 0, nmi_low = 0;
++cpucount;
alternatives_smp_switch(1);
/*
* We can't use kernel_thread since we must avoid to
@ -1368,6 +1369,8 @@ void __cpu_die(unsigned int cpu)
/* They ack this in play_dead by setting CPU_DEAD */
if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
printk ("CPU %d is now offline\n", cpu);
if (1 == num_online_cpus())
alternatives_smp_switch(0);
return;
}
msleep(100);

20
arch/i386/kernel/vmlinux.lds.S
Просмотреть файл

@ -68,6 +68,26 @@ SECTIONS
*(.data.init_task)
}
/* might get freed after init */
. = ALIGN(4096);
__smp_alt_begin = .;
__smp_alt_instructions = .;
.smp_altinstructions : AT(ADDR(.smp_altinstructions) - LOAD_OFFSET) {
*(.smp_altinstructions)
}
__smp_alt_instructions_end = .;
. = ALIGN(4);
__smp_locks = .;
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
*(.smp_locks)
}
__smp_locks_end = .;
.smp_altinstr_replacement : AT(ADDR(.smp_altinstr_replacement) - LOAD_OFFSET) {
*(.smp_altinstr_replacement)
}
. = ALIGN(4096);
__smp_alt_end = .;
/* will be freed after init */
. = ALIGN(4096); /* Init code and data */
__init_begin = .;

45
arch/i386/mm/init.c
Просмотреть файл

@ -720,21 +720,6 @@ static int noinline do_test_wp_bit(void)
return flag;
}
void free_initmem(void)
{
unsigned long addr;
addr = (unsigned long)(&__init_begin);
for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
memset((void *)addr, 0xcc, PAGE_SIZE);
free_page(addr);
totalram_pages++;
}
printk (KERN_INFO "Freeing unused kernel memory: %dk freed\n", (__init_end - __init_begin) >> 10);
}
#ifdef CONFIG_DEBUG_RODATA
extern char __start_rodata, __end_rodata;
@ -758,17 +743,31 @@ void mark_rodata_ro(void)
}
#endif
void free_init_pages(char *what, unsigned long begin, unsigned long end)
{
unsigned long addr;
for (addr = begin; addr < end; addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
memset((void *)addr, 0xcc, PAGE_SIZE);
free_page(addr);
totalram_pages++;
}
printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
}
void free_initmem(void)
{
free_init_pages("unused kernel memory",
(unsigned long)(&__init_begin),
(unsigned long)(&__init_end));
}
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
if (start < end)
printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
for (; start < end; start += PAGE_SIZE) {
ClearPageReserved(virt_to_page(start));
init_page_count(virt_to_page(start));
free_page(start);
totalram_pages++;
}
free_init_pages("initrd memory", start, end);
}
#endif

12
arch/um/kernel/um_arch.c
Просмотреть файл

@ -491,6 +491,16 @@ void __init check_bugs(void)
check_devanon();
}
void apply_alternatives(void *start, void *end)
void apply_alternatives(struct alt_instr *start, struct alt_instr *end)
{
}
void alternatives_smp_module_add(struct module *mod, char *name,
void *locks, void *locks_end,
void *text, void *text_end)
{
}
void alternatives_smp_module_del(struct module *mod)
{
}

