PCI/AER: Log messages with pci_dev, not pcie_device

Log messages with pci_dev, not pcie_device.  Factor out common message
prefixes with dev_fmt().

Example output change:

  - aer 0000:00:00.0:pci002: AER enabled with IRQ ...
  + pcieport 0000:00:00.0: AER: enabled with IRQ ...

Link: https://lore.kernel.org/lkml/20190509141456.223614-5-helgaas@kernel.org
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
This commit is contained in:
Frederick Lawler 2019-05-07 18:24:50 -05:00 коммит произвёл Bjorn Helgaas
Родитель 10a9990c10
Коммит 9cc6f75b27
2 изменённых файлов: 22 добавлений и 17 удалений

Просмотреть файл

@ -12,6 +12,9 @@
* Andrew Patterson <andrew.patterson@hp.com>
*/
#define pr_fmt(fmt) "AER: " fmt
#define dev_fmt pr_fmt
#include <linux/cper.h>
#include <linux/pci.h>
#include <linux/pci-acpi.h>
@ -779,10 +782,11 @@ static void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info)
u8 bus = info->id >> 8;
u8 devfn = info->id & 0xff;
pci_info(dev, "AER: %s%s error received: %04x:%02x:%02x.%d\n",
info->multi_error_valid ? "Multiple " : "",
aer_error_severity_string[info->severity],
pci_domain_nr(dev->bus), bus, PCI_SLOT(devfn), PCI_FUNC(devfn));
pci_info(dev, "%s%s error received: %04x:%02x:%02x.%d\n",
info->multi_error_valid ? "Multiple " : "",
aer_error_severity_string[info->severity],
pci_domain_nr(dev->bus), bus, PCI_SLOT(devfn),
PCI_FUNC(devfn));
}
#ifdef CONFIG_ACPI_APEI_PCIEAER
@ -1376,23 +1380,24 @@ static int aer_probe(struct pcie_device *dev)
int status;
struct aer_rpc *rpc;
struct device *device = &dev->device;
struct pci_dev *port = dev->port;
rpc = devm_kzalloc(device, sizeof(struct aer_rpc), GFP_KERNEL);
if (!rpc)
return -ENOMEM;
rpc->rpd = dev->port;
rpc->rpd = port;
set_service_data(dev, rpc);
status = devm_request_threaded_irq(device, dev->irq, aer_irq, aer_isr,
IRQF_SHARED, "aerdrv", dev);
if (status) {
dev_err(device, "request AER IRQ %d failed\n", dev->irq);
pci_err(port, "request AER IRQ %d failed\n", dev->irq);
return status;
}
aer_enable_rootport(rpc);
dev_info(device, "AER enabled with IRQ %d\n", dev->irq);
pci_info(port, "enabled with IRQ %d\n", dev->irq);
return 0;
}

Просмотреть файл

@ -12,6 +12,8 @@
* Huang Ying <ying.huang@intel.com>
*/
#define dev_fmt(fmt) "aer_inject: " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/irq.h>
@ -332,14 +334,14 @@ static int aer_inject(struct aer_error_inj *einj)
return -ENODEV;
rpdev = pcie_find_root_port(dev);
if (!rpdev) {
pci_err(dev, "aer_inject: Root port not found\n");
pci_err(dev, "Root port not found\n");
ret = -ENODEV;
goto out_put;
}
pos_cap_err = dev->aer_cap;
if (!pos_cap_err) {
pci_err(dev, "aer_inject: Device doesn't support AER\n");
pci_err(dev, "Device doesn't support AER\n");
ret = -EPROTONOSUPPORT;
goto out_put;
}
@ -350,7 +352,7 @@ static int aer_inject(struct aer_error_inj *einj)
rp_pos_cap_err = rpdev->aer_cap;
if (!rp_pos_cap_err) {
pci_err(rpdev, "aer_inject: Root port doesn't support AER\n");
pci_err(rpdev, "Root port doesn't support AER\n");
ret = -EPROTONOSUPPORT;
goto out_put;
}
@ -398,14 +400,14 @@ static int aer_inject(struct aer_error_inj *einj)
if (!aer_mask_override && einj->cor_status &&
!(einj->cor_status & ~cor_mask)) {
ret = -EINVAL;
pci_warn(dev, "aer_inject: The correctable error(s) is masked by device\n");
pci_warn(dev, "The correctable error(s) is masked by device\n");
spin_unlock_irqrestore(&inject_lock, flags);
goto out_put;
}
if (!aer_mask_override && einj->uncor_status &&
!(einj->uncor_status & ~uncor_mask)) {
ret = -EINVAL;
pci_warn(dev, "aer_inject: The uncorrectable error(s) is masked by device\n");
pci_warn(dev, "The uncorrectable error(s) is masked by device\n");
spin_unlock_irqrestore(&inject_lock, flags);
goto out_put;
}
@ -460,19 +462,17 @@ static int aer_inject(struct aer_error_inj *einj)
if (device) {
edev = to_pcie_device(device);
if (!get_service_data(edev)) {
dev_warn(&edev->device,
"aer_inject: AER service is not initialized\n");
pci_warn(edev->port, "AER service is not initialized\n");
ret = -EPROTONOSUPPORT;
goto out_put;
}
dev_info(&edev->device,
"aer_inject: Injecting errors %08x/%08x into device %s\n",
pci_info(edev->port, "Injecting errors %08x/%08x into device %s\n",
einj->cor_status, einj->uncor_status, pci_name(dev));
local_irq_disable();
generic_handle_irq(edev->irq);
local_irq_enable();
} else {
pci_err(rpdev, "aer_inject: AER device not found\n");
pci_err(rpdev, "AER device not found\n");
ret = -ENODEV;
}
out_put: