scsi: mpt3sas: Handle fault during HBA initialization

During HBA initialization time, if handshake operation fails due to some
firmware fault then currently driver is terminating the HBA
initialization. It is possible that HBA may come up properly if diag reset
is issued.

So improvement is made in driver in such a way that before terminating the
HBA initialization, driver checks the IOC state and if IOC state is in
fault state then issue diag reset for once. If diag reset is successful
then continue with HBA initialization else terminate the HBA
initialization.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/mpt3sas/mpt3sas_base.c

@@ -3181,6 +3181,37 @@ mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
 	}
 }
 
+static int
+_base_diag_reset(struct MPT3SAS_ADAPTER *ioc);
+
+/**
+ * _base_check_for_fault_and_issue_reset - check if IOC is in fault state
+ *     and if it is in fault state then issue diag reset.
+ * @ioc: per adapter object
+ *
+ * Returns: 0 for success, non-zero for failure.
+ */
+static int
+_base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc)
+{
+	u32 ioc_state;
+	int rc = -EFAULT;
+
+	dinitprintk(ioc, pr_info("%s\n", __func__));
+	if (ioc->pci_error_recovery)
+		return 0;
+	ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
+	dhsprintk(ioc, pr_info("%s: ioc_state(0x%08x)\n", __func__, ioc_state));
+
+	if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+		mpt3sas_base_fault_info(ioc, ioc_state &
+		    MPI2_DOORBELL_DATA_MASK);
+		rc = _base_diag_reset(ioc);
+	}
+
+	return rc;
+}
+
 /**
  * mpt3sas_base_map_resources - map in controller resources (io/irq/memap)
  * @ioc: per adapter object
@@ -3193,7 +3224,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 	struct pci_dev *pdev = ioc->pdev;
 	u32 memap_sz;
 	u32 pio_sz;
-	int i, r = 0;
+	int i, r = 0, rc;
 	u64 pio_chip = 0;
 	phys_addr_t chip_phys = 0;
 	struct adapter_reply_queue *reply_q;
@@ -3254,8 +3285,11 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
 	_base_mask_interrupts(ioc);
 
 	r = _base_get_ioc_facts(ioc);
-	if (r)
+	if (r) {
-		goto out_fail;
+		rc = _base_check_for_fault_and_issue_reset(ioc);
+		if (rc || (_base_get_ioc_facts(ioc)))
+			goto out_fail;
+	}
 
 	if (!ioc->rdpq_array_enable_assigned) {
 		ioc->rdpq_array_enable = ioc->rdpq_array_capable;
@@ -5414,8 +5448,6 @@ _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout)
  *
  * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
  */
-static int
-_base_diag_reset(struct MPT3SAS_ADAPTER *ioc);
 
 static int
 _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
@@ -6691,7 +6723,7 @@ _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type)
 static int
 _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
 {
-	int r, i, index;
+	int r, i, index, rc;
 	unsigned long	flags;
 	u32 reply_address;
 	u16 smid;
@@ -6794,8 +6826,19 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc)
  skip_init_reply_post_free_queue:
 
 	r = _base_send_ioc_init(ioc);
-	if (r)
+	if (r) {
-		return r;
+		/*
+		 * No need to check IOC state for fault state & issue
+		 * diag reset during host reset. This check is need
+		 * only during driver load time.
+		 */
+		if (!ioc->is_driver_loading)
+			return r;
+
+		rc = _base_check_for_fault_and_issue_reset(ioc);
+		if (rc || (_base_send_ioc_init(ioc)))
+			return r;
+	}
 
 	/* initialize reply free host index */
 	ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
@@ -6887,7 +6930,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
 int
 mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 {
-	int r, i;
+	int r, i, rc;
 	int cpu_id, last_cpu_id = 0;
 
 	dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
@@ -6931,8 +6974,11 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 
 	pci_set_drvdata(ioc->pdev, ioc->shost);
 	r = _base_get_ioc_facts(ioc);
-	if (r)
+	if (r) {
-		goto out_free_resources;
+		rc = _base_check_for_fault_and_issue_reset(ioc);
+		if (rc || (_base_get_ioc_facts(ioc)))
+			goto out_free_resources;
+	}
 
 	switch (ioc->hba_mpi_version_belonged) {
 	case MPI2_VERSION:
@@ -7000,8 +7046,11 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 
 	for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
 		r = _base_get_port_facts(ioc, i);
-		if (r)
+		if (r) {
-			goto out_free_resources;
+			rc = _base_check_for_fault_and_issue_reset(ioc);
+			if (rc || (_base_get_port_facts(ioc, i)))
+				goto out_free_resources;
+		}
 	}
 
 	r = _base_allocate_memory_pools(ioc);