129
include/asm-i386/alternative.h Normal file
Просмотреть файл

@ -0,0 +1,129 @@
#ifndef _I386_ALTERNATIVE_H
#define _I386_ALTERNATIVE_H
#ifdef __KERNEL__
struct alt_instr {
u8 *instr; /* original instruction */
u8 *replacement;
u8 cpuid; /* cpuid bit set for replacement */
u8 instrlen; /* length of original instruction */
u8 replacementlen; /* length of new instruction, <= instrlen */
u8 pad;
};
extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
struct module;
extern void alternatives_smp_module_add(struct module *mod, char *name,
void *locks, void *locks_end,
void *text, void *text_end);
extern void alternatives_smp_module_del(struct module *mod);
extern void alternatives_smp_switch(int smp);
#endif
/*
* Alternative instructions for different CPU types or capabilities.
*
* This allows to use optimized instructions even on generic binary
* kernels.
*
* length of oldinstr must be longer or equal the length of newinstr
* It can be padded with nops as needed.
*
* For non barrier like inlines please define new variants
* without volatile and memory clobber.
*/
#define alternative(oldinstr, newinstr, feature) \
asm volatile ("661:\n\t" oldinstr "\n662:\n" \
".section .altinstructions,\"a\"\n" \
" .align 4\n" \
" .long 661b\n" /* label */ \
" .long 663f\n" /* new instruction */ \
" .byte %c0\n" /* feature bit */ \
" .byte 662b-661b\n" /* sourcelen */ \
" .byte 664f-663f\n" /* replacementlen */ \
".previous\n" \
".section .altinstr_replacement,\"ax\"\n" \
"663:\n\t" newinstr "\n664:\n" /* replacement */\
".previous" :: "i" (feature) : "memory")
/*
* Alternative inline assembly with input.
*
* Pecularities:
* No memory clobber here.
* Argument numbers start with 1.
* Best is to use constraints that are fixed size (like (%1) ... "r")
* If you use variable sized constraints like "m" or "g" in the
* replacement maake sure to pad to the worst case length.
*/
#define alternative_input(oldinstr, newinstr, feature, input...) \
asm volatile ("661:\n\t" oldinstr "\n662:\n" \
".section .altinstructions,\"a\"\n" \
" .align 4\n" \
" .long 661b\n" /* label */ \
" .long 663f\n" /* new instruction */ \
" .byte %c0\n" /* feature bit */ \
" .byte 662b-661b\n" /* sourcelen */ \
" .byte 664f-663f\n" /* replacementlen */ \
".previous\n" \
".section .altinstr_replacement,\"ax\"\n" \
"663:\n\t" newinstr "\n664:\n" /* replacement */\
".previous" :: "i" (feature), ##input)
/*
* Alternative inline assembly for SMP.
*
* alternative_smp() takes two versions (SMP first, UP second) and is
* for more complex stuff such as spinlocks.
*
* The LOCK_PREFIX macro defined here replaces the LOCK and
* LOCK_PREFIX macros used everywhere in the source tree.
*
* SMP alternatives use the same data structures as the other
* alternatives and the X86_FEATURE_UP flag to indicate the case of a
* UP system running a SMP kernel. The existing apply_alternatives()
* works fine for patching a SMP kernel for UP.
*
* The SMP alternative tables can be kept after boot and contain both
* UP and SMP versions of the instructions to allow switching back to
* SMP at runtime, when hotplugging in a new CPU, which is especially
* useful in virtualized environments.
*
* The very common lock prefix is handled as special case in a
* separate table which is a pure address list without replacement ptr
* and size information. That keeps the table sizes small.
*/
#ifdef CONFIG_SMP
#define alternative_smp(smpinstr, upinstr, args...) \
asm volatile ("661:\n\t" smpinstr "\n662:\n" \
".section .smp_altinstructions,\"a\"\n" \
" .align 4\n" \
" .long 661b\n" /* label */ \
" .long 663f\n" /* new instruction */ \
" .byte 0x68\n" /* X86_FEATURE_UP */ \
" .byte 662b-661b\n" /* sourcelen */ \
" .byte 664f-663f\n" /* replacementlen */ \
".previous\n" \
".section .smp_altinstr_replacement,\"awx\"\n" \
"663:\n\t" upinstr "\n" /* replacement */ \
"664:\n\t.fill 662b-661b,1,0x42\n" /* space for original */ \
".previous" : args)
#define LOCK_PREFIX \
".section .smp_locks,\"a\"\n" \
" .align 4\n" \
" .long 661f\n" /* address */ \
".previous\n" \
"661:\n\tlock; "
#else /* ! CONFIG_SMP */
#define alternative_smp(smpinstr, upinstr, args...) \
asm volatile (upinstr : args)
#define LOCK_PREFIX ""
#endif
#endif /* _I386_ALTERNATIVE_H */

