microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: soc: multiplatform enablement 

This is a pretty significant branch. It's the introduction of the
 first multiplatform support on ARM, and with this (and the later
 branch) merged, it is now possible to build one kernel that contains
 support for highbank, vexpress, mvebu, socfpga, and picoxcell. More
 platforms will be convered over in the next few releases.
 
 Two critical last things had to be done for this to be practical and
 possible:
 * Today each platform has its own include directory under
   mach-<mach>/include/mach/*, and traditionally that is where a lot of
   driver/platform shared definitions have gone, such as platform data
   structures. They now need to move out to a common location instead,
   and this branch moves a large number of those out to
   include/linux/platform_data.
 * Each platform used to list the device trees to compile for its
   boards in mach-<mach>/Makefile.boot.
 
 Both of the above changes will mean that there are some merge
 conflicts to come (and some to resolve here). It's a one-time move and
 once it settles in, we should be good for quite a while. Sorry for the
 overhead.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO7aAAoJEIwa5zzehBx3bUIP/02U8PhkHJJrrowyIsWRBOql
 7LPJ53PRRgrpBdmEGzFD3TO3zaNyrjQRbYgNDvzHMO6NAMNvdRFouuWYjO11/tuB
 i32zssXCC+eUOEgbAo/U/lYq+UOvqw9gv6mU+3+i3OcGEhdKOaoT/DSLPQC4hoDm
 222TeLfFB3HJXu5n720dEQ9V3fO6TS1+bbh8TU3cjHqzceXsOrffZqOA5CQxUcRr
 KWwOjA0nALDwWcqgv45GJNwY3GTyAQ/hPMQavnuWK0voJ+qUYk5HftKocAK7C+py
 0T0OFOAHTwtyhvzJBxLC84M6Ox465BYXyeNjIB+2nG/Um9+mDoP0dnWpGy4c7DMU
 P5hyqbeLGeqjUXQuYtRmgMMc3UeHKoUGAfXW9eMsjLa6/M4NLGv//7E7LbZPpgMZ
 obkjwuesmcaYn/FRyj/yFmC35YlF4oCLziVzEtURZw3eKHHSUlhkTDSMNnkcZ0kZ
 Vv7kFxnD2Y46ixiwSJv30ErQnVkgI3MdqDlDxkE8r5+phYuK4gCrNaJtiwRh/oNw
 cFhpPxKuA0sJ9b6YRTzjC45eT/XZomEEr/uifCFeRNaCquyjYP00Mm8F0flSqwx9
 zi+emzPAwNmk1bvxMUM/idGnaj0V4p+BAYUAvkbSoqU1p1flzyhU88fGTSIyKOt6
 K5TCDS2v5hrVykK9TDwl
 =Tc6y
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc multiplatform enablement from Olof Johansson:
 "This is a pretty significant branch.  It's the introduction of the
  first multiplatform support on ARM, and with this (and the later
  branch) merged, it is now possible to build one kernel that contains
  support for highbank, vexpress, mvebu, socfpga, and picoxcell.  More
  platforms will be convered over in the next few releases.

  Two critical last things had to be done for this to be practical and
  possible:
   * Today each platform has its own include directory under
     mach-<mach>/include/mach/*, and traditionally that is where a lot
     of driver/platform shared definitions have gone, such as platform
     data structures.  They now need to move out to a common location
     instead, and this branch moves a large number of those out to
     include/linux/platform_data.
   * Each platform used to list the device trees to compile for its
     boards in mach-<mach>/Makefile.boot.

  Both of the above changes will mean that there are some merge
  conflicts to come (and some to resolve here).  It's a one-time move
  and once it settles in, we should be good for quite a while.  Sorry
  for the overhead."

Fix conflicts as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits)
  ARM: add v7 multi-platform defconfig
  ARM: msm: Move core.h contents into common.h
  ARM: highbank: call highbank_pm_init from .init_machine
  ARM: dtb: move all dtb targets to common Makefile
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ...
This commit is contained in:
Linus Torvalds 2012-10-01 19:11:38 -07:00
Родитель b9541d94bc 1ec9c26ad0
Коммит 9cd11c0c47
580 изменённых файлов: 1761 добавлений и 1873 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
Documentation/spi/ep93xx_spi
Просмотреть файл

@ -26,7 +26,7 @@ arch/arm/mach-ep93xx/ts72xx.c:
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <mach/ep93xx_spi.h>
#include <linux/platform_data/spi-ep93xx.h>
/* this is our GPIO line used for chip select */
#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9

