net: phy: micrel: add support for KSZ8795

This is adds support for the PHYs in the KSZ8795 5port managed switch.

It will allow to detect the link between the switch and the soc
and uses the same read_status functions as the KSZ8873MLL switch.

Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/micrel.c

@@ -1008,6 +1008,20 @@ static struct phy_driver ksphy_driver[] = {
 	.get_stats	= kszphy_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
+}, {
+	.phy_id		= PHY_ID_KSZ8795,
+	.phy_id_mask	= MICREL_PHY_ID_MASK,
+	.name		= "Micrel KSZ8795",
+	.features	= (SUPPORTED_Pause | SUPPORTED_Asym_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= ksz8873mll_config_aneg,
+	.read_status	= ksz8873mll_read_status,
+	.get_sset_count = kszphy_get_sset_count,
+	.get_strings	= kszphy_get_strings,
+	.get_stats	= kszphy_get_stats,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 } };
 
 module_phy_driver(ksphy_driver);

include/linux/micrel_phy.h

@@ -35,6 +35,8 @@
 #define PHY_ID_KSZ886X		0x00221430
 #define PHY_ID_KSZ8863		0x00221435
 
+#define PHY_ID_KSZ8795		0x00221550
+
 /* struct phy_device dev_flags definitions */
 #define MICREL_PHY_50MHZ_CLK	0x00000001
 #define MICREL_PHY_FXEN		0x00000002