iio: accel: kxsd9: Deploy system and runtime PM
This deploys runtime and system PM in the KXSD9 driver: - Use the force_runtime_suspend/resume callbacks as system PM operations. - Add buffer prepare/unprepare callbacks to grab the runtime PM while we're using buffered reads and put get/put_autosuspend in these. - Insert get/put_autosuspend calls anywhere the IO is used from the raw read/write callbacks. - Move the fullscale setting to be cached in the state container so we can restore it properly when coming back from system/runtime suspend. - Set the autosuspend delay to two orders of magnitude that of the sensor start-up time (20ms) so we will autosuspend after 2s. - Register the callbacks in both the SPI and I2C subdrivers. Tested with the I2C KXSD9 on the Qualcomm APQ8060 Dragonboard. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Родитель
79383aaec4
Коммит
9a9a369d61
|
@ -55,6 +55,7 @@ static struct i2c_driver kxsd9_i2c_driver = {
|
|||
.driver = {
|
||||
.name = "kxsd9",
|
||||
.of_match_table = of_match_ptr(kxsd9_of_match),
|
||||
.pm = &kxsd9_dev_pm_ops,
|
||||
},
|
||||
.probe = kxsd9_i2c_probe,
|
||||
.remove = kxsd9_i2c_remove,
|
||||
|
|
|
@ -43,6 +43,7 @@ MODULE_DEVICE_TABLE(spi, kxsd9_spi_id);
|
|||
static struct spi_driver kxsd9_spi_driver = {
|
||||
.driver = {
|
||||
.name = "kxsd9",
|
||||
.pm = &kxsd9_dev_pm_ops,
|
||||
},
|
||||
.probe = kxsd9_spi_probe,
|
||||
.remove = kxsd9_spi_remove,
|
||||
|
|
|
@ -23,6 +23,7 @@
|
|||
#include <linux/bitops.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
#include <linux/iio/buffer.h>
|
||||
|
@ -68,11 +69,13 @@
|
|||
* @dev: pointer to the parent device
|
||||
* @map: regmap to the device
|
||||
* @regs: regulators for this device, VDD and IOVDD
|
||||
* @scale: the current scaling setting
|
||||
*/
|
||||
struct kxsd9_state {
|
||||
struct device *dev;
|
||||
struct regmap *map;
|
||||
struct regulator_bulk_data regs[2];
|
||||
u8 scale;
|
||||
};
|
||||
|
||||
#define KXSD9_SCALE_2G "0.011978"
|
||||
|
@ -111,6 +114,10 @@ static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro)
|
|||
i);
|
||||
if (ret < 0)
|
||||
goto error_ret;
|
||||
|
||||
/* Cached scale when the sensor is powered down */
|
||||
st->scale = i;
|
||||
|
||||
error_ret:
|
||||
return ret;
|
||||
}
|
||||
|
@ -133,6 +140,9 @@ static int kxsd9_write_raw(struct iio_dev *indio_dev,
|
|||
long mask)
|
||||
{
|
||||
int ret = -EINVAL;
|
||||
struct kxsd9_state *st = iio_priv(indio_dev);
|
||||
|
||||
pm_runtime_get_sync(st->dev);
|
||||
|
||||
if (mask == IIO_CHAN_INFO_SCALE) {
|
||||
/* Check no integer component */
|
||||
|
@ -141,6 +151,9 @@ static int kxsd9_write_raw(struct iio_dev *indio_dev,
|
|||
ret = kxsd9_write_scale(indio_dev, val2);
|
||||
}
|
||||
|
||||
pm_runtime_mark_last_busy(st->dev);
|
||||
pm_runtime_put_autosuspend(st->dev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -154,6 +167,8 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
|
|||
__be16 raw_val;
|
||||
u16 nval;
|
||||
|
||||
pm_runtime_get_sync(st->dev);
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
ret = regmap_bulk_read(st->map, chan->address, &raw_val,
|
||||
|
@ -184,6 +199,9 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
|
|||
}
|
||||
|
||||
error_ret:
|
||||
pm_runtime_mark_last_busy(st->dev);
|
||||
pm_runtime_put_autosuspend(st->dev);
|
||||
|
||||
return ret;
|
||||
};
|
||||
|
||||
|
@ -214,6 +232,32 @@ static irqreturn_t kxsd9_trigger_handler(int irq, void *p)
|
|||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int kxsd9_buffer_preenable(struct iio_dev *indio_dev)
|
||||
{
|
||||
struct kxsd9_state *st = iio_priv(indio_dev);
|
||||
|
||||
pm_runtime_get_sync(st->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kxsd9_buffer_postdisable(struct iio_dev *indio_dev)
|
||||
{
|
||||
struct kxsd9_state *st = iio_priv(indio_dev);
|
||||
|
||||
pm_runtime_mark_last_busy(st->dev);
|
||||
pm_runtime_put_autosuspend(st->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct iio_buffer_setup_ops kxsd9_buffer_setup_ops = {
|
||||
.preenable = kxsd9_buffer_preenable,
|
||||
.postenable = iio_triggered_buffer_postenable,
|
||||
.predisable = iio_triggered_buffer_predisable,
|
||||
.postdisable = kxsd9_buffer_postdisable,
|
||||
};
|
||||
|
||||
#define KXSD9_ACCEL_CHAN(axis, index) \
|
||||
{ \
|
||||
.type = IIO_ACCEL, \
|
||||
|
@ -285,7 +329,7 @@ static int kxsd9_power_up(struct kxsd9_state *st)
|
|||
KXSD9_CTRL_C_LP_1000HZ |
|
||||
KXSD9_CTRL_C_MOT_LEV |
|
||||
KXSD9_CTRL_C_MOT_LAT |
|
||||
KXSD9_CTRL_C_FS_2G);
|
||||
st->scale);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
|
@ -369,13 +413,15 @@ int kxsd9_common_probe(struct device *dev,
|
|||
dev_err(dev, "Cannot get regulators\n");
|
||||
return ret;
|
||||
}
|
||||
/* Default scaling */
|
||||
st->scale = KXSD9_CTRL_C_FS_2G;
|
||||
|
||||
kxsd9_power_up(st);
|
||||
|
||||
ret = iio_triggered_buffer_setup(indio_dev,
|
||||
iio_pollfunc_store_time,
|
||||
kxsd9_trigger_handler,
|
||||
NULL);
|
||||
&kxsd9_buffer_setup_ops);
|
||||
if (ret) {
|
||||
dev_err(dev, "triggered buffer setup failed\n");
|
||||
goto err_power_down;
|
||||
|
@ -387,6 +433,19 @@ int kxsd9_common_probe(struct device *dev,
|
|||
|
||||
dev_set_drvdata(dev, indio_dev);
|
||||
|
||||
/* Enable runtime PM */
|
||||
pm_runtime_get_noresume(dev);
|
||||
pm_runtime_set_active(dev);
|
||||
pm_runtime_enable(dev);
|
||||
/*
|
||||
* Set autosuspend to two orders of magnitude larger than the
|
||||
* start-up time. 20ms start-up time means 2000ms autosuspend,
|
||||
* i.e. 2 seconds.
|
||||
*/
|
||||
pm_runtime_set_autosuspend_delay(dev, 2000);
|
||||
pm_runtime_use_autosuspend(dev);
|
||||
pm_runtime_put(dev);
|
||||
|
||||
return 0;
|
||||
|
||||
err_cleanup_buffer:
|
||||
|
@ -405,12 +464,41 @@ int kxsd9_common_remove(struct device *dev)
|
|||
|
||||
iio_triggered_buffer_cleanup(indio_dev);
|
||||
iio_device_unregister(indio_dev);
|
||||
pm_runtime_get_sync(dev);
|
||||
pm_runtime_put_noidle(dev);
|
||||
pm_runtime_disable(dev);
|
||||
kxsd9_power_down(st);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(kxsd9_common_remove);
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int kxsd9_runtime_suspend(struct device *dev)
|
||||
{
|
||||
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
||||
struct kxsd9_state *st = iio_priv(indio_dev);
|
||||
|
||||
return kxsd9_power_down(st);
|
||||
}
|
||||
|
||||
static int kxsd9_runtime_resume(struct device *dev)
|
||||
{
|
||||
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
||||
struct kxsd9_state *st = iio_priv(indio_dev);
|
||||
|
||||
return kxsd9_power_up(st);
|
||||
}
|
||||
#endif /* CONFIG_PM */
|
||||
|
||||
const struct dev_pm_ops kxsd9_dev_pm_ops = {
|
||||
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
||||
pm_runtime_force_resume)
|
||||
SET_RUNTIME_PM_OPS(kxsd9_runtime_suspend,
|
||||
kxsd9_runtime_resume, NULL)
|
||||
};
|
||||
EXPORT_SYMBOL(kxsd9_dev_pm_ops);
|
||||
|
||||
MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
|
||||
MODULE_DESCRIPTION("Kionix KXSD9 driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
|
@ -8,3 +8,5 @@ int kxsd9_common_probe(struct device *dev,
|
|||
struct regmap *map,
|
||||
const char *name);
|
||||
int kxsd9_common_remove(struct device *dev);
|
||||
|
||||
extern const struct dev_pm_ops kxsd9_dev_pm_ops;
|
||||
|
|
Загрузка…
Ссылка в новой задаче