V4L/DVB (3344c): Pci probing for stradis driver

- Pci probing functions added, some functions were rewritten.

- Use PCI_DEVICE macro.

- dev_ used for printing when pci_dev available.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Jiri Slaby 2006-01-11 19:41:13 -02:00 коммит произвёл Mauro Carvalho Chehab
Родитель d4437d3fad
Коммит 9ae82293ff
2 изменённых файлов: 116 добавлений и 88 удалений

Просмотреть файл

@ -73,7 +73,6 @@ struct saa7146
unsigned int nr;
unsigned long irq; /* IRQ used by SAA7146 card */
unsigned short id;
struct pci_dev *dev;
unsigned char revision;
unsigned char boardcfg[64]; /* 64 bytes of config from eeprom */
unsigned long saa7146_adr; /* bus address of IO mem from PCI BIOS */

Просмотреть файл

@ -1991,12 +1991,10 @@ static struct video_device saa_template =
.minor = -1,
};
static int configure_saa7146(struct pci_dev *dev, int num)
static int __devinit configure_saa7146(struct pci_dev *pdev, int num)
{
int result;
struct saa7146 *saa;
saa = &saa7146s[num];
struct saa7146 *saa = &saa7146s[num];
saa->endmarkhead = saa->endmarktail = 0;
saa->win.x = saa->win.y = 0;
@ -2013,7 +2011,6 @@ static int configure_saa7146(struct pci_dev *dev, int num)
saa->picture.contrast = 38768;
saa->picture.colour = 32768;
saa->cap = 0;
saa->dev = dev;
saa->nr = num;
saa->playmode = VID_PLAY_NORMAL;
memset(saa->boardcfg, 0, 64); /* clear board config area */
@ -2033,14 +2030,14 @@ static int configure_saa7146(struct pci_dev *dev, int num)
init_waitqueue_head(&saa->vidq);
spin_lock_init(&saa->lock);
if (pci_enable_device(dev))
if (pci_enable_device(pdev))
return -EIO;
saa->id = dev->device;
saa->irq = dev->irq;
saa->id = pdev->device;
saa->irq = pdev->irq;
saa->video_dev.minor = -1;
saa->saa7146_adr = pci_resource_start(dev, 0);
pci_read_config_byte(dev, PCI_CLASS_REVISION, &saa->revision);
saa->saa7146_adr = pci_resource_start(pdev, 0);
pci_read_config_byte(pdev, PCI_CLASS_REVISION, &saa->revision);
saa->saa7146_mem = ioremap(saa->saa7146_adr, 0x200);
if (!saa->saa7146_mem)
@ -2051,16 +2048,15 @@ static int configure_saa7146(struct pci_dev *dev, int num)
result = request_irq(saa->irq, saa7146_irq,
SA_SHIRQ | SA_INTERRUPT, "stradis", (void *) saa);
if (result == -EINVAL)
printk(KERN_ERR "stradis%d: Bad irq number or handler\n",
num);
dev_err(&pdev->dev, "%d: Bad irq number or handler\n", num);
if (result == -EBUSY)
printk(KERN_ERR "stradis%d: IRQ %ld busy, change your PnP"
" config in BIOS\n", num, saa->irq);
dev_err(&pdev->dev, "%d: IRQ %ld busy, change your PnP config "
"in BIOS\n", num, saa->irq);
if (result < 0) {
iounmap(saa->saa7146_mem);
return result;
}
pci_set_master(dev);
pci_set_master(pdev);
if (video_register_device(&saa->video_dev, VFL_TYPE_GRABBER, video_nr) < 0) {
iounmap(saa->saa7146_mem);
return -1;
@ -2068,10 +2064,11 @@ static int configure_saa7146(struct pci_dev *dev, int num)
return 0;
}
static int init_saa7146(int i)
static int __devinit init_saa7146(int i, struct device *dev)