165
arch/arm/Kconfig
Просмотреть файл

@ -202,6 +202,13 @@ config ARM_PATCH_PHYS_VIRT
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
config NEED_MACH_GPIO_H
bool
help
Select this when mach/gpio.h is required to provide special
definitions for this platform. The need for mach/gpio.h should
be avoided when possible.
config NEED_MACH_IO_H
bool
help
@ -247,26 +254,17 @@ config MMU
#
choice
prompt "ARM system type"
default ARCH_VERSATILE
default ARCH_MULTIPLATFORM
config ARCH_SOCFPGA
bool "Altera SOCFPGA family"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
select CACHE_L2X0
select CLKDEV_LOOKUP
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
select COMMON_CLK
select CPU_V7
select DW_APB_TIMER
select DW_APB_TIMER_OF
select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
help
This enables support for Altera SOCFPGA Cyclone V platform
depends on MMU
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
@ -318,30 +316,13 @@ config ARCH_VERSATILE
help
This enables support for ARM Ltd Versatile board.
config ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_PATA_PLATFORM
select ICST
select NO_IOPORT
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
This enables support for the ARM Ltd Versatile Express boards.
config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select CLKDEV_LOOKUP
select IRQ_DOMAIN
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
help
This enables support for systems based on Atmel
@ -364,24 +345,6 @@ config ARCH_BCM2835
This enables support for the Broadcom BCM2835 SoC. This SoC is
use in the Raspberry Pi, and Roku 2 devices.
config ARCH_HIGHBANK
bool "Calxeda Highbank-based"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select CACHE_L2X0
select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_SMP
select SPARSE_IRQ
select USE_OF
help
Support for the Calxeda Highbank SoC based boards.
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select CPU_ARM720T
@ -526,6 +489,8 @@ config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
@ -538,6 +503,8 @@ config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
@ -559,18 +526,6 @@ config ARCH_IXP4XX
help
Support for Intel's IXP4XX (XScale) family of processors.
config ARCH_MVEBU
bool "Marvell SOCs with Device Tree support"
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
select COMMON_CLK
help
Support for the Marvell SoC Family with device tree support
config ARCH_DOVE
bool "Marvell Dove"
select CPU_V7
@ -642,6 +597,7 @@ config ARCH_MMP
select PLAT_PXA
select SPARSE_IRQ
select GENERIC_ALLOCATOR
select NEED_MACH_GPIO_H
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
@ -688,25 +644,6 @@ config ARCH_TEGRA
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
config ARCH_PICOXCELL
bool "Picochip picoXcell"
select ARCH_REQUIRE_GPIOLIB
select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select CPU_V6K
select DW_APB_TIMER
select DW_APB_TIMER_OF
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_TCM
select NO_IOPORT
select SPARSE_IRQ
select USE_OF
help
This enables support for systems based on the Picochip picoXcell
family of Femtocell devices. The picoxcell support requires device tree
for all boards.
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
@ -723,6 +660,7 @@ config ARCH_PXA
select MULTI_IRQ_HANDLER
select ARM_CPU_SUSPEND if PM
select HAVE_IDE
select NEED_MACH_GPIO_H
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
@ -785,6 +723,7 @@ config ARCH_SA1100
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
select SPARSE_IRQ
help
@ -800,6 +739,7 @@ config ARCH_S3C24XX
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
help
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
@ -827,6 +767,7 @@ config ARCH_S3C64XX
select SAMSUNG_GPIOLIB_4BIT
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_GPIO_H
help
Samsung S3C64XX series based systems
@ -841,6 +782,7 @@ config ARCH_S5P64X0
select GENERIC_CLOCKEVENTS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
help
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
@ -855,6 +797,7 @@ config ARCH_S5PC100
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_GPIO_H
help
Samsung S5PC100 series based systems
@ -872,6 +815,7 @@ config ARCH_S5PV210
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
Samsung S5PV210/S5PC110 series based systems
@ -889,6 +833,7 @@ config ARCH_EXYNOS
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
@ -961,6 +906,7 @@ config ARCH_DAVINCI
select GENERIC_ALLOCATOR
select GENERIC_IRQ_CHIP
select ARCH_HAS_HOLES_MEMORYMODEL
select NEED_MACH_GPIO_H
help
Support for TI's DaVinci platform.
@ -973,6 +919,7 @@ config ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select ARCH_HAS_HOLES_MEMORYMODEL
select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
@ -1016,6 +963,50 @@ config ARCH_ZYNQ
Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice
menu "Multiple platform selection"
depends on ARCH_MULTIPLATFORM
comment "CPU Core family selection"
config ARCH_MULTI_V4
bool "ARMv4 based platforms (FA526, StrongARM)"
select ARCH_MULTI_V4_V5
depends on !ARCH_MULTI_V6_V7
config ARCH_MULTI_V4T
bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
select ARCH_MULTI_V4_V5
depends on !ARCH_MULTI_V6_V7
config ARCH_MULTI_V5
bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
select ARCH_MULTI_V4_V5
depends on !ARCH_MULTI_V6_V7
config ARCH_MULTI_V4_V5
bool
config ARCH_MULTI_V6
bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
select CPU_V6
select ARCH_MULTI_V6_V7
config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
select CPU_V7
select ARCH_VEXPRESS
default y
select ARCH_MULTI_V6_V7
config ARCH_MULTI_V6_V7
bool
config ARCH_MULTI_CPU_AUTO
def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
select ARCH_MULTI_V5
endmenu
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the
@ -1041,6 +1032,8 @@ source "arch/arm/mach-gemini/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/mach-highbank/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
@ -1076,6 +1069,8 @@ source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-picoxcell/Kconfig"
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/plat-pxa/Kconfig"
@ -1088,6 +1083,8 @@ source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/plat-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
@ -1994,7 +1991,7 @@ endchoice
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
depends on !ZBOOT_ROM && !ARM_LPAE
depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM

33
arch/arm/Kconfig.debug
Просмотреть файл

@ -275,6 +275,20 @@ choice
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
config DEBUG_MVEBU_UART
bool "Kernel low-level debugging messages via MVEBU UART"
depends on ARCH_MVEBU
help
Say Y here if you want kernel low-level debugging support
on MVEBU based platforms.
config DEBUG_PICOXCELL_UART
depends on ARCH_PICOXCELL
bool "Use PicoXcell UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on PicoXcell based platforms.
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
depends on ARCH_REALVIEW
@ -324,6 +338,13 @@ choice
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on SOCFPGA based platforms.
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
@ -352,6 +373,7 @@ choice
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
depends on !ARCH_MULTIPLATFORM
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
@ -387,6 +409,17 @@ choice
endchoice
config DEBUG_LL_INCLUDE
string
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
default "mach/debug-macro.S"
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL

148
arch/arm/Makefile
Просмотреть файл

@ -135,83 +135,78 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCM2835) := bcm2835
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_DOVE) := dove
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_HIGHBANK) := highbank
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
machine-$(CONFIG_ARCH_IOP32X) := iop32x
machine-$(CONFIG_ARCH_IOP33X) := iop33x
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
machine-$(CONFIG_ARCH_KS8695) := ks8695
machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx
machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_MVEBU) := mvebu
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2440
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_EXYNOS4) := exynos
machine-$(CONFIG_ARCH_EXYNOS5) := exynos
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_ARCH_SOCFPGA) := socfpga
machine-$(CONFIG_MACH_SPEAR1310) := spear13xx
machine-$(CONFIG_MACH_SPEAR1340) := spear13xx
machine-$(CONFIG_MACH_SPEAR300) := spear3xx
machine-$(CONFIG_MACH_SPEAR310) := spear3xx
machine-$(CONFIG_MACH_SPEAR320) := spear3xx
machine-$(CONFIG_MACH_SPEAR600) := spear6xx
machine-$(CONFIG_ARCH_ZYNQ) := zynq
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_BCM2835) += bcm2835
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_H720X) += h720x
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_IOP33X) += iop33x
machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx
machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MXC) += imx
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
machine-$(CONFIG_ARCH_OMAP1) += omap1
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PRIMA2) += prima2
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_RPC) += rpc
machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2412 s3c2440
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHARK) += shark
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
machine-$(CONFIG_ARCH_TEGRA) += tegra
machine-$(CONFIG_ARCH_U300) += u300
machine-$(CONFIG_ARCH_U8500) += ux500
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
machine-$(CONFIG_ARCH_VT8500) += vt8500
machine-$(CONFIG_ARCH_W90X900) += w90x900
machine-$(CONFIG_FOOTBRIDGE) += footbridge
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx
machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx
machine-$(CONFIG_MACH_SPEAR600) += spear6xx
machine-$(CONFIG_ARCH_ZYNQ) += zynq
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
plat-$(CONFIG_ARCH_ZYNQ) := versatile
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
plat-$(CONFIG_PLAT_S5P) := samsung
plat-$(CONFIG_PLAT_SPEAR) := spear
plat-$(CONFIG_PLAT_VERSATILE) := versatile
plat-$(CONFIG_ARCH_MXC) += mxc
plat-$(CONFIG_ARCH_OMAP) += omap
plat-$(CONFIG_ARCH_S3C64XX) += samsung
plat-$(CONFIG_ARCH_ZYNQ) += versatile
plat-$(CONFIG_PLAT_IOP) += iop
plat-$(CONFIG_PLAT_NOMADIK) += nomadik
plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung
plat-$(CONFIG_PLAT_S5P) += samsung
plat-$(CONFIG_PLAT_SPEAR) += spear
plat-$(CONFIG_PLAT_VERSATILE) += versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
@ -229,15 +224,20 @@ MACHINE := arch/arm/mach-$(word 1,$(machine-y))/
else
MACHINE :=
endif
ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
MACHINE :=
endif
machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
else
KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
endif
endif
export TEXT_OFFSET GZFLAGS MMUEXT

