ARM: mx3: dynamically allocate fsl-usb2-udc devices
While adapting the #defines for this I noticed that the offset used for USB HS on i.MX35 differs from the documented offset. I kept the working offset and commented that the documentation differs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This commit is contained in:
Uwe Kleine-König
Родитель
fed3d35b06
Коммит
9e1dde3387
|
|
@ -50,6 +50,7 @@ config MACH_MX31ADS_WM1133_EV1
|
|||
config MACH_PCM037
|
||||
bool "Support Phytec pcm037 (i.MX31) platforms"
|
||||
select SOC_IMX31
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_MMC
|
||||
|
|
@ -85,6 +86,7 @@ config MACH_MX31_3DS
|
|||
bool "Support MX31PDK (3DS)"
|
||||
select SOC_IMX31
|
||||
select MXC_DEBUG_BOARD
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
|
|
@ -104,6 +106,7 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
|
|||
config MACH_MX31MOBOARD
|
||||
bool "Support mx31moboard platforms (EPFL Mobots group)"
|
||||
select SOC_IMX31
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_MMC
|
||||
|
|
@ -135,6 +138,7 @@ config MACH_QONG
|
|||
config MACH_PCM043
|
||||
bool "Support Phytec pcm043 (i.MX35) platforms"
|
||||
select SOC_IMX35
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_SSI
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
|
|
@ -162,10 +166,10 @@ config MACH_MX35_3DS
|
|||
bool "Support MX35PDK platform"
|
||||
select SOC_IMX35
|
||||
select MXC_DEBUG_BOARD
|
||||
select IMX_HAVE_PLATFORM_ESDHC
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_ESDHC
|
||||
default n
|
||||
help
|
||||
Include support for MX35PDK platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
|
@ -181,6 +185,7 @@ config MACH_KZM_ARM11_01
|
|||
config MACH_EUKREA_CPUIMX35
|
||||
bool "Support Eukrea CPUIMX35 Platform"
|
||||
select SOC_IMX35
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
|
|
|
|||
|
|
@ -9,6 +9,10 @@
|
|||
#include <mach/mx31.h>
|
||||
#include <mach/devices-common.h>
|
||||
|
||||
extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst;
|
||||
#define imx31_add_fsl_usb2_udc(pdata) \
|
||||
imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
|
||||
|
||||
extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
|
||||
#define imx31_add_imx_i2c(id, pdata) \
|
||||
imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
|
||||
|
|
|
|||
|
|
@ -13,6 +13,10 @@ extern const struct imx_fec_data imx35_fec_data __initconst;
|
|||
#define imx35_add_fec(pdata) \
|
||||
imx_add_fec(&imx35_fec_data, pdata)
|
||||
|
||||
extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst;
|
||||
#define imx35_add_fsl_usb2_udc(pdata) \
|
||||
imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
|
||||
|
||||
extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst;
|
||||
#define imx35_add_flexcan(id, pdata) \
|
||||
imx_add_flexcan(&imx35_flexcan_data[id], pdata)
|
||||
|
|
|
|||
|
|
@ -97,30 +97,18 @@ struct platform_device mx3_camera = {
|
|||
|
||||
static struct resource otg_resources[] = {
|
||||
{
|
||||
.start = MX31_OTG_BASE_ADDR,
|
||||
.end = MX31_OTG_BASE_ADDR + 0x1ff,
|
||||
.start = MX31_USB_OTG_BASE_ADDR,
|
||||
.end = MX31_USB_OTG_BASE_ADDR + 0x1ff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.start = MX31_INT_USB3,
|
||||
.end = MX31_INT_USB3,
|
||||
.start = MX31_INT_USB_OTG,
|
||||
.end = MX31_INT_USB_OTG,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static u64 otg_dmamask = DMA_BIT_MASK(32);
|
||||
|
||||
/* OTG gadget device */
|
||||
struct platform_device mxc_otg_udc_device = {
|
||||
.name = "fsl-usb2-udc",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.dma_mask = &otg_dmamask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32),
|
||||
},
|
||||
.resource = otg_resources,
|
||||
.num_resources = ARRAY_SIZE(otg_resources),
|
||||
};
|
||||
|
||||
/* OTG host */
|
||||
struct platform_device mxc_otg_host = {
|
||||
.name = "mxc-ehci",
|
||||
|
|
@ -139,12 +127,12 @@ static u64 usbh1_dmamask = ~(u32)0;
|
|||
|
||||
static struct resource mxc_usbh1_resources[] = {
|
||||
{
|
||||
.start = MX31_OTG_BASE_ADDR + 0x200,
|
||||
.end = MX31_OTG_BASE_ADDR + 0x3ff,
|
||||
.start = MX31_USB_HS1_BASE_ADDR,
|
||||
.end = MX31_USB_HS1_BASE_ADDR + 0x1ff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.start = MX31_INT_USB1,
|
||||
.end = MX31_INT_USB1,
|
||||
.start = MX31_INT_USB_HS1,
|
||||
.end = MX31_INT_USB_HS1,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
|
@ -166,12 +154,12 @@ static u64 usbh2_dmamask = ~(u32)0;
|
|||
|
||||
static struct resource mxc_usbh2_resources[] = {
|
||||
{
|
||||
.start = MX31_OTG_BASE_ADDR + 0x400,
|
||||
.end = MX31_OTG_BASE_ADDR + 0x5ff,
|
||||
.start = MX31_USB_HS2_BASE_ADDR,
|
||||
.end = MX31_USB_HS2_BASE_ADDR + 0x1ff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.start = MX31_INT_USB2,
|
||||
.end = MX31_INT_USB2,
|
||||
.start = MX31_INT_USB_HS2,
|
||||
.end = MX31_INT_USB_HS2,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
|
@ -249,14 +237,14 @@ static int __init mx3_devices_init(void)
|
|||
#endif
|
||||
#if defined(CONFIG_ARCH_MX35)
|
||||
if (cpu_is_mx35()) {
|
||||
otg_resources[0].start = MX35_OTG_BASE_ADDR;
|
||||
otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
|
||||
otg_resources[1].start = MX35_INT_USBOTG;
|
||||
otg_resources[1].end = MX35_INT_USBOTG;
|
||||
mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
|
||||
mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
|
||||
mxc_usbh1_resources[1].start = MX35_INT_USBHS;
|
||||
mxc_usbh1_resources[1].end = MX35_INT_USBHS;
|
||||
otg_resources[0].start = MX35_USB_OTG_BASE_ADDR;
|
||||
otg_resources[0].end = MX35_USB_OTG_BASE_ADDR + 0x1ff;
|
||||
otg_resources[1].start = MX35_INT_USB_OTG;
|
||||
otg_resources[1].end = MX35_INT_USB_OTG;
|
||||
mxc_usbh1_resources[0].start = MX35_USB_HS_BASE_ADDR;
|
||||
mxc_usbh1_resources[0].end = MX35_USB_HS_BASE_ADDR + 0x1ff;
|
||||
mxc_usbh1_resources[1].start = MX35_INT_USB_HS;
|
||||
mxc_usbh1_resources[1].end = MX35_INT_USB_HS;
|
||||
imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
|
||||
imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,7 +1,6 @@
|
|||
extern struct platform_device mx3_ipu;
|
||||
extern struct platform_device mx3_fb;
|
||||
extern struct platform_device mx3_camera;
|
||||
extern struct platform_device mxc_otg_udc_device;
|
||||
extern struct platform_device mxc_otg_host;
|
||||
extern struct platform_device mxc_usbh1;
|
||||
extern struct platform_device mxc_usbh2;
|
||||
|
|
|
|||
|
|
@ -30,7 +30,6 @@
|
|||
#include <linux/i2c/tsc2007.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/ulpi.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
|
|
@ -128,7 +127,7 @@ static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
|
|||
MXC_EHCI_IPPUE_DOWN,
|
||||
};
|
||||
|
||||
static struct fsl_usb2_platform_data otg_device_pdata = {
|
||||
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_UTMI,
|
||||
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
|
||||
|
|
@ -170,7 +169,7 @@ static void __init mxc_board_init(void)
|
|||
if (otg_mode_host)
|
||||
mxc_register_device(&mxc_otg_host, &otg_pdata);
|
||||
else
|
||||
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
|
||||
imx35_add_fsl_usb2_udc(&otg_device_pdata);
|
||||
|
||||
mxc_register_device(&mxc_usbh1, &usbh1_pdata);
|
||||
|
||||
|
|
|
|||
|
|
@ -22,7 +22,6 @@
|
|||
#include <linux/mfd/mc13783.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
#include <linux/input/matrix_keypad.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
|
|
@ -214,7 +213,7 @@ usbotg_free_reset:
|
|||
return err;
|
||||
}
|
||||
|
||||
static struct fsl_usb2_platform_data usbotg_pdata = {
|
||||
static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_ULPI,
|
||||
};
|
||||
|
|
@ -249,7 +248,7 @@ static void __init mxc_board_init(void)
|
|||
mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data);
|
||||
|
||||
mx31_3ds_usbotg_init();
|
||||
mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
|
||||
imx31_add_fsl_usb2_udc(&usbotg_pdata);
|
||||
|
||||
if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
|
||||
printk(KERN_WARNING "Init of the debug board failed, all "
|
||||
|
|
|
|||
|
|
@ -26,7 +26,6 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/memory.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
|
||||
#include <linux/mtd/physmap.h>
|
||||
|
||||
|
|
@ -122,7 +121,7 @@ static struct pad_desc mx35pdk_pads[] = {
|
|||
};
|
||||
|
||||
/* OTG config */
|
||||
static struct fsl_usb2_platform_data usb_otg_pdata = {
|
||||
static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
|
||||
};
|
||||
|
|
@ -146,7 +145,7 @@ static void __init mxc_board_init(void)
|
|||
|
||||
imx35_add_imx_uart0(&uart_pdata);
|
||||
|
||||
mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata);
|
||||
imx35_add_fsl_usb2_udc(&usb_otg_pdata);
|
||||
|
||||
mxc_register_device(&mxc_usbh1, &usb_host_pdata);
|
||||
|
||||
|
|
|
|||
|
|
@ -27,7 +27,6 @@
|
|||
#include <linux/delay.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
#include <linux/can/platform/sja1000.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/ulpi.h>
|
||||
|
|
@ -550,7 +549,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
|
|||
};
|
||||
#endif
|
||||
|
||||
static struct fsl_usb2_platform_data otg_device_pdata = {
|
||||
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_ULPI,
|
||||
};
|
||||
|
|
@ -664,7 +663,7 @@ static void __init mxc_board_init(void)
|
|||
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
|
||||
#endif
|
||||
if (!otg_mode_host)
|
||||
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
|
||||
imx31_add_fsl_usb2_udc(&otg_device_pdata);
|
||||
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -27,7 +27,6 @@
|
|||
#include <linux/i2c/at24.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/ulpi.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
|
|
@ -323,7 +322,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = {
|
|||
};
|
||||
#endif
|
||||
|
||||
static struct fsl_usb2_platform_data otg_device_pdata = {
|
||||
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_UTMI,
|
||||
};
|
||||
|
|
@ -392,7 +391,7 @@ static void __init mxc_board_init(void)
|
|||
mxc_register_device(&mxc_usbh1, &usbh1_pdata);
|
||||
#endif
|
||||
if (!otg_mode_host)
|
||||
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
|
||||
imx35_add_fsl_usb2_udc(&otg_device_pdata);
|
||||
|
||||
imx35_add_flexcan1(NULL);
|
||||
imx35_add_esdhc(0, NULL);
|
||||
|
|
|
|||
|
|
@ -18,7 +18,6 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
|
||||
#include <linux/usb/otg.h>
|
||||
|
||||
|
|
@ -210,7 +209,7 @@ static int __init devboard_usbh1_init(void)
|
|||
}
|
||||
|
||||
|
||||
static struct fsl_usb2_platform_data usb_pdata = {
|
||||
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_ULPI,
|
||||
};
|
||||
|
|
@ -231,7 +230,7 @@ void __init mx31moboard_devboard_init(void)
|
|||
|
||||
devboard_init_sel_gpios();
|
||||
|
||||
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
|
||||
imx31_add_fsl_usb2_udc(&usb_pdata);
|
||||
|
||||
devboard_usbh1_init();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -21,7 +21,6 @@
|
|||
#include <linux/slab.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
|
||||
#include <linux/usb/otg.h>
|
||||
|
||||
|
|
@ -326,7 +325,7 @@ static int __init marxbot_usbh1_init(void)
|
|||
return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
|
||||
}
|
||||
|
||||
static struct fsl_usb2_platform_data usb_pdata = {
|
||||
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_ULPI,
|
||||
};
|
||||
|
|
@ -358,7 +357,7 @@ void __init mx31moboard_marxbot_init(void)
|
|||
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
|
||||
gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
|
||||
|
||||
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
|
||||
imx31_add_fsl_usb2_udc(&usb_pdata);
|
||||
|
||||
marxbot_usbh1_init();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@
|
|||
#include <linux/i2c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/fsl_devices.h>
|
||||
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/ulpi.h>
|
||||
|
|
@ -119,7 +118,7 @@ static int __init smartbot_cam_init(void)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static struct fsl_usb2_platform_data usb_pdata = {
|
||||
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
|
||||
.operating_mode = FSL_USB2_DR_DEVICE,
|
||||
.phy_mode = FSL_USB2_PHY_ULPI,
|
||||
};
|
||||
|
|
@ -183,7 +182,7 @@ void __init mx31moboard_smartbot_init(int board)
|
|||
|
||||
switch (board) {
|
||||
case MX31SMARTBOT:
|
||||
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
|
||||
imx31_add_fsl_usb2_udc(&usb_pdata);
|
||||
break;
|
||||
case MX31EYEBOT:
|
||||
smartbot_otg_host_init();
|
||||
|
|
|
|||
|
|
@ -25,6 +25,16 @@ const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
|
|||
imx_fsl_usb2_udc_data_entry_single(MX27);
|
||||
#endif /* ifdef CONFIG_SOC_IMX27 */
|
||||
|
||||
#ifdef CONFIG_SOC_IMX31
|
||||
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
|
||||
imx_fsl_usb2_udc_data_entry_single(MX31);
|
||||
#endif /* ifdef CONFIG_SOC_IMX31 */
|
||||
|
||||
#ifdef CONFIG_SOC_IMX35
|
||||
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
|
||||
imx_fsl_usb2_udc_data_entry_single(MX35);
|
||||
#endif /* ifdef CONFIG_SOC_IMX35 */
|
||||
|
||||
struct platform_device *__init imx_add_fsl_usb2_udc(
|
||||
const struct imx_fsl_usb2_udc_data *data,
|
||||
const struct fsl_usb2_platform_data *pdata)
|
||||
|
|
|
|||
|
|
@ -24,7 +24,10 @@
|
|||
#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000)
|
||||
#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
|
||||
#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000)
|
||||
#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
|
||||
#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
|
||||
#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000)
|
||||
#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200)
|
||||
#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400)
|
||||
#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000)
|
||||
#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000)
|
||||
#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000)
|
||||
|
|
@ -161,10 +164,9 @@ static inline void mx31_setup_weimcs(size_t cs,
|
|||
#define MX31_INT_UART2 32
|
||||
#define MX31_INT_NFC 33
|
||||
#define MX31_INT_SDMA 34
|
||||
#define MX31_INT_USB1 35
|
||||
#define MX31_INT_USB2 36
|
||||
#define MX31_INT_USB3 37
|
||||
#define MX31_INT_USB4 38
|
||||
#define MX31_INT_USB_HS1 35
|
||||
#define MX31_INT_USB_HS2 36
|
||||
#define MX31_INT_USB_OTG 37
|
||||
#define MX31_INT_MSHC1 39
|
||||
#define MX31_INT_MSHC2 40
|
||||
#define MX31_INT_IPU_ERR 41
|
||||
|
|
|
|||
|
|
@ -65,8 +65,14 @@
|
|||
#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000)
|
||||
#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
|
||||
#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000)
|
||||
|
||||
#define MX35_OTG_BASE_ADDR 0x53ff4000
|
||||
#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000)
|
||||
#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000)
|
||||
/*
|
||||
* The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
|
||||
* HS. When host support was implemented only a preliminary document was
|
||||
* available, which told 0x400. This works fine.
|
||||
*/
|
||||
#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400)
|
||||
|
||||
#define MX35_ROMP_BASE_ADDR 0x60000000
|
||||
#define MX35_ROMP_SIZE SZ_1M
|
||||
|
|
@ -143,8 +149,8 @@
|
|||
#define MX35_INT_UART2 32
|
||||
#define MX35_INT_NFC 33
|
||||
#define MX35_INT_SDMA 34
|
||||
#define MX35_INT_USBHS 35
|
||||
#define MX35_INT_USBOTG 37
|
||||
#define MX35_INT_USB_HS 35
|
||||
#define MX35_INT_USB_OTG 37
|
||||
#define MX35_INT_MSHC1 39
|
||||
#define MX35_INT_ESAI 40
|
||||
#define MX35_INT_IPU_ERR 41
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче