cxgb4: Add PTP Hardware Clock (PHC) support

Add PTP IEEE-1588 support and make it accessible via PHC subsystem.
The functionality is enabled for T5/T6 adapters. Driver interfaces with
Firmware to program and adjust the clock offset.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Atul Gupta 2017-07-04 16:46:21 +05:30 коммит произвёл David S. Miller
Родитель a456950445
Коммит 9c33e4208b
2 изменённых файлов: 287 добавлений и 0 удалений

Просмотреть файл

@ -5202,6 +5202,9 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
mutex_unlock(&uld_mutex);
}
if (!is_t4(adapter->params.chip))
cxgb4_ptp_init(adapter);
print_adapter_info(adapter);
setup_fw_sge_queues(adapter);
return 0;
@ -5311,6 +5314,9 @@ static void remove_one(struct pci_dev *pdev)
debugfs_remove_recursive(adapter->debugfs_root);
if (!is_t4(adapter->params.chip))
cxgb4_ptp_stop(adapter);
/* If we allocated filters, free up state associated with any
* valid filters ...
*/

Просмотреть файл

@ -192,3 +192,284 @@ int cxgb4_ptp_redirect_rx_packet(struct adapter *adapter, struct port_info *pi)
"PTP: %s error %d\n", __func__, -err);
return err;
}
/**
* @ptp: ptp clock structure
* @ppb: Desired frequency change in parts per billion
*
* Adjust the frequency of the PHC cycle counter by the indicated ppb from
* the base frequency.
*/
static int cxgb4_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
{
struct adapter *adapter = (struct adapter *)container_of(ptp,
struct adapter, ptp_clock_info);
struct fw_ptp_cmd c;
int err;
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_WRITE_F |
FW_PTP_CMD_PORTID_V(0));
c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
c.u.ts.sc = FW_PTP_SC_ADJ_FREQ;
c.u.ts.sign = (ppb < 0) ? 1 : 0;
if (ppb < 0)
ppb = -ppb;
c.u.ts.ppb = cpu_to_be32(ppb);
err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
if (err < 0)
dev_err(adapter->pdev_dev,
"PTP: %s error %d\n", __func__, -err);
return err;
}
/**
* cxgb4_ptp_fineadjtime - Shift the time of the hardware clock
* @ptp: ptp clock structure
* @delta: Desired change in nanoseconds
*
* Adjust the timer by resetting the timecounter structure.
*/
static int cxgb4_ptp_fineadjtime(struct adapter *adapter, s64 delta)
{
struct fw_ptp_cmd c;
int err;
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_WRITE_F |
FW_PTP_CMD_PORTID_V(0));
c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
c.u.ts.sc = FW_PTP_SC_ADJ_FTIME;
c.u.ts.tm = cpu_to_be64(delta);
err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
if (err < 0)
dev_err(adapter->pdev_dev,
"PTP: %s error %d\n", __func__, -err);
return err;
}
/**
* cxgb4_ptp_adjtime - Shift the time of the hardware clock
* @ptp: ptp clock structure
* @delta: Desired change in nanoseconds
*
* Adjust the timer by resetting the timecounter structure.
*/
static int cxgb4_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
{
struct adapter *adapter =
(struct adapter *)container_of(ptp, struct adapter,
ptp_clock_info);
struct fw_ptp_cmd c;
s64 sign = 1;
int err;
if (delta < 0)
sign = -1;
if (delta * sign > PTP_CLOCK_MAX_ADJTIME) {
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_WRITE_F |
FW_PTP_CMD_PORTID_V(0));
c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
c.u.ts.sc = FW_PTP_SC_ADJ_TIME;
c.u.ts.sign = (delta < 0) ? 1 : 0;
if (delta < 0)
delta = -delta;
c.u.ts.tm = cpu_to_be64(delta);
err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
if (err < 0)
dev_err(adapter->pdev_dev,
"PTP: %s error %d\n", __func__, -err);
} else {
err = cxgb4_ptp_fineadjtime(adapter, delta);
}
return err;
}
/**
* cxgb4_ptp_gettime - Reads the current time from the hardware clock
* @ptp: ptp clock structure
* @ts: timespec structure to hold the current time value
*
* Read the timecounter and return the correct value in ns after converting
* it into a struct timespec.
*/
static int cxgb4_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
{
struct adapter *adapter = (struct adapter *)container_of(ptp,
struct adapter, ptp_clock_info);
struct fw_ptp_cmd c;
u64 ns;
int err;
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_READ_F |
FW_PTP_CMD_PORTID_V(0));
c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
c.u.ts.sc = FW_PTP_SC_GET_TIME;
err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), &c);
if (err < 0) {
dev_err(adapter->pdev_dev,
"PTP: %s error %d\n", __func__, -err);
return err;
}
/* convert to timespec*/
ns = be64_to_cpu(c.u.ts.tm);
*ts = ns_to_timespec64(ns);
return err;
}
/**
* cxgb4_ptp_settime - Set the current time on the hardware clock
* @ptp: ptp clock structure
* @ts: timespec containing the new time for the cycle counter
*
* Reset value to new base value instead of the kernel
* wall timer value.
*/
static int cxgb4_ptp_settime(struct ptp_clock_info *ptp,
const struct timespec64 *ts)
{
struct adapter *adapter = (struct adapter *)container_of(ptp,
struct adapter, ptp_clock_info);
struct fw_ptp_cmd c;
u64 ns;
int err;
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_WRITE_F |
FW_PTP_CMD_PORTID_V(0));
c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
c.u.ts.sc = FW_PTP_SC_SET_TIME;
ns = timespec64_to_ns(ts);
c.u.ts.tm = cpu_to_be64(ns);
err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
if (err < 0)
dev_err(adapter->pdev_dev,
"PTP: %s error %d\n", __func__, -err);
return err;
}
static void cxgb4_init_ptp_timer(struct adapter *adapter)
{
struct fw_ptp_cmd c;
int err;
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PTP_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_WRITE_F |
FW_PTP_CMD_PORTID_V(0));
c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
c.u.scmd.sc = FW_PTP_SC_INIT_TIMER;
err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
if (err < 0)
dev_err(adapter->pdev_dev,
"PTP: %s error %d\n", __func__, -err);
}
/**
* cxgb4_ptp_enable - enable or disable an ancillary feature
* @ptp: ptp clock structure
* @request: Desired resource to enable or disable
* @on: Caller passes one to enable or zero to disable
*
* Enable (or disable) ancillary features of the PHC subsystem.
* Currently, no ancillary features are supported.
*/
static int cxgb4_ptp_enable(struct ptp_clock_info __always_unused *ptp,
struct ptp_clock_request __always_unused *request,
int __always_unused on)
{
return -ENOTSUPP;
}
static const struct ptp_clock_info cxgb4_ptp_clock_info = {
.owner = THIS_MODULE,
.name = "cxgb4_clock",
.max_adj = MAX_PTP_FREQ_ADJ,
.n_alarm = 0,
.n_ext_ts = 0,
.n_per_out = 0,
.pps = 0,
.adjfreq = cxgb4_ptp_adjfreq,
.adjtime = cxgb4_ptp_adjtime,
.gettime64 = cxgb4_ptp_gettime,
.settime64 = cxgb4_ptp_settime,
.enable = cxgb4_ptp_enable,
};
/**
* cxgb4_ptp_init - initialize PTP for devices which support it
* @adapter: board private structure
*
* This function performs the required steps for enabling PTP support.
*/
void cxgb4_ptp_init(struct adapter *adapter)
{
struct timespec64 now;
/* no need to create a clock device if we already have one */
if (!IS_ERR_OR_NULL(adapter->ptp_clock))
return;
adapter->ptp_tx_skb = NULL;
adapter->ptp_clock_info = cxgb4_ptp_clock_info;
spin_lock_init(&adapter->ptp_lock);
adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info,
&adapter->pdev->dev);
if (!adapter->ptp_clock) {
dev_err(adapter->pdev_dev,
"PTP %s Clock registration has failed\n", __func__);
return;
}
now = ktime_to_timespec64(ktime_get_real());
cxgb4_init_ptp_timer(adapter);
if (cxgb4_ptp_settime(&adapter->ptp_clock_info, &now) < 0) {
ptp_clock_unregister(adapter->ptp_clock);
adapter->ptp_clock = NULL;
}
}
/**
* cxgb4_ptp_remove - disable PTP device and stop the overflow check
* @adapter: board private structure
*
* Stop the PTP support.
*/
void cxgb4_ptp_stop(struct adapter *adapter)
{
if (adapter->ptp_tx_skb) {
dev_kfree_skb_any(adapter->ptp_tx_skb);
adapter->ptp_tx_skb = NULL;
}
if (adapter->ptp_clock) {
ptp_clock_unregister(adapter->ptp_clock);
adapter->ptp_clock = NULL;
}
}