2
arch/arm/boot/Makefile
Просмотреть файл

@ -15,6 +15,8 @@ ifneq ($(MACHINE),)
include $(srctree)/$(MACHINE)/Makefile.boot
endif
include $(srctree)/arch/arm/boot/dts/Makefile
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR

6
arch/arm/boot/compressed/misc.c
Просмотреть файл

@ -25,7 +25,13 @@ unsigned int __machine_arch_type;
static void putstr(const char *ptr);
extern void error(char *x);
#ifdef CONFIG_ARCH_MULTIPLATFORM
static inline void putc(int c) {}
static inline void flush(void) {}
static inline void arch_decomp_setup(void) {}
#else
#include <mach/uncompress.h>
#endif
#ifdef CONFIG_DEBUG_ICEDCC

101
arch/arm/boot/dts/Makefile Normal file
Просмотреть файл

@ -0,0 +1,101 @@
ifeq ($(CONFIG_OF),y)
dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
at91sam9263ek.dtb \
at91sam9g20ek_2mmc.dtb \
at91sam9g20ek.dtb \
at91sam9g25ek.dtb \
at91sam9m10g45ek.dtb \
at91sam9n12ek.dtb \
ethernut5.dtb \
evk-pro3.dtb \
kizbox.dtb \
tny_a9260.dtb \
tny_a9263.dtb \
tny_a9g20.dtb \
usb_a9260.dtb \
usb_a9263.dtb \
usb_a9g20.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos5250-smdk5250.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \
imx53-ard.dtb \
imx53-evk.dtb \
imx53-qsb.dtb \
imx53-smd.dtb
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
kirkwood-dreamplug.dtb \
kirkwood-goflexnet.dtb \
kirkwood-ib62x0.dtb \
kirkwood-iconnect.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-xp-db.dtb
dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
imx53-ard.dtb \
imx53-evk.dtb \
imx53-qsb.dtb \
imx53-smd.dtb \
imx6q-arm2.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
imx28-cfa10049.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
omap4-panda.dtb \
omap4-pandaES.dtb \
omap4-var_som.dtb \
omap4-sdp.dtb \
omap5-evm.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
sh73a0-kzm9g.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
spear1340-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear310-evb.dtb \
spear320-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-plutux.dtb \
tegra20-seaboard.dtb \
tegra20-tec.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
vexpress-v2p-ca15_a7.dtb
endif

57
arch/arm/configs/multi_v7_defconfig Normal file
Просмотреть файл

@ -0,0 +1,57 @@
CONFIG_EXPERIMENTAL=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_SOCFPGA=y
# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
CONFIG_ARM_ERRATA_754322=y
CONFIG_SMP=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
CONFIG_ATA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_NETDEVICES=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_SI=y
CONFIG_I2C=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIOLIB=y
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_HIGHBANK_MC=y
CONFIG_EDAC_HIGHBANK_L2=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y

2
arch/arm/include/asm/gpio.h
Просмотреть файл

@ -6,7 +6,9 @@
#endif
/* not all ARM platforms necessarily support this API ... */
#ifdef CONFIG_NEED_MACH_GPIO_H
#include <mach/gpio.h>
#endif
#ifndef __ARM_GPIOLIB_COMPLEX
/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */

7
arch/arm/include/asm/mach/arch.h
Просмотреть файл

@ -14,6 +14,12 @@ struct tag;
struct meminfo;
struct sys_timer;
struct pt_regs;
struct smp_operations;
#ifdef CONFIG_SMP
#define smp_ops(ops) (&(ops))
#else
#define smp_ops(ops) (struct smp_operations *)NULL
#endif
struct machine_desc {
unsigned int nr; /* architecture number */
@ -35,6 +41,7 @@ struct machine_desc {
unsigned char reserve_lp1 :1; /* never has lp1 */
unsigned char reserve_lp2 :1; /* never has lp2 */
char restart_mode; /* default restart mode */
struct smp_operations *smp; /* SMP operations */
void (*fixup)(struct tag *, char **,
struct meminfo *);
void (*reserve)(void);/* reserve mem blocks */

48
arch/arm/include/asm/smp.h
Просмотреть файл

@ -60,15 +60,6 @@ extern int boot_secondary(unsigned int cpu, struct task_struct *);
*/
asmlinkage void secondary_start_kernel(void);
/*
* Perform platform specific initialisation of the specified CPU.
*/
extern void platform_secondary_init(unsigned int cpu);
/*
* Initialize cpu_possible map, and enable coherency
*/
extern void platform_smp_prepare_cpus(unsigned int);
/*
* Initial data for bringing up a secondary CPU.
@ -79,18 +70,47 @@ struct secondary_data {
void *stack;
};
extern struct secondary_data secondary_data;
extern volatile int pen_release;
extern int __cpu_disable(void);
extern int platform_cpu_disable(unsigned int cpu);
extern void __cpu_die(unsigned int cpu);
extern void cpu_die(void);
extern void platform_cpu_die(unsigned int cpu);
extern int platform_cpu_kill(unsigned int cpu);
extern void platform_cpu_enable(unsigned int cpu);
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
struct smp_operations {
#ifdef CONFIG_SMP
/*
* Setup the set of possible CPUs (via set_cpu_possible)
*/
void (*smp_init_cpus)(void);
/*
* Initialize cpu_possible map, and enable coherency
*/
void (*smp_prepare_cpus)(unsigned int max_cpus);
/*
* Perform platform specific initialisation of the specified CPU.
*/
void (*smp_secondary_init)(unsigned int cpu);
/*
* Boot a secondary CPU, and assign it the specified idle task.
* This also gives us the initial stack to use for this CPU.
*/
int (*smp_boot_secondary)(unsigned int cpu, struct task_struct *idle);
#ifdef CONFIG_HOTPLUG_CPU
int (*cpu_kill)(unsigned int cpu);
void (*cpu_die)(unsigned int cpu);
int (*cpu_disable)(unsigned int cpu);
#endif
#endif
};
/*
* set platform specific SMP operations
*/
extern void smp_set_ops(struct smp_operations *);
#endif /* ifndef __ASM_ARM_SMP_H */

4
arch/arm/include/asm/timex.h
Просмотреть файл

@ -13,7 +13,11 @@
#define _ASMARM_TIMEX_H
#include <asm/arch_timer.h>
#ifdef CONFIG_ARCH_MULTIPLATFORM
#define CLOCK_TICK_RATE 1000000
#else
#include <mach/timex.h>
#endif
typedef unsigned long cycles_t;

6
arch/arm/mach-highbank/include/mach/debug-macro.S → arch/arm/include/debug/highbank.S
Просмотреть файл

@ -10,10 +10,8 @@
*/
.macro addruart,rp,rv,tmp
movw \rv, #0x6000
movt \rv, #0xfee3
movw \rp, #0x6000
movt \rp, #0xfff3
ldr \rv, =0xfee36000
ldr \rp, =0xfff36000
.endm
#include <asm/hardware/debug-pl01x.S>

90
arch/arm/include/debug/icedcc.S Normal file
Просмотреть файл

@ -0,0 +1,90 @@
/*
* arch/arm/include/debug/icedcc.S
*
* Copyright (C) 1994-1999 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
@@ debug using ARM EmbeddedICE DCC channel
.macro addruart, rp, rv, tmp
.endm
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
.macro senduart, rd, rx
mcr p14, 0, \rd, c0, c5, 0
.endm
.macro busyuart, rd, rx
1001:
mrc p14, 0, \rx, c0, c1, 0
tst \rx, #0x20000000
beq 1001b
.endm
.macro waituart, rd, rx
mov \rd, #0x2000000
1001:
subs \rd, \rd, #1
bmi 1002f
mrc p14, 0, \rx, c0, c1, 0
tst \rx, #0x20000000
bne 1001b
1002:
.endm
#elif defined(CONFIG_CPU_XSCALE)
.macro senduart, rd, rx
mcr p14, 0, \rd, c8, c0, 0
.endm
.macro busyuart, rd, rx
1001:
mrc p14, 0, \rx, c14, c0, 0
tst \rx, #0x10000000
beq 1001b
.endm
.macro waituart, rd, rx
mov \rd, #0x10000000
1001:
subs \rd, \rd, #1
bmi 1002f
mrc p14, 0, \rx, c14, c0, 0
tst \rx, #0x10000000
bne 1001b
1002:
.endm
#else
.macro senduart, rd, rx
mcr p14, 0, \rd, c1, c0, 0
.endm
.macro busyuart, rd, rx
1001:
mrc p14, 0, \rx, c0, c0, 0
tst \rx, #2
beq 1001b
.endm
.macro waituart, rd, rx
mov \rd, #0x2000000
1001:
subs \rd, \rd, #1
bmi 1002f
mrc p14, 0, \rx, c0, c0, 0
tst \rx, #2
bne 1001b
1002:
.endm
#endif /* CONFIG_CPU_V6 */

3
arch/arm/mach-mvebu/include/mach/debug-macro.S → arch/arm/include/debug/mvebu.S
Просмотреть файл

@ -11,7 +11,8 @@
* published by the Free Software Foundation.
*/
#include <mach/armada-370-xp.h>
#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000
#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000
.macro addruart, rp, rv, tmp
ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE

4
arch/arm/mach-picoxcell/include/mach/debug-macro.S → arch/arm/include/debug/picoxcell.S
Просмотреть файл

@ -9,10 +9,10 @@
* accesses to the 8250.
*/
#include <linux/serial_reg.h>
#include <mach/hardware.h>
#include <mach/map.h>
#define UART_SHIFT 2
#define PICOXCELL_UART1_BASE 0x80230000
#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
.macro addruart, rp, rv, tmp
ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)

0
arch/arm/mach-socfpga/include/mach/debug-macro.S → arch/arm/include/debug/socfpga.S
Просмотреть файл

0
arch/arm/mach-vexpress/include/mach/debug-macro.S → arch/arm/include/debug/vexpress.S
Просмотреть файл

87
arch/arm/kernel/debug.S
Просмотреть файл

@ -20,90 +20,9 @@
* references to these in a production kernel!
*/
#if defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel
.macro addruart, rp, rv, tmp
.endm
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
.macro senduart, rd, rx
mcr p14, 0, \rd, c0, c5, 0
.endm
.macro busyuart, rd, rx
1001:
mrc p14, 0, \rx, c0, c1, 0
tst \rx, #0x20000000
beq 1001b
.endm
.macro waituart, rd, rx
mov \rd, #0x2000000
1001:
subs \rd, \rd, #1
bmi 1002f
mrc p14, 0, \rx, c0, c1, 0
tst \rx, #0x20000000
bne 1001b
1002:
.endm
#elif defined(CONFIG_CPU_XSCALE)
.macro senduart, rd, rx
mcr p14, 0, \rd, c8, c0, 0
.endm
.macro busyuart, rd, rx
1001:
mrc p14, 0, \rx, c14, c0, 0
tst \rx, #0x10000000
beq 1001b
.endm
.macro waituart, rd, rx
mov \rd, #0x10000000
1001:
subs \rd, \rd, #1
bmi 1002f
mrc p14, 0, \rx, c14, c0, 0
tst \rx, #0x10000000
bne 1001b
1002:
.endm
#else
.macro senduart, rd, rx
mcr p14, 0, \rd, c1, c0, 0
.endm
.macro busyuart, rd, rx
1001:
mrc p14, 0, \rx, c0, c0, 0
tst \rx, #2
beq 1001b
.endm
.macro waituart, rd, rx
mov \rd, #0x2000000
1001:
subs \rd, \rd, #1
bmi 1002f
mrc p14, 0, \rx, c0, c0, 0
tst \rx, #2
bne 1001b
1002:
.endm
#endif /* CONFIG_CPU_V6 */
#elif !defined(CONFIG_DEBUG_SEMIHOSTING)
#include <mach/debug-macro.S>
#endif /* CONFIG_DEBUG_ICEDCC */
#if !defined(CONFIG_DEBUG_SEMIHOSTING)
#include CONFIG_DEBUG_LL_INCLUDE
#endif
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2

4
arch/arm/kernel/head.S
Просмотреть файл

@ -23,8 +23,8 @@
#include <asm/thread_info.h>
#include <asm/pgtable.h>
#ifdef CONFIG_DEBUG_LL
#include <mach/debug-macro.S>
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
#include CONFIG_DEBUG_LL_INCLUDE
#endif
/*

4
arch/arm/kernel/setup.c
Просмотреть файл

@ -977,8 +977,10 @@ void __init setup_arch(char **cmdline_p)
unflatten_device_tree();
#ifdef CONFIG_SMP
if (is_smp())
if (is_smp()) {
smp_set_ops(mdesc->smp);
smp_init_cpus();
}
#endif
reserve_crashkernel();

72
arch/arm/kernel/smp.c
Просмотреть файл

@ -19,7 +19,6 @@
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
#include <linux/percpu.h>
@ -27,6 +26,7 @@
#include <linux/completion.h>
#include <linux/atomic.h>
#include <asm/smp.h>
#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
@ -42,6 +42,7 @@
#include <asm/ptrace.h>
#include <asm/localtimer.h>
#include <asm/smp_plat.h>
#include <asm/mach/arch.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
@ -50,6 +51,12 @@
*/
struct secondary_data secondary_data;
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
*/
volatile int __cpuinitdata pen_release = -1;
enum ipi_msg_type {
IPI_TIMER = 2,
IPI_RESCHEDULE,
@ -60,6 +67,14 @@ enum ipi_msg_type {
static DECLARE_COMPLETION(cpu_running);
static struct smp_operations smp_ops;
void __init smp_set_ops(struct smp_operations *ops)
{
if (ops)
smp_ops = *ops;
};
int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
@ -100,13 +115,64 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
return ret;
}
/* platform specific SMP operations */
void __init smp_init_cpus(void)
{
if (smp_ops.smp_init_cpus)
smp_ops.smp_init_cpus();
}
static void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
if (smp_ops.smp_prepare_cpus)
smp_ops.smp_prepare_cpus(max_cpus);
}
static void __cpuinit platform_secondary_init(unsigned int cpu)
{
if (smp_ops.smp_secondary_init)
smp_ops.smp_secondary_init(cpu);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
if (smp_ops.smp_boot_secondary)
return smp_ops.smp_boot_secondary(cpu, idle);
return -ENOSYS;
}
#ifdef CONFIG_HOTPLUG_CPU
static void percpu_timer_stop(void);
static int platform_cpu_kill(unsigned int cpu)
{
if (smp_ops.cpu_kill)
return smp_ops.cpu_kill(cpu);
return 1;
}
static void platform_cpu_die(unsigned int cpu)
{
if (smp_ops.cpu_die)
smp_ops.cpu_die(cpu);
}
static int platform_cpu_disable(unsigned int cpu)
{
if (smp_ops.cpu_disable)
return smp_ops.cpu_disable(cpu);
/*
* By default, allow disabling all CPUs except the first one,
* since this is special on a lot of platforms, e.g. because
* of clock tick interrupts.
*/
return cpu == 0 ? -EPERM : 0;
}
/*
* __cpu_disable runs on the processor to be shutdown.
*/
int __cpu_disable(void)
int __cpuinit __cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
int ret;
@ -149,7 +215,7 @@ static DECLARE_COMPLETION(cpu_died);
* called on the thread which is asking for a CPU to be shutdown -
* waits until shutdown has completed, or it is timed out.
*/
void __cpu_die(unsigned int cpu)
void __cpuinit __cpu_die(unsigned int cpu)
{
if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
pr_err("CPU%u: cpu didn't die\n", cpu);

24
arch/arm/mach-at91/Makefile.boot
Просмотреть файл

@ -12,27 +12,3 @@ else
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
# Keep dtb files sorted alphabetically for each SoC
# sam9260
dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9263
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
# sam9g20
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
# sam9g45
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
# sam9n12
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
# sam9x5
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb

2
arch/arm/mach-at91/at91sam9g45_devices.c
Просмотреть файл

@ -31,7 +31,7 @@
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at_hdmac.h>
#include <linux/platform_data/dma-atmel.h>
#include <mach/atmel-mci.h>
#include <media/atmel-isi.h>

2
arch/arm/mach-at91/at91sam9rl_devices.c
Просмотреть файл

@ -22,7 +22,7 @@
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at_hdmac.h>
#include <linux/platform_data/dma-atmel.h>
#include "generic.h"

2
arch/arm/mach-at91/include/mach/atmel-mci.h
Просмотреть файл

@ -1,7 +1,7 @@
#ifndef __MACH_ATMEL_MCI_H
#define __MACH_ATMEL_MCI_H
#include <mach/at_hdmac.h>
#include <linux/platform_data/dma-atmel.h>
/**
* struct mci_dma_data - DMA data for MCI interface

2
arch/arm/mach-bcm2835/Makefile.boot
Просмотреть файл

@ -1,5 +1,3 @@
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-y += bcm2835-rpi-b.dtb

2
arch/arm/mach-davinci/aemif.c
Просмотреть файл

@ -15,7 +15,7 @@
#include <linux/module.h>
#include <linux/time.h>
#include <mach/aemif.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
/* Timing value configuration */

8
arch/arm/mach-davinci/board-da830-evm.c
Просмотреть файл

@ -28,11 +28,11 @@
#include <mach/cp_intc.h>
#include <mach/mux.h>
#include <mach/nand.h>
#include <linux/platform_data/mtd-davinci.h>
#include <mach/da8xx.h>
#include <mach/usb.h>
#include <mach/aemif.h>
#include <mach/spi.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/spi-davinci.h>
#define DA830_EVM_PHY_ID ""
/*

6
arch/arm/mach-davinci/board-da850-evm.c
Просмотреть файл

@ -40,10 +40,10 @@
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <mach/nand.h>
#include <linux/platform_data/mtd-davinci.h>
#include <mach/mux.h>
#include <mach/aemif.h>
#include <mach/spi.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/spi-davinci.h>
#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)

8
arch/arm/mach-davinci/board-dm355-evm.c
Просмотреть файл

@ -26,11 +26,11 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/i2c.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/usb.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"

8
arch/arm/mach-davinci/board-dm355-leopard.c
Просмотреть файл

@ -23,11 +23,11 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/i2c.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/usb.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"

8
arch/arm/mach-davinci/board-dm365-evm.c
Просмотреть файл

@ -33,11 +33,11 @@
#include <mach/mux.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mmc.h>
#include <mach/nand.h>
#include <mach/keyscan.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/keyscan-davinci.h>
#include <media/tvp514x.h>

10
arch/arm/mach-davinci/board-dm644x-evm.c
Просмотреть файл

@ -31,13 +31,13 @@
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/usb.h>
#include <mach/aemif.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"

6
arch/arm/mach-davinci/board-dm646x-evm.c
Просмотреть файл

@ -38,11 +38,11 @@
#include <mach/common.h>
#include <mach/serial.h>
#include <mach/i2c.h>
#include <mach/nand.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <mach/clock.h>
#include <mach/cdce949.h>
#include <mach/aemif.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include "davinci.h"
#include "clock.h"

4
arch/arm/mach-davinci/board-mityomapl138.c
Просмотреть файл

@ -26,9 +26,9 @@
#include <mach/common.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <mach/nand.h>
#include <linux/platform_data/mtd-davinci.h>
#include <mach/mux.h>
#include <mach/spi.h>
#include <linux/platform_data/spi-davinci.h>
#define MITYOMAPL138_PHY_ID ""

8
arch/arm/mach-davinci/board-neuros-osd2.c
Просмотреть файл

@ -31,12 +31,12 @@
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/usb.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"

4
arch/arm/mach-davinci/board-sffsdr.c
Просмотреть файл

@ -36,10 +36,10 @@
#include <asm/mach/flash.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <linux/platform_data/usb-davinci.h>
#include "davinci.h"

2
arch/arm/mach-davinci/davinci.h
Просмотреть файл

@ -24,7 +24,7 @@
#include <linux/spi/spi.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
#include <linux/platform_data/keyscan-davinci.h>
#include <mach/hardware.h>
#include <media/davinci/vpfe_capture.h>

4
arch/arm/mach-davinci/devices.c
Просмотреть файл

@ -15,12 +15,12 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <linux/platform_data/i2c-davinci.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
#include <mach/edma.h>
#include <mach/mmc.h>
#include <linux/platform_data/mmc-davinci.h>
#include <mach/time.h>
#include "davinci.h"

2
arch/arm/mach-davinci/dm355.c
Просмотреть файл

@ -27,7 +27,7 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
#include <mach/spi.h>
#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"

4
arch/arm/mach-davinci/dm365.c
Просмотреть файл

@ -30,8 +30,8 @@
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
#include <mach/spi.h>
#include <linux/platform_data/keyscan-davinci.h>
#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
#include "davinci.h"

8
arch/arm/mach-davinci/include/mach/da8xx.h
Просмотреть файл

@ -19,12 +19,12 @@
#include <mach/serial.h>
#include <mach/edma.h>
#include <mach/i2c.h>
#include <mach/asp.h>
#include <mach/mmc.h>
#include <mach/usb.h>
#include <mach/pm.h>
#include <mach/spi.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_data/spi-davinci.h>
extern void __iomem *da8xx_syscfg0_base;
extern void __iomem *da8xx_syscfg1_base;

4
arch/arm/mach-davinci/include/mach/tnetv107x.h
Просмотреть файл

@ -36,8 +36,8 @@
#include <linux/input/matrix_keypad.h>
#include <linux/mfd/ti_ssp.h>
#include <mach/mmc.h>
#include <mach/nand.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <mach/serial.h>
struct tnetv107x_device_info {

2
arch/arm/mach-davinci/usb.c
Просмотреть файл

@ -10,7 +10,7 @@
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/usb.h>
#include <linux/platform_data/usb-davinci.h>
#define DAVINCI_USB_OTG_BASE 0x01c64000

2
arch/arm/mach-dove/common.c
Просмотреть файл

@ -28,7 +28,7 @@
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
#include <plat/ehci-orion.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"

9
arch/arm/mach-dove/include/mach/gpio.h
Просмотреть файл

@ -1,9 +0,0 @@
/*
* arch/arm/mach-dove/include/mach/gpio.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <plat/gpio.h>

1
arch/arm/mach-dove/irq.c
Просмотреть файл

@ -18,6 +18,7 @@
#include <asm/mach/irq.h>
#include <mach/pm.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include "common.h"
static void pmu_irq_mask(struct irq_data *d)

1
arch/arm/mach-dove/mpp.c
Просмотреть файл

@ -13,6 +13,7 @@
#include <linux/io.h>
#include <plat/mpp.h>
#include <mach/dove.h>
#include <plat/orion-gpio.h>
#include "mpp.h"
struct dove_mpp_grp {

6
arch/arm/mach-ep93xx/core.c
Просмотреть файл

@ -36,9 +36,9 @@
#include <linux/export.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_keypad.h>
#include <mach/ep93xx_spi.h>
#include <linux/platform_data/video-ep93xx.h>
#include <linux/platform_data/keypad-ep93xx.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/mach/map.h>

2
arch/arm/mach-ep93xx/dma.c
Просмотреть файл

@ -25,7 +25,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/dma.h>
#include <linux/platform_data/dma-ep93xx.h>
#include <mach/hardware.h>
#include "soc.h"

4
arch/arm/mach-ep93xx/edb93xx.c
Просмотреть файл

@ -35,8 +35,8 @@
#include <sound/cs4271.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
#include <linux/platform_data/video-ep93xx.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>

1
arch/arm/mach-ep93xx/include/mach/gpio.h
Просмотреть файл

@ -1 +0,0 @@
/* empty */

2
arch/arm/mach-ep93xx/simone.c
Просмотреть файл

@ -22,7 +22,7 @@
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>

2
arch/arm/mach-ep93xx/snappercl15.c
Просмотреть файл

@ -28,7 +28,7 @@
#include <linux/mtd/nand.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>

4
arch/arm/mach-ep93xx/vision_ep9307.c
Просмотреть файл

@ -30,8 +30,8 @@
#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
#include <linux/platform_data/video-ep93xx.h>
#include <linux/platform_data/spi-ep93xx.h>
#include <mach/gpio-ep93xx.h>
#include <asm/hardware/vic.h>

3
arch/arm/mach-exynos/Makefile.boot
Просмотреть файл

@ -1,5 +1,2 @@
zreladdr-y += 0x40008000
params_phys-y := 0x40000100
dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb exynos4210-trats.dtb
dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb

5
arch/arm/mach-exynos/common.h
Просмотреть файл

@ -14,6 +14,7 @@
extern struct sys_timer exynos4_timer;
struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
void exynos5_init_irq(void);
@ -59,4 +60,8 @@ void exynos4212_register_clocks(void);
#define exynos4212_register_clocks()
#endif
extern struct smp_operations exynos_smp_ops;
extern void exynos_cpu_die(unsigned int cpu);
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

2
arch/arm/mach-exynos/dev-audio.c
Просмотреть файл

@ -16,7 +16,7 @@
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>

2
arch/arm/mach-exynos/dev-ohci.c
Просмотреть файл

@ -15,7 +15,7 @@
#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/ohci.h>
#include <linux/platform_data/usb-exynos.h>
#include <plat/devs.h>
#include <plat/usb-phy.h>

18
arch/arm/mach-exynos/hotplug.c
Просмотреть файл

@ -21,7 +21,7 @@
#include <mach/regs-pmu.h>
extern volatile int pen_release;
#include "common.h"
static inline void cpu_enter_lowpower(void)
{
@ -95,17 +95,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
}
}
int platform_cpu_kill(unsigned int cpu)
{
return 1;
}
/*
* platform-specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
void platform_cpu_die(unsigned int cpu)
void __ref exynos_cpu_die(unsigned int cpu)
{
int spurious = 0;
@ -124,12 +119,3 @@ void platform_cpu_die(unsigned int cpu)
if (spurious)
pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
}
int platform_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
* e.g. clock tick interrupts)
*/
return cpu == 0 ? -EPERM : 0;
}

1
arch/arm/mach-exynos/mach-armlex4210.c
Просмотреть файл

@ -199,6 +199,7 @@ static void __init armlex4210_machine_init(void)
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.handle_irq = gic_handle_irq,

1
arch/arm/mach-exynos/mach-exynos5-dt.c
Просмотреть файл

@ -95,6 +95,7 @@ static char const *exynos5250_dt_compat[] __initdata = {
DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.init_irq = exynos5_init_irq,
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos5250_dt_map_io,
.handle_irq = gic_handle_irq,
.init_machine = exynos5250_dt_machine_init,

7
arch/arm/mach-exynos/mach-nuri.c
Просмотреть файл

@ -45,14 +45,14 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/ehci.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/camport.h>
#include <plat/mipi_csis.h>
#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
@ -1383,6 +1383,7 @@ static void __init nuri_machine_init(void)
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.handle_irq = gic_handle_irq,

7
arch/arm/mach-exynos/mach-origen.c
Просмотреть файл

@ -36,8 +36,8 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
#include <plat/ehci.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
@ -45,7 +45,7 @@
#include <plat/mfc.h>
#include <plat/hdmi.h>
#include <mach/ohci.h>
#include <linux/platform_data/usb-exynos.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
@ -812,6 +812,7 @@ static void __init origen_machine_init(void)
MACHINE_START(ORIGEN, "ORIGEN")
/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
.handle_irq = gic_handle_irq,

4
arch/arm/mach-exynos/mach-smdk4x12.c
Просмотреть файл

@ -33,7 +33,7 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
#include <plat/regs-fb.h>
@ -376,6 +376,7 @@ static void __init smdk4x12_machine_init(void)
MACHINE_START(SMDK4212, "SMDK4212")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,
@ -389,6 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.handle_irq = gic_handle_irq,

8
arch/arm/mach-exynos/mach-smdkv310.c
Просмотреть файл

@ -35,16 +35,16 @@
#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/ehci.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/hdmi.h>
#include <mach/map.h>
#include <mach/ohci.h>
#include <linux/platform_data/usb-exynos.h>
#include <drm/exynos_drm.h>
#include "common.h"
@ -424,6 +424,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,
@ -436,6 +437,7 @@ MACHINE_END
MACHINE_START(SMDKC210, "SMDKC210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.handle_irq = gic_handle_irq,

5
arch/arm/mach-exynos/mach-universal_c210.c
Просмотреть файл

@ -34,7 +34,7 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/fb.h>
#include <plat/mfc.h>
@ -43,7 +43,7 @@
#include <plat/fimc-core.h>
#include <plat/s5p-time.h>
#include <plat/camport.h>
#include <plat/mipi_csis.h>
#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
@ -1155,6 +1155,7 @@ static void __init universal_machine_init(void)
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.handle_irq = gic_handle_irq,

27
arch/arm/mach-exynos/platsmp.c
Просмотреть файл

@ -32,18 +32,13 @@
#include <plat/cpu.h>
#include "common.h"
extern void exynos4_secondary_startup(void);
#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM5 : S5P_VA_SYSRAM)
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
*/
volatile int __cpuinitdata pen_release = -1;
/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
@ -64,7 +59,7 @@ static void __iomem *scu_base_addr(void)
static DEFINE_SPINLOCK(boot_lock);
void __cpuinit platform_secondary_init(unsigned int cpu)
static void __cpuinit exynos_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@ -86,7 +81,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
@ -161,7 +156,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* which may be present or become present in the system.
*/
void __init smp_init_cpus(void)
static void __init exynos_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
@ -184,7 +179,7 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
{
if (!soc_is_exynos5250())
scu_enable(scu_base_addr());
@ -198,3 +193,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
__raw_writel(virt_to_phys(exynos4_secondary_startup),
CPU1_BOOT_REG);
}
struct smp_operations exynos_smp_ops __initdata = {
.smp_init_cpus = exynos_smp_init_cpus,
.smp_prepare_cpus = exynos_smp_prepare_cpus,
.smp_secondary_init = exynos_secondary_init,
.smp_boot_secondary = exynos_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = exynos_cpu_die,
#endif
};

2
arch/arm/mach-exynos/setup-i2c0.c
Просмотреть файл

@ -14,7 +14,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/cpu.h>

2
arch/arm/mach-exynos/setup-i2c1.c
Просмотреть файл

@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)

2
arch/arm/mach-exynos/setup-i2c2.c
Просмотреть файл

@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c2_cfg_gpio(struct platform_device *dev)

2
arch/arm/mach-exynos/setup-i2c3.c
Просмотреть файл

@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c3_cfg_gpio(struct platform_device *dev)

2
arch/arm/mach-exynos/setup-i2c4.c
Просмотреть файл

@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c4_cfg_gpio(struct platform_device *dev)

2
arch/arm/mach-exynos/setup-i2c5.c
Просмотреть файл

@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c5_cfg_gpio(struct platform_device *dev)

2
arch/arm/mach-exynos/setup-i2c6.c
Просмотреть файл

@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c6_cfg_gpio(struct platform_device *dev)

2
arch/arm/mach-exynos/setup-i2c7.c
Просмотреть файл

@ -13,7 +13,7 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
void s3c_i2c7_cfg_gpio(struct platform_device *dev)

15
arch/arm/mach-highbank/Kconfig Normal file
Просмотреть файл

@ -0,0 +1,15 @@
config ARCH_HIGHBANK
bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select CACHE_L2X0
select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_SMP
select SPARSE_IRQ
select USE_OF

1
arch/arm/mach-highbank/Makefile.boot
Просмотреть файл

@ -1 +0,0 @@
zreladdr-y := 0x00008000

9
arch/arm/mach-highbank/core.h
Просмотреть файл

@ -8,4 +8,13 @@ extern void highbank_lluart_map_io(void);
static inline void highbank_lluart_map_io(void) {}
#endif
#ifdef CONFIG_PM_SLEEP
extern void highbank_pm_init(void);
#else
static inline void highbank_pm_init(void) {}
#endif
extern void highbank_smc1(int fn, int arg);
extern void highbank_cpu_die(unsigned int cpu);
extern struct smp_operations highbank_smp_ops;

2
arch/arm/mach-highbank/highbank.c
Просмотреть файл

@ -152,6 +152,7 @@ static void highbank_power_off(void)
static void __init highbank_init(void)
{
pm_power_off = highbank_power_off;
highbank_pm_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@ -162,6 +163,7 @@ static const char *highbank_match[] __initconst = {
};
DT_MACHINE_START(HIGHBANK, "Highbank")
.smp = smp_ops(highbank_smp_ops),
.map_io = highbank_map_io,
.init_irq = highbank_init_irq,
.timer = &highbank_timer,

16
arch/arm/mach-highbank/hotplug.c
Просмотреть файл

@ -24,16 +24,11 @@
extern void secondary_startup(void);
int platform_cpu_kill(unsigned int cpu)
{
return 1;
}
/*
* platform-specific code to shutdown a CPU
*
*/
void platform_cpu_die(unsigned int cpu)
void __ref highbank_cpu_die(unsigned int cpu)
{
flush_cache_all();
@ -45,12 +40,3 @@ void platform_cpu_die(unsigned int cpu)
/* We should never return from idle */
panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
}
int platform_cpu_disable(unsigned int cpu)
{
/*
* CPU0 should not be shut down via hotplug. cpu_idle can WFI
* or a proper shutdown or hibernate should be used.
*/
return cpu == 0 ? -EPERM : 0;
}

1
arch/arm/mach-highbank/include/mach/gpio.h
Просмотреть файл

@ -1 +0,0 @@
/* empty */

6
arch/arm/mach-highbank/include/mach/timex.h
Просмотреть файл

@ -1,6 +0,0 @@
#ifndef __MACH_TIMEX_H
#define __MACH_TIMEX_H
#define CLOCK_TICK_RATE 1000000
#endif

9
arch/arm/mach-highbank/include/mach/uncompress.h
Просмотреть файл

@ -1,9 +0,0 @@
#ifndef __MACH_UNCOMPRESS_H
#define __MACH_UNCOMPRESS_H
#define putc(c)
#define flush()
#define arch_decomp_setup()
#define arch_decomp_wdog()
#endif

18
arch/arm/mach-highbank/platsmp.c
Просмотреть файл

@ -25,12 +25,12 @@
extern void secondary_startup(void);
void __cpuinit platform_secondary_init(unsigned int cpu)
static void __cpuinit highbank_secondary_init(unsigned int cpu)
{
gic_secondary_init(0);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
gic_raise_softirq(cpumask_of(cpu), 0);
return 0;
@ -40,7 +40,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
void __init smp_init_cpus(void)
static void __init highbank_smp_init_cpus(void)
{
unsigned int i, ncores;
@ -61,7 +61,7 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
@ -76,3 +76,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
for (i = 1; i < max_cpus; i++)
highbank_set_cpu_jump(i, secondary_startup);
}
struct smp_operations highbank_smp_ops __initdata = {
.smp_init_cpus = highbank_smp_init_cpus,
.smp_prepare_cpus = highbank_smp_prepare_cpus,
.smp_secondary_init = highbank_secondary_init,
.smp_boot_secondary = highbank_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = highbank_cpu_die,
#endif
};

4
arch/arm/mach-highbank/pm.c
Просмотреть файл

@ -47,9 +47,7 @@ static const struct platform_suspend_ops highbank_pm_ops = {
.valid = suspend_valid_only_mem,
};
static int __init highbank_pm_init(void)
void __init highbank_pm_init(void)
{
suspend_set_ops(&highbank_pm_ops);
return 0;
}
module_init(highbank_pm_init);

11
arch/arm/mach-imx/Makefile.boot
Просмотреть файл

@ -37,14 +37,3 @@ initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
dtb-$(CONFIG_SOC_IMX53) += imx53-ard.dtb \
imx53-evk.dtb \
imx53-qsb.dtb \
imx53-smd.dtb \
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \

2
arch/arm/mach-imx/ehci-imx25.c
Просмотреть файл

@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/mxc_ehci.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600

2
arch/arm/mach-imx/ehci-imx27.c
Просмотреть файл

@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/mxc_ehci.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600

2
arch/arm/mach-imx/ehci-imx31.c
Просмотреть файл

@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/mxc_ehci.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600

2
arch/arm/mach-imx/ehci-imx35.c
Просмотреть файл

@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/mxc_ehci.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#define USBCTRL_OTGBASE_OFFSET 0x600

2
arch/arm/mach-imx/ehci-imx5.c
Просмотреть файл

@ -17,7 +17,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/mxc_ehci.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200

16
arch/arm/mach-imx/hotplug.c
Просмотреть файл

@ -15,11 +15,6 @@
#include <asm/cp15.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
{
return 1;
}
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
@ -47,7 +42,7 @@ static inline void cpu_enter_lowpower(void)
*
* Called with IRQs disabled
*/
void platform_cpu_die(unsigned int cpu)
void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
@ -56,12 +51,3 @@ void platform_cpu_die(unsigned int cpu)
while (1)
;
}
int platform_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
* e.g. clock tick interrupts)
*/
return cpu == 0 ? -EPERM : 0;
}

1
arch/arm/mach-imx/mach-imx6q.c
Просмотреть файл

@ -215,6 +215,7 @@ static const char *imx6q_dt_compat[] __initdata = {
};
DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
.smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
.handle_irq = imx6q_handle_irq,

2
arch/arm/mach-imx/mach-mx31moboard.c
Просмотреть файл

@ -47,7 +47,7 @@
#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include <mach/ulpi.h>
#include <mach/ssi.h>
#include <linux/platform_data/asoc-imx-ssi.h>
#include "devices-imx31.h"

2
arch/arm/mach-imx/mx1-camera-fiq-ksym.c
Просмотреть файл

@ -11,7 +11,7 @@
#include <linux/platform_device.h>
#include <linux/module.h>
#include <mach/mx1_camera.h>
#include <linux/platform_data/camera-mx1.h>
/* IMX camera FIQ handler */
EXPORT_SYMBOL(mx1_camera_sof_fiq_start);

18
arch/arm/mach-imx/platsmp.c
Просмотреть файл

@ -41,7 +41,7 @@ void __init imx_scu_map_io(void)
scu_base = IMX_IO_ADDRESS(base);
}
void __cpuinit platform_secondary_init(unsigned int cpu)
static void __cpuinit imx_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@ -51,7 +51,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
gic_secondary_init(0);
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
imx_set_cpu_jump(cpu, v7_secondary_startup);
imx_enable_cpu(cpu, true);
@ -62,7 +62,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
void __init smp_init_cpus(void)
static void __init imx_smp_init_cpus(void)
{
int i, ncores;
@ -79,7 +79,17 @@ void imx_smp_prepare(void)
scu_enable(scu_base);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
{
imx_smp_prepare();
}
struct smp_operations imx_smp_ops __initdata = {
.smp_init_cpus = imx_smp_init_cpus,
.smp_prepare_cpus = imx_smp_prepare_cpus,
.smp_secondary_init = imx_secondary_init,
.smp_boot_secondary = imx_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = imx_cpu_die,
#endif
};

2
arch/arm/mach-ixp4xx/include/mach/gpio.h
Просмотреть файл

@ -1,2 +0,0 @@
/* empty */

11
arch/arm/mach-kirkwood/Makefile.boot
Просмотреть файл

@ -1,14 +1,3 @@
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb
dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb
dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше