ARM: PL08x: prefix hex numbers with 0x

A driver which emits both decimal and hex numbers in its printk
creates confusion as to what is what.  Prefix hex numbers with 0x.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This commit is contained in:
Russell King - ARM Linux 2011-01-03 22:33:47 +00:00 коммит произвёл Dan Williams
Родитель b05cd8f4c0
Коммит 9c13299268
1 изменённых файлов: 9 добавлений и 9 удалений

Просмотреть файл

@ -199,8 +199,8 @@ static void pl08x_set_cregs(struct pl08x_driver_data *pl08x,
;
dev_vdbg(&pl08x->adev->dev,
"WRITE channel %d: csrc=%08x, cdst=%08x, "
"cctl=%08x, clli=%08x, ccfg=%08x\n",
"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
"cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n",
ch->id,
ch->csrc,
ch->cdst,
@ -731,7 +731,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
while (remainder) {
dev_vdbg(&pl08x->adev->dev,
"%s single byte LLIs for a transfer of "
"less than a bus width (remain %08x)\n",
"less than a bus width (remain 0x%08x)\n",
__func__, remainder);
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
num_llis =
@ -747,7 +747,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
while ((mbus->addr) % (mbus->buswidth)) {
dev_vdbg(&pl08x->adev->dev,
"%s adjustment lli for less than bus width "
"(remain %08x)\n",
"(remain 0x%08x)\n",
__func__, remainder);
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
num_llis = pl08x_fill_lli_for_desc
@ -865,7 +865,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
if (target_len != lli_len) {
dev_vdbg(&pl08x->adev->dev,
"%s can't send what we want. Desired %08x, lli of %08x bytes in txd of %08x\n",
"%s can't send what we want. Desired 0x%08x, lli of 0x%08x bytes in txd of 0x%08x\n",
__func__, target_len, lli_len, txd->len);
}
@ -875,7 +875,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
tsize);
dev_vdbg(&pl08x->adev->dev,
"%s fill lli with single lli chunk of size %08x (remainder %08x)\n",
"%s fill lli with single lli chunk of size 0x%08x (remainder 0x%08x)\n",
__func__, lli_len, remainder);
num_llis = pl08x_fill_lli_for_desc(pl08x, txd,
num_llis, lli_len, cctl,
@ -894,7 +894,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
&& (remainder); j++) {
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
dev_vdbg(&pl08x->adev->dev,
"%s align with boundary, single byte (remain %08x)\n",
"%s align with boundary, single byte (remain 0x%08x)\n",
__func__, remainder);
num_llis =
pl08x_fill_lli_for_desc(pl08x,
@ -979,7 +979,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
for (i = 0; i < num_llis; i++) {
dev_vdbg(&pl08x->adev->dev,
"lli %d @%p: csrc=%08x, cdst=%08x, cctl=%08x, clli=%08x\n",
"lli %d @%p: csrc=0x%08x, cdst=0x%08x, cctl=0x%08x, clli=0x%08x\n",
i,
&llis_va[i],
llis_va[i].src,
@ -1289,7 +1289,7 @@ static void dma_set_runtime_config(struct dma_chan *chan,
dev_dbg(&pl08x->adev->dev,
"configured channel %s (%s) for %s, data width %d, "
"maxburst %d words, LE, CCTL=%08x, CCFG=%08x\n",
"maxburst %d words, LE, CCTL=0x%08x, CCFG=0x%08x\n",
dma_chan_name(chan), plchan->name,
(config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
addr_width,