{
struct saa7146 *saa = &saa7146s[i];
memset(saa, 0, sizeof(*saa));
saa->user = 0;
/* reset the saa7146 */
saawrite(0xffff0000, SAA7146_MC1);
@ -2104,7 +2101,7 @@ static int init_saa7146(int i)
/* allocate 32k dma buffer + 4k for page table */
if ((saa->dmadebi = kmalloc(32768 + 4096, GFP_KERNEL)) == NULL) {
printk(KERN_ERR "stradis%d: debi kmalloc failed\n", i);
dev_err(dev, "%d: debi kmalloc failed\n", i);
return -1;
}
#if 0
@ -2117,19 +2114,19 @@ static int init_saa7146(int i)
saa->audtail = saa->vidtail = saa->osdtail = 0;
if (saa->vidbuf == NULL)
if ((saa->vidbuf = vmalloc(524288)) == NULL) {
printk(KERN_ERR "stradis%d: malloc failed\n", saa->nr);
dev_err(dev, "%d: malloc failed\n", saa->nr);
return -ENOMEM;
}
if (saa->audbuf == NULL)
if ((saa->audbuf = vmalloc(65536)) == NULL) {
printk(KERN_ERR "stradis%d: malloc failed\n", saa->nr);
dev_err(dev, "%d: malloc failed\n", saa->nr);
vfree(saa->vidbuf);
saa->vidbuf = NULL;
return -ENOMEM;
}
if (saa->osdbuf == NULL)
if ((saa->osdbuf = vmalloc(131072)) == NULL) {
printk(KERN_ERR "stradis%d: malloc failed\n", saa->nr);
dev_err(dev, "%d: malloc failed\n", saa->nr);
vfree(saa->vidbuf);
vfree(saa->audbuf);
saa->vidbuf = saa->audbuf = NULL;
@ -2137,7 +2134,7 @@ static int init_saa7146(int i)
}
/* allocate 81920 byte buffer for clipping */
if ((saa->dmavid2 = kmalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) {
printk(KERN_ERR "stradis%d: clip kmalloc failed\n", saa->nr);
dev_err(dev, "%d: clip kmalloc failed\n", saa->nr);
vfree(saa->vidbuf);
vfree(saa->audbuf);
vfree(saa->osdbuf);
@ -2159,89 +2156,121 @@ static int init_saa7146(int i)
return 0;
}
static void release_saa(void)
static void stradis_release_saa(struct pci_dev *pdev)
{
u8 command;
int i;
struct saa7146 *saa;
int i = (int)pci_get_drvdata(pdev);
struct saa7146 *saa = &saa7146s[i];
for (i = 0; i < saa_num; i++) {
saa = &saa7146s[i];
/* turn off all capturing, DMA and IRQs */
saawrite(0xffff0000, SAA7146_MC1); /* reset chip */
saawrite(0, SAA7146_MC2);
saawrite(0, SAA7146_IER);
saawrite(0xffffffffUL, SAA7146_ISR);
/* turn off all capturing, DMA and IRQs */
saawrite(0xffff0000, SAA7146_MC1); /* reset chip */
saawrite(0, SAA7146_MC2);
saawrite(0, SAA7146_IER);
saawrite(0xffffffffUL, SAA7146_ISR);
/* disable PCI bus-mastering */
pci_read_config_byte(pdev, PCI_COMMAND, &command);
command &= ~PCI_COMMAND_MASTER;
pci_write_config_byte(pdev, PCI_COMMAND, command);
/* disable PCI bus-mastering */
pci_read_config_byte(saa->dev, PCI_COMMAND, &command);
command &= ~PCI_COMMAND_MASTER;
pci_write_config_byte(saa->dev, PCI_COMMAND, command);
/* unmap and free memory */
saa->audhead = saa->audtail = saa->osdhead = 0;
saa->vidhead = saa->vidtail = saa->osdtail = 0;
vfree(saa->vidbuf);
vfree(saa->audbuf);
vfree(saa->osdbuf);
kfree(saa->dmavid2);
saa->audbuf = saa->vidbuf = saa->osdbuf = NULL;
saa->dmavid2 = NULL;
kfree(saa->dmadebi);
kfree(saa->dmavid1);
kfree(saa->dmavid3);
kfree(saa->dmaa1in);
kfree(saa->dmaa1out);
kfree(saa->dmaa2in);
kfree(saa->dmaa2out);
kfree(saa->dmaRPS1);
kfree(saa->dmaRPS2);
free_irq(saa->irq, saa);
if (saa->saa7146_mem)
iounmap(saa->saa7146_mem);
if (saa->video_dev.minor != -1)
video_unregister_device(&saa->video_dev);
}
/* unmap and free memory */
saa->audhead = saa->audtail = saa->osdhead = 0;
saa->vidhead = saa->vidtail = saa->osdtail = 0;
vfree(saa->vidbuf);
vfree(saa->audbuf);
vfree(saa->osdbuf);
kfree(saa->dmavid2);
saa->audbuf = saa->vidbuf = saa->osdbuf = NULL;
saa->dmavid2 = NULL;
kfree(saa->dmadebi);
kfree(saa->dmavid1);
kfree(saa->dmavid3);
kfree(saa->dmaa1in);
kfree(saa->dmaa1out);
kfree(saa->dmaa2in);
kfree(saa->dmaa2out);
kfree(saa->dmaRPS1);
kfree(saa->dmaRPS2);
free_irq(saa->irq, saa);
if (saa->saa7146_mem)
iounmap(saa->saa7146_mem);
if (saa->video_dev.minor != -1)
video_unregister_device(&saa->video_dev);
}
static int __init stradis_init (void)
static int __devinit stradis_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct pci_dev *dev = NULL;
int result = 0, i;
int retval = -EINVAL;
if (saa_num >= SAA7146_MAX)
goto err;
if (!pdev->subsystem_vendor)
dev_info(&pdev->dev, "%d: rev1 decoder\n", saa_num);
else
dev_info(&pdev->dev, "%d: SDM2xx found\n", saa_num);
pci_set_drvdata(pdev, (void *)saa_num);
retval = configure_saa7146(pdev, saa_num);
if (retval) {
dev_err(&pdev->dev, "%d: error in configuring\n", saa_num);
goto err;
}
if (init_saa7146(saa_num, &pdev->dev) < 0) {
dev_err(&pdev->dev, "%d: error in initialization\n", saa_num);
retval = -EIO;
goto errrel;
}
saa_num++;
return 0;
errrel:
stradis_release_saa(pdev);
err:
return retval;
}
static void __devexit stradis_remove(struct pci_dev *pdev)
{
stradis_release_saa(pdev);
}
static struct pci_device_id stradis_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, stradis_pci_tbl);
static struct pci_driver stradis_driver = {
.name = "stradis",
.id_table = stradis_pci_tbl,
.probe = stradis_probe,
.remove = __devexit_p(stradis_remove)
};
int __init stradis_init(void)
{
int retval;
saa_num = 0;
while ((dev = pci_find_device(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146, dev))) {
if (!dev->subsystem_vendor)
printk(KERN_INFO "stradis%d: rev1 decoder\n", saa_num);
else
printk(KERN_INFO "stradis%d: SDM2xx found\n", saa_num);
result = configure_saa7146(dev, saa_num++);
if (result)
return result;
}
if (saa_num)
printk(KERN_INFO "stradis: %d card(s) found.\n", saa_num);
else
return -EINVAL;
for (i = 0; i < saa_num; i++)
if (init_saa7146(i) < 0) {
release_saa();
return -EIO;
}
return 0;
retval = pci_register_driver(&stradis_driver);
if (retval)
printk(KERN_ERR "stradis: Unable to register pci driver.\n");
return retval;
}
static void __exit stradis_exit (void)
void __exit stradis_exit(void)
{
release_saa();
pci_unregister_driver(&stradis_driver);
printk(KERN_INFO "stradis: module cleanup complete\n");
}
module_init(stradis_init);
module_exit(stradis_exit);