diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index a1650d0ba6af..3d8783831e85 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -184,8 +184,10 @@ struct i915_mmu_object;
 enum intel_dpll_id {
 	DPLL_ID_PRIVATE = -1, /* non-shared dpll in use */
 	/* real shared dpll ids must be >= 0 */
-	DPLL_ID_PCH_PLL_A,
-	DPLL_ID_PCH_PLL_B,
+	DPLL_ID_PCH_PLL_A = 0,
+	DPLL_ID_PCH_PLL_B = 1,
+	DPLL_ID_WRPLL1 = 0,
+	DPLL_ID_WRPLL2 = 1,
 };
 #define I915_NUM_PLLS 2
 
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 195d52ef512f..bf6f1c2dea8c 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -784,9 +784,11 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
 		if (reg == WRPLL_CTL1) {
 			plls->wrpll1_refcount++;
 			intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_WRPLL1;
+			intel_crtc->config.shared_dpll = DPLL_ID_WRPLL1;
 		} else {
 			plls->wrpll2_refcount++;
 			intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_WRPLL2;
+			intel_crtc->config.shared_dpll = DPLL_ID_WRPLL2;
 		}
 	}
 
@@ -1315,10 +1317,25 @@ int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
 	}
 }
 
+static char *hsw_ddi_pll_names[] = {
+	"WRPLL 1",
+	"WRPLL 2",
+};
+
 void intel_ddi_pll_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t val = I915_READ(LCPLL_CTL);
+	int i;
+
+	/* Dummy setup until everything is moved over to avoid upsetting the hw
+	 * state cross checker. */
+	dev_priv->num_shared_dpll = 0;
+
+	for (i = 0; i < 2; i++) {
+		dev_priv->shared_dplls[i].id = i;
+		dev_priv->shared_dplls[i].name = hsw_ddi_pll_names[i];
+	}
 
 	/* The LCPLL register should be turned on by the BIOS. For now let's
 	 * just check its state and print errors in case something is wrong.
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e26df6783406..0874f3589722 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7583,6 +7583,16 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
 	port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
 
 	pipe_config->ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
+
+	switch (pipe_config->ddi_pll_sel) {
+	case PORT_CLK_SEL_WRPLL1:
+		pipe_config->shared_dpll = DPLL_ID_WRPLL1;
+		break;
+	case PORT_CLK_SEL_WRPLL2:
+		pipe_config->shared_dpll = DPLL_ID_WRPLL2;
+		break;
+	}
+
 	/*
 	 * Haswell has only FDI/PCH transcoder A. It is which is connected to
 	 * DDI E. So just check whether this pipe is wired to DDI E and whether
@@ -11286,12 +11296,6 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
 	.page_flip = intel_crtc_page_flip,
 };
 
-static void intel_cpu_pll_init(struct drm_device *dev)
-{
-	if (HAS_DDI(dev))
-		intel_ddi_pll_init(dev);
-}
-
 static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
 				      struct intel_shared_dpll *pll,
 				      struct intel_dpll_hw_state *hw_state)
@@ -11379,7 +11383,9 @@ static void intel_shared_dpll_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
+	if (HAS_DDI(dev))
+		intel_ddi_pll_init(dev);
+	else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
 		ibx_pch_dpll_init(dev);
 	else
 		dev_priv->num_shared_dpll = 0;
@@ -12536,7 +12542,6 @@ void intel_modeset_init(struct drm_device *dev)
 	intel_init_dpio(dev);
 	intel_reset_dpio(dev);
 
-	intel_cpu_pll_init(dev);
 	intel_shared_dpll_init(dev);
 
 	/* Just disable it once at startup */