[media] si4713: coding style whitespace cleanups
Fix most whitespace-related checkpatch errors/warnings. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This commit is contained in:
Hans Verkuil
Mauro Carvalho Chehab
Родитель
b2c6eedb1f
Коммит
9ca33ccd53
|
|
@ -50,12 +50,12 @@ MODULE_VERSION("0.0.1");
|
|||
#define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003
|
||||
#define DEFAULT_LIMITER_RTIME 0x1392
|
||||
#define DEFAULT_LIMITER_DEV 0x102CA
|
||||
#define DEFAULT_PILOT_FREQUENCY 0x4A38
|
||||
#define DEFAULT_PILOT_FREQUENCY 0x4A38
|
||||
#define DEFAULT_PILOT_DEVIATION 0x1A5E
|
||||
#define DEFAULT_ACOMP_ATIME 0x0000
|
||||
#define DEFAULT_ACOMP_RTIME 0xF4240L
|
||||
#define DEFAULT_ACOMP_GAIN 0x0F
|
||||
#define DEFAULT_ACOMP_THRESHOLD (-0x28)
|
||||
#define DEFAULT_ACOMP_THRESHOLD (-0x28)
|
||||
#define DEFAULT_MUTE 0x01
|
||||
#define DEFAULT_POWER_LEVEL 88
|
||||
#define DEFAULT_FREQUENCY 8800
|
||||
|
|
@ -269,9 +269,9 @@ static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv)
|
|||
int err;
|
||||
u8 val[SI4713_GET_PROP_NRESP];
|
||||
/*
|
||||
* .First byte = 0
|
||||
* .Second byte = property's MSB
|
||||
* .Third byte = property's LSB
|
||||
* .First byte = 0
|
||||
* .Second byte = property's MSB
|
||||
* .Third byte = property's LSB
|
||||
*/
|
||||
const u8 args[SI4713_GET_PROP_NARGS] = {
|
||||
0x00,
|
||||
|
|
@ -306,11 +306,11 @@ static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val)
|
|||
int rval;
|
||||
u8 resp[SI4713_SET_PROP_NRESP];
|
||||
/*
|
||||
* .First byte = 0
|
||||
* .Second byte = property's MSB
|
||||
* .Third byte = property's LSB
|
||||
* .Fourth byte = value's MSB
|
||||
* .Fifth byte = value's LSB
|
||||
* .First byte = 0
|
||||
* .Second byte = property's MSB
|
||||
* .Third byte = property's LSB
|
||||
* .Fourth byte = value's MSB
|
||||
* .Fifth byte = value's LSB
|
||||
*/
|
||||
const u8 args[SI4713_SET_PROP_NARGS] = {
|
||||
0x00,
|
||||
|
|
@ -352,8 +352,8 @@ static int si4713_powerup(struct si4713_device *sdev)
|
|||
int err;
|
||||
u8 resp[SI4713_PWUP_NRESP];
|
||||
/*
|
||||
* .First byte = Enabled interrupts and boot function
|
||||
* .Second byte = Input operation mode
|
||||
* .First byte = Enabled interrupts and boot function
|
||||
* .Second byte = Input operation mode
|
||||
*/
|
||||
u8 args[SI4713_PWUP_NARGS] = {
|
||||
SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
|
||||
|
|
@ -515,8 +515,8 @@ static int si4713_wait_stc(struct si4713_device *sdev, const int usecs)
|
|||
|
||||
/*
|
||||
* si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
|
||||
* frequency between 76 and 108 MHz in 10 kHz units and
|
||||
* steps of 50 kHz.
|
||||
* frequency between 76 and 108 MHz in 10 kHz units and
|
||||
* steps of 50 kHz.
|
||||
* @sdev: si4713_device structure for the device we are communicating
|
||||
* @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
|
||||
*/
|
||||
|
|
@ -525,9 +525,9 @@ static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
|
|||
int err;
|
||||
u8 val[SI4713_TXFREQ_NRESP];
|
||||
/*
|
||||
* .First byte = 0
|
||||
* .Second byte = frequency's MSB
|
||||
* .Third byte = frequency's LSB
|
||||
* .First byte = 0
|
||||
* .Second byte = frequency's MSB
|
||||
* .Third byte = frequency's LSB
|
||||
*/
|
||||
const u8 args[SI4713_TXFREQ_NARGS] = {
|
||||
0x00,
|
||||
|
|
@ -555,11 +555,11 @@ static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
|
|||
|
||||
/*
|
||||
* si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in
|
||||
* 1 dB units. A value of 0x00 indicates off. The command
|
||||
* also sets the antenna tuning capacitance. A value of 0
|
||||
* indicates autotuning, and a value of 1 - 191 indicates
|
||||
* a manual override, which results in a tuning
|
||||
* capacitance of 0.25 pF x @antcap.
|
||||
* 1 dB units. A value of 0x00 indicates off. The command
|
||||
* also sets the antenna tuning capacitance. A value of 0
|
||||
* indicates autotuning, and a value of 1 - 191 indicates
|
||||
* a manual override, which results in a tuning
|
||||
* capacitance of 0.25 pF x @antcap.