28
include/asm-i386/atomic.h
Просмотреть файл

@ -10,12 +10,6 @@
* resource counting etc..
*/
#ifdef CONFIG_SMP
#define LOCK "lock ; "
#else
#define LOCK ""
#endif
/*
* Make sure gcc doesn't try to be clever and move things around
* on us. We need to use _exactly_ the address the user gave us,
@ -52,7 +46,7 @@ typedef struct { volatile int counter; } atomic_t;
static __inline__ void atomic_add(int i, atomic_t *v)
{
__asm__ __volatile__(
LOCK "addl %1,%0"
LOCK_PREFIX "addl %1,%0"
:"=m" (v->counter)
:"ir" (i), "m" (v->counter));
}
@ -67,7 +61,7 @@ static __inline__ void atomic_add(int i, atomic_t *v)
static __inline__ void atomic_sub(int i, atomic_t *v)
{
__asm__ __volatile__(
LOCK "subl %1,%0"
LOCK_PREFIX "subl %1,%0"
:"=m" (v->counter)
:"ir" (i), "m" (v->counter));
}
@ -86,7 +80,7 @@ static __inline__ int atomic_sub_and_test(int i, atomic_t *v)
unsigned char c;
__asm__ __volatile__(
LOCK "subl %2,%0; sete %1"
LOCK_PREFIX "subl %2,%0; sete %1"
:"=m" (v->counter), "=qm" (c)
:"ir" (i), "m" (v->counter) : "memory");
return c;
@ -101,7 +95,7 @@ static __inline__ int atomic_sub_and_test(int i, atomic_t *v)
static __inline__ void atomic_inc(atomic_t *v)
{
__asm__ __volatile__(
LOCK "incl %0"
LOCK_PREFIX "incl %0"
:"=m" (v->counter)
:"m" (v->counter));
}
@ -115,7 +109,7 @@ static __inline__ void atomic_inc(atomic_t *v)
static __inline__ void atomic_dec(atomic_t *v)
{
__asm__ __volatile__(
LOCK "decl %0"
LOCK_PREFIX "decl %0"
:"=m" (v->counter)
:"m" (v->counter));
}
@ -133,7 +127,7 @@ static __inline__ int atomic_dec_and_test(atomic_t *v)
unsigned char c;
__asm__ __volatile__(
LOCK "decl %0; sete %1"
LOCK_PREFIX "decl %0; sete %1"
:"=m" (v->counter), "=qm" (c)
:"m" (v->counter) : "memory");
return c != 0;
@ -152,7 +146,7 @@ static __inline__ int atomic_inc_and_test(atomic_t *v)
unsigned char c;
__asm__ __volatile__(
LOCK "incl %0; sete %1"
LOCK_PREFIX "incl %0; sete %1"
:"=m" (v->counter), "=qm" (c)
:"m" (v->counter) : "memory");
return c != 0;
@ -172,7 +166,7 @@ static __inline__ int atomic_add_negative(int i, atomic_t *v)
unsigned char c;
__asm__ __volatile__(
LOCK "addl %2,%0; sets %1"
LOCK_PREFIX "addl %2,%0; sets %1"
:"=m" (v->counter), "=qm" (c)
:"ir" (i), "m" (v->counter) : "memory");
return c;
@ -195,7 +189,7 @@ static __inline__ int atomic_add_return(int i, atomic_t *v)
/* Modern 486+ processor */
__i = i;
__asm__ __volatile__(
LOCK "xaddl %0, %1;"
LOCK_PREFIX "xaddl %0, %1;"
:"=r"(i)
:"m"(v->counter), "0"(i));
return i + __i;
@ -242,11 +236,11 @@ static __inline__ int atomic_sub_return(int i, atomic_t *v)
/* These are x86-specific, used by some header files */
#define atomic_clear_mask(mask, addr) \
__asm__ __volatile__(LOCK "andl %0,%1" \
__asm__ __volatile__(LOCK_PREFIX "andl %0,%1" \
: : "r" (~(mask)),"m" (*addr) : "memory")
#define atomic_set_mask(mask, addr) \
__asm__ __volatile__(LOCK "orl %0,%1" \
__asm__ __volatile__(LOCK_PREFIX "orl %0,%1" \
: : "r" (mask),"m" (*(addr)) : "memory")
/* Atomic operations are already serializing on x86 */

7
include/asm-i386/bitops.h
Просмотреть файл

@ -7,6 +7,7 @@
#include <linux/config.h>
#include <linux/compiler.h>
#include <asm/alternative.h>
/*
* These have to be done with inline assembly: that way the bit-setting
@ -16,12 +17,6 @@
* bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
*/
#ifdef CONFIG_SMP
#define LOCK_PREFIX "lock ; "
#else
#define LOCK_PREFIX ""
#endif
#define ADDR (*(volatile long *) addr)
/**

1
include/asm-i386/cpufeature.h
Просмотреть файл

@ -70,6 +70,7 @@
#define X86_FEATURE_P3 (3*32+ 6) /* P3 */
#define X86_FEATURE_P4 (3*32+ 7) /* P4 */
#define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */
#define X86_FEATURE_UP (3*32+ 9) /* smp kernel running on up */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */

6
include/asm-i386/mutex.h
Просмотреть файл

@ -9,6 +9,8 @@
#ifndef _ASM_MUTEX_H
#define _ASM_MUTEX_H
#include "asm/alternative.h"
/**
* __mutex_fastpath_lock - try to take the lock by moving the count
* from 1 to a 0 value
@ -27,7 +29,7 @@ do { \
typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \
\
__asm__ __volatile__( \
LOCK " decl (%%eax) \n" \
LOCK_PREFIX " decl (%%eax) \n" \
" js 2f \n" \
"1: \n" \
\
@ -83,7 +85,7 @@ do { \
typecheck_fn(fastcall void (*)(atomic_t *), fail_fn); \
\
__asm__ __volatile__( \
LOCK " incl (%%eax) \n" \
LOCK_PREFIX " incl (%%eax) \n" \
" jle 2f \n" \
"1: \n" \
\

28
include/asm-i386/rwlock.h
Просмотреть файл

@ -21,21 +21,23 @@
#define RW_LOCK_BIAS_STR "0x01000000"
#define __build_read_lock_ptr(rw, helper) \
asm volatile(LOCK "subl $1,(%0)\n\t" \
alternative_smp("lock; subl $1,(%0)\n\t" \
"jns 1f\n" \
"call " helper "\n\t" \
"1:\n" \
::"a" (rw) : "memory")
"1:\n", \
"subl $1,(%0)\n\t", \
:"a" (rw) : "memory")
#define __build_read_lock_const(rw, helper) \
asm volatile(LOCK "subl $1,%0\n\t" \
alternative_smp("lock; subl $1,%0\n\t" \
"jns 1f\n" \
"pushl %%eax\n\t" \
"leal %0,%%eax\n\t" \
"call " helper "\n\t" \
"popl %%eax\n\t" \
"1:\n" \
:"=m" (*(volatile int *)rw) : : "memory")
"1:\n", \
"subl $1,%0\n\t", \
"=m" (*(volatile int *)rw) : : "memory")
#define __build_read_lock(rw, helper) do { \
if (__builtin_constant_p(rw)) \
@ -45,21 +47,23 @@
} while (0)
#define __build_write_lock_ptr(rw, helper) \
asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
alternative_smp("lock; subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
"jz 1f\n" \
"call " helper "\n\t" \
"1:\n" \
::"a" (rw) : "memory")
"1:\n", \
"subl $" RW_LOCK_BIAS_STR ",(%0)\n\t", \
:"a" (rw) : "memory")
#define __build_write_lock_const(rw, helper) \
asm volatile(LOCK "subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
alternative_smp("lock; subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
"jz 1f\n" \
"pushl %%eax\n\t" \
"leal %0,%%eax\n\t" \
"call " helper "\n\t" \
"popl %%eax\n\t" \
"1:\n" \
:"=m" (*(volatile int *)rw) : : "memory")
"1:\n", \
"subl $" RW_LOCK_BIAS_STR ",%0\n\t", \
"=m" (*(volatile int *)rw) : : "memory")
#define __build_write_lock(rw, helper) do { \
if (__builtin_constant_p(rw)) \

8
include/asm-i386/semaphore.h
Просмотреть файл

@ -99,7 +99,7 @@ static inline void down(struct semaphore * sem)
might_sleep();
__asm__ __volatile__(
"# atomic down operation\n\t"
LOCK "decl %0\n\t" /* --sem->count */
LOCK_PREFIX "decl %0\n\t" /* --sem->count */
"js 2f\n"
"1:\n"
LOCK_SECTION_START("")
@ -123,7 +123,7 @@ static inline int down_interruptible(struct semaphore * sem)
might_sleep();
__asm__ __volatile__(
"# atomic interruptible down operation\n\t"
LOCK "decl %1\n\t" /* --sem->count */
LOCK_PREFIX "decl %1\n\t" /* --sem->count */
"js 2f\n\t"
"xorl %0,%0\n"
"1:\n"
@ -148,7 +148,7 @@ static inline int down_trylock(struct semaphore * sem)
__asm__ __volatile__(
"# atomic interruptible down operation\n\t"
LOCK "decl %1\n\t" /* --sem->count */
LOCK_PREFIX "decl %1\n\t" /* --sem->count */
"js 2f\n\t"
"xorl %0,%0\n"
"1:\n"
@ -173,7 +173,7 @@ static inline void up(struct semaphore * sem)
{
__asm__ __volatile__(
"# atomic up operation\n\t"
LOCK "incl %0\n\t" /* ++sem->count */
LOCK_PREFIX "incl %0\n\t" /* ++sem->count */
"jle 2f\n"
"1:\n"
LOCK_SECTION_START("")

21
include/asm-i386/spinlock.h
Просмотреть файл

@ -48,18 +48,23 @@
"jmp 1b\n" \
"4:\n\t"
#define __raw_spin_lock_string_up \
"\n\tdecb %0"
static inline void __raw_spin_lock(raw_spinlock_t *lock)
{
__asm__ __volatile__(
__raw_spin_lock_string
:"=m" (lock->slock) : : "memory");
alternative_smp(
__raw_spin_lock_string,
__raw_spin_lock_string_up,
"=m" (lock->slock) : : "memory");
}
static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
{
__asm__ __volatile__(
__raw_spin_lock_string_flags
:"=m" (lock->slock) : "r" (flags) : "memory");
alternative_smp(
__raw_spin_lock_string_flags,
__raw_spin_lock_string_up,
"=m" (lock->slock) : "r" (flags) : "memory");
}
static inline int __raw_spin_trylock(raw_spinlock_t *lock)
@ -178,12 +183,12 @@ static inline int __raw_write_trylock(raw_rwlock_t *lock)
static inline void __raw_read_unlock(raw_rwlock_t *rw)
{
asm volatile("lock ; incl %0" :"=m" (rw->lock) : : "memory");
asm volatile(LOCK_PREFIX "incl %0" :"=m" (rw->lock) : : "memory");
}
static inline void __raw_write_unlock(raw_rwlock_t *rw)
{
asm volatile("lock ; addl $" RW_LOCK_BIAS_STR ", %0"
asm volatile(LOCK_PREFIX "addl $" RW_LOCK_BIAS_STR ", %0"
: "=m" (rw->lock) : : "memory");
}

62
include/asm-i386/system.h
Просмотреть файл

@ -352,67 +352,6 @@ static inline unsigned long long __cmpxchg64(volatile void *ptr, unsigned long l
#endif
#ifdef __KERNEL__
struct alt_instr {
__u8 *instr; /* original instruction */
__u8 *replacement;
__u8 cpuid; /* cpuid bit set for replacement */
__u8 instrlen; /* length of original instruction */
__u8 replacementlen; /* length of new instruction, <= instrlen */
__u8 pad;
};
#endif
/*
* Alternative instructions for different CPU types or capabilities.
*
* This allows to use optimized instructions even on generic binary
* kernels.
*
* length of oldinstr must be longer or equal the length of newinstr
* It can be padded with nops as needed.
*
* For non barrier like inlines please define new variants
* without volatile and memory clobber.
*/
#define alternative(oldinstr, newinstr, feature) \
asm volatile ("661:\n\t" oldinstr "\n662:\n" \
".section .altinstructions,\"a\"\n" \
" .align 4\n" \
" .long 661b\n" /* label */ \
" .long 663f\n" /* new instruction */ \
" .byte %c0\n" /* feature bit */ \
" .byte 662b-661b\n" /* sourcelen */ \
" .byte 664f-663f\n" /* replacementlen */ \
".previous\n" \
".section .altinstr_replacement,\"ax\"\n" \
"663:\n\t" newinstr "\n664:\n" /* replacement */ \
".previous" :: "i" (feature) : "memory")
/*
* Alternative inline assembly with input.
*
* Pecularities:
* No memory clobber here.
* Argument numbers start with 1.
* Best is to use constraints that are fixed size (like (%1) ... "r")
* If you use variable sized constraints like "m" or "g" in the
* replacement maake sure to pad to the worst case length.
*/
#define alternative_input(oldinstr, newinstr, feature, input...) \
asm volatile ("661:\n\t" oldinstr "\n662:\n" \
".section .altinstructions,\"a\"\n" \
" .align 4\n" \
" .long 661b\n" /* label */ \
" .long 663f\n" /* new instruction */ \
" .byte %c0\n" /* feature bit */ \
" .byte 662b-661b\n" /* sourcelen */ \
" .byte 664f-663f\n" /* replacementlen */ \
".previous\n" \
".section .altinstr_replacement,\"ax\"\n" \
"663:\n\t" newinstr "\n664:\n" /* replacement */ \
".previous" :: "i" (feature), ##input)
/*
* Force strict CPU ordering.
* And yes, this is required on UP too when we're talking
@ -558,5 +497,6 @@ static inline void sched_cacheflush(void)
}
extern unsigned long arch_align_stack(unsigned long sp);
extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
#endif

6
include/asm-um/alternative.h Normal file
Просмотреть файл

@ -0,0 +1,6 @@
#ifndef __UM_ALTERNATIVE_H
#define __UM_ALTERNATIVE_H
#include "asm/arch/alternative.h"
#endif