|
||||
* @sdev: si4713_device structure for the device we are communicating
|
||||
* @power: tuning power (88 - 120 dBuV, unit/step 1 dB)
|
||||
* @antcap: value of antenna tuning capacitor (0 - 191)
|
||||
|
|
@ -570,10 +570,10 @@ static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
|
|||
int err;
|
||||
u8 val[SI4713_TXPWR_NRESP];
|
||||
/*
|
||||
* .First byte = 0
|
||||
* .Second byte = 0
|
||||
* .Third byte = power
|
||||
* .Fourth byte = antcap
|
||||
* .First byte = 0
|
||||
* .Second byte = 0
|
||||
* .Third byte = power
|
||||
* .Fourth byte = antcap
|
||||
*/
|
||||
u8 args[SI4713_TXPWR_NARGS] = {
|
||||
0x00,
|
||||
|
|
@ -602,12 +602,12 @@ static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
|
|||
|
||||
/*
|
||||
* si4713_tx_tune_measure - Enters receive mode and measures the received noise
|
||||
* level in units of dBuV on the selected frequency.
|
||||
* The Frequency must be between 76 and 108 MHz in 10 kHz
|
||||
* units and steps of 50 kHz. The command also sets the
|
||||
* antenna tuning capacitance. A value of 0 means
|
||||
* autotuning, and a value of 1 to 191 indicates manual
|
||||
* override.
|
||||
* level in units of dBuV on the selected frequency.
|
||||
* The Frequency must be between 76 and 108 MHz in 10 kHz
|
||||
* units and steps of 50 kHz. The command also sets the
|
||||
* antenna tuning capacitance. A value of 0 means
|
||||
* autotuning, and a value of 1 to 191 indicates manual
|
||||
* override.
|
||||
* @sdev: si4713_device structure for the device we are communicating
|
||||
* @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
|
||||
* @antcap: value of antenna tuning capacitor (0 - 191)
|
||||
|
|
@ -618,10 +618,10 @@ static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
|
|||
int err;
|
||||
u8 val[SI4713_TXMEA_NRESP];
|
||||
/*
|
||||
* .First byte = 0
|
||||
* .Second byte = frequency's MSB
|
||||
* .Third byte = frequency's LSB
|
||||
* .Fourth byte = antcap
|
||||
* .First byte = 0
|
||||
* .Second byte = frequency's MSB
|
||||
* .Third byte = frequency's LSB
|
||||
* .Fourth byte = antcap
|
||||
*/
|
||||
const u8 args[SI4713_TXMEA_NARGS] = {
|
||||
0x00,
|
||||
|
|
@ -651,11 +651,11 @@ static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
|
|||
|
||||
/*
|
||||
* si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
|
||||
* tx_tune_power commands. This command return the current
|
||||
* frequency, output voltage in dBuV, the antenna tunning
|
||||
* capacitance value and the received noise level. The
|
||||
* command also clears the stcint interrupt bit when the
|
||||
* first bit of its arguments is high.
|
||||
* tx_tune_power commands. This command return the current
|
||||
* frequency, output voltage in dBuV, the antenna tunning
|
||||
* capacitance value and the received noise level. The
|
||||
* command also clears the stcint interrupt bit when the
|
||||
* first bit of its arguments is high.
|
||||
* @sdev: si4713_device structure for the device we are communicating
|
||||
* @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
|
||||
* @frequency: returned frequency
|
||||
|
|
@ -670,7 +670,7 @@ static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
|
|||
int err;
|
||||
u8 val[SI4713_TXSTATUS_NRESP];
|
||||
/*
|
||||
* .First byte = intack bit
|
||||
* .First byte = intack bit
|
||||
*/
|
||||
const u8 args[SI4713_TXSTATUS_NARGS] = {
|
||||
intack & SI4713_INTACK_MASK,
|
||||
|
|
@ -1364,7 +1364,7 @@ static int si4713_probe(struct i2c_client *client,
|
|||
struct v4l2_ctrl_handler *hdl;
|
||||
int rval, i;
|
||||
|
||||
sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
|
||||
sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
|
||||
if (!sdev) {
|
||||
dev_err(&client->dev, "Failed to alloc video device.\n");
|
||||
rval = -ENOMEM;
|
||||
|
|
@ -1440,8 +1440,8 @@ static int si4713_probe(struct i2c_client *client,
|
|||
V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1,
|
||||
DEFAULT_ACOMP_GAIN);
|
||||
sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
|
||||
V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, MIN_ACOMP_THRESHOLD,
|
||||
MAX_ACOMP_THRESHOLD, 1,
|
||||
V4L2_CID_AUDIO_COMPRESSION_THRESHOLD,
|
||||
MIN_ACOMP_THRESHOLD, MAX_ACOMP_THRESHOLD, 1,
|
||||
DEFAULT_ACOMP_THRESHOLD);
|
||||
sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
|
||||
V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0,
|
||||
|
|
@ -1463,9 +1463,11 @@ static int si4713_probe(struct i2c_client *client,
|
|||
V4L2_CID_TUNE_PREEMPHASIS,
|
||||
V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS);
|
||||
sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
|
||||
V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER, 1, DEFAULT_POWER_LEVEL);
|
||||
V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER,
|
||||
1, DEFAULT_POWER_LEVEL);
|
||||
sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
|
||||
V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP, 1, 0);
|
||||
V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP,
|
||||
1, 0);
|
||||
|
||||
if (hdl->error) {
|
||||
rval = hdl->error;
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче