diff --git a/MAINTAINERS b/MAINTAINERS index efb08d70cc28..a48d24d50753 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1295,11 +1295,6 @@ F: arch/arm/mach-aspeed/ F: arch/arm/boot/dts/aspeed-* N: aspeed -ARM/ATMEL AT91 Clock Support -M: Boris Brezillon -S: Maintained -F: drivers/clk/at91 - ARM/CALXEDA HIGHBANK ARCHITECTURE M: Rob Herring L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1481,6 +1476,16 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git F: arch/arm/mach-imx/*vf610* F: arch/arm/boot/dts/vf* +ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE +M: Shawn Guo +M: Li Yang +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git +F: arch/arm/boot/dts/ls1021a* +F: arch/arm64/boot/dts/freescale/fsl-* +F: arch/arm64/boot/dts/freescale/qoriq-* + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -10571,6 +10576,7 @@ F: arch/arm/plat-omap/ F: arch/arm/configs/omap1_defconfig F: drivers/i2c/busses/i2c-omap.c F: include/linux/platform_data/i2c-omap.h +F: include/linux/platform_data/ams-delta-fiq.h OMAP2+ SUPPORT M: Tony Lindgren diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f69613fd4e68..e8cd55a5b04c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -603,13 +603,16 @@ config ARCH_S3C24XX config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL - select CLKDEV_LOOKUP + select COMMON_CLK select CPU_ARM926T select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select GPIOLIB select HAVE_IDE + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM && OF + select RESET_CONTROLLER select USE_OF select ZONE_DMA help diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index b48dc083d1b1..f6fcb8a79889 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -204,6 +204,14 @@ choice depends on ARCH_BCM_HR2 select DEBUG_UART_8250 + config DEBUG_BCM_IPROC_UART3 + bool "Kernel low-level debugging on BCM IPROC UART3" + depends on ARCH_BCM_CYGNUS + select DEBUG_UART_8250 + help + Say Y here if you want the debug print routines to direct + their output to the third serial port on these devices. + config DEBUG_BCM_KONA_UART bool "Kernel low-level debugging messages via BCM KONA UART" depends on ARCH_BCM_MOBILE @@ -1562,14 +1570,15 @@ config DEBUG_UART_PHYS default 0x18000400 if DEBUG_BCM_HR2 default 0x18010000 if DEBUG_SIRFATLAS7_UART0 default 0x18020000 if DEBUG_SIRFATLAS7_UART1 + default 0x18023000 if DEBUG_BCM_IPROC_UART3 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 default 0x20001000 if DEBUG_HIP01_UART default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 - default 0x3f201000 if DEBUG_BCM2836 default 0x3e000000 if DEBUG_BCM_KONA_UART + default 0x3f201000 if DEBUG_BCM2836 default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40028000 if DEBUG_AT91_SAMV7_USART1 default 0x40081000 if DEBUG_LPC18XX_UART0 @@ -1682,6 +1691,7 @@ config DEBUG_UART_VIRT default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf1009000 if DEBUG_MT8135_UART3 + default 0xf1023000 if DEBUG_BCM_IPROC_UART3 default 0xf11f1000 if DEBUG_VERSATILE default 0xf1600000 if DEBUG_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 @@ -1797,7 +1807,7 @@ config DEBUG_UART_8250_WORD DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \ DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ - DEBUG_DAVINCI_DA8XX_UART2 || \ + DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 config DEBUG_UART_8250_PALMCHIP diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e7d703d8fac3..ed94cf7e3157 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -219,7 +219,6 @@ machine-$(CONFIG_ARCH_TANGO) += tango machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 -machine-$(CONFIG_ARCH_UNIPHIER) += uniphier machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress machine-$(CONFIG_ARCH_VT8500) += vt8500 diff --git a/arch/arm/firmware/trusted_foundations.c b/arch/arm/firmware/trusted_foundations.c index 3fb1b5a1dce9..689e6565abfc 100644 --- a/arch/arm/firmware/trusted_foundations.c +++ b/arch/arm/firmware/trusted_foundations.c @@ -31,21 +31,25 @@ static unsigned long cpu_boot_addr; -static void __naked tf_generic_smc(u32 type, u32 arg1, u32 arg2) +static void tf_generic_smc(u32 type, u32 arg1, u32 arg2) { + register u32 r0 asm("r0") = type; + register u32 r1 asm("r1") = arg1; + register u32 r2 asm("r2") = arg2; + asm volatile( ".arch_extension sec\n\t" - "stmfd sp!, {r4 - r11, lr}\n\t" + "stmfd sp!, {r4 - r11}\n\t" __asmeq("%0", "r0") __asmeq("%1", "r1") __asmeq("%2", "r2") "mov r3, #0\n\t" "mov r4, #0\n\t" "smc #0\n\t" - "ldmfd sp!, {r4 - r11, pc}" + "ldmfd sp!, {r4 - r11}\n\t" : - : "r" (type), "r" (arg1), "r" (arg2) - : "memory"); + : "r" (r0), "r" (r1), "r" (r2) + : "memory", "r3", "r12", "lr"); } static int tf_set_cpu_boot_addr(int cpu, unsigned long boot_addr) diff --git a/arch/arm/include/debug/renesas-scif.S b/arch/arm/include/debug/renesas-scif.S index 97820a8df51a..1c5f795587fc 100644 --- a/arch/arm/include/debug/renesas-scif.S +++ b/arch/arm/include/debug/renesas-scif.S @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Renesas SCIF(A) debugging macro include header * @@ -5,10 +6,6 @@ * * Copyright (C) 2012-2013 Renesas Electronics Corporation * Copyright (C) 1994-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define SCIF_PHYS CONFIG_DEBUG_UART_PHYS diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 849014c01cf4..e8f3d0f97e61 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -40,15 +40,16 @@ extern void at91_pinctrl_gpio_resume(void); #endif static const match_table_t pm_modes __initconst = { - { 0, "standby" }, - { AT91_PM_SLOW_CLOCK, "ulp0" }, + { AT91_PM_STANDBY, "standby" }, + { AT91_PM_ULP0, "ulp0" }, + { AT91_PM_ULP1, "ulp1" }, { AT91_PM_BACKUP, "backup" }, { -1, NULL }, }; static struct at91_pm_data pm_data = { - .standby_mode = 0, - .suspend_mode = AT91_PM_SLOW_CLOCK, + .standby_mode = AT91_PM_STANDBY, + .suspend_mode = AT91_PM_ULP0, }; #define at91_ramc_read(id, field) \ @@ -79,6 +80,90 @@ static struct at91_pm_bu { phys_addr_t resume; } *pm_bu; +struct wakeup_source_info { + unsigned int pmc_fsmr_bit; + unsigned int shdwc_mr_bit; + bool set_polarity; +}; + +static const struct wakeup_source_info ws_info[] = { + { .pmc_fsmr_bit = AT91_PMC_FSTT(10), .set_polarity = true }, + { .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) }, + { .pmc_fsmr_bit = AT91_PMC_USBAL }, + { .pmc_fsmr_bit = AT91_PMC_SDMMC_CD }, +}; + +static const struct of_device_id sama5d2_ws_ids[] = { + { .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] }, + { .compatible = "atmel,at91rm9200-rtc", .data = &ws_info[1] }, + { .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] }, + { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] }, + { .compatible = "usb-ohci", .data = &ws_info[2] }, + { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] }, + { .compatible = "usb-ehci", .data = &ws_info[2] }, + { .compatible = "atmel,sama5d2-sdhci", .data = &ws_info[3] }, + { /* sentinel */ } +}; + +static int at91_pm_config_ws(unsigned int pm_mode, bool set) +{ + const struct wakeup_source_info *wsi; + const struct of_device_id *match; + struct platform_device *pdev; + struct device_node *np; + unsigned int mode = 0, polarity = 0, val = 0; + + if (pm_mode != AT91_PM_ULP1) + return 0; + + if (!pm_data.pmc || !pm_data.shdwc) + return -EPERM; + + if (!set) { + writel(mode, pm_data.pmc + AT91_PMC_FSMR); + return 0; + } + + /* SHDWC.WUIR */ + val = readl(pm_data.shdwc + 0x0c); + mode |= (val & 0x3ff); + polarity |= ((val >> 16) & 0x3ff); + + /* SHDWC.MR */ + val = readl(pm_data.shdwc + 0x04); + + /* Loop through defined wakeup sources. */ + for_each_matching_node_and_match(np, sama5d2_ws_ids, &match) { + pdev = of_find_device_by_node(np); + if (!pdev) + continue; + + if (device_may_wakeup(&pdev->dev)) { + wsi = match->data; + + /* Check if enabled on SHDWC. */ + if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit)) + goto put_node; + + mode |= wsi->pmc_fsmr_bit; + if (wsi->set_polarity) + polarity |= wsi->pmc_fsmr_bit; + } + +put_node: + of_node_put(np); + } + + if (mode) { + writel(mode, pm_data.pmc + AT91_PMC_FSMR); + writel(polarity, pm_data.pmc + AT91_PMC_FSPR); + } else { + pr_err("AT91: PM: no ULP1 wakeup sources found!"); + } + + return mode ? 0 : -EPERM; +} + /* * Called after processes are frozen, but before we shutdown devices. */ @@ -97,7 +182,7 @@ static int at91_pm_begin(suspend_state_t state) pm_data.mode = -1; } - return 0; + return at91_pm_config_ws(pm_data.mode, true); } /* @@ -145,7 +230,7 @@ static int at91_pm_verify_clocks(void) */ int at91_suspend_entering_slow_clock(void) { - return (pm_data.mode >= AT91_PM_SLOW_CLOCK); + return (pm_data.mode >= AT91_PM_ULP0); } EXPORT_SYMBOL(at91_suspend_entering_slow_clock); @@ -186,7 +271,7 @@ static void at91_pm_suspend(suspend_state_t state) * event sources; and reduces DRAM power. But otherwise it's identical to * PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks. * - * AT91_PM_SLOW_CLOCK is like STANDBY plus slow clock mode, so drivers must + * AT91_PM_ULP0 is like STANDBY plus slow clock mode, so drivers must * suspend more deeply, the master clock switches to the clk32k and turns off * the main oscillator * @@ -204,7 +289,7 @@ static int at91_pm_enter(suspend_state_t state) /* * Ensure that clocks are in a valid state. */ - if ((pm_data.mode >= AT91_PM_SLOW_CLOCK) && + if (pm_data.mode >= AT91_PM_ULP0 && !at91_pm_verify_clocks()) goto error; @@ -233,6 +318,7 @@ error: */ static void at91_pm_end(void) { + at91_pm_config_ws(pm_data.mode, false); } @@ -478,31 +564,28 @@ static void __init at91_pm_sram_init(void) &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz); } -static void __init at91_pm_backup_init(void) +static bool __init at91_is_pm_mode_active(int pm_mode) +{ + return (pm_data.standby_mode == pm_mode || + pm_data.suspend_mode == pm_mode); +} + +static int __init at91_pm_backup_init(void) { struct gen_pool *sram_pool; struct device_node *np; struct platform_device *pdev = NULL; + int ret = -ENODEV; - if ((pm_data.standby_mode != AT91_PM_BACKUP) && - (pm_data.suspend_mode != AT91_PM_BACKUP)) - return; + if (!at91_is_pm_mode_active(AT91_PM_BACKUP)) + return 0; pm_bu = NULL; - np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc"); - if (!np) { - pr_warn("%s: failed to find shdwc!\n", __func__); - return; - } - - pm_data.shdwc = of_iomap(np, 0); - of_node_put(np); - np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu"); if (!np) { pr_warn("%s: failed to find sfrbu!\n", __func__); - goto sfrbu_fail; + return ret; } pm_data.sfrbu = of_iomap(np, 0); @@ -529,6 +612,7 @@ static void __init at91_pm_backup_init(void) pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu)); if (!pm_bu) { pr_warn("%s: unable to alloc securam!\n", __func__); + ret = -ENOMEM; goto securam_fail; } @@ -536,19 +620,60 @@ static void __init at91_pm_backup_init(void) pm_bu->canary = __pa_symbol(&canary); pm_bu->resume = __pa_symbol(cpu_resume); - return; + return 0; -sfrbu_fail: - iounmap(pm_data.shdwc); - pm_data.shdwc = NULL; securam_fail: iounmap(pm_data.sfrbu); pm_data.sfrbu = NULL; + return ret; +} - if (pm_data.standby_mode == AT91_PM_BACKUP) - pm_data.standby_mode = AT91_PM_SLOW_CLOCK; - if (pm_data.suspend_mode == AT91_PM_BACKUP) - pm_data.suspend_mode = AT91_PM_SLOW_CLOCK; +static void __init at91_pm_use_default_mode(int pm_mode) +{ + if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP) + return; + + if (pm_data.standby_mode == pm_mode) + pm_data.standby_mode = AT91_PM_ULP0; + if (pm_data.suspend_mode == pm_mode) + pm_data.suspend_mode = AT91_PM_ULP0; +} + +static void __init at91_pm_modes_init(void) +{ + struct device_node *np; + int ret; + + if (!at91_is_pm_mode_active(AT91_PM_BACKUP) && + !at91_is_pm_mode_active(AT91_PM_ULP1)) + return; + + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-shdwc"); + if (!np) { + pr_warn("%s: failed to find shdwc!\n", __func__); + goto ulp1_default; + } + + pm_data.shdwc = of_iomap(np, 0); + of_node_put(np); + + ret = at91_pm_backup_init(); + if (ret) { + if (!at91_is_pm_mode_active(AT91_PM_ULP1)) + goto unmap; + else + goto backup_default; + } + + return; + +unmap: + iounmap(pm_data.shdwc); + pm_data.shdwc = NULL; +ulp1_default: + at91_pm_use_default_mode(AT91_PM_ULP1); +backup_default: + at91_pm_use_default_mode(AT91_PM_BACKUP); } struct pmc_info { @@ -644,7 +769,7 @@ void __init sama5d2_pm_init(void) if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) return; - at91_pm_backup_init(); + at91_pm_modes_init(); sama5_pm_init(); } diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index f95d31496f08..9bd4e6ca672a 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -21,8 +21,10 @@ #define AT91_MEMCTRL_SDRAMC 1 #define AT91_MEMCTRL_DDRSDR 2 -#define AT91_PM_SLOW_CLOCK 0x01 -#define AT91_PM_BACKUP 0x02 +#define AT91_PM_STANDBY 0x00 +#define AT91_PM_ULP0 0x01 +#define AT91_PM_ULP1 0x02 +#define AT91_PM_BACKUP 0x03 #ifndef __ASSEMBLY__ struct at91_pm_data { diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index daca91feea6a..a7c6ae13c945 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -41,6 +41,15 @@ tmp2 .req r5 beq 1b .endm +/* + * Wait for main oscillator selection is done + */ + .macro wait_moscsels +1: ldr tmp1, [pmc, #AT91_PMC_SR] + tst tmp1, #AT91_PMC_MOSCSELS + beq 1b + .endm + /* * Wait until PLLA has locked. */ @@ -112,19 +121,20 @@ ENTRY(at91_pm_suspend_in_sram) bl at91_sramc_self_refresh ldr r0, .pm_mode - cmp r0, #AT91_PM_SLOW_CLOCK - beq slow_clock + cmp r0, #AT91_PM_STANDBY + beq standby cmp r0, #AT91_PM_BACKUP beq backup_mode + bl at91_ulp_mode + b exit_suspend + +standby: /* Wait for interrupt */ ldr pmc, .pmc_base at91_cpu_idle b exit_suspend -slow_clock: - bl at91_slowck_mode - b exit_suspend backup_mode: bl at91_backup_mode b exit_suspend @@ -151,7 +161,102 @@ ENTRY(at91_backup_mode) str tmp1, [r0, #0] ENDPROC(at91_backup_mode) -ENTRY(at91_slowck_mode) +.macro at91_pm_ulp0_mode + ldr pmc, .pmc_base + + /* Turn off the crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + /* Wait for interrupt */ + at91_cpu_idle + + /* Turn on the crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscrdy +.endm + +/** + * Note: This procedure only applies on the platform which uses + * the external crystal oscillator as a main clock source. + */ +.macro at91_pm_ulp1_mode + ldr pmc, .pmc_base + + /* Switch the main clock source to 12-MHz RC oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCSEL + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscsels + + /* Disable the crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + bic tmp1, tmp1, #AT91_PMC_MOSCEN + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + /* Switch the master clock source to main clock */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + bic tmp1, tmp1, #AT91_PMC_CSS + orr tmp1, tmp1, #AT91_PMC_CSS_MAIN + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + + /* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_WAITMODE + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_mckrdy + + /* Enable the crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCEN + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscrdy + + /* Switch the master clock source to slow clock */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + + /* Switch main clock source to crystal oscillator */ + ldr tmp1, [pmc, #AT91_CKGR_MOR] + orr tmp1, tmp1, #AT91_PMC_MOSCSEL + bic tmp1, tmp1, #AT91_PMC_KEY_MASK + orr tmp1, tmp1, #AT91_PMC_KEY + str tmp1, [pmc, #AT91_CKGR_MOR] + + wait_moscsels + + /* Switch the master clock source to main clock */ + ldr tmp1, [pmc, #AT91_PMC_MCKR] + bic tmp1, tmp1, #AT91_PMC_CSS + orr tmp1, tmp1, #AT91_PMC_CSS_MAIN + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy +.endm + +ENTRY(at91_ulp_mode) ldr pmc, .pmc_base /* Save Master clock setting */ @@ -174,22 +279,19 @@ ENTRY(at91_slowck_mode) orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ str tmp1, [pmc, #AT91_CKGR_PLLAR] - /* Turn off the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - bic tmp1, tmp1, #AT91_PMC_MOSCEN - orr tmp1, tmp1, #AT91_PMC_KEY - str tmp1, [pmc, #AT91_CKGR_MOR] + ldr r0, .pm_mode + cmp r0, #AT91_PM_ULP1 + beq ulp1_mode - /* Wait for interrupt */ - at91_cpu_idle + at91_pm_ulp0_mode + b ulp_exit - /* Turn on the main oscillator */ - ldr tmp1, [pmc, #AT91_CKGR_MOR] - orr tmp1, tmp1, #AT91_PMC_MOSCEN - orr tmp1, tmp1, #AT91_PMC_KEY - str tmp1, [pmc, #AT91_CKGR_MOR] +ulp1_mode: + at91_pm_ulp1_mode + b ulp_exit - wait_moscrdy +ulp_exit: + ldr pmc, .pmc_base /* Restore PLLA setting */ ldr tmp1, .saved_pllar @@ -212,7 +314,7 @@ ENTRY(at91_slowck_mode) wait_mckrdy mov pc, lr -ENDPROC(at91_slowck_mode) +ENDPROC(at91_ulp_mode) /* * void at91_sramc_self_refresh(unsigned int is_active) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 05c3eecf47cb..da8a039d65f9 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -59,6 +59,7 @@ config MACH_DA8XX_DT default y depends on ARCH_DAVINCI_DA850 select PINCTRL + select TIMER_OF help Say y here to include support for TI DaVinci DA850 based using Flattened Device Tree. More information at Documentation/devicetree @@ -231,18 +232,6 @@ config DAVINCI_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect DAVINCI_MUX for your product. -config DAVINCI_RESET_CLOCKS - bool "Reset unused clocks during boot" - depends on ARCH_DAVINCI - help - Say Y if you want to reset unused clocks during boot. - This option saves power, but assumes all drivers are - using the clock framework. Broken drivers that do not - yet use clock framework may not work with this option. - If you are booting from another operating system, you - probably do not want this option enabled until your - device drivers work properly. - endmenu endif diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 4e8178050027..93d271b4d84b 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,8 +5,8 @@ # # Common objects -obj-y := time.o clock.o serial.o psc.o \ - usb.o common.o sram.o aemif.o +obj-y := time.o serial.o usb.o \ + common.o sram.o obj-$(CONFIG_DAVINCI_MUX) += mux.o diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c deleted file mode 100644 index e4ab3f3a2a1f..000000000000 --- a/arch/arm/mach-davinci/aemif.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * AEMIF support for DaVinci SoCs - * - * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -/* Timing value configuration */ - -#define TA(x) ((x) << 2) -#define RHOLD(x) ((x) << 4) -#define RSTROBE(x) ((x) << 7) -#define RSETUP(x) ((x) << 13) -#define WHOLD(x) ((x) << 17) -#define WSTROBE(x) ((x) << 20) -#define WSETUP(x) ((x) << 26) - -#define TA_MAX 0x3 -#define RHOLD_MAX 0x7 -#define RSTROBE_MAX 0x3f -#define RSETUP_MAX 0xf -#define WHOLD_MAX 0x7 -#define WSTROBE_MAX 0x3f -#define WSETUP_MAX 0xf - -#define TIMING_MASK (TA(TA_MAX) | \ - RHOLD(RHOLD_MAX) | \ - RSTROBE(RSTROBE_MAX) | \ - RSETUP(RSETUP_MAX) | \ - WHOLD(WHOLD_MAX) | \ - WSTROBE(WSTROBE_MAX) | \ - WSETUP(WSETUP_MAX)) - -static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset) -{ - return readl_relaxed(base + offset); -} - -static inline void davinci_aemif_writel(void __iomem *base, - int offset, unsigned long value) -{ - writel_relaxed(value, base + offset); -} - -/* - * aemif_calc_rate - calculate timing data. - * @wanted: The cycle time needed in nanoseconds. - * @clk: The input clock rate in kHz. - * @max: The maximum divider value that can be programmed. - * - * On success, returns the calculated timing value minus 1 for easy - * programming into AEMIF timing registers, else negative errno. - */ -static int aemif_calc_rate(int wanted, unsigned long clk, int max) -{ - int result; - - result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1; - - pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted); - - /* It is generally OK to have a more relaxed timing than requested... */ - if (result < 0) - result = 0; - - /* ... But configuring tighter timings is not an option. */ - else if (result > max) - result = -EINVAL; - - return result; -} - -/** - * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface - * @t: timing values to be progammed - * @base: The virtual base address of the AEMIF interface - * @cs: chip-select to program the timing values for - * @clkrate: the AEMIF clkrate - * - * This function programs the given timing values (in real clock) into the - * AEMIF registers taking the AEMIF clock into account. - * - * This function does not use any locking while programming the AEMIF - * because it is expected that there is only one user of a given - * chip-select. - * - * Returns 0 on success, else negative errno. - */ -static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, - void __iomem *base, unsigned cs, - unsigned long clkrate) -{ - unsigned set, val; - int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup; - unsigned offset = A1CR_OFFSET + cs * 4; - - if (!t) - return 0; /* Nothing to do */ - - clkrate /= 1000; /* turn clock into kHz for ease of use */ - - ta = aemif_calc_rate(t->ta, clkrate, TA_MAX); - rhold = aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX); - rstrobe = aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX); - rsetup = aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX); - whold = aemif_calc_rate(t->whold, clkrate, WHOLD_MAX); - wstrobe = aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX); - wsetup = aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX); - - if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 || - whold < 0 || wstrobe < 0 || wsetup < 0) { - pr_err("%s: cannot get suitable timings\n", __func__); - return -EINVAL; - } - - set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) | - WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup); - - val = __raw_readl(base + offset); - val &= ~TIMING_MASK; - val |= set; - __raw_writel(val, base + offset); - - return 0; -} - -/** - * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata - * @pdev - link to platform device to setup settings for - * - * This function does not use any locking while programming the AEMIF - * because it is expected that there is only one user of a given - * chip-select. - * - * Returns 0 on success, else negative errno. - */ -int davinci_aemif_setup(struct platform_device *pdev) -{ - struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev); - uint32_t val; - unsigned long clkrate; - struct resource *res; - void __iomem *base; - struct clk *clk; - int ret = 0; - - clk = clk_get(&pdev->dev, "aemif"); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); - return ret; - } - - ret = clk_prepare_enable(clk); - if (ret < 0) { - dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", - ret); - goto err_put; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n"); - ret = -ENOMEM; - goto err; - } - - base = ioremap(res->start, resource_size(res)); - if (!base) { - dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res); - ret = -ENOMEM; - goto err; - } - - /* - * Setup Async configuration register in case we did not boot - * from NAND and so bootloader did not bother to set it up. - */ - val = davinci_aemif_readl(base, A1CR_OFFSET + pdata->core_chipsel * 4); - /* - * Extended Wait is not valid and Select Strobe mode is not - * used - */ - val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK); - if (pdata->options & NAND_BUSWIDTH_16) - val |= 0x1; - - davinci_aemif_writel(base, A1CR_OFFSET + pdata->core_chipsel * 4, val); - - clkrate = clk_get_rate(clk); - - if (pdata->timing) - ret = davinci_aemif_setup_timing(pdata->timing, base, - pdata->core_chipsel, clkrate); - - if (ret < 0) - dev_dbg(&pdev->dev, "NAND timing values setup fail\n"); - - iounmap(base); -err: - clk_disable_unprepare(clk); -err_put: - clk_put(clk); - return ret; -} diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 14a6fc061744..7d8ab36ff83d 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -110,15 +111,9 @@ static __init void da830_evm_usb_init(void) { int ret; - /* USB_REFCLKIN is not used. */ - ret = da8xx_register_usb20_phy_clk(false); + ret = da8xx_register_usb_phy_clocks(); if (ret) - pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n", - __func__, ret); - - ret = da8xx_register_usb11_phy_clk(false); - if (ret) - pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", + pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); ret = da8xx_register_usb_phy(); @@ -339,14 +334,48 @@ static struct resource da830_evm_nand_resources[] = { }, }; -static struct platform_device da830_evm_nand_device = { - .name = "davinci_nand", - .id = 1, - .dev = { - .platform_data = &da830_evm_nand_pdata, +static struct platform_device da830_evm_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 1, + .dev = { + .platform_data = &da830_evm_nand_pdata, + }, + .num_resources = ARRAY_SIZE(da830_evm_nand_resources), + .resource = da830_evm_nand_resources, }, - .num_resources = ARRAY_SIZE(da830_evm_nand_resources), - .resource = da830_evm_nand_resources, +}; + +static struct resource da830_evm_aemif_resource[] = { + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct aemif_abus_data da830_evm_aemif_abus_data[] = { + { + .cs = 3, + }, +}; + +static struct aemif_platform_data da830_evm_aemif_pdata = { + .abus_data = da830_evm_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(da830_evm_aemif_abus_data), + .sub_devices = da830_evm_aemif_devices, + .num_sub_devices = ARRAY_SIZE(da830_evm_aemif_devices), + .cs_offset = 2, +}; + +static struct platform_device da830_evm_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &da830_evm_aemif_pdata, + }, + .resource = da830_evm_aemif_resource, + .num_resources = ARRAY_SIZE(da830_evm_aemif_resource), }; /* @@ -377,12 +406,9 @@ static inline void da830_evm_init_nand(int mux_mode) if (ret) pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret); - ret = platform_device_register(&da830_evm_nand_device); + ret = platform_device_register(&da830_evm_aemif_device); if (ret) - pr_warn("%s: NAND device not registered\n", __func__); - - if (davinci_aemif_setup(&da830_evm_nand_device)) - pr_warn("%s: Cannot configure AEMIF\n", __func__); + pr_warn("%s: AEMIF device not registered\n", __func__); gpio_direction_output(mux_mode, 1); } @@ -557,6 +583,8 @@ static __init void da830_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; + da830_register_clocks(); + ret = da830_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6d5beb11bd96..e1a949b47306 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -185,16 +186,6 @@ static struct resource da850_evm_norflash_resource[] = { }, }; -static struct platform_device da850_evm_norflash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &da850_evm_norflash_data, - }, - .num_resources = 1, - .resource = da850_evm_norflash_resource, -}; - /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash * (128K blocks). It may be used instead of the (default) SPI flash * to boot, using TI's tools to install the secondary boot loader @@ -266,37 +257,58 @@ static struct resource da850_evm_nandflash_resource[] = { }, }; -static struct platform_device da850_evm_nandflash_device = { - .name = "davinci_nand", - .id = 1, - .dev = { - .platform_data = &da850_evm_nandflash_data, +static struct resource da850_evm_aemif_resource[] = { + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, + .flags = IORESOURCE_MEM, + } +}; + +static struct aemif_abus_data da850_evm_aemif_abus_data[] = { + { + .cs = 3, + } +}; + +static struct platform_device da850_evm_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 1, + .dev = { + .platform_data = &da850_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), + .resource = da850_evm_nandflash_resource, }, - .num_resources = ARRAY_SIZE(da850_evm_nandflash_resource), - .resource = da850_evm_nandflash_resource, + { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &da850_evm_norflash_data, + }, + .num_resources = 1, + .resource = da850_evm_norflash_resource, + } }; -static struct platform_device *da850_evm_devices[] = { - &da850_evm_nandflash_device, - &da850_evm_norflash_device, +static struct aemif_platform_data da850_evm_aemif_pdata = { + .cs_offset = 2, + .abus_data = da850_evm_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data), + .sub_devices = da850_evm_aemif_devices, + .num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices), }; -#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10 -#define DA8XX_AEMIF_ASIZE_16BIT 0x1 - -static void __init da850_evm_init_nor(void) -{ - void __iomem *aemif_addr; - - aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K); - - /* Configure data bus width of CS2 to 16 bit */ - writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) | - DA8XX_AEMIF_ASIZE_16BIT, - aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET); - - iounmap(aemif_addr); -} +static struct platform_device da850_evm_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &da850_evm_aemif_pdata, + }, + .resource = da850_evm_aemif_resource, + .num_resources = ARRAY_SIZE(da850_evm_aemif_resource), +}; static const short da850_evm_nand_pins[] = { DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, @@ -339,13 +351,10 @@ static inline void da850_evm_setup_nor_nand(void) pr_warn("%s: NOR mux setup failed: %d\n", __func__, ret); - da850_evm_init_nor(); - - platform_add_devices(da850_evm_devices, - ARRAY_SIZE(da850_evm_devices)); - - if (davinci_aemif_setup(&da850_evm_nandflash_device)) - pr_warn("%s: Cannot configure AEMIF.\n", __func__); + ret = platform_device_register(&da850_evm_aemif_device); + if (ret) + pr_warn("%s: registering aemif failed: %d\n", + __func__, ret); } } @@ -1340,6 +1349,8 @@ static __init void da850_evm_init(void) { int ret; + da850_register_clocks(); + ret = da850_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index a3377f959444..f53a461a606f 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -394,6 +394,8 @@ static __init void dm355_evm_init(void) struct clk *aemif; int ret; + dm355_register_clocks(); + ret = dm355_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 8249a0bf69f0..0fdf1d03eb11 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -234,6 +234,8 @@ static __init void dm355_leopard_init(void) struct clk *aemif; int ret; + dm355_register_clocks(); + ret = dm355_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 435f7ec7d9af..8143756ff38b 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -159,16 +160,49 @@ static struct resource davinci_nand_resources[] = { }, }; -static struct platform_device davinci_nand_device = { - .name = "davinci_nand", - .id = 0, - .num_resources = ARRAY_SIZE(davinci_nand_resources), - .resource = davinci_nand_resources, - .dev = { - .platform_data = &davinci_nand_data, +static struct platform_device davinci_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 0, + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + .dev = { + .platform_data = &davinci_nand_data, + }, + } +}; + +static struct resource davinci_aemif_resources[] = { + { + .start = DM365_ASYNC_EMIF_CONTROL_BASE, + .end = DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, }, }; +static struct aemif_abus_data da850_evm_aemif_abus_data[] = { + { + .cs = 1, + }, +}; + +static struct aemif_platform_data davinci_aemif_pdata = { + .abus_data = da850_evm_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data), + .sub_devices = davinci_aemif_devices, + .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices), +}; + +static struct platform_device davinci_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &davinci_aemif_pdata, + }, + .resource = davinci_aemif_resources, + .num_resources = ARRAY_SIZE(davinci_aemif_resources), +}; + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, @@ -537,10 +571,6 @@ static void __init evm_init_i2c(void) i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } -static struct platform_device *dm365_evm_nand_devices[] __initdata = { - &davinci_nand_device, -}; - static inline int have_leds(void) { #ifdef CONFIG_LEDS_CLASS @@ -628,6 +658,7 @@ static void __init evm_init_cpld(void) u8 mux, resets; const char *label; struct clk *aemif_clk; + int rc; /* Make sure we can configure the CPLD through CS1. Then * leave it on for later access to MMC and LED registers. @@ -660,8 +691,10 @@ fail: /* external keypad mux */ mux |= BIT(7); - platform_add_devices(dm365_evm_nand_devices, - ARRAY_SIZE(dm365_evm_nand_devices)); + rc = platform_device_register(&davinci_aemif_device); + if (rc) + pr_warn("%s(): error registering the aemif device: %d\n", + __func__, rc); } else { /* no OneNAND support yet */ } @@ -742,6 +775,8 @@ static __init void dm365_evm_init(void) { int ret; + dm365_register_clocks(); + ret = dm365_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 48436f74fd71..e4a8f9225d16 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "davinci.h" @@ -174,14 +175,47 @@ static struct resource davinci_evm_nandflash_resource[] = { }, }; -static struct platform_device davinci_evm_nandflash_device = { - .name = "davinci_nand", - .id = 0, - .dev = { - .platform_data = &davinci_evm_nandflash_data, +static struct resource davinci_evm_aemif_resource[] = { + { + .start = DM644X_ASYNC_EMIF_CONTROL_BASE, + .end = DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, }, - .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), - .resource = davinci_evm_nandflash_resource, +}; + +static struct aemif_abus_data davinci_evm_aemif_abus_data[] = { + { + .cs = 1, + }, +}; + +static struct platform_device davinci_evm_nandflash_devices[] = { + { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, + }, +}; + +static struct aemif_platform_data davinci_evm_aemif_pdata = { + .abus_data = davinci_evm_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(davinci_evm_aemif_abus_data), + .sub_devices = davinci_evm_nandflash_devices, + .num_sub_devices = ARRAY_SIZE(davinci_evm_nandflash_devices), +}; + +static struct platform_device davinci_evm_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &davinci_evm_aemif_pdata, + }, + .resource = davinci_evm_aemif_resource, + .num_resources = ARRAY_SIZE(davinci_evm_aemif_resource), }; static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); @@ -773,6 +807,8 @@ static __init void davinci_evm_init(void) struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + dm644x_register_clocks(); + dm644x_init_devices(); ret = dm644x_gpio_register(); @@ -793,12 +829,7 @@ static __init void davinci_evm_init(void) /* only one device will be jumpered and detected */ if (HAS_NAND) { - platform_device_register(&davinci_evm_nandflash_device); - - if (davinci_aemif_setup(&davinci_evm_nandflash_device)) - pr_warn("%s: Cannot configure AEMIF\n", - __func__); - + platform_device_register(&davinci_evm_aemif_device); #ifdef CONFIG_I2C evm_leds[7].default_trigger = "nand-disk"; #endif diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 584064fdabf5..3e5ee09ee717 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -106,18 +107,49 @@ static struct resource davinci_nand_resources[] = { }, }; -static struct platform_device davinci_nand_device = { - .name = "davinci_nand", - .id = 0, - - .num_resources = ARRAY_SIZE(davinci_nand_resources), - .resource = davinci_nand_resources, - - .dev = { - .platform_data = &davinci_nand_data, +static struct platform_device davinci_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 0, + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + .dev = { + .platform_data = &davinci_nand_data, + }, }, }; +static struct resource davinci_aemif_resources[] = { + { + .start = DM646X_ASYNC_EMIF_CONTROL_BASE, + .end = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct aemif_abus_data davinci_aemif_abus_data[] = { + { + .cs = 1, + }, +}; + +static struct aemif_platform_data davinci_aemif_pdata = { + .abus_data = davinci_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(davinci_aemif_abus_data), + .sub_devices = davinci_aemif_devices, + .num_sub_devices = ARRAY_SIZE(davinci_aemif_devices), +}; + +static struct platform_device davinci_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &davinci_aemif_pdata, + }, + .resource = davinci_aemif_resources, + .num_resources = ARRAY_SIZE(davinci_aemif_resources), +}; + #define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ IS_ENABLED(CONFIG_PATA_BK3710)) @@ -776,6 +808,8 @@ static __init void evm_init(void) int ret; struct davinci_soc_info *soc_info = &davinci_soc_info; + dm646x_register_clocks(); + ret = dm646x_gpio_register(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); @@ -791,10 +825,8 @@ static __init void evm_init(void) if (machine_is_davinci_dm6467tevm()) davinci_nand_data.timing = &dm6467tevm_nandflash_timing; - platform_device_register(&davinci_nand_device); - - if (davinci_aemif_setup(&davinci_nand_device)) - pr_warn("%s: Cannot configure AEMIF.\n", __func__); + if (platform_device_register(&davinci_aemif_device)) + pr_warn("%s: Cannot register AEMIF device.\n", __func__); dm646x_init_edma(dm646x_edma_rsv); diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 37b3e48a21d1..2933e0c87cfa 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -422,27 +423,53 @@ static struct resource mityomapl138_nandflash_resource[] = { }, }; -static struct platform_device mityomapl138_nandflash_device = { - .name = "davinci_nand", - .id = 1, - .dev = { - .platform_data = &mityomapl138_nandflash_data, +static struct platform_device mityomapl138_aemif_devices[] = { + { + .name = "davinci_nand", + .id = 1, + .dev = { + .platform_data = &mityomapl138_nandflash_data, + }, + .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource), + .resource = mityomapl138_nandflash_resource, }, - .num_resources = ARRAY_SIZE(mityomapl138_nandflash_resource), - .resource = mityomapl138_nandflash_resource, }; -static struct platform_device *mityomapl138_devices[] __initdata = { - &mityomapl138_nandflash_device, +static struct resource mityomapl138_aemif_resources[] = { + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct aemif_abus_data mityomapl138_aemif_abus_data[] = { + { + .cs = 1, + }, +}; + +static struct aemif_platform_data mityomapl138_aemif_pdata = { + .abus_data = mityomapl138_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(mityomapl138_aemif_abus_data), + .sub_devices = mityomapl138_aemif_devices, + .num_sub_devices = ARRAY_SIZE(mityomapl138_aemif_devices), +}; + +static struct platform_device mityomapl138_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &mityomapl138_aemif_pdata, + }, + .resource = mityomapl138_aemif_resources, + .num_resources = ARRAY_SIZE(mityomapl138_aemif_resources), }; static void __init mityomapl138_setup_nand(void) { - platform_add_devices(mityomapl138_devices, - ARRAY_SIZE(mityomapl138_devices)); - - if (davinci_aemif_setup(&mityomapl138_nandflash_device)) - pr_warn("%s: Cannot configure AEMIF\n", __func__); + if (platform_device_register(&mityomapl138_aemif_device)) + pr_warn("%s: Cannot register AEMIF device\n", __func__); } static const short mityomap_mii_pins[] = { @@ -503,6 +530,8 @@ static void __init mityomapl138_init(void) { int ret; + da850_register_clocks(); + /* for now, no special EDMA channels are reserved */ ret = da850_register_edma(NULL); if (ret) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 25ad9b0612be..353f9e5a1454 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -175,6 +175,8 @@ static __init void davinci_ntosd2_init(void) struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + dm644x_register_clocks(); + dm644x_init_devices(); ret = dm644x_gpio_register(); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index be8b892a6ea7..8e8d51f4a276 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -15,7 +15,12 @@ #include #include #include +#include +#include #include +#include +#include +#include #include #include @@ -166,6 +171,129 @@ mmc_setup_mmcsd_fail: gpiod_remove_lookup_table(&mmc_gpios_table); } +static struct mtd_partition omapl138_hawk_nandflash_partition[] = { + { + .name = "u-boot env", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "u-boot", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "free space", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + }, +}; + +static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = { + .wsetup = 24, + .wstrobe = 21, + .whold = 14, + .rsetup = 19, + .rstrobe = 50, + .rhold = 0, + .ta = 20, +}; + +static struct davinci_nand_pdata omapl138_hawk_nandflash_data = { + .core_chipsel = 1, + .parts = omapl138_hawk_nandflash_partition, + .nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition), + .ecc_mode = NAND_ECC_HW, + .ecc_bits = 4, + .bbt_options = NAND_BBT_USE_FLASH, + .options = NAND_BUSWIDTH_16, + .timing = &omapl138_hawk_nandflash_timing, + .mask_chipsel = 0, + .mask_ale = 0, + .mask_cle = 0, +}; + +static struct resource omapl138_hawk_nandflash_resource[] = { + { + .start = DA8XX_AEMIF_CS3_BASE, + .end = DA8XX_AEMIF_CS3_BASE + SZ_32M, + .flags = IORESOURCE_MEM, + }, + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource omapl138_hawk_aemif_resource[] = { + { + .start = DA8XX_AEMIF_CTL_BASE, + .end = DA8XX_AEMIF_CTL_BASE + SZ_32K, + .flags = IORESOURCE_MEM, + } +}; + +static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = { + { + .cs = 3, + } +}; + +static struct platform_device omapl138_hawk_aemif_devices[] = { + { + .name = "davinci_nand", + .id = -1, + .dev = { + .platform_data = &omapl138_hawk_nandflash_data, + }, + .resource = omapl138_hawk_nandflash_resource, + .num_resources = ARRAY_SIZE(omapl138_hawk_nandflash_resource), + } +}; + +static struct aemif_platform_data omapl138_hawk_aemif_pdata = { + .cs_offset = 2, + .abus_data = omapl138_hawk_aemif_abus_data, + .num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data), + .sub_devices = omapl138_hawk_aemif_devices, + .num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices), +}; + +static struct platform_device omapl138_hawk_aemif_device = { + .name = "ti-aemif", + .id = -1, + .dev = { + .platform_data = &omapl138_hawk_aemif_pdata, + }, + .resource = omapl138_hawk_aemif_resource, + .num_resources = ARRAY_SIZE(omapl138_hawk_aemif_resource), +}; + +static const short omapl138_hawk_nand_pins[] = { + DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3, + DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3, + DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7, + DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11, + DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15, + DA850_EMA_A_1, DA850_EMA_A_2, + -1 +}; + +static int omapl138_hawk_register_aemif(void) +{ + int ret; + + ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins); + if (ret) + pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret); + + return platform_device_register(&omapl138_hawk_aemif_device); +} + static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id); static da8xx_ocic_handler_t hawk_usb_ocic_handler; @@ -236,14 +364,9 @@ static __init void omapl138_hawk_usb_init(void) return; } - ret = da8xx_register_usb20_phy_clk(false); + ret = da8xx_register_usb_phy_clocks(); if (ret) - pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n", - __func__, ret); - - ret = da8xx_register_usb11_phy_clk(false); - if (ret) - pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", + pr_warn("%s: USB PHY CLK registration failed: %d\n", __func__, ret); ret = da8xx_register_usb_phy(); @@ -285,6 +408,8 @@ static __init void omapl138_hawk_init(void) { int ret; + da850_register_clocks(); + ret = da850_register_gpio(); if (ret) pr_warn("%s: GPIO init failed: %d\n", __func__, ret); @@ -301,6 +426,10 @@ static __init void omapl138_hawk_init(void) omapl138_hawk_usb_init(); + ret = omapl138_hawk_register_aemif(); + if (ret) + pr_warn("%s: aemif registration failed: %d\n", __func__, ret); + ret = da8xx_register_watchdog(); if (ret) pr_warn("%s: watchdog registration failed: %d\n", diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index e7c1728b0833..792bb84d5011 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -134,6 +134,8 @@ static __init void davinci_sffsdr_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; + dm644x_register_clocks(); + dm644x_init_devices(); platform_add_devices(davinci_sffsdr_devices, diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c deleted file mode 100644 index f77a4f766050..000000000000 --- a/arch/arm/mach-davinci/clock.c +++ /dev/null @@ -1,745 +0,0 @@ -/* - * Clock and PLL control for DaVinci devices - * - * Copyright (C) 2006-2007 Texas Instruments. - * Copyright (C) 2008-2009 Deep Root Systems, LLC - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include "psc.h" -#include -#include "clock.h" - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clockfw_lock); - -void davinci_clk_enable(struct clk *clk) -{ - if (clk->parent) - davinci_clk_enable(clk->parent); - if (clk->usecount++ == 0) { - if (clk->flags & CLK_PSC) - davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, - true, clk->flags); - else if (clk->clk_enable) - clk->clk_enable(clk); - } -} - -void davinci_clk_disable(struct clk *clk) -{ - if (WARN_ON(clk->usecount == 0)) - return; - if (--clk->usecount == 0) { - if (!(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC)) - davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc, - false, clk->flags); - else if (clk->clk_disable) - clk->clk_disable(clk); - } - if (clk->parent) - davinci_clk_disable(clk->parent); -} - -int davinci_clk_reset(struct clk *clk, bool reset) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->flags & CLK_PSC) - davinci_psc_reset(clk->gpsc, clk->lpsc, reset); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -EXPORT_SYMBOL(davinci_clk_reset); - -int davinci_clk_reset_assert(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk) || !clk->reset) - return -EINVAL; - - return clk->reset(clk, true); -} -EXPORT_SYMBOL(davinci_clk_reset_assert); - -int davinci_clk_reset_deassert(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk) || !clk->reset) - return -EINVAL; - - return clk->reset(clk, false); -} -EXPORT_SYMBOL(davinci_clk_reset_deassert); - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (!clk) - return 0; - else if (IS_ERR(clk)) - return -EINVAL; - - spin_lock_irqsave(&clockfw_lock, flags); - davinci_clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (clk == NULL || IS_ERR(clk)) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - davinci_clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return 0; - - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk == NULL || IS_ERR(clk)) - return 0; - - if (clk->round_rate) - return clk->round_rate(clk, rate); - - return clk->rate; -} -EXPORT_SYMBOL(clk_round_rate); - -/* Propagate rate to children */ -static void propagate_rate(struct clk *root) -{ - struct clk *clk; - - list_for_each_entry(clk, &root->children, childnode) { - if (clk->recalc) - clk->rate = clk->recalc(clk); - propagate_rate(clk); - } -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (!clk) - return 0; - else if (IS_ERR(clk)) - return -EINVAL; - - if (clk->set_rate) - ret = clk->set_rate(clk, rate); - - spin_lock_irqsave(&clockfw_lock, flags); - if (ret == 0) { - if (clk->recalc) - clk->rate = clk->recalc(clk); - propagate_rate(clk); - } - spin_unlock_irqrestore(&clockfw_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - - if (!clk) - return 0; - else if (IS_ERR(clk)) - return -EINVAL; - - /* Cannot change parent on enabled clock */ - if (WARN_ON(clk->usecount)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - if (clk->set_parent) { - int ret = clk->set_parent(clk, parent); - - if (ret) { - mutex_unlock(&clocks_mutex); - return ret; - } - } - clk->parent = parent; - list_del_init(&clk->childnode); - list_add(&clk->childnode, &clk->parent->children); - mutex_unlock(&clocks_mutex); - - spin_lock_irqsave(&clockfw_lock, flags); - if (clk->recalc) - clk->rate = clk->recalc(clk); - propagate_rate(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - if (!clk) - return NULL; - - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -int clk_register(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - - if (WARN(clk->parent && !clk->parent->rate, - "CLK: %s parent %s has no rate!\n", - clk->name, clk->parent->name)) - return -EINVAL; - - INIT_LIST_HEAD(&clk->children); - - mutex_lock(&clocks_mutex); - list_add_tail(&clk->node, &clocks); - if (clk->parent) { - if (clk->set_parent) { - int ret = clk->set_parent(clk, clk->parent); - - if (ret) { - mutex_unlock(&clocks_mutex); - return ret; - } - } - list_add_tail(&clk->childnode, &clk->parent->children); - } - mutex_unlock(&clocks_mutex); - - /* If rate is already set, use it */ - if (clk->rate) - return 0; - - /* Else, see if there is a way to calculate it */ - if (clk->recalc) - clk->rate = clk->recalc(clk); - - /* Otherwise, default to parent rate */ - else if (clk->parent) - clk->rate = clk->parent->rate; - - return 0; -} -EXPORT_SYMBOL(clk_register); - -void clk_unregister(struct clk *clk) -{ - if (clk == NULL || IS_ERR(clk)) - return; - - mutex_lock(&clocks_mutex); - list_del(&clk->node); - list_del(&clk->childnode); - mutex_unlock(&clocks_mutex); -} -EXPORT_SYMBOL(clk_unregister); - -#ifdef CONFIG_DAVINCI_RESET_CLOCKS -/* - * Disable any unused clocks left on by the bootloader - */ -int __init davinci_clk_disable_unused(void) -{ - struct clk *ck; - - spin_lock_irq(&clockfw_lock); - list_for_each_entry(ck, &clocks, node) { - if (ck->usecount > 0) - continue; - if (!(ck->flags & CLK_PSC)) - continue; - - /* ignore if in Disabled or SwRstDisable states */ - if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc)) - continue; - - pr_debug("Clocks: disable unused %s\n", ck->name); - - davinci_psc_config(ck->domain, ck->gpsc, ck->lpsc, - false, ck->flags); - } - spin_unlock_irq(&clockfw_lock); - - return 0; -} -#endif - -static unsigned long clk_sysclk_recalc(struct clk *clk) -{ - u32 v, plldiv; - struct pll_data *pll; - unsigned long rate = clk->rate; - - /* If this is the PLL base clock, no more calculations needed */ - if (clk->pll_data) - return rate; - - if (WARN_ON(!clk->parent)) - return rate; - - rate = clk->parent->rate; - - /* Otherwise, the parent must be a PLL */ - if (WARN_ON(!clk->parent->pll_data)) - return rate; - - pll = clk->parent->pll_data; - - /* If pre-PLL, source clock is before the multiplier and divider(s) */ - if (clk->flags & PRE_PLL) - rate = pll->input_rate; - - if (!clk->div_reg) - return rate; - - v = __raw_readl(pll->base + clk->div_reg); - if (v & PLLDIV_EN) { - plldiv = (v & pll->div_ratio_mask) + 1; - if (plldiv) - rate /= plldiv; - } - - return rate; -} - -int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate) -{ - unsigned v; - struct pll_data *pll; - unsigned long input; - unsigned ratio = 0; - - /* If this is the PLL base clock, wrong function to call */ - if (clk->pll_data) - return -EINVAL; - - /* There must be a parent... */ - if (WARN_ON(!clk->parent)) - return -EINVAL; - - /* ... the parent must be a PLL... */ - if (WARN_ON(!clk->parent->pll_data)) - return -EINVAL; - - /* ... and this clock must have a divider. */ - if (WARN_ON(!clk->div_reg)) - return -EINVAL; - - pll = clk->parent->pll_data; - - input = clk->parent->rate; - - /* If pre-PLL, source clock is before the multiplier and divider(s) */ - if (clk->flags & PRE_PLL) - input = pll->input_rate; - - if (input > rate) { - /* - * Can afford to provide an output little higher than requested - * only if maximum rate supported by hardware on this sysclk - * is known. - */ - if (clk->maxrate) { - ratio = DIV_ROUND_CLOSEST(input, rate); - if (input / ratio > clk->maxrate) - ratio = 0; - } - - if (ratio == 0) - ratio = DIV_ROUND_UP(input, rate); - - ratio--; - } - - if (ratio > pll->div_ratio_mask) - return -EINVAL; - - do { - v = __raw_readl(pll->base + PLLSTAT); - } while (v & PLLSTAT_GOSTAT); - - v = __raw_readl(pll->base + clk->div_reg); - v &= ~pll->div_ratio_mask; - v |= ratio | PLLDIV_EN; - __raw_writel(v, pll->base + clk->div_reg); - - v = __raw_readl(pll->base + PLLCMD); - v |= PLLCMD_GOSET; - __raw_writel(v, pll->base + PLLCMD); - - do { - v = __raw_readl(pll->base + PLLSTAT); - } while (v & PLLSTAT_GOSTAT); - - return 0; -} -EXPORT_SYMBOL(davinci_set_sysclk_rate); - -static unsigned long clk_leafclk_recalc(struct clk *clk) -{ - if (WARN_ON(!clk->parent)) - return clk->rate; - - return clk->parent->rate; -} - -int davinci_simple_set_rate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 0; -} - -static unsigned long clk_pllclk_recalc(struct clk *clk) -{ - u32 ctrl, mult = 1, prediv = 1, postdiv = 1; - u8 bypass; - struct pll_data *pll = clk->pll_data; - unsigned long rate = clk->rate; - - ctrl = __raw_readl(pll->base + PLLCTL); - rate = pll->input_rate = clk->parent->rate; - - if (ctrl & PLLCTL_PLLEN) { - bypass = 0; - mult = __raw_readl(pll->base + PLLM); - if (cpu_is_davinci_dm365()) - mult = 2 * (mult & PLLM_PLLM_MASK); - else - mult = (mult & PLLM_PLLM_MASK) + 1; - } else - bypass = 1; - - if (pll->flags & PLL_HAS_PREDIV) { - prediv = __raw_readl(pll->base + PREDIV); - if (prediv & PLLDIV_EN) - prediv = (prediv & pll->div_ratio_mask) + 1; - else - prediv = 1; - } - - /* pre-divider is fixed, but (some?) chips won't report that */ - if (cpu_is_davinci_dm355() && pll->num == 1) - prediv = 8; - - if (pll->flags & PLL_HAS_POSTDIV) { - postdiv = __raw_readl(pll->base + POSTDIV); - if (postdiv & PLLDIV_EN) - postdiv = (postdiv & pll->div_ratio_mask) + 1; - else - postdiv = 1; - } - - if (!bypass) { - rate /= prediv; - rate *= mult; - rate /= postdiv; - } - - pr_debug("PLL%d: input = %lu MHz [ ", - pll->num, clk->parent->rate / 1000000); - if (bypass) - pr_debug("bypass "); - if (prediv > 1) - pr_debug("/ %d ", prediv); - if (mult > 1) - pr_debug("* %d ", mult); - if (postdiv > 1) - pr_debug("/ %d ", postdiv); - pr_debug("] --> %lu MHz output.\n", rate / 1000000); - - return rate; -} - -/** - * davinci_set_pllrate - set the output rate of a given PLL. - * - * Note: Currently tested to work with OMAP-L138 only. - * - * @pll: pll whose rate needs to be changed. - * @prediv: The pre divider value. Passing 0 disables the pre-divider. - * @pllm: The multiplier value. Passing 0 leads to multiply-by-one. - * @postdiv: The post divider value. Passing 0 disables the post-divider. - */ -int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, - unsigned int mult, unsigned int postdiv) -{ - u32 ctrl; - unsigned int locktime; - unsigned long flags; - - if (pll->base == NULL) - return -EINVAL; - - /* - * PLL lock time required per OMAP-L138 datasheet is - * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm) - * as 4 and OSCIN cycle as 25 MHz. - */ - if (prediv) { - locktime = ((2000 * prediv) / 100); - prediv = (prediv - 1) | PLLDIV_EN; - } else { - locktime = PLL_LOCK_TIME; - } - if (postdiv) - postdiv = (postdiv - 1) | PLLDIV_EN; - if (mult) - mult = mult - 1; - - /* Protect against simultaneous calls to PLL setting seqeunce */ - spin_lock_irqsave(&clockfw_lock, flags); - - ctrl = __raw_readl(pll->base + PLLCTL); - - /* Switch the PLL to bypass mode */ - ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); - __raw_writel(ctrl, pll->base + PLLCTL); - - udelay(PLL_BYPASS_TIME); - - /* Reset and enable PLL */ - ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS); - __raw_writel(ctrl, pll->base + PLLCTL); - - if (pll->flags & PLL_HAS_PREDIV) - __raw_writel(prediv, pll->base + PREDIV); - - __raw_writel(mult, pll->base + PLLM); - - if (pll->flags & PLL_HAS_POSTDIV) - __raw_writel(postdiv, pll->base + POSTDIV); - - udelay(PLL_RESET_TIME); - - /* Bring PLL out of reset */ - ctrl |= PLLCTL_PLLRST; - __raw_writel(ctrl, pll->base + PLLCTL); - - udelay(locktime); - - /* Remove PLL from bypass mode */ - ctrl |= PLLCTL_PLLEN; - __raw_writel(ctrl, pll->base + PLLCTL); - - spin_unlock_irqrestore(&clockfw_lock, flags); - - return 0; -} -EXPORT_SYMBOL(davinci_set_pllrate); - -/** - * davinci_set_refclk_rate() - Set the reference clock rate - * @rate: The new rate. - * - * Sets the reference clock rate to a given value. This will most likely - * result in the entire clock tree getting updated. - * - * This is used to support boards which use a reference clock different - * than that used by default in .c file. The reference clock rate - * should be updated early in the boot process; ideally soon after the - * clock tree has been initialized once with the default reference clock - * rate (davinci_clk_init()). - * - * Returns 0 on success, error otherwise. - */ -int davinci_set_refclk_rate(unsigned long rate) -{ - struct clk *refclk; - - refclk = clk_get(NULL, "ref"); - if (IS_ERR(refclk)) { - pr_err("%s: failed to get reference clock\n", __func__); - return PTR_ERR(refclk); - } - - clk_set_rate(refclk, rate); - - clk_put(refclk); - - return 0; -} - -int __init davinci_clk_init(struct clk_lookup *clocks) -{ - struct clk_lookup *c; - struct clk *clk; - size_t num_clocks = 0; - - for (c = clocks; c->clk; c++) { - clk = c->clk; - - if (!clk->recalc) { - - /* Check if clock is a PLL */ - if (clk->pll_data) - clk->recalc = clk_pllclk_recalc; - - /* Else, if it is a PLL-derived clock */ - else if (clk->flags & CLK_PLL) - clk->recalc = clk_sysclk_recalc; - - /* Otherwise, it is a leaf clock (PSC clock) */ - else if (clk->parent) - clk->recalc = clk_leafclk_recalc; - } - - if (clk->pll_data) { - struct pll_data *pll = clk->pll_data; - - if (!pll->div_ratio_mask) - pll->div_ratio_mask = PLLDIV_RATIO_MASK; - - if (pll->phys_base && !pll->base) { - pll->base = ioremap(pll->phys_base, SZ_4K); - WARN_ON(!pll->base); - } - } - - if (clk->recalc) - clk->rate = clk->recalc(clk); - - if (clk->lpsc) - clk->flags |= CLK_PSC; - - if (clk->flags & PSC_LRST) - clk->reset = davinci_clk_reset; - - clk_register(clk); - num_clocks++; - - /* Turn on clocks that Linux doesn't otherwise manage */ - if (clk->flags & ALWAYS_ENABLED) - clk_enable(clk); - } - - clkdev_add_table(clocks, num_clocks); - - return 0; -} - -#ifdef CONFIG_DEBUG_FS - -#include -#include - -#define CLKNAME_MAX 10 /* longest clock name */ -#define NEST_DELTA 2 -#define NEST_MAX 4 - -static void -dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) -{ - char *state; - char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; - struct clk *clk; - unsigned i; - - if (parent->flags & CLK_PLL) - state = "pll"; - else if (parent->flags & CLK_PSC) - state = "psc"; - else - state = ""; - - /* name */ - memset(buf, ' ', sizeof(buf) - 1); - buf[sizeof(buf) - 1] = 0; - i = strlen(parent->name); - memcpy(buf + nest, parent->name, - min(i, (unsigned)(sizeof(buf) - 1 - nest))); - - seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", - buf, parent->usecount, state, clk_get_rate(parent)); - /* REVISIT show device associations too */ - - /* cost is now small, but not linear... */ - list_for_each_entry(clk, &parent->children, childnode) { - dump_clock(s, nest + NEST_DELTA, clk); - } -} - -static int davinci_ck_show(struct seq_file *m, void *v) -{ - struct clk *clk; - - /* - * Show clock tree; We trust nonzero usecounts equate to PSC enables... - */ - mutex_lock(&clocks_mutex); - list_for_each_entry(clk, &clocks, node) - if (!clk->parent) - dump_clock(m, 0, clk); - mutex_unlock(&clocks_mutex); - - return 0; -} - -static int davinci_ck_open(struct inode *inode, struct file *file) -{ - return single_open(file, davinci_ck_show, NULL); -} - -static const struct file_operations davinci_ck_operations = { - .open = davinci_ck_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init davinci_clk_debugfs_init(void) -{ - debugfs_create_file("davinci_clocks", S_IFREG | S_IRUGO, NULL, NULL, - &davinci_ck_operations); - return 0; - -} -device_initcall(davinci_clk_debugfs_init); -#endif /* CONFIG_DEBUG_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index d7894d5aaa25..307383472400 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -12,10 +12,6 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H -#define DAVINCI_PLL1_BASE 0x01c40800 -#define DAVINCI_PLL2_BASE 0x01c40c00 -#define MAX_PLL 2 - /* PLL/Reset register offsets */ #define PLLCTL 0x100 #define PLLCTL_PLLEN BIT(0) @@ -65,76 +61,4 @@ */ #define PLL_LOCK_TIME 20 -#ifndef __ASSEMBLER__ - -#include -#include - -#define PLLSTAT_GOSTAT BIT(0) -#define PLLCMD_GOSET BIT(0) - -struct pll_data { - u32 phys_base; - void __iomem *base; - u32 num; - u32 flags; - u32 input_rate; - u32 div_ratio_mask; -}; -#define PLL_HAS_PREDIV 0x01 -#define PLL_HAS_POSTDIV 0x02 - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - unsigned long rate; - unsigned long maxrate; /* H/W supported max rate */ - u8 usecount; - u8 lpsc; - u8 gpsc; - u8 domain; - u32 flags; - struct clk *parent; - struct list_head children; /* list of children */ - struct list_head childnode; /* parent's child list node */ - struct pll_data *pll_data; - u32 div_reg; - unsigned long (*recalc) (struct clk *); - int (*set_rate) (struct clk *clk, unsigned long rate); - int (*round_rate) (struct clk *clk, unsigned long rate); - int (*reset) (struct clk *clk, bool reset); - void (*clk_enable) (struct clk *clk); - void (*clk_disable) (struct clk *clk); - int (*set_parent) (struct clk *clk, struct clk *parent); -}; - -/* Clock flags: SoC-specific flags start at BIT(16) */ -#define ALWAYS_ENABLED BIT(1) -#define CLK_PSC BIT(2) -#define CLK_PLL BIT(3) /* PLL-derived clock */ -#define PRE_PLL BIT(4) /* source is before PLL mult/div */ -#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */ -#define PSC_FORCE BIT(6) /* Force module state transtition */ -#define PSC_LRST BIT(8) /* Use local reset on enable/disable */ - -#define CLK(dev, con, ck) \ - { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - } \ - -int davinci_clk_init(struct clk_lookup *clocks); -int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, - unsigned int mult, unsigned int postdiv); -int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); -int davinci_set_refclk_rate(unsigned long rate); -int davinci_simple_set_rate(struct clk *clk, unsigned long rate); -int davinci_clk_reset(struct clk *clk, bool reset); -void davinci_clk_enable(struct clk *clk); -void davinci_clk_disable(struct clk *clk); - -#endif - #endif diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index bcb6a7ba84e9..e1d0f0d841ff 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -20,8 +20,6 @@ #include #include -#include "clock.h" - struct davinci_soc_info davinci_soc_info; EXPORT_SYMBOL(davinci_soc_info); @@ -118,5 +116,4 @@ err: void __init davinci_init_late(void) { davinci_cpufreq_init(); - davinci_clk_disable_unused(); } diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index 350d7673aa4d..0bc5bd2665df 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -8,21 +8,20 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include +#include #include #include -#include #include #include -#include "psc.h" -#include -#include #include -#include +#include #include +#include +#include -#include "clock.h" #include "mux.h" /* Offsets of the 8 compare registers on the da830 */ @@ -37,402 +36,6 @@ #define DA830_REF_FREQ 24000000 -static struct pll_data pll0_data = { - .num = 1, - .phys_base = DA8XX_PLL0_BASE, - .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - .rate = DA830_REF_FREQ, -}; - -static struct clk pll0_clk = { - .name = "pll0", - .parent = &ref_clk, - .pll_data = &pll0_data, - .flags = CLK_PLL, -}; - -static struct clk pll0_aux_clk = { - .name = "pll0_aux_clk", - .parent = &pll0_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll0_sysclk2 = { - .name = "pll0_sysclk2", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll0_sysclk3 = { - .name = "pll0_sysclk3", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll0_sysclk4 = { - .name = "pll0_sysclk4", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll0_sysclk5 = { - .name = "pll0_sysclk5", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll0_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll0_sysclk7 = { - .name = "pll0_sysclk7", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - -static struct clk i2c0_clk = { - .name = "i2c0", - .parent = &pll0_aux_clk, -}; - -static struct clk timerp64_0_clk = { - .name = "timer0", - .parent = &pll0_aux_clk, -}; - -static struct clk timerp64_1_clk = { - .name = "timer1", - .parent = &pll0_aux_clk, -}; - -static struct clk arm_rom_clk = { - .name = "arm_rom", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_ARM_RAM_ROM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk scr0_ss_clk = { - .name = "scr0_ss", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SCR0_SS, - .flags = ALWAYS_ENABLED, -}; - -static struct clk scr1_ss_clk = { - .name = "scr1_ss", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SCR1_SS, - .flags = ALWAYS_ENABLED, -}; - -static struct clk scr2_ss_clk = { - .name = "scr2_ss", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SCR2_SS, - .flags = ALWAYS_ENABLED, -}; - -static struct clk dmax_clk = { - .name = "dmax", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_PRUSS, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tpcc_clk = { - .name = "tpcc", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPCC, - .flags = ALWAYS_ENABLED | CLK_PSC, -}; - -static struct clk tptc0_clk = { - .name = "tptc0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPTC0, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tptc1_clk = { - .name = "tptc1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPTC1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk mmcsd_clk = { - .name = "mmcsd", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_MMC_SD, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_UART1, - .gpsc = 1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_UART2, - .gpsc = 1, -}; - -static struct clk spi0_clk = { - .name = "spi0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SPI0, -}; - -static struct clk spi1_clk = { - .name = "spi1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_SPI1, - .gpsc = 1, -}; - -static struct clk ecap0_clk = { - .name = "ecap0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_ECAP, - .gpsc = 1, -}; - -static struct clk ecap1_clk = { - .name = "ecap1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_ECAP, - .gpsc = 1, -}; - -static struct clk ecap2_clk = { - .name = "ecap2", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_ECAP, - .gpsc = 1, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_PWM, - .gpsc = 1, -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_PWM, - .gpsc = 1, -}; - -static struct clk pwm2_clk = { - .name = "pwm2", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_PWM, - .gpsc = 1, -}; - -static struct clk eqep0_clk = { - .name = "eqep0", - .parent = &pll0_sysclk2, - .lpsc = DA830_LPSC1_EQEP, - .gpsc = 1, -}; - -static struct clk eqep1_clk = { - .name = "eqep1", - .parent = &pll0_sysclk2, - .lpsc = DA830_LPSC1_EQEP, - .gpsc = 1, -}; - -static struct clk lcdc_clk = { - .name = "lcdc", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_LCDC, - .gpsc = 1, -}; - -static struct clk mcasp0_clk = { - .name = "mcasp0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_McASP0, - .gpsc = 1, -}; - -static struct clk mcasp1_clk = { - .name = "mcasp1", - .parent = &pll0_sysclk2, - .lpsc = DA830_LPSC1_McASP1, - .gpsc = 1, -}; - -static struct clk mcasp2_clk = { - .name = "mcasp2", - .parent = &pll0_sysclk2, - .lpsc = DA830_LPSC1_McASP2, - .gpsc = 1, -}; - -static struct clk usb20_clk = { - .name = "usb20", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_USB20, - .gpsc = 1, -}; - -static struct clk cppi41_clk = { - .name = "cppi41", - .parent = &usb20_clk, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll0_sysclk3, - .lpsc = DA8XX_LPSC0_EMIF25, - .flags = ALWAYS_ENABLED, -}; - -static struct clk aintc_clk = { - .name = "aintc", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC0_AINTC, - .flags = ALWAYS_ENABLED, -}; - -static struct clk secu_mgr_clk = { - .name = "secu_mgr", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC0_SECU_MGR, - .flags = ALWAYS_ENABLED, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_CPGMAC, - .gpsc = 1, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_GPIO, - .gpsc = 1, -}; - -static struct clk i2c1_clk = { - .name = "i2c1", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_I2C, - .gpsc = 1, -}; - -static struct clk usb11_clk = { - .name = "usb11", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_USB11, - .gpsc = 1, -}; - -static struct clk emif3_clk = { - .name = "emif3", - .parent = &pll0_sysclk5, - .lpsc = DA8XX_LPSC1_EMIF3C, - .gpsc = 1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk arm_clk = { - .name = "arm", - .parent = &pll0_sysclk6, - .lpsc = DA8XX_LPSC0_ARM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk rmii_clk = { - .name = "rmii", - .parent = &pll0_sysclk7, -}; - -static struct clk_lookup da830_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll0", &pll0_clk), - CLK(NULL, "pll0_aux", &pll0_aux_clk), - CLK(NULL, "pll0_sysclk2", &pll0_sysclk2), - CLK(NULL, "pll0_sysclk3", &pll0_sysclk3), - CLK(NULL, "pll0_sysclk4", &pll0_sysclk4), - CLK(NULL, "pll0_sysclk5", &pll0_sysclk5), - CLK(NULL, "pll0_sysclk6", &pll0_sysclk6), - CLK(NULL, "pll0_sysclk7", &pll0_sysclk7), - CLK("i2c_davinci.1", NULL, &i2c0_clk), - CLK(NULL, "timer0", &timerp64_0_clk), - CLK("davinci-wdt", NULL, &timerp64_1_clk), - CLK(NULL, "arm_rom", &arm_rom_clk), - CLK(NULL, "scr0_ss", &scr0_ss_clk), - CLK(NULL, "scr1_ss", &scr1_ss_clk), - CLK(NULL, "scr2_ss", &scr2_ss_clk), - CLK(NULL, "dmax", &dmax_clk), - CLK(NULL, "tpcc", &tpcc_clk), - CLK(NULL, "tptc0", &tptc0_clk), - CLK(NULL, "tptc1", &tptc1_clk), - CLK("da830-mmc.0", NULL, &mmcsd_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK("spi_davinci.0", NULL, &spi0_clk), - CLK("spi_davinci.1", NULL, &spi1_clk), - CLK(NULL, "ecap0", &ecap0_clk), - CLK(NULL, "ecap1", &ecap1_clk), - CLK(NULL, "ecap2", &ecap2_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "pwm2", &pwm2_clk), - CLK("eqep.0", NULL, &eqep0_clk), - CLK("eqep.1", NULL, &eqep1_clk), - CLK("da8xx_lcdc.0", "fck", &lcdc_clk), - CLK("davinci-mcasp.0", NULL, &mcasp0_clk), - CLK("davinci-mcasp.1", NULL, &mcasp1_clk), - CLK("davinci-mcasp.2", NULL, &mcasp2_clk), - CLK("musb-da8xx", NULL, &usb20_clk), - CLK("cppi41-dmaengine", NULL, &cppi41_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK(NULL, "aintc", &aintc_clk), - CLK(NULL, "secu_mgr", &secu_mgr_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK("i2c_davinci.2", NULL, &i2c1_clk), - CLK("ohci-da8xx", NULL, &usb11_clk), - CLK(NULL, "emif3", &emif3_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "rmii", &rmii_clk), - CLK(NULL, NULL, NULL), -}; - /* * Device specific mux setup * @@ -1130,8 +733,6 @@ static struct map_desc da830_io_desc[] = { }, }; -static u32 da830_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE }; - /* Contents of JTAG ID register used to identify exact cpu type */ static struct davinci_id da830_ids[] = { { @@ -1200,8 +801,6 @@ static const struct davinci_soc_info davinci_soc_info_da830 = { .jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG, .ids = da830_ids, .ids_num = ARRAY_SIZE(da830_ids), - .psc_bases = da830_psc_bases, - .psc_bases_num = ARRAY_SIZE(da830_psc_bases), .pinmux_base = DA8XX_SYSCFG0_BASE + 0x120, .pinmux_pins = da830_pins, .pinmux_pins_num = ARRAY_SIZE(da830_pins), @@ -1223,6 +822,53 @@ void __init da830_init(void) void __init da830_init_time(void) { - davinci_clk_init(da830_clks); - davinci_timer_init(); + void __iomem *pll; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA830_REF_FREQ); + + pll = ioremap(DA8XX_PLL0_BASE, SZ_4K); + + da830_pll_init(NULL, pll, NULL); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +static struct resource da830_psc0_resources[] = { + { + .start = DA8XX_PSC0_BASE, + .end = DA8XX_PSC0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da830_psc0_device = { + .name = "da830-psc0", + .id = -1, + .resource = da830_psc0_resources, + .num_resources = ARRAY_SIZE(da830_psc0_resources), +}; + +static struct resource da830_psc1_resources[] = { + { + .start = DA8XX_PSC1_BASE, + .end = DA8XX_PSC1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da830_psc1_device = { + .name = "da830-psc1", + .id = -1, + .resource = da830_psc1_resources, + .num_resources = ARRAY_SIZE(da830_psc1_resources), +}; + +void __init da830_register_clocks(void) +{ + /* PLL is registered in da830_init_time() */ + platform_device_register(&da830_psc0_device); + platform_device_register(&da830_psc1_device); } diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 34117e614e08..4528bbf0c861 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -11,27 +11,31 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ + +#include +#include #include +#include #include #include -#include -#include -#include -#include +#include +#include +#include #include +#include +#include +#include #include -#include "psc.h" -#include -#include #include -#include -#include #include +#include +#include +#include #include +#include -#include "clock.h" #include "mux.h" #define DA850_PLL1_BASE 0x01e1a000 @@ -40,550 +44,6 @@ #define DA850_REF_FREQ 24000000 -#define CFGCHIP3_ASYNC3_CLKSRC BIT(4) -#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5) -#define CFGCHIP0_PLL_MASTER_LOCK BIT(4) - -static int da850_set_armrate(struct clk *clk, unsigned long rate); -static int da850_round_armrate(struct clk *clk, unsigned long rate); -static int da850_set_pll0rate(struct clk *clk, unsigned long armrate); - -static struct pll_data pll0_data = { - .num = 1, - .phys_base = DA8XX_PLL0_BASE, - .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - .rate = DA850_REF_FREQ, - .set_rate = davinci_simple_set_rate, -}; - -static struct clk pll0_clk = { - .name = "pll0", - .parent = &ref_clk, - .pll_data = &pll0_data, - .flags = CLK_PLL, - .set_rate = da850_set_pll0rate, -}; - -static struct clk pll0_aux_clk = { - .name = "pll0_aux_clk", - .parent = &pll0_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll0_sysclk1 = { - .name = "pll0_sysclk1", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll0_sysclk2 = { - .name = "pll0_sysclk2", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll0_sysclk3 = { - .name = "pll0_sysclk3", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, - .set_rate = davinci_set_sysclk_rate, - .maxrate = 100000000, -}; - -static struct clk pll0_sysclk4 = { - .name = "pll0_sysclk4", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll0_sysclk5 = { - .name = "pll0_sysclk5", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll0_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll0_sysclk7 = { - .name = "pll0_sysclk7", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - -static struct pll_data pll1_data = { - .num = 2, - .phys_base = DA850_PLL1_BASE, - .flags = PLL_HAS_POSTDIV, -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .pll_data = &pll1_data, - .flags = CLK_PLL, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static int da850_async3_set_parent(struct clk *clk, struct clk *parent) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); - - if (parent == &pll0_sysclk2) { - val &= ~CFGCHIP3_ASYNC3_CLKSRC; - } else if (parent == &pll1_sysclk2) { - val |= CFGCHIP3_ASYNC3_CLKSRC; - } else { - pr_err("Bad parent on async3 clock mux\n"); - return -EINVAL; - } - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); - - return 0; -} - -static struct clk async3_clk = { - .name = "async3", - .parent = &pll1_sysclk2, - .set_parent = da850_async3_set_parent, -}; - -static struct clk i2c0_clk = { - .name = "i2c0", - .parent = &pll0_aux_clk, -}; - -static struct clk timerp64_0_clk = { - .name = "timer0", - .parent = &pll0_aux_clk, -}; - -static struct clk timerp64_1_clk = { - .name = "timer1", - .parent = &pll0_aux_clk, -}; - -static struct clk arm_rom_clk = { - .name = "arm_rom", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_ARM_RAM_ROM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tpcc0_clk = { - .name = "tpcc0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPCC, - .flags = ALWAYS_ENABLED | CLK_PSC, -}; - -static struct clk tptc0_clk = { - .name = "tptc0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPTC0, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tptc1_clk = { - .name = "tptc1", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_TPTC1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk tpcc1_clk = { - .name = "tpcc1", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_TPCC1, - .gpsc = 1, - .flags = CLK_PSC | ALWAYS_ENABLED, -}; - -static struct clk tptc2_clk = { - .name = "tptc2", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_TPTC2, - .gpsc = 1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk pruss_clk = { - .name = "pruss", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_PRUSS, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_UART1, - .gpsc = 1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_UART2, - .gpsc = 1, -}; - -static struct clk aintc_clk = { - .name = "aintc", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC0_AINTC, - .flags = ALWAYS_ENABLED, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_GPIO, - .gpsc = 1, -}; - -static struct clk i2c1_clk = { - .name = "i2c1", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_I2C, - .gpsc = 1, -}; - -static struct clk emif3_clk = { - .name = "emif3", - .parent = &pll0_sysclk5, - .lpsc = DA8XX_LPSC1_EMIF3C, - .gpsc = 1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk arm_clk = { - .name = "arm", - .parent = &pll0_sysclk6, - .lpsc = DA8XX_LPSC0_ARM, - .flags = ALWAYS_ENABLED, - .set_rate = da850_set_armrate, - .round_rate = da850_round_armrate, -}; - -static struct clk rmii_clk = { - .name = "rmii", - .parent = &pll0_sysclk7, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_CPGMAC, - .gpsc = 1, -}; - -/* - * In order to avoid adding the emac_clk to the clock lookup table twice (and - * screwing up the linked list in the process) create a separate clock for - * mdio inheriting the rate from emac_clk. - */ -static struct clk mdio_clk = { - .name = "mdio", - .parent = &emac_clk, -}; - -static struct clk mcasp_clk = { - .name = "mcasp", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_McASP0, - .gpsc = 1, -}; - -static struct clk mcbsp0_clk = { - .name = "mcbsp0", - .parent = &async3_clk, - .lpsc = DA850_LPSC1_McBSP0, - .gpsc = 1, -}; - -static struct clk mcbsp1_clk = { - .name = "mcbsp1", - .parent = &async3_clk, - .lpsc = DA850_LPSC1_McBSP1, - .gpsc = 1, -}; - -static struct clk lcdc_clk = { - .name = "lcdc", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_LCDC, - .gpsc = 1, -}; - -static struct clk mmcsd0_clk = { - .name = "mmcsd0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_MMC_SD, -}; - -static struct clk mmcsd1_clk = { - .name = "mmcsd1", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_MMC_SD1, - .gpsc = 1, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll0_sysclk3, - .lpsc = DA8XX_LPSC0_EMIF25, - .flags = ALWAYS_ENABLED, -}; - -/* - * In order to avoid adding the aemif_clk to the clock lookup table twice (and - * screwing up the linked list in the process) create a separate clock for - * nand inheriting the rate from aemif_clk. - */ -static struct clk aemif_nand_clk = { - .name = "nand", - .parent = &aemif_clk, -}; - -static struct clk usb11_clk = { - .name = "usb11", - .parent = &pll0_sysclk4, - .lpsc = DA8XX_LPSC1_USB11, - .gpsc = 1, -}; - -static struct clk usb20_clk = { - .name = "usb20", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC1_USB20, - .gpsc = 1, -}; - -static struct clk cppi41_clk = { - .name = "cppi41", - .parent = &usb20_clk, -}; - -static struct clk spi0_clk = { - .name = "spi0", - .parent = &pll0_sysclk2, - .lpsc = DA8XX_LPSC0_SPI0, -}; - -static struct clk spi1_clk = { - .name = "spi1", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_SPI1, - .gpsc = 1, -}; - -static struct clk vpif_clk = { - .name = "vpif", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_VPIF, - .gpsc = 1, -}; - -static struct clk sata_clk = { - .name = "sata", - .parent = &pll0_sysclk2, - .lpsc = DA850_LPSC1_SATA, - .gpsc = 1, - .flags = PSC_FORCE, -}; - -static struct clk dsp_clk = { - .name = "dsp", - .parent = &pll0_sysclk1, - .domain = DAVINCI_GPSC_DSPDOMAIN, - .lpsc = DA8XX_LPSC0_GEM, - .flags = PSC_LRST | PSC_FORCE, -}; - -static struct clk ehrpwm_clk = { - .name = "ehrpwm", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_PWM, - .gpsc = 1, -}; - -static struct clk ehrpwm0_clk = { - .name = "ehrpwm0", - .parent = &ehrpwm_clk, -}; - -static struct clk ehrpwm1_clk = { - .name = "ehrpwm1", - .parent = &ehrpwm_clk, -}; - -#define DA8XX_EHRPWM_TBCLKSYNC BIT(12) - -static void ehrpwm_tblck_enable(struct clk *clk) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); - val |= DA8XX_EHRPWM_TBCLKSYNC; - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); -} - -static void ehrpwm_tblck_disable(struct clk *clk) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); - val &= ~DA8XX_EHRPWM_TBCLKSYNC; - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP1_REG)); -} - -static struct clk ehrpwm_tbclk = { - .name = "ehrpwm_tbclk", - .parent = &ehrpwm_clk, - .clk_enable = ehrpwm_tblck_enable, - .clk_disable = ehrpwm_tblck_disable, -}; - -static struct clk ehrpwm0_tbclk = { - .name = "ehrpwm0_tbclk", - .parent = &ehrpwm_tbclk, -}; - -static struct clk ehrpwm1_tbclk = { - .name = "ehrpwm1_tbclk", - .parent = &ehrpwm_tbclk, -}; - -static struct clk ecap_clk = { - .name = "ecap", - .parent = &async3_clk, - .lpsc = DA8XX_LPSC1_ECAP, - .gpsc = 1, -}; - -static struct clk ecap0_clk = { - .name = "ecap0_clk", - .parent = &ecap_clk, -}; - -static struct clk ecap1_clk = { - .name = "ecap1_clk", - .parent = &ecap_clk, -}; - -static struct clk ecap2_clk = { - .name = "ecap2_clk", - .parent = &ecap_clk, -}; - -static struct clk_lookup da850_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll0", &pll0_clk), - CLK(NULL, "pll0_aux", &pll0_aux_clk), - CLK(NULL, "pll0_sysclk1", &pll0_sysclk1), - CLK(NULL, "pll0_sysclk2", &pll0_sysclk2), - CLK(NULL, "pll0_sysclk3", &pll0_sysclk3), - CLK(NULL, "pll0_sysclk4", &pll0_sysclk4), - CLK(NULL, "pll0_sysclk5", &pll0_sysclk5), - CLK(NULL, "pll0_sysclk6", &pll0_sysclk6), - CLK(NULL, "pll0_sysclk7", &pll0_sysclk7), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "async3", &async3_clk), - CLK("i2c_davinci.1", NULL, &i2c0_clk), - CLK(NULL, "timer0", &timerp64_0_clk), - CLK("davinci-wdt", NULL, &timerp64_1_clk), - CLK(NULL, "arm_rom", &arm_rom_clk), - CLK(NULL, "tpcc0", &tpcc0_clk), - CLK(NULL, "tptc0", &tptc0_clk), - CLK(NULL, "tptc1", &tptc1_clk), - CLK(NULL, "tpcc1", &tpcc1_clk), - CLK(NULL, "tptc2", &tptc2_clk), - CLK("pruss_uio", "pruss", &pruss_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK(NULL, "aintc", &aintc_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK("i2c_davinci.2", NULL, &i2c1_clk), - CLK(NULL, "emif3", &emif3_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "rmii", &rmii_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &mdio_clk), - CLK("davinci-mcasp.0", NULL, &mcasp_clk), - CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk), - CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk), - CLK("da8xx_lcdc.0", "fck", &lcdc_clk), - CLK("da830-mmc.0", NULL, &mmcsd0_clk), - CLK("da830-mmc.1", NULL, &mmcsd1_clk), - CLK("ti-aemif", NULL, &aemif_clk), - CLK("davinci-nand.0", "aemif", &aemif_nand_clk), - CLK("ohci-da8xx", NULL, &usb11_clk), - CLK("musb-da8xx", NULL, &usb20_clk), - CLK("cppi41-dmaengine", NULL, &cppi41_clk), - CLK("spi_davinci.0", NULL, &spi0_clk), - CLK("spi_davinci.1", NULL, &spi1_clk), - CLK("vpif", NULL, &vpif_clk), - CLK("ahci_da850", "fck", &sata_clk), - CLK("davinci-rproc.0", NULL, &dsp_clk), - CLK(NULL, NULL, &ehrpwm_clk), - CLK("ehrpwm.0", "fck", &ehrpwm0_clk), - CLK("ehrpwm.1", "fck", &ehrpwm1_clk), - CLK(NULL, NULL, &ehrpwm_tbclk), - CLK("ehrpwm.0", "tbclk", &ehrpwm0_tbclk), - CLK("ehrpwm.1", "tbclk", &ehrpwm1_tbclk), - CLK(NULL, NULL, &ecap_clk), - CLK("ecap.0", "fck", &ecap0_clk), - CLK("ecap.1", "fck", &ecap1_clk), - CLK("ecap.2", "fck", &ecap2_clk), - CLK(NULL, NULL, NULL), -}; - /* * Device specific mux setup * @@ -958,8 +418,6 @@ static struct map_desc da850_io_desc[] = { }, }; -static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE }; - /* Contents of JTAG ID register used to identify exact cpu type */ static struct davinci_id da850_ids[] = { { @@ -1169,89 +627,11 @@ int da850_register_cpufreq(char *async_clk) return platform_device_register(&da850_cpufreq_device); } - -static int da850_round_armrate(struct clk *clk, unsigned long rate) -{ - int ret = 0, diff; - unsigned int best = (unsigned int) -1; - struct cpufreq_frequency_table *table = cpufreq_info.freq_table; - struct cpufreq_frequency_table *pos; - - rate /= 1000; /* convert to kHz */ - - cpufreq_for_each_entry(pos, table) { - diff = pos->frequency - rate; - if (diff < 0) - diff = -diff; - - if (diff < best) { - best = diff; - ret = pos->frequency; - } - } - - return ret * 1000; -} - -static int da850_set_armrate(struct clk *clk, unsigned long index) -{ - struct clk *pllclk = &pll0_clk; - - return clk_set_rate(pllclk, index); -} - -static int da850_set_pll0rate(struct clk *clk, unsigned long rate) -{ - struct pll_data *pll = clk->pll_data; - struct cpufreq_frequency_table *freq; - unsigned int prediv, mult, postdiv; - struct da850_opp *opp = NULL; - int ret; - - rate /= 1000; - - for (freq = da850_freq_table; - freq->frequency != CPUFREQ_TABLE_END; freq++) { - /* rate is in Hz, freq->frequency is in KHz */ - if (freq->frequency == rate) { - opp = (struct da850_opp *)freq->driver_data; - break; - } - } - - if (!opp) - return -EINVAL; - - prediv = opp->prediv; - mult = opp->mult; - postdiv = opp->postdiv; - - ret = davinci_set_pllrate(pll, prediv, mult, postdiv); - if (WARN_ON(ret)) - return ret; - - return 0; -} #else int __init da850_register_cpufreq(char *async_clk) { return 0; } - -static int da850_set_armrate(struct clk *clk, unsigned long rate) -{ - return -EINVAL; -} - -static int da850_set_pll0rate(struct clk *clk, unsigned long armrate) -{ - return -EINVAL; -} - -static int da850_round_armrate(struct clk *clk, unsigned long rate) -{ - return clk->rate; -} #endif /* VPIF resource, platform data */ @@ -1353,8 +733,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = { .jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG, .ids = da850_ids, .ids_num = ARRAY_SIZE(da850_ids), - .psc_bases = da850_psc_bases, - .psc_bases_num = ARRAY_SIZE(da850_psc_bases), .pinmux_base = DA8XX_SYSCFG0_BASE + 0x120, .pinmux_pins = da850_pins, .pinmux_pins_num = ARRAY_SIZE(da850_pins), @@ -1370,8 +748,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = { void __init da850_init(void) { - unsigned int v; - davinci_common_init(&davinci_soc_info_da850); da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K); @@ -1379,22 +755,124 @@ void __init da850_init(void) return; da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K); - if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module")) - return; - - /* Unlock writing to PLL0 registers */ - v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG)); - v &= ~CFGCHIP0_PLL_MASTER_LOCK; - __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG)); - - /* Unlock writing to PLL1 registers */ - v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); - v &= ~CFGCHIP3_PLL1_MASTER_LOCK; - __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); + WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"); } void __init da850_init_time(void) { - davinci_clk_init(da850_clks); - davinci_timer_init(); + void __iomem *pll0; + struct regmap *cfgchip; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ); + + pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K); + cfgchip = da8xx_get_cfgchip(); + + da850_pll0_init(NULL, pll0, cfgchip); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +static struct resource da850_pll1_resources[] = { + { + .start = DA850_PLL1_BASE, + .end = DA850_PLL1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct davinci_pll_platform_data da850_pll1_pdata; + +static struct platform_device da850_pll1_device = { + .name = "da850-pll1", + .id = -1, + .resource = da850_pll1_resources, + .num_resources = ARRAY_SIZE(da850_pll1_resources), + .dev = { + .platform_data = &da850_pll1_pdata, + }, +}; + +static struct resource da850_psc0_resources[] = { + { + .start = DA8XX_PSC0_BASE, + .end = DA8XX_PSC0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da850_psc0_device = { + .name = "da850-psc0", + .id = -1, + .resource = da850_psc0_resources, + .num_resources = ARRAY_SIZE(da850_psc0_resources), +}; + +static struct resource da850_psc1_resources[] = { + { + .start = DA8XX_PSC1_BASE, + .end = DA8XX_PSC1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device da850_psc1_device = { + .name = "da850-psc1", + .id = -1, + .resource = da850_psc1_resources, + .num_resources = ARRAY_SIZE(da850_psc1_resources), +}; + +static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata; + +static struct platform_device da850_async1_clksrc_device = { + .name = "da850-async1-clksrc", + .id = -1, + .dev = { + .platform_data = &da850_async1_pdata, + }, +}; + +static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata; + +static struct platform_device da850_async3_clksrc_device = { + .name = "da850-async3-clksrc", + .id = -1, + .dev = { + .platform_data = &da850_async3_pdata, + }, +}; + +static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata; + +static struct platform_device da850_tbclksync_device = { + .name = "da830-tbclksync", + .id = -1, + .dev = { + .platform_data = &da850_tbclksync_pdata, + }, +}; + +void __init da850_register_clocks(void) +{ + /* PLL0 is registered in da850_init_time() */ + + da850_pll1_pdata.cfgchip = da8xx_get_cfgchip(); + platform_device_register(&da850_pll1_device); + + da850_async1_pdata.cfgchip = da8xx_get_cfgchip(); + platform_device_register(&da850_async1_clksrc_device); + + da850_async3_pdata.cfgchip = da8xx_get_cfgchip(); + platform_device_register(&da850_async3_clksrc_device); + + platform_device_register(&da850_psc0_device); + + platform_device_register(&da850_psc1_device); + + da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip(); + platform_device_register(&da850_tbclksync_device); } diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index ab199f4b9ce4..beac80ec4037 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -7,81 +7,16 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include -#include -#include -#include -#include #include #include -#include "cp_intc.h" #include -static struct of_dev_auxdata da850_aemif_auxdata_lookup[] = { - OF_DEV_AUXDATA("ti,davinci-nand", 0x62000000, "davinci-nand.0", NULL), - {} -}; - -static struct aemif_platform_data aemif_data = { - .dev_lookup = da850_aemif_auxdata_lookup, -}; - -static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), - OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL), - OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL), - OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL), - OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm.0", NULL), - OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm.1", NULL), - OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap.0", NULL), - OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap.1", NULL), - OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap.2", NULL), - OF_DEV_AUXDATA("ti,da830-spi", 0x01c41000, "spi_davinci.0", NULL), - OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL), - OF_DEV_AUXDATA("ns16550a", 0x01c42000, "serial8250.0", NULL), - OF_DEV_AUXDATA("ns16550a", 0x01d0c000, "serial8250.1", NULL), - OF_DEV_AUXDATA("ns16550a", 0x01d0d000, "serial8250.2", NULL), - OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL), - OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1", - NULL), - OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL), - OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", &aemif_data), - OF_DEV_AUXDATA("ti,da850-tilcdc", 0x01e13000, "da8xx_lcdc.0", NULL), - OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci-da8xx", NULL), - OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL), - OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL), - OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL), - OF_DEV_AUXDATA("ti,da850-vpif", 0x01e17000, "vpif", NULL), - OF_DEV_AUXDATA("ti,da850-dsp", 0x11800000, "davinci-rproc.0", NULL), - {} -}; - #ifdef CONFIG_ARCH_DAVINCI_DA850 static void __init da850_init_machine(void) { - /* All existing boards use 100MHz SATA refclkpn */ - static const unsigned long sata_refclkpn = 100 * 1000 * 1000; - - int ret; - - ret = da8xx_register_usb20_phy_clk(false); - if (ret) - pr_warn("%s: registering USB 2.0 PHY clock failed: %d", - __func__, ret); - ret = da8xx_register_usb11_phy_clk(false); - if (ret) - pr_warn("%s: registering USB 1.1 PHY clock failed: %d", - __func__, ret); - - ret = da850_register_sata_refclk(sata_refclkpn); - if (ret) - pr_warn("%s: registering SATA REFCLK failed: %d", - __func__, ret); - - of_platform_default_populate(NULL, da850_auxdata_lookup, NULL); davinci_pm_init(); pdata_quirks_init(); } @@ -96,7 +31,6 @@ static const char *const da850_boards_compat[] __initconst = { DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x") .map_io = da850_init, - .init_time = da850_init_time, .init_machine = da850_init_machine, .dt_compat = da850_boards_compat, .init_late = davinci_init_late, diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 376cdd51ce9d..db4c95ef4d5c 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -35,6 +35,10 @@ #include #include +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01c41000 + #define DAVINCI_SYSTEM_MODULE_BASE 0x01c40000 #define SYSMOD_VDAC_CONFIG 0x2c #define SYSMOD_VIDCLKCTL 0x38 @@ -84,6 +88,7 @@ int davinci_init_wdt(void); /* DM355 function declarations */ void dm355_init(void); void dm355_init_time(void); +void dm355_register_clocks(void); void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); void dm355_init_asp1(u32 evt_enable); @@ -93,6 +98,7 @@ int dm355_gpio_register(void); /* DM365 function declarations */ void dm365_init(void); void dm365_init_time(void); +void dm365_register_clocks(void); void dm365_init_asp(void); void dm365_init_vc(void); void dm365_init_ks(struct davinci_ks_platform_data *pdata); @@ -106,6 +112,7 @@ int dm365_gpio_register(void); void dm644x_init(void); void dm644x_init_devices(void); void dm644x_init_time(void); +void dm644x_register_clocks(void); void dm644x_init_asp(void); int dm644x_init_video(struct vpfe_config *, struct vpbe_config *); int dm644x_gpio_register(void); @@ -113,6 +120,7 @@ int dm644x_gpio_register(void); /* DM646x function declarations */ void dm646x_init(void); void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate); +void dm646x_register_clocks(void); void dm646x_init_mcasp0(struct snd_platform_data *pdata); void dm646x_init_mcasp1(struct snd_platform_data *pdata); int dm646x_init_edma(struct edma_rsv_info *rsv); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 78390c64e6ca..1fd3619f6a09 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -10,26 +10,26 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ +#include +#include +#include +#include +#include +#include #include #include -#include -#include -#include -#include #include -#include +#include -#include #include -#include +#include #include -#include +#include + +#include "asp.h" #include "cpuidle.h" #include "sram.h" -#include "clock.h" -#include "asp.h" - #define DA8XX_TPCC_BASE 0x01c00000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 @@ -1040,26 +1040,15 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect) } #ifdef CONFIG_ARCH_DAVINCI_DA850 -static struct clk sata_refclk = { - .name = "sata_refclk", - .set_rate = davinci_simple_set_rate, -}; - -static struct clk_lookup sata_refclk_lookup = - CLK("ahci_da850", "refclk", &sata_refclk); - int __init da850_register_sata_refclk(int rate) { - int ret; + struct clk *clk; - sata_refclk.rate = rate; - ret = clk_register(&sata_refclk); - if (ret) - return ret; + clk = clk_register_fixed_rate(NULL, "sata_refclk", NULL, 0, rate); + if (IS_ERR(clk)) + return PTR_ERR(clk); - clkdev_add(&sata_refclk_lookup); - - return 0; + return clk_register_clkdev(clk, "refclk", "ahci_da850"); } static struct resource da850_sata_resources[] = { diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 0edda4093e47..e8dbbb7479ab 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -26,7 +26,6 @@ #include "davinci.h" -#include "clock.h" #define DAVINCI_I2C_BASE 0x01C21000 #define DAVINCI_ATA_BASE 0x01C66000 diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index f29480495c18..9f7d38d12c88 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -8,31 +8,32 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include -#include -#include -#include + +#include +#include +#include #include #include -#include +#include #include #include #include +#include +#include +#include #include -#include -#include "psc.h" -#include -#include -#include -#include #include +#include +#include +#include +#include +#include -#include "davinci.h" -#include "clock.h" -#include "mux.h" #include "asp.h" +#include "davinci.h" +#include "mux.h" #define DM355_UART2_BASE (IO_PHYS + 0x206000) #define DM355_OSD_BASE (IO_PHYS + 0x70200) @@ -43,348 +44,6 @@ */ #define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */ -static struct pll_data pll1_data = { - .num = 1, - .phys_base = DAVINCI_PLL1_BASE, - .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, -}; - -static struct pll_data pll2_data = { - .num = 2, - .phys_base = DAVINCI_PLL2_BASE, - .flags = PLL_HAS_PREDIV, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - /* FIXME -- crystal rate is board-specific */ - .rate = DM355_REF_FREQ, -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .flags = CLK_PLL, - .pll_data = &pll1_data, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclk1 = { - .name = "pll1_sysclk1", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclkbp = { - .name = "pll1_sysclkbp", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk vpss_dac_clk = { - .name = "vpss_dac", - .parent = &pll1_sysclk3, - .lpsc = DM355_LPSC_VPSS_DAC, -}; - -static struct clk vpss_master_clk = { - .name = "vpss_master", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_VPSSMSTR, - .flags = CLK_PSC, -}; - -static struct clk vpss_slave_clk = { - .name = "vpss_slave", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_VPSSSLV, -}; - -static struct clk clkout1_clk = { - .name = "clkout1", - .parent = &pll1_aux_clk, - /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */ -}; - -static struct clk clkout2_clk = { - .name = "clkout2", - .parent = &pll1_sysclkbp, -}; - -static struct clk pll2_clk = { - .name = "pll2", - .parent = &ref_clk, - .flags = CLK_PLL, - .pll_data = &pll2_data, -}; - -static struct clk pll2_sysclk1 = { - .name = "pll2_sysclk1", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll2_sysclkbp = { - .name = "pll2_sysclkbp", - .parent = &pll2_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk clkout3_clk = { - .name = "clkout3", - .parent = &pll2_sysclkbp, - /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */ -}; - -static struct clk arm_clk = { - .name = "arm_clk", - .parent = &pll1_sysclk1, - .lpsc = DAVINCI_LPSC_ARM, - .flags = ALWAYS_ENABLED, -}; - -/* - * NOT LISTED below, and not touched by Linux - * - in SyncReset state by default - * .lpsc = DAVINCI_LPSC_TPCC, - * .lpsc = DAVINCI_LPSC_TPTC0, - * .lpsc = DAVINCI_LPSC_TPTC1, - * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk, - * .lpsc = DAVINCI_LPSC_MEMSTICK, - * - in Enabled state by default - * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS, - * .lpsc = DAVINCI_LPSC_SCR2, // "bus" - * .lpsc = DAVINCI_LPSC_SCR3, // "bus" - * .lpsc = DAVINCI_LPSC_SCR4, // "bus" - * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation" - * .lpsc = DAVINCI_LPSC_CFG27, // "test" - * .lpsc = DAVINCI_LPSC_CFG3, // "test" - * .lpsc = DAVINCI_LPSC_CFG5, // "test" - */ - -static struct clk mjcp_clk = { - .name = "mjcp", - .parent = &pll1_sysclk1, - .lpsc = DAVINCI_LPSC_IMCOP, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_UART2, -}; - -static struct clk i2c_clk = { - .name = "i2c", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_I2C, -}; - -static struct clk asp0_clk = { - .name = "asp0", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_McBSP, -}; - -static struct clk asp1_clk = { - .name = "asp1", - .parent = &pll1_sysclk2, - .lpsc = DM355_LPSC_McBSP1, -}; - -static struct clk mmcsd0_clk = { - .name = "mmcsd0", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_MMC_SD, -}; - -static struct clk mmcsd1_clk = { - .name = "mmcsd1", - .parent = &pll1_sysclk2, - .lpsc = DM355_LPSC_MMC_SD1, -}; - -static struct clk spi0_clk = { - .name = "spi0", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_SPI, -}; - -static struct clk spi1_clk = { - .name = "spi1", - .parent = &pll1_sysclk2, - .lpsc = DM355_LPSC_SPI1, -}; - -static struct clk spi2_clk = { - .name = "spi2", - .parent = &pll1_sysclk2, - .lpsc = DM355_LPSC_SPI2, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_GPIO, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_AEMIF, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM0, -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM1, -}; - -static struct clk pwm2_clk = { - .name = "pwm2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM2, -}; - -static struct clk pwm3_clk = { - .name = "pwm3", - .parent = &pll1_aux_clk, - .lpsc = DM355_LPSC_PWM3, -}; - -static struct clk timer0_clk = { - .name = "timer0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER0, -}; - -static struct clk timer1_clk = { - .name = "timer1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER1, -}; - -static struct clk timer2_clk = { - .name = "timer2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why can't this be disabled? */ -}; - -static struct clk timer3_clk = { - .name = "timer3", - .parent = &pll1_aux_clk, - .lpsc = DM355_LPSC_TIMER3, -}; - -static struct clk rto_clk = { - .name = "rto", - .parent = &pll1_aux_clk, - .lpsc = DM355_LPSC_RTO, -}; - -static struct clk usb_clk = { - .name = "usb", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_USB, -}; - -static struct clk_lookup dm355_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), - CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), - CLK(NULL, "vpss_dac", &vpss_dac_clk), - CLK("vpss", "master", &vpss_master_clk), - CLK("vpss", "slave", &vpss_slave_clk), - CLK(NULL, "clkout1", &clkout1_clk), - CLK(NULL, "clkout2", &clkout2_clk), - CLK(NULL, "pll2", &pll2_clk), - CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), - CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), - CLK(NULL, "clkout3", &clkout3_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "mjcp", &mjcp_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("davinci-mcbsp.0", NULL, &asp0_clk), - CLK("davinci-mcbsp.1", NULL, &asp1_clk), - CLK("dm6441-mmc.0", NULL, &mmcsd0_clk), - CLK("dm6441-mmc.1", NULL, &mmcsd1_clk), - CLK("spi_davinci.0", NULL, &spi0_clk), - CLK("spi_davinci.1", NULL, &spi1_clk), - CLK("spi_davinci.2", NULL, &spi2_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "pwm2", &pwm2_clk), - CLK(NULL, "pwm3", &pwm3_clk), - CLK(NULL, "timer0", &timer0_clk), - CLK(NULL, "timer1", &timer1_clk), - CLK("davinci-wdt", NULL, &timer2_clk), - CLK(NULL, "timer3", &timer3_clk), - CLK(NULL, "rto", &rto_clk), - CLK(NULL, "usb", &usb_clk), - CLK(NULL, NULL, NULL), -}; - -/*----------------------------------------------------------------------*/ - static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32); static struct resource dm355_spi0_resources[] = { @@ -926,8 +585,6 @@ static struct davinci_id dm355_ids[] = { }, }; -static u32 dm355_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE }; - /* * T0_BOT: Timer 0, bottom: clockevent source for hrtimers * T0_TOP: Timer 0, top : clocksource for generic timekeeping @@ -1012,8 +669,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = { .jtag_id_reg = 0x01c40028, .ids = dm355_ids, .ids_num = ARRAY_SIZE(dm355_ids), - .psc_bases = dm355_psc_bases, - .psc_bases_num = ARRAY_SIZE(dm355_psc_bases), .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm355_pins, .pinmux_pins_num = ARRAY_SIZE(dm355_pins), @@ -1046,8 +701,41 @@ void __init dm355_init(void) void __init dm355_init_time(void) { - davinci_clk_init(dm355_clks); - davinci_timer_init(); + void __iomem *pll1, *psc; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ); + + pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); + dm355_pll1_init(NULL, pll1, NULL); + + psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); + dm355_psc_init(NULL, psc); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +static struct resource dm355_pll2_resources[] = { + { + .start = DAVINCI_PLL2_BASE, + .end = DAVINCI_PLL2_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm355_pll2_device = { + .name = "dm355-pll2", + .id = -1, + .resource = dm355_pll2_resources, + .num_resources = ARRAY_SIZE(dm355_pll2_resources), +}; + +void __init dm355_register_clocks(void) +{ + /* PLL1 and PSC are registered in dm355_init_time() */ + platform_device_register(&dm355_pll2_device); } int __init dm355_init_video(struct vpfe_config *vpfe_cfg, diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 1e3df9df1e10..abcf2a5ed89b 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -12,32 +12,33 @@ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include -#include -#include -#include + +#include +#include +#include #include #include -#include +#include #include #include #include #include +#include +#include +#include #include -#include -#include "psc.h" -#include -#include -#include -#include #include +#include +#include +#include +#include +#include -#include "davinci.h" -#include "clock.h" -#include "mux.h" #include "asp.h" +#include "davinci.h" +#include "mux.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ #define DM365_RTC_BASE 0x01c69000 @@ -54,440 +55,6 @@ #define DM365_EMAC_CNTRL_RAM_OFFSET 0x1000 #define DM365_EMAC_CNTRL_RAM_SIZE 0x2000 -static struct pll_data pll1_data = { - .num = 1, - .phys_base = DAVINCI_PLL1_BASE, - .flags = PLL_HAS_POSTDIV | PLL_HAS_PREDIV, -}; - -static struct pll_data pll2_data = { - .num = 2, - .phys_base = DAVINCI_PLL2_BASE, - .flags = PLL_HAS_POSTDIV | PLL_HAS_PREDIV, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - .rate = DM365_REF_FREQ, -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .flags = CLK_PLL, - .pll_data = &pll1_data, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclkbp = { - .name = "pll1_sysclkbp", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk clkout0_clk = { - .name = "clkout0", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclk1 = { - .name = "pll1_sysclk1", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll1_sysclk6", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk7 = { - .name = "pll1_sysclk7", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - -static struct clk pll1_sysclk8 = { - .name = "pll1_sysclk8", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV8, -}; - -static struct clk pll1_sysclk9 = { - .name = "pll1_sysclk9", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV9, -}; - -static struct clk pll2_clk = { - .name = "pll2", - .parent = &ref_clk, - .flags = CLK_PLL, - .pll_data = &pll2_data, -}; - -static struct clk pll2_aux_clk = { - .name = "pll2_aux_clk", - .parent = &pll2_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk clkout1_clk = { - .name = "clkout1", - .parent = &pll2_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll2_sysclk1 = { - .name = "pll2_sysclk1", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll2_sysclk2 = { - .name = "pll2_sysclk2", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll2_sysclk3 = { - .name = "pll2_sysclk3", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll2_sysclk4 = { - .name = "pll2_sysclk4", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll2_sysclk5 = { - .name = "pll2_sysclk5", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll2_sysclk6 = { - .name = "pll2_sysclk6", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll2_sysclk7 = { - .name = "pll2_sysclk7", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - -static struct clk pll2_sysclk8 = { - .name = "pll2_sysclk8", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV8, -}; - -static struct clk pll2_sysclk9 = { - .name = "pll2_sysclk9", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV9, -}; - -static struct clk vpss_dac_clk = { - .name = "vpss_dac", - .parent = &pll1_sysclk3, - .lpsc = DM365_LPSC_DAC_CLK, -}; - -static struct clk vpss_master_clk = { - .name = "vpss_master", - .parent = &pll1_sysclk5, - .lpsc = DM365_LPSC_VPSSMSTR, - .flags = CLK_PSC, -}; - -static struct clk vpss_slave_clk = { - .name = "vpss_slave", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_VPSSSLV, -}; - -static struct clk arm_clk = { - .name = "arm_clk", - .parent = &pll2_sysclk2, - .lpsc = DAVINCI_LPSC_ARM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_UART1, -}; - -static struct clk i2c_clk = { - .name = "i2c", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_I2C, -}; - -static struct clk mmcsd0_clk = { - .name = "mmcsd0", - .parent = &pll1_sysclk8, - .lpsc = DAVINCI_LPSC_MMC_SD, -}; - -static struct clk mmcsd1_clk = { - .name = "mmcsd1", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_MMC_SD1, -}; - -static struct clk spi0_clk = { - .name = "spi0", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_SPI, -}; - -static struct clk spi1_clk = { - .name = "spi1", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_SPI1, -}; - -static struct clk spi2_clk = { - .name = "spi2", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_SPI2, -}; - -static struct clk spi3_clk = { - .name = "spi3", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_SPI3, -}; - -static struct clk spi4_clk = { - .name = "spi4", - .parent = &pll1_aux_clk, - .lpsc = DM365_LPSC_SPI4, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_GPIO, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_AEMIF, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM0, -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM1, -}; - -static struct clk pwm2_clk = { - .name = "pwm2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM2, -}; - -static struct clk pwm3_clk = { - .name = "pwm3", - .parent = &ref_clk, - .lpsc = DM365_LPSC_PWM3, -}; - -static struct clk timer0_clk = { - .name = "timer0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER0, -}; - -static struct clk timer1_clk = { - .name = "timer1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER1, -}; - -static struct clk timer2_clk = { - .name = "timer2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, -}; - -static struct clk timer3_clk = { - .name = "timer3", - .parent = &pll1_aux_clk, - .lpsc = DM365_LPSC_TIMER3, -}; - -static struct clk usb_clk = { - .name = "usb", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_USB, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_EMAC, -}; - -static struct clk voicecodec_clk = { - .name = "voice_codec", - .parent = &pll2_sysclk4, - .lpsc = DM365_LPSC_VOICE_CODEC, -}; - -static struct clk asp0_clk = { - .name = "asp0", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_McBSP1, -}; - -static struct clk rto_clk = { - .name = "rto", - .parent = &pll1_sysclk4, - .lpsc = DM365_LPSC_RTO, -}; - -static struct clk mjcp_clk = { - .name = "mjcp", - .parent = &pll1_sysclk3, - .lpsc = DM365_LPSC_MJCP, -}; - -static struct clk_lookup dm365_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), - CLK(NULL, "clkout0", &clkout0_clk), - CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), - CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), - CLK(NULL, "pll1_sysclk8", &pll1_sysclk8), - CLK(NULL, "pll1_sysclk9", &pll1_sysclk9), - CLK(NULL, "pll2", &pll2_clk), - CLK(NULL, "pll2_aux", &pll2_aux_clk), - CLK(NULL, "clkout1", &clkout1_clk), - CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), - CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), - CLK(NULL, "pll2_sysclk3", &pll2_sysclk3), - CLK(NULL, "pll2_sysclk4", &pll2_sysclk4), - CLK(NULL, "pll2_sysclk5", &pll2_sysclk5), - CLK(NULL, "pll2_sysclk6", &pll2_sysclk6), - CLK(NULL, "pll2_sysclk7", &pll2_sysclk7), - CLK(NULL, "pll2_sysclk8", &pll2_sysclk8), - CLK(NULL, "pll2_sysclk9", &pll2_sysclk9), - CLK(NULL, "vpss_dac", &vpss_dac_clk), - CLK("vpss", "master", &vpss_master_clk), - CLK("vpss", "slave", &vpss_slave_clk), - CLK(NULL, "arm", &arm_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("da830-mmc.0", NULL, &mmcsd0_clk), - CLK("da830-mmc.1", NULL, &mmcsd1_clk), - CLK("spi_davinci.0", NULL, &spi0_clk), - CLK("spi_davinci.1", NULL, &spi1_clk), - CLK("spi_davinci.2", NULL, &spi2_clk), - CLK("spi_davinci.3", NULL, &spi3_clk), - CLK("spi_davinci.4", NULL, &spi4_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "pwm2", &pwm2_clk), - CLK(NULL, "pwm3", &pwm3_clk), - CLK(NULL, "timer0", &timer0_clk), - CLK(NULL, "timer1", &timer1_clk), - CLK("davinci-wdt", NULL, &timer2_clk), - CLK(NULL, "timer3", &timer3_clk), - CLK(NULL, "usb", &usb_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), - CLK("davinci_voicecodec", NULL, &voicecodec_clk), - CLK("davinci-mcbsp", NULL, &asp0_clk), - CLK(NULL, "rto", &rto_clk), - CLK(NULL, "mjcp", &mjcp_clk), - CLK(NULL, NULL, NULL), -}; - -/*----------------------------------------------------------------------*/ - #define INTMUX 0x18 #define EVTMUX 0x1c @@ -1054,8 +621,6 @@ static struct davinci_id dm365_ids[] = { }, }; -static u32 dm365_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE }; - static struct davinci_timer_info dm365_timer_info = { .timers = davinci_timer_instance, .clockevent_id = T0_BOT, @@ -1116,8 +681,6 @@ static const struct davinci_soc_info davinci_soc_info_dm365 = { .jtag_id_reg = 0x01c40028, .ids = dm365_ids, .ids_num = ARRAY_SIZE(dm365_ids), - .psc_bases = dm365_psc_bases, - .psc_bases_num = ARRAY_SIZE(dm365_psc_bases), .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm365_pins, .pinmux_pins_num = ARRAY_SIZE(dm365_pins), @@ -1171,8 +734,28 @@ void __init dm365_init(void) void __init dm365_init_time(void) { - davinci_clk_init(dm365_clks); - davinci_timer_init(); + void __iomem *pll1, *pll2, *psc; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ); + + pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); + dm365_pll1_init(NULL, pll1, NULL); + + pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_1K); + dm365_pll2_init(NULL, pll2, NULL); + + psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); + dm365_psc_init(NULL, psc); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +void __init dm365_register_clocks(void) +{ + /* all clocks are currently registered in dm365_init_time() */ } static struct resource dm365_vpss_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index a2e8586c8a6d..0720da7809a6 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -8,28 +8,29 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include -#include -#include + +#include +#include +#include #include -#include +#include #include #include +#include +#include #include +#include #include #include -#include "psc.h" #include -#include #include -#include +#include -#include "davinci.h" -#include "clock.h" -#include "mux.h" #include "asp.h" +#include "davinci.h" +#include "mux.h" /* * Device specific clocks @@ -43,290 +44,6 @@ #define DM644X_EMAC_CNTRL_RAM_OFFSET 0x2000 #define DM644X_EMAC_CNTRL_RAM_SIZE 0x2000 -static struct pll_data pll1_data = { - .num = 1, - .phys_base = DAVINCI_PLL1_BASE, -}; - -static struct pll_data pll2_data = { - .num = 2, - .phys_base = DAVINCI_PLL2_BASE, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - .rate = DM644X_REF_FREQ, -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .pll_data = &pll1_data, - .flags = CLK_PLL, -}; - -static struct clk pll1_sysclk1 = { - .name = "pll1_sysclk1", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll1_sysclkbp = { - .name = "pll1_sysclkbp", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk pll2_clk = { - .name = "pll2", - .parent = &ref_clk, - .pll_data = &pll2_data, - .flags = CLK_PLL, -}; - -static struct clk pll2_sysclk1 = { - .name = "pll2_sysclk1", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll2_sysclk2 = { - .name = "pll2_sysclk2", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll2_sysclkbp = { - .name = "pll2_sysclkbp", - .parent = &pll2_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV -}; - -static struct clk dsp_clk = { - .name = "dsp", - .parent = &pll1_sysclk1, - .lpsc = DAVINCI_LPSC_GEM, - .domain = DAVINCI_GPSC_DSPDOMAIN, - .usecount = 1, /* REVISIT how to disable? */ -}; - -static struct clk arm_clk = { - .name = "arm", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_ARM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk vicp_clk = { - .name = "vicp", - .parent = &pll1_sysclk2, - .lpsc = DAVINCI_LPSC_IMCOP, - .domain = DAVINCI_GPSC_DSPDOMAIN, - .usecount = 1, /* REVISIT how to disable? */ -}; - -static struct clk vpss_master_clk = { - .name = "vpss_master", - .parent = &pll1_sysclk3, - .lpsc = DAVINCI_LPSC_VPSSMSTR, - .flags = CLK_PSC, -}; - -static struct clk vpss_slave_clk = { - .name = "vpss_slave", - .parent = &pll1_sysclk3, - .lpsc = DAVINCI_LPSC_VPSSSLV, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_UART2, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, -}; - -static struct clk i2c_clk = { - .name = "i2c", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_I2C, -}; - -static struct clk ide_clk = { - .name = "ide", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_ATA, -}; - -static struct clk asp_clk = { - .name = "asp0", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_McBSP, -}; - -static struct clk mmcsd_clk = { - .name = "mmcsd", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_MMC_SD, -}; - -static struct clk spi_clk = { - .name = "spi", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_SPI, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_GPIO, -}; - -static struct clk usb_clk = { - .name = "usb", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_USB, -}; - -static struct clk vlynq_clk = { - .name = "vlynq", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_VLYNQ, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll1_sysclk5, - .lpsc = DAVINCI_LPSC_AEMIF, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM0, -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM1, -}; - -static struct clk pwm2_clk = { - .name = "pwm2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_PWM2, -}; - -static struct clk timer0_clk = { - .name = "timer0", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER0, -}; - -static struct clk timer1_clk = { - .name = "timer1", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER1, -}; - -static struct clk timer2_clk = { - .name = "timer2", - .parent = &pll1_aux_clk, - .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why can't this be disabled? */ -}; - -static struct clk_lookup dm644x_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), - CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), - CLK(NULL, "pll2", &pll2_clk), - CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), - CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), - CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), - CLK(NULL, "dsp", &dsp_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "vicp", &vicp_clk), - CLK("vpss", "master", &vpss_master_clk), - CLK("vpss", "slave", &vpss_slave_clk), - CLK(NULL, "arm", &arm_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), - CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("palm_bk3710", NULL, &ide_clk), - CLK("davinci-mcbsp", NULL, &asp_clk), - CLK("dm6441-mmc.0", NULL, &mmcsd_clk), - CLK(NULL, "spi", &spi_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK(NULL, "usb", &usb_clk), - CLK(NULL, "vlynq", &vlynq_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "pwm2", &pwm2_clk), - CLK(NULL, "timer0", &timer0_clk), - CLK(NULL, "timer1", &timer1_clk), - CLK("davinci-wdt", NULL, &timer2_clk), - CLK(NULL, NULL, NULL), -}; - static struct emac_platform_data dm644x_emac_pdata = { .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, @@ -819,8 +536,6 @@ static struct davinci_id dm644x_ids[] = { }, }; -static u32 dm644x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE }; - /* * T0_BOT: Timer 0, bottom: clockevent source for hrtimers * T0_TOP: Timer 0, top : clocksource for generic timekeeping @@ -905,8 +620,6 @@ static const struct davinci_soc_info davinci_soc_info_dm644x = { .jtag_id_reg = 0x01c40028, .ids = dm644x_ids, .ids_num = ARRAY_SIZE(dm644x_ids), - .psc_bases = dm644x_psc_bases, - .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases), .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm644x_pins, .pinmux_pins_num = ARRAY_SIZE(dm644x_pins), @@ -934,8 +647,41 @@ void __init dm644x_init(void) void __init dm644x_init_time(void) { - davinci_clk_init(dm644x_clks); - davinci_timer_init(); + void __iomem *pll1, *psc; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM644X_REF_FREQ); + + pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); + dm644x_pll1_init(NULL, pll1, NULL); + + psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); + dm644x_psc_init(NULL, psc); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +static struct resource dm644x_pll2_resources[] = { + { + .start = DAVINCI_PLL2_BASE, + .end = DAVINCI_PLL2_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm644x_pll2_device = { + .name = "dm644x-pll2", + .id = -1, + .resource = dm644x_pll2_resources, + .num_resources = ARRAY_SIZE(dm644x_pll2_resources), +}; + +void __init dm644x_register_clocks(void) +{ + /* PLL1 and PSC are registered in dm644x_init_time() */ + platform_device_register(&dm644x_pll2_device); } int __init dm644x_init_video(struct vpfe_config *vpfe_cfg, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index c32ca27ab343..6bd2ed069d0d 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -8,29 +8,30 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ + +#include +#include +#include #include #include #include -#include -#include -#include #include #include +#include +#include #include +#include #include #include -#include "psc.h" #include -#include #include -#include +#include -#include "davinci.h" -#include "clock.h" -#include "mux.h" #include "asp.h" +#include "davinci.h" +#include "mux.h" #define DAVINCI_VPIF_BASE (0x01C12000) @@ -46,317 +47,6 @@ #define DM646X_EMAC_CNTRL_RAM_OFFSET 0x2000 #define DM646X_EMAC_CNTRL_RAM_SIZE 0x2000 -static struct pll_data pll1_data = { - .num = 1, - .phys_base = DAVINCI_PLL1_BASE, -}; - -static struct pll_data pll2_data = { - .num = 2, - .phys_base = DAVINCI_PLL2_BASE, -}; - -static struct clk ref_clk = { - .name = "ref_clk", - /* rate is initialized in dm646x_init_time() */ -}; - -static struct clk aux_clkin = { - .name = "aux_clkin", - /* rate is initialized in dm646x_init_time() */ -}; - -static struct clk pll1_clk = { - .name = "pll1", - .parent = &ref_clk, - .pll_data = &pll1_data, - .flags = CLK_PLL, -}; - -static struct clk pll1_sysclk1 = { - .name = "pll1_sysclk1", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk pll1_sysclk2 = { - .name = "pll1_sysclk2", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV2, -}; - -static struct clk pll1_sysclk3 = { - .name = "pll1_sysclk3", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV3, -}; - -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll1_sysclk6", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk8 = { - .name = "pll1_sysclk8", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV8, -}; - -static struct clk pll1_sysclk9 = { - .name = "pll1_sysclk9", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV9, -}; - -static struct clk pll1_sysclkbp = { - .name = "pll1_sysclkbp", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, - .div_reg = BPDIV, -}; - -static struct clk pll1_aux_clk = { - .name = "pll1_aux_clk", - .parent = &pll1_clk, - .flags = CLK_PLL | PRE_PLL, -}; - -static struct clk pll2_clk = { - .name = "pll2_clk", - .parent = &ref_clk, - .pll_data = &pll2_data, - .flags = CLK_PLL, -}; - -static struct clk pll2_sysclk1 = { - .name = "pll2_sysclk1", - .parent = &pll2_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV1, -}; - -static struct clk dsp_clk = { - .name = "dsp", - .parent = &pll1_sysclk1, - .lpsc = DM646X_LPSC_C64X_CPU, - .usecount = 1, /* REVISIT how to disable? */ -}; - -static struct clk arm_clk = { - .name = "arm", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_ARM, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_cc_clk = { - .name = "edma_cc", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPCC, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_tc0_clk = { - .name = "edma_tc0", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPTC0, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_tc1_clk = { - .name = "edma_tc1", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPTC1, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_tc2_clk = { - .name = "edma_tc2", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPTC2, - .flags = ALWAYS_ENABLED, -}; - -static struct clk edma_tc3_clk = { - .name = "edma_tc3", - .parent = &pll1_sysclk2, - .lpsc = DM646X_LPSC_TPTC3, - .flags = ALWAYS_ENABLED, -}; - -static struct clk uart0_clk = { - .name = "uart0", - .parent = &aux_clkin, - .lpsc = DM646X_LPSC_UART0, -}; - -static struct clk uart1_clk = { - .name = "uart1", - .parent = &aux_clkin, - .lpsc = DM646X_LPSC_UART1, -}; - -static struct clk uart2_clk = { - .name = "uart2", - .parent = &aux_clkin, - .lpsc = DM646X_LPSC_UART2, -}; - -static struct clk i2c_clk = { - .name = "I2CCLK", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_I2C, -}; - -static struct clk gpio_clk = { - .name = "gpio", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_GPIO, -}; - -static struct clk mcasp0_clk = { - .name = "mcasp0", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_McASP0, -}; - -static struct clk mcasp1_clk = { - .name = "mcasp1", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_McASP1, -}; - -static struct clk aemif_clk = { - .name = "aemif", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_AEMIF, - .flags = ALWAYS_ENABLED, -}; - -static struct clk emac_clk = { - .name = "emac", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_EMAC, -}; - -static struct clk pwm0_clk = { - .name = "pwm0", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_PWM0, - .usecount = 1, /* REVIST: disabling hangs system */ -}; - -static struct clk pwm1_clk = { - .name = "pwm1", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_PWM1, - .usecount = 1, /* REVIST: disabling hangs system */ -}; - -static struct clk timer0_clk = { - .name = "timer0", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_TIMER0, -}; - -static struct clk timer1_clk = { - .name = "timer1", - .parent = &pll1_sysclk3, - .lpsc = DM646X_LPSC_TIMER1, -}; - -static struct clk timer2_clk = { - .name = "timer2", - .parent = &pll1_sysclk3, - .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */ -}; - - -static struct clk ide_clk = { - .name = "ide", - .parent = &pll1_sysclk4, - .lpsc = DAVINCI_LPSC_ATA, -}; - -static struct clk vpif0_clk = { - .name = "vpif0", - .parent = &ref_clk, - .lpsc = DM646X_LPSC_VPSSMSTR, - .flags = ALWAYS_ENABLED, -}; - -static struct clk vpif1_clk = { - .name = "vpif1", - .parent = &ref_clk, - .lpsc = DM646X_LPSC_VPSSSLV, - .flags = ALWAYS_ENABLED, -}; - -static struct clk_lookup dm646x_clks[] = { - CLK(NULL, "ref", &ref_clk), - CLK(NULL, "aux", &aux_clkin), - CLK(NULL, "pll1", &pll1_clk), - CLK(NULL, "pll1_sysclk", &pll1_sysclk1), - CLK(NULL, "pll1_sysclk", &pll1_sysclk2), - CLK(NULL, "pll1_sysclk", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk", &pll1_sysclk8), - CLK(NULL, "pll1_sysclk", &pll1_sysclk9), - CLK(NULL, "pll1_sysclk", &pll1_sysclkbp), - CLK(NULL, "pll1_aux", &pll1_aux_clk), - CLK(NULL, "pll2", &pll2_clk), - CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), - CLK(NULL, "dsp", &dsp_clk), - CLK(NULL, "arm", &arm_clk), - CLK(NULL, "edma_cc", &edma_cc_clk), - CLK(NULL, "edma_tc0", &edma_tc0_clk), - CLK(NULL, "edma_tc1", &edma_tc1_clk), - CLK(NULL, "edma_tc2", &edma_tc2_clk), - CLK(NULL, "edma_tc3", &edma_tc3_clk), - CLK("serial8250.0", NULL, &uart0_clk), - CLK("serial8250.1", NULL, &uart1_clk), - CLK("serial8250.2", NULL, &uart2_clk), - CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK(NULL, "gpio", &gpio_clk), - CLK("davinci-mcasp.0", NULL, &mcasp0_clk), - CLK("davinci-mcasp.1", NULL, &mcasp1_clk), - CLK(NULL, "aemif", &aemif_clk), - CLK("davinci_emac.1", NULL, &emac_clk), - CLK("davinci_mdio.0", "fck", &emac_clk), - CLK(NULL, "pwm0", &pwm0_clk), - CLK(NULL, "pwm1", &pwm1_clk), - CLK(NULL, "timer0", &timer0_clk), - CLK(NULL, "timer1", &timer1_clk), - CLK("davinci-wdt", NULL, &timer2_clk), - CLK("palm_bk3710", NULL, &ide_clk), - CLK(NULL, "vpif0", &vpif0_clk), - CLK(NULL, "vpif1", &vpif1_clk), - CLK(NULL, NULL, NULL), -}; - static struct emac_platform_data dm646x_emac_pdata = { .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, @@ -796,8 +486,6 @@ static struct davinci_id dm646x_ids[] = { }, }; -static u32 dm646x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE }; - /* * T0_BOT: Timer 0, bottom: clockevent source for hrtimers * T0_TOP: Timer 0, top : clocksource for generic timekeeping @@ -882,8 +570,6 @@ static const struct davinci_soc_info davinci_soc_info_dm646x = { .jtag_id_reg = 0x01c40028, .ids = dm646x_ids, .ids_num = ARRAY_SIZE(dm646x_ids), - .psc_bases = dm646x_psc_bases, - .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases), .pinmux_base = DAVINCI_SYSTEM_MODULE_BASE, .pinmux_pins = dm646x_pins, .pinmux_pins_num = ARRAY_SIZE(dm646x_pins), @@ -954,10 +640,42 @@ void __init dm646x_init(void) void __init dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate) { - ref_clk.rate = ref_clk_rate; - aux_clkin.rate = aux_clkin_rate; - davinci_clk_init(dm646x_clks); - davinci_timer_init(); + void __iomem *pll1, *psc; + struct clk *clk; + + clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate); + clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate); + + pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K); + dm646x_pll1_init(NULL, pll1, NULL); + + psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K); + dm646x_psc_init(NULL, psc); + + clk = clk_get(NULL, "timer0"); + + davinci_timer_init(clk); +} + +static struct resource dm646x_pll2_resources[] = { + { + .start = DAVINCI_PLL2_BASE, + .end = DAVINCI_PLL2_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm646x_pll2_device = { + .name = "dm646x-pll2", + .id = -1, + .resource = dm646x_pll2_resources, + .num_resources = ARRAY_SIZE(dm646x_pll2_resources), +}; + +void __init dm646x_register_clocks(void) +{ + /* PLL1 and PSC are registered in dm646x_init_time() */ + platform_device_register(&dm646x_pll2_device); } static int __init dm646x_init_devices(void) diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index 3e8af6a0b64c..42ed4f2f5ce4 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -15,9 +15,6 @@ struct clk; -extern int clk_register(struct clk *clk); -extern void clk_unregister(struct clk *clk); - int davinci_clk_reset_assert(struct clk *c); int davinci_clk_reset_deassert(struct clk *c); diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index f0d5e858f158..b577e13a9c23 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -12,11 +12,12 @@ #ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H #define __ARCH_ARM_MACH_DAVINCI_COMMON_H +#include #include #include #include -extern void davinci_timer_init(void); +void davinci_timer_init(struct clk *clk); extern void davinci_irq_init(void); extern void __iomem *davinci_intc_base; @@ -53,8 +54,6 @@ struct davinci_soc_info { u32 jtag_id_reg; struct davinci_id *ids; unsigned long ids_num; - u32 *psc_bases; - unsigned long psc_bases_num; u32 pinmux_base; const struct mux_config *pinmux_pins; unsigned long pinmux_pins_num; @@ -82,12 +81,6 @@ extern void davinci_common_init(const struct davinci_soc_info *soc_info); extern void davinci_init_ide(void); void davinci_init_late(void); -#ifdef CONFIG_DAVINCI_RESET_CLOCKS -int davinci_clk_disable_unused(void); -#else -static inline int davinci_clk_disable_unused(void) { return 0; } -#endif - #ifdef CONFIG_CPU_FREQ int davinci_cpufreq_init(void); #else diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 9fd6d0125762..ab4a57f433f4 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -89,9 +89,11 @@ extern unsigned int da850_max_speed; void da830_init(void); void da830_init_time(void); +void da830_register_clocks(void); void da850_init(void); void da850_init_time(void); +void da850_register_clocks(void); int da830_register_edma(struct edma_rsv_info *rsv); int da850_register_edma(struct edma_rsv_info *rsv[2]); @@ -101,9 +103,7 @@ int da8xx_register_watchdog(void); int da8xx_register_usb_phy(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); -int da8xx_register_usb_refclkin(int rate); -int da8xx_register_usb20_phy_clk(bool use_usb_refclkin); -int da8xx_register_usb11_phy_clk(bool use_usb_refclkin); +int da8xx_register_usb_phy_clocks(void); int da850_register_sata_refclk(int rate); int da8xx_register_emac(void); int da8xx_register_uio_pruss(void); diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c index 78eac2c0c146..e251fd593bfd 100644 --- a/arch/arm/mach-davinci/pm_domain.c +++ b/arch/arm/mach-davinci/pm_domain.c @@ -13,6 +13,7 @@ #include #include #include +#include static struct dev_pm_domain davinci_pm_domain = { .ops = { @@ -28,6 +29,10 @@ static struct pm_clk_notifier_block platform_bus_notifier = { static int __init davinci_pm_runtime_init(void) { + if (of_have_populated_dt()) + return 0; + + /* Use pm_clk as fallback if we're not using genpd. */ pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); return 0; diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c deleted file mode 100644 index e5dc6bfde5f3..000000000000 --- a/arch/arm/mach-davinci/psc.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * TI DaVinci Power and Sleep Controller (PSC) - * - * Copyright (C) 2006 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#include -#include -#include - -#include -#include "psc.h" - -#include "clock.h" - -/* Return nonzero iff the domain's clock is active */ -int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) -{ - void __iomem *psc_base; - u32 mdstat; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { - pr_warn("PSC: Bad psc data: 0x%x[%d]\n", - (int)soc_info->psc_bases, ctlr); - return 0; - } - - psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); - mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); - iounmap(psc_base); - - /* if clocked, state can be "Enable" or "SyncReset" */ - return mdstat & BIT(12); -} - -/* Control "reset" line associated with PSC domain */ -void davinci_psc_reset(unsigned int ctlr, unsigned int id, bool reset) -{ - u32 mdctl; - void __iomem *psc_base; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { - pr_warn("PSC: Bad psc data: 0x%x[%d]\n", - (int)soc_info->psc_bases, ctlr); - return; - } - - psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); - - mdctl = readl(psc_base + MDCTL + 4 * id); - if (reset) - mdctl &= ~MDCTL_LRST; - else - mdctl |= MDCTL_LRST; - writel(mdctl, psc_base + MDCTL + 4 * id); - - iounmap(psc_base); -} - -/* Enable or disable a PSC domain */ -void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, bool enable, u32 flags) -{ - u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl; - void __iomem *psc_base; - struct davinci_soc_info *soc_info = &davinci_soc_info; - u32 next_state = PSC_STATE_ENABLE; - - if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { - pr_warn("PSC: Bad psc data: 0x%x[%d]\n", - (int)soc_info->psc_bases, ctlr); - return; - } - - psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); - - if (!enable) { - if (flags & PSC_SWRSTDISABLE) - next_state = PSC_STATE_SWRSTDISABLE; - else - next_state = PSC_STATE_DISABLE; - } - - mdctl = __raw_readl(psc_base + MDCTL + 4 * id); - mdctl &= ~MDSTAT_STATE_MASK; - mdctl |= next_state; - if (flags & PSC_FORCE) - mdctl |= MDCTL_FORCE; - __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - - pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain); - if ((pdstat & PDSTAT_STATE_MASK) == 0) { - pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); - pdctl |= PDCTL_NEXT; - __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); - - ptcmd = 1 << domain; - __raw_writel(ptcmd, psc_base + PTCMD); - - do { - epcpr = __raw_readl(psc_base + EPCPR); - } while ((((epcpr >> domain) & 1) == 0)); - - pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); - pdctl |= PDCTL_EPCGOOD; - __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); - } else { - ptcmd = 1 << domain; - __raw_writel(ptcmd, psc_base + PTCMD); - } - - do { - ptstat = __raw_readl(psc_base + PTSTAT); - } while (!(((ptstat >> domain) & 1) == 0)); - - do { - mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); - } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); - - iounmap(psc_base); -} diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h index 8af9f09fc10c..68cd9d3fc82b 100644 --- a/arch/arm/mach-davinci/psc.h +++ b/arch/arm/mach-davinci/psc.h @@ -27,8 +27,6 @@ #ifndef __ASM_ARCH_PSC_H #define __ASM_ARCH_PSC_H -#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 - /* Power and Sleep Controller (PSC) Domains */ #define DAVINCI_GPSC_ARMDOMAIN 0 #define DAVINCI_GPSC_DSPDOMAIN 1 @@ -206,14 +204,4 @@ #define PDCTL_NEXT BIT(0) #define PDCTL_EPCGOOD BIT(8) -#ifndef __ASSEMBLER__ - -extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); -extern void davinci_psc_reset(unsigned int ctlr, unsigned int id, - bool reset); -extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, bool enable, u32 flags); - -#endif - #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 1bb991ad9c1e..5a6de5368ab0 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -27,8 +28,6 @@ #include #include -#include "clock.h" - static struct clock_event_device clockevent_davinci; static unsigned int davinci_clock_tick_rate; @@ -334,10 +333,8 @@ static struct clock_event_device clockevent_davinci = { .set_state_oneshot = davinci_set_oneshot, }; - -void __init davinci_timer_init(void) +void __init davinci_timer_init(struct clk *timer_clk) { - struct clk *timer_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; unsigned int clockevent_id; unsigned int clocksource_id; @@ -373,7 +370,6 @@ void __init davinci_timer_init(void) } } - timer_clk = clk_get(NULL, "timer0"); BUG_ON(IS_ERR(timer_clk)); clk_prepare_enable(timer_clk); @@ -402,3 +398,17 @@ void __init davinci_timer_init(void) for (i=0; i< ARRAY_SIZE(timers); i++) timer32_config(&timers[i]); } + +static int __init of_davinci_timer_init(struct device_node *np) +{ + struct clk *clk; + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + davinci_timer_init(clk); + + return 0; +} +TIMER_OF_DECLARE(davinci_timer, "ti,da830-timer", of_davinci_timer_init); diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index 50445f0e98de..c17ce66a3d95 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -2,29 +2,30 @@ /* * DA8xx USB */ -#include +#include #include #include #include #include +#include #include +#include #include #include #include #include -#include #include #include #include #include -#include "clock.h" - #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 +#ifndef CONFIG_COMMON_CLK static struct clk *usb20_clk; +#endif static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata; @@ -81,11 +82,6 @@ static struct platform_device da8xx_usb20_dev = { .name = "musb-da8xx", .id = -1, .dev = { - /* - * Setting init_name so that clock lookup will work in - * usb20_phy_clk_enable() even if this device is not registered. - */ - .init_name = "musb-da8xx", .platform_data = &usb_data, .dma_mask = &usb_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), @@ -134,229 +130,17 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata) return platform_device_register(&da8xx_usb11_device); } -static struct clk usb_refclkin = { - .name = "usb_refclkin", - .set_rate = davinci_simple_set_rate, +static struct platform_device da8xx_usb_phy_clks_device = { + .name = "da830-usb-phy-clks", + .id = -1, }; -static struct clk_lookup usb_refclkin_lookup = - CLK(NULL, "usb_refclkin", &usb_refclkin); - -/** - * da8xx_register_usb_refclkin - register USB_REFCLKIN clock - * - * @rate: The clock rate in Hz - * - * This clock is only needed if the board provides an external USB_REFCLKIN - * signal, in which case it will be used as the parent of usb20_phy_clk and/or - * usb11_phy_clk. - */ -int __init da8xx_register_usb_refclkin(int rate) +int __init da8xx_register_usb_phy_clocks(void) { - int ret; + struct da8xx_cfgchip_clk_platform_data pdata; - usb_refclkin.rate = rate; - ret = clk_register(&usb_refclkin); - if (ret) - return ret; + pdata.cfgchip = da8xx_get_cfgchip(); + da8xx_usb_phy_clks_device.dev.platform_data = &pdata; - clkdev_add(&usb_refclkin_lookup); - - return 0; -} - -static void usb20_phy_clk_enable(struct clk *clk) -{ - u32 val; - u32 timeout = 500000; /* 500 msec */ - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */ - davinci_clk_enable(usb20_clk); - - /* - * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1 - * host may use the PLL clock without USB 2.0 OTG being used. - */ - val &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN); - val |= CFGCHIP2_PHY_PLLON; - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - while (--timeout) { - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - if (val & CFGCHIP2_PHYCLKGD) - goto done; - udelay(1); - } - - pr_err("Timeout waiting for USB 2.0 PHY clock good\n"); -done: - davinci_clk_disable(usb20_clk); -} - -static void usb20_phy_clk_disable(struct clk *clk) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - val |= CFGCHIP2_PHYPWRDN; - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); -} - -static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* Set the mux depending on the parent clock. */ - if (parent == &usb_refclkin) { - val &= ~CFGCHIP2_USB2PHYCLKMUX; - } else if (strcmp(parent->name, "pll0_aux_clk") == 0) { - val |= CFGCHIP2_USB2PHYCLKMUX; - } else { - pr_err("Bad parent on USB 2.0 PHY clock\n"); - return -EINVAL; - } - - /* reference frequency also comes from parent clock */ - val &= ~CFGCHIP2_REFFREQ_MASK; - switch (clk_get_rate(parent)) { - case 12000000: - val |= CFGCHIP2_REFFREQ_12MHZ; - break; - case 13000000: - val |= CFGCHIP2_REFFREQ_13MHZ; - break; - case 19200000: - val |= CFGCHIP2_REFFREQ_19_2MHZ; - break; - case 20000000: - val |= CFGCHIP2_REFFREQ_20MHZ; - break; - case 24000000: - val |= CFGCHIP2_REFFREQ_24MHZ; - break; - case 26000000: - val |= CFGCHIP2_REFFREQ_26MHZ; - break; - case 38400000: - val |= CFGCHIP2_REFFREQ_38_4MHZ; - break; - case 40000000: - val |= CFGCHIP2_REFFREQ_40MHZ; - break; - case 48000000: - val |= CFGCHIP2_REFFREQ_48MHZ; - break; - default: - pr_err("Bad parent clock rate on USB 2.0 PHY clock\n"); - return -EINVAL; - } - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - return 0; -} - -static struct clk usb20_phy_clk = { - .name = "usb0_clk48", - .clk_enable = usb20_phy_clk_enable, - .clk_disable = usb20_phy_clk_disable, - .set_parent = usb20_phy_clk_set_parent, -}; - -static struct clk_lookup usb20_phy_clk_lookup = - CLK("da8xx-usb-phy", "usb0_clk48", &usb20_phy_clk); - -/** - * da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock - * - * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true - * or "pll0_aux" if false. - */ -int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin) -{ - struct clk *parent; - int ret; - - usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20"); - ret = PTR_ERR_OR_ZERO(usb20_clk); - if (ret) - return ret; - - parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux"); - ret = PTR_ERR_OR_ZERO(parent); - if (ret) { - clk_put(usb20_clk); - return ret; - } - - usb20_phy_clk.parent = parent; - ret = clk_register(&usb20_phy_clk); - if (!ret) - clkdev_add(&usb20_phy_clk_lookup); - - clk_put(parent); - - return ret; -} - -static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent) -{ - u32 val; - - val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* Set the USB 1.1 PHY clock mux based on the parent clock. */ - if (parent == &usb20_phy_clk) { - val &= ~CFGCHIP2_USB1PHYCLKMUX; - } else if (parent == &usb_refclkin) { - val |= CFGCHIP2_USB1PHYCLKMUX; - } else { - pr_err("Bad parent on USB 1.1 PHY clock\n"); - return -EINVAL; - } - - writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - return 0; -} - -static struct clk usb11_phy_clk = { - .name = "usb1_clk48", - .set_parent = usb11_phy_clk_set_parent, -}; - -static struct clk_lookup usb11_phy_clk_lookup = - CLK("da8xx-usb-phy", "usb1_clk48", &usb11_phy_clk); - -/** - * da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock - * - * @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true - * or "usb0_clk48" if false. - */ -int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin) -{ - struct clk *parent; - int ret = 0; - - if (use_usb_refclkin) - parent = clk_get(NULL, "usb_refclkin"); - else - parent = clk_get(&da8xx_usb_phy.dev, "usb0_clk48"); - if (IS_ERR(parent)) - return PTR_ERR(parent); - - usb11_phy_clk.parent = parent; - ret = clk_register(&usb11_phy_clk); - if (!ret) - clkdev_add(&usb11_phy_clk_lookup); - - clk_put(parent); - - return ret; + return platform_device_register(&da8xx_usb_phy_clks_device); } diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index f4b6c93a7fd0..865dcc4c3181 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -190,8 +190,6 @@ static void __init exynos_dt_fixup(void) } DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") - /* Maintainer: Thomas Abraham */ - /* Maintainer: Kukjin Kim */ .l2c_aux_val = 0x3c400001, .l2c_aux_mask = 0xc20fffff, .smp = smp_ops(exynos_smp_ops), diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index f3384e3a675d..7ead3acd6fa4 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -203,6 +203,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node, NULL); if (!domain) { iounmap(pmu_base_addr); + pmu_base_addr = NULL; return -ENOMEM; } diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index a129aae72602..909bb2493781 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -148,13 +148,20 @@ static int hi3xxx_hotplug_init(void) struct device_node *node; node = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); - if (node) { - ctrl_base = of_iomap(node, 0); - id = HI3620_CTRL; - return 0; + if (!node) { + id = ERROR_CTRL; + return -ENOENT; } - id = ERROR_CTRL; - return -ENOENT; + + ctrl_base = of_iomap(node, 0); + of_node_put(node); + if (!ctrl_base) { + id = ERROR_CTRL; + return -ENOMEM; + } + + id = HI3620_CTRL; + return 0; } void hi3xxx_set_cpu(int cpu, bool enable) @@ -173,11 +180,15 @@ static bool hix5hd2_hotplug_init(void) struct device_node *np; np = of_find_compatible_node(NULL, NULL, "hisilicon,cpuctrl"); - if (np) { - ctrl_base = of_iomap(np, 0); - return true; - } - return false; + if (!np) + return false; + + ctrl_base = of_iomap(np, 0); + of_node_put(np); + if (!ctrl_base) + return false; + + return true; } void hix5hd2_set_cpu(int cpu, bool enable) @@ -219,10 +230,10 @@ void hip01_set_cpu(int cpu, bool enable) if (!ctrl_base) { np = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl"); - if (np) - ctrl_base = of_iomap(np, 0); - else - BUG(); + BUG_ON(!np); + ctrl_base = of_iomap(np, 0); + of_node_put(np); + BUG_ON(!ctrl_base); } if (enable) { diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 6f4232384774..abc337111eff 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -523,18 +523,6 @@ config SOC_IMX6UL help This enables support for Freescale i.MX6 UltraLite processor. -config SOC_IMX7D - bool "i.MX7 Dual support" - select PINCTRL_IMX7D - select ARM_GIC - select HAVE_ARM_ARCH_TIMER - select HAVE_IMX_ANATOP - select HAVE_IMX_MMDC - select HAVE_IMX_SRC - select IMX_GPCV2 - help - This enables support for Freescale i.MX7 Dual processor. - config SOC_LS1021A bool "Freescale LS1021A support" select ARM_GIC @@ -549,6 +537,27 @@ comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M +config SOC_IMX7D_CA7 + bool + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select HAVE_IMX_ANATOP + select HAVE_IMX_MMDC + select HAVE_IMX_SRC + select IMX_GPCV2 + +config SOC_IMX7D_CM4 + bool + select ARMV7M_SYSTICK + +config SOC_IMX7D + bool "i.MX7 Dual support" + select PINCTRL_IMX7D + select SOC_IMX7D_CA7 if ARCH_MULTI_V7 + select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M + help + This enables support for Freescale i.MX7 Dual processor. + config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC if ARCH_MULTI_V7 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 2327e3e876d8..bae179af21f6 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -26,7 +26,7 @@ ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o -obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sl.o +obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sx.o obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o endif @@ -81,7 +81,8 @@ obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SLL) += mach-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o -obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o +obj-$(CONFIG_SOC_IMX7D_CA7) += mach-imx7d.o +obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o ifeq ($(CONFIG_SUSPEND),y) AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index c8d68e918b2f..423dd76bb6b8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -38,7 +38,6 @@ void imx21_soc_init(void); void imx27_soc_init(void); void imx31_soc_init(void); void imx35_soc_init(void); -void epit_timer_init(void __iomem *base, int irq); int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx27_clocks_init(unsigned long fref); int mx31_clocks_init(unsigned long fref); @@ -58,10 +57,12 @@ struct device *imx_soc_device_init(void); void imx6_enable_rbc(bool enable); void imx_gpc_check_dt(void); void imx_gpc_set_arm_power_in_lpm(bool power_off); +void imx_gpc_set_l2_mem_power_in_lpm(bool power_off); void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); void imx25_pm_init(void); void imx27_pm_init(void); +void imx5_pmu_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index 4f2d1c772f85..e210bac18840 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -117,3 +117,48 @@ int mx53_revision(void) return mx5_cpu_rev; } EXPORT_SYMBOL(mx53_revision); + +#define ARM_GPC 0x4 +#define DBGEN BIT(16) + +/* + * This enables the DBGEN bit in ARM_GPC register, which is + * required for accessing some performance counter features. + * Technically it is only required while perf is used, but to + * keep the source code simple we just enable it all the time + * when the kernel configuration allows using the feature. + */ +void __init imx5_pmu_init(void) +{ + void __iomem *tigerp_base; + struct device_node *np; + u32 gpc; + + if (!IS_ENABLED(CONFIG_ARM_PMU)) + return; + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a8-pmu"); + if (!np) + return; + + if (!of_property_read_bool(np, "secure-reg-access")) + goto exit; + + of_node_put(np); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-tigerp"); + if (!np) + return; + + tigerp_base = of_iomap(np, 0); + if (!tigerp_base) + goto exit; + + gpc = readl_relaxed(tigerp_base + ARM_GPC); + gpc |= DBGEN; + writel_relaxed(gpc, tigerp_base + ARM_GPC); + iounmap(tigerp_base); +exit: + of_node_put(np); + +} diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 32969f34486a..c6b1bf97a6c1 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -68,6 +68,7 @@ void __init imx_aips_allow_unprivileged_access( for_each_compatible_node(np, NULL, compat) { aips_base_addr = of_iomap(np, 0); + WARN_ON(!aips_base_addr); imx_set_aips(aips_base_addr); } } diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index fa8ead145d17..8d866fb674a8 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -12,7 +12,6 @@ #include "common.h" #include "cpuidle.h" -#include "hardware.h" static int imx6sl_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -22,11 +21,9 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev, * Software workaround for ERR005311, see function * description for details. */ - if (cpu_is_imx6sl()) - imx6sl_set_wait_clk(true); + imx6sl_set_wait_clk(true); cpu_do_idle(); - if (cpu_is_imx6sl()) - imx6sl_set_wait_clk(false); + imx6sl_set_wait_clk(false); imx6_set_lpm(WAIT_CLOCKED); return index; diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index d0f14b761ff7..243a108a940b 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -103,6 +103,7 @@ int __init imx6sx_cpuidle_init(void) { imx6_set_int_mem_clk_lpm(true); imx6_enable_rbc(false); + imx_gpc_set_l2_mem_power_in_lpm(false); /* * set ARM power up/down timing to the fastest, * sw2iso and sw can be set to one 32K cycle = 31us diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index de535cb679b3..e11159d40fb8 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -20,6 +20,7 @@ #include "common.h" #include "hardware.h" +#define GPC_CNTR 0x0 #define GPC_IMR1 0x008 #define GPC_PGC_CPU_PDN 0x2a0 #define GPC_PGC_CPU_PUPSCR 0x2a4 @@ -27,6 +28,8 @@ #define GPC_PGC_SW2ISO_SHIFT 0x8 #define GPC_PGC_SW_SHIFT 0x0 +#define GPC_CNTR_L2_PGE_SHIFT 22 + #define IMR_NUM 4 #define GPC_MAX_IRQS (IMR_NUM * 32) @@ -51,6 +54,17 @@ void imx_gpc_set_arm_power_in_lpm(bool power_off) writel_relaxed(power_off, gpc_base + GPC_PGC_CPU_PDN); } +void imx_gpc_set_l2_mem_power_in_lpm(bool power_off) +{ + u32 val; + + val = readl_relaxed(gpc_base + GPC_CNTR); + val &= ~(1 << GPC_CNTR_L2_PGE_SHIFT); + if (power_off) + val |= 1 << GPC_CNTR_L2_PGE_SHIFT; + writel_relaxed(val, gpc_base + GPC_CNTR); +} + void imx_gpc_pre_suspend(bool arm_power_off) { void __iomem *reg_imr1 = gpc_base + GPC_IMR1; diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index 668d74b72511..9d9640aaf858 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -9,35 +9,17 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include -#include -#include #include -#include - #include "common.h" -#include "mx31.h" static const char * const imx31_dt_board_compat[] __initconst = { "fsl,imx31", NULL }; -/* FIXME: replace with DT binding */ -static const struct resource imx31_rnga_res[] __initconst = { - DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K), -}; - -static void __init imx31_dt_mach_init(void) -{ - platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res, - ARRAY_SIZE(imx31_rnga_res)); -} - DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .init_machine = imx31_dt_mach_init, .dt_compat = imx31_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index 3835b6a3423c..c7169c2f94c4 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -48,11 +49,38 @@ static void __init imx51_ipu_mipi_setup(void) iounmap(hsc_addr); } +static void __init imx51_m4if_setup(void) +{ + void __iomem *m4if_base; + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx51-m4if"); + if (!np) + return; + + m4if_base = of_iomap(np, 0); + if (!m4if_base) { + pr_err("Unable to map M4IF registers\n"); + return; + } + + /* + * Configure VPU and IPU with higher priorities + * in order to avoid artifacts during video playback + */ + writel_relaxed(0x00000203, m4if_base + 0x40); + writel_relaxed(0x00000000, m4if_base + 0x44); + writel_relaxed(0x00120125, m4if_base + 0x9c); + writel_relaxed(0x001901A3, m4if_base + 0x48); + iounmap(m4if_base); +} + static void __init imx51_dt_init(void) { imx51_ipu_mipi_setup(); imx_src_init(); - + imx51_m4if_setup(); + imx5_pmu_init(); imx_aips_allow_unprivileged_access("fsl,imx51-aipstz"); } diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 07c2e8dca494..5ec7100737e8 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -31,7 +31,7 @@ static void __init imx53_init_early(void) static void __init imx53_dt_init(void) { imx_src_init(); - + imx5_pmu_init(); imx_aips_allow_unprivileged_access("fsl,imx53-aipstz"); } diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index c7a1ef180dda..99be4225297a 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -42,7 +42,10 @@ static void __init imx6sl_init_late(void) if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); - imx6sl_cpuidle_init(); + if (IS_ENABLED(CONFIG_SOC_IMX6SL) && cpu_is_imx6sl()) + imx6sl_cpuidle_init(); + else if (IS_ENABLED(CONFIG_SOC_IMX6SLL)) + imx6sx_cpuidle_init(); } static void __init imx6sl_init_machine(void) diff --git a/arch/arm/mach-imx/mach-imx7d-cm4.c b/arch/arm/mach-imx/mach-imx7d-cm4.c new file mode 100644 index 000000000000..0800b5891d2a --- /dev/null +++ b/arch/arm/mach-imx/mach-imx7d-cm4.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 Pengutronix, Oleksij Rempel + */ + +#include +#include +#include + +static const char * const imx7d_cm4_dt_compat[] __initconst = { + "fsl,imx7d-cm4", + NULL, +}; + +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual Cortex-M4 (Device Tree)") + .dt_compat = imx7d_cm4_dt_compat, + .restart = armv7m_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 017539dd712b..b08e407d8d96 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -130,6 +130,13 @@ static const u32 imx6sl_mmdc_io_offset[] __initconst = { 0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */ }; +static const u32 imx6sll_mmdc_io_offset[] __initconst = { + 0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */ + 0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */ + 0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */ + 0x2a4, 0x2a8, /* SDCKE0, SDCKE1*/ +}; + static const u32 imx6sx_mmdc_io_offset[] __initconst = { 0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */ 0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */ @@ -175,6 +182,16 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { .mmdc_io_offset = imx6sl_mmdc_io_offset, }; +static const struct imx6_pm_socdata imx6sll_pm_data __initconst = { + .mmdc_compat = "fsl,imx6sll-mmdc", + .src_compat = "fsl,imx6sll-src", + .iomuxc_compat = "fsl,imx6sll-iomuxc", + .gpc_compat = "fsl,imx6sll-gpc", + .pl310_compat = "arm,pl310-cache", + .mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset), + .mmdc_io_offset = imx6sll_mmdc_io_offset, +}; + static const struct imx6_pm_socdata imx6sx_pm_data __initconst = { .mmdc_compat = "fsl,imx6sx-mmdc", .src_compat = "fsl,imx6sx-src", @@ -296,7 +313,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) if (cpu_is_imx6sl()) val |= BM_CLPCR_BYPASS_PMIC_READY; if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || - cpu_is_imx6ull()) + cpu_is_imx6ull() || cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -314,7 +331,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) if (cpu_is_imx6sl() || cpu_is_imx6sx()) val |= BM_CLPCR_BYPASS_PMIC_READY; if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() || - cpu_is_imx6ull()) + cpu_is_imx6ull() || cpu_is_imx6sll()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -631,7 +648,17 @@ void __init imx6dl_pm_init(void) void __init imx6sl_pm_init(void) { - imx6_pm_common_init(&imx6sl_pm_data); + struct regmap *gpr; + + if (cpu_is_imx6sl()) { + imx6_pm_common_init(&imx6sl_pm_data); + } else { + imx6_pm_common_init(&imx6sll_pm_data); + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (!IS_ERR(gpr)) + regmap_update_bits(gpr, IOMUXC_GPR5, + IMX6SLL_GPR5_AFCG_X_BYPASS_MASK, 0); + } } void __init imx6sx_pm_init(void) diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index 4ffbbd217e82..c130497dc6cc 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -35,6 +35,8 @@ #define AXP_BOOTROM_BASE 0xfff00000 #define AXP_BOOTROM_SIZE 0x100000 +static struct clk *boot_cpu_clk; + static struct clk *get_cpu_clk(int cpu) { struct clk *cpu_clk; @@ -48,30 +50,6 @@ static struct clk *get_cpu_clk(int cpu) return cpu_clk; } -static void set_secondary_cpu_clock(unsigned int cpu) -{ - int thiscpu; - unsigned long rate; - struct clk *cpu_clk; - - thiscpu = get_cpu(); - - cpu_clk = get_cpu_clk(thiscpu); - if (!cpu_clk) - goto out; - clk_prepare_enable(cpu_clk); - rate = clk_get_rate(cpu_clk); - - cpu_clk = get_cpu_clk(cpu); - if (!cpu_clk) - goto out; - clk_set_rate(cpu_clk, rate); - clk_prepare_enable(cpu_clk); - -out: - put_cpu(); -} - static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) { int ret, hw_cpu; @@ -79,7 +57,6 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) pr_info("Booting CPU %d\n", cpu); hw_cpu = cpu_logical_map(cpu); - set_secondary_cpu_clock(hw_cpu); mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); /* @@ -122,6 +99,19 @@ static void __init armada_xp_smp_init_cpus(void) panic("Invalid number of CPUs in DT\n"); } +static int armada_xp_sync_secondary_clk(unsigned int cpu) +{ + struct clk *cpu_clk = get_cpu_clk(cpu); + + if (!cpu_clk || !boot_cpu_clk) + return 0; + + clk_prepare_enable(cpu_clk); + clk_set_rate(cpu_clk, clk_get_rate(boot_cpu_clk)); + + return 0; +} + static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) { struct device_node *node; @@ -131,6 +121,14 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) flush_cache_all(); set_cpu_coherent(); + boot_cpu_clk = get_cpu_clk(smp_processor_id()); + if (boot_cpu_clk) { + clk_prepare_enable(boot_cpu_clk); + cpuhp_setup_state_nocalls(CPUHP_AP_ARM_MVEBU_SYNC_CLOCKS, + "arm/mvebu/sync_clocks:online", + armada_xp_sync_secondary_clk, NULL); + } + /* * In order to boot the secondary CPUs we need to ensure * the bootROM is mapped at the correct address. @@ -223,7 +221,6 @@ static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle) int ret, hw_cpu; hw_cpu = cpu_logical_map(cpu); - set_secondary_cpu_clock(hw_cpu); mv98dx3236_resume_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 27a78c80e5b1..73d5d72dfc3e 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -116,8 +116,8 @@ void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); } -extern unsigned char mvebu_boot_wa_start; -extern unsigned char mvebu_boot_wa_end; +extern unsigned char mvebu_boot_wa_start[]; +extern unsigned char mvebu_boot_wa_end[]; /* * This function sets up the boot address workaround needed for SMP @@ -130,7 +130,7 @@ int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, phys_addr_t resume_addr_reg) { void __iomem *sram_virt_base; - u32 code_len = &mvebu_boot_wa_end - &mvebu_boot_wa_start; + u32 code_len = mvebu_boot_wa_end - mvebu_boot_wa_start; mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute, diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index bf608441b357..ddc27638ba2a 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -14,11 +14,12 @@ */ #include +#include + #include - #include -#include +#include "ams-delta-fiq.h" #include "iomap.h" #include "soc.h" diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index d7ca9e2b40d2..b0dc7ddf5877 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -13,17 +13,20 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ -#include +#include +#include #include #include #include #include +#include +#include #include #include -#include +#include "ams-delta-fiq.h" static struct fiq_handler fh = { .name = "ams-delta-fiq" @@ -34,20 +37,24 @@ static struct fiq_handler fh = { * The FIQ and IRQ isrs can both read and write it. * It is structured as a header section several 32bit slots, * followed by the circular buffer where the FIQ isr stores - * keystrokes received from the qwerty keyboard. - * See ams-delta-fiq.h for details of offsets. + * keystrokes received from the qwerty keyboard. See + * for details of offsets. */ -unsigned int fiq_buffer[1024]; -EXPORT_SYMBOL(fiq_buffer); +static unsigned int fiq_buffer[1024]; +static struct irq_chip *irq_chip; +static struct irq_data *irq_data[16]; static unsigned int irq_counter[16]; +static const char *pin_name[16] __initconst = { + [AMS_DELTA_GPIO_PIN_KEYBRD_DATA] = "keybrd_data", + [AMS_DELTA_GPIO_PIN_KEYBRD_CLK] = "keybrd_clk", +}; + static irqreturn_t deferred_fiq(int irq, void *dev_id) { + struct irq_data *d; int gpio, irq_num, fiq_count; - struct irq_chip *irq_chip; - - irq_chip = irq_get_chip(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); /* * For each handled GPIO interrupt, keep calling its interrupt handler @@ -55,24 +62,21 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) */ for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK; gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) { - irq_num = gpio_to_irq(gpio); + d = irq_data[gpio]; + irq_num = d->irq; fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio]; if (irq_counter[gpio] < fiq_count && gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) { - struct irq_data *d = irq_get_irq_data(irq_num); - /* * handle_simple_irq() that OMAP GPIO edge * interrupts default to since commit 80ac93c27441 * requires interrupt already acked and unmasked. */ - if (irq_chip) { - if (irq_chip->irq_ack) - irq_chip->irq_ack(d); - if (irq_chip->irq_unmask) - irq_chip->irq_unmask(d); - } + if (irq_chip->irq_ack) + irq_chip->irq_ack(d); + if (irq_chip->irq_unmask) + irq_chip->irq_unmask(d); } for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++) generic_handle_irq(irq_num); @@ -80,14 +84,56 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id) return IRQ_HANDLED; } -void __init ams_delta_init_fiq(void) +void __init ams_delta_init_fiq(struct gpio_chip *chip, + struct platform_device *serio) { + struct gpio_desc *gpiod, *data = NULL, *clk = NULL; void *fiqhandler_start; unsigned int fiqhandler_length; struct pt_regs FIQ_regs; unsigned long val, offset; int i, retval; + /* Store irq_chip location for IRQ handler use */ + irq_chip = chip->irq.chip; + if (!irq_chip) { + pr_err("%s: GPIO chip %s is missing IRQ function\n", __func__, + chip->label); + return; + } + + for (i = 0; i < ARRAY_SIZE(irq_data); i++) { + gpiod = gpiochip_request_own_desc(chip, i, pin_name[i]); + if (IS_ERR(gpiod)) { + pr_err("%s: failed to get GPIO pin %d (%ld)\n", + __func__, i, PTR_ERR(gpiod)); + return; + } + /* Store irq_data location for IRQ handler use */ + irq_data[i] = irq_get_irq_data(gpiod_to_irq(gpiod)); + + /* + * FIQ handler takes full control over serio data and clk GPIO + * pins. Initiaize them and keep requested so nobody can + * interfere. Fail if any of those two couldn't be requested. + */ + switch (i) { + case AMS_DELTA_GPIO_PIN_KEYBRD_DATA: + data = gpiod; + gpiod_direction_input(data); + break; + case AMS_DELTA_GPIO_PIN_KEYBRD_CLK: + clk = gpiod; + gpiod_direction_input(clk); + break; + default: + gpiochip_free_own_desc(gpiod); + break; + } + } + if (!data || !clk) + goto out_gpio; + fiqhandler_start = &qwerty_fiqin_start; fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start; pr_info("Installing fiq handler from %p, length 0x%x\n", @@ -97,7 +143,7 @@ void __init ams_delta_init_fiq(void) if (retval) { pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n", retval); - return; + goto out_gpio; } retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq, @@ -105,7 +151,7 @@ void __init ams_delta_init_fiq(void) if (retval < 0) { pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); release_fiq(&fh); - return; + goto out_gpio; } /* * Since no set_type() method is provided by OMAP irq chip, @@ -155,4 +201,29 @@ void __init ams_delta_init_fiq(void) offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4; val = omap_readl(OMAP_IH1_BASE + offset) | 1; omap_writel(val, OMAP_IH1_BASE + offset); + + /* Initialize serio device IRQ resource and platform_data */ + serio->resource[0].start = gpiod_to_irq(clk); + serio->resource[0].end = serio->resource[0].start; + serio->dev.platform_data = fiq_buffer; + + /* + * Since FIQ handler performs handling of GPIO registers for + * "keybrd_clk" IRQ pin, ams_delta_serio driver used to set + * handle_simple_irq() as active IRQ handler for that pin to avoid + * bad interaction with gpio-omap driver. This is no longer needed + * as handle_simple_irq() is now the default handler for OMAP GPIO + * edge interrupts. + * This comment replaces the obsolete code which has been removed + * from the ams_delta_serio driver and stands here only as a reminder + * of that dependency on gpio-omap driver behavior. + */ + + return; + +out_gpio: + if (data) + gpiochip_free_own_desc(data); + if (clk) + gpiochip_free_own_desc(clk); } diff --git a/arch/arm/mach-omap1/ams-delta-fiq.h b/arch/arm/mach-omap1/ams-delta-fiq.h new file mode 100644 index 000000000000..fd76df3cce37 --- /dev/null +++ b/arch/arm/mach-omap1/ams-delta-fiq.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * arch/arm/mach-omap1/ams-delta-fiq.h + * + * Taken from the original Amstrad modifications to fiq.h + * + * Copyright (c) 2004 Amstrad Plc + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __AMS_DELTA_FIQ_H +#define __AMS_DELTA_FIQ_H + +#include + +/* + * Interrupt number used for passing control from FIQ to IRQ. + * IRQ12, described as reserved, has been selected. + */ +#define INT_DEFERRED_FIQ INT_1510_RES12 +/* + * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to. + */ +#if (INT_DEFERRED_FIQ < IH2_BASE) +#define DEFERRED_FIQ_IH_BASE OMAP_IH1_BASE +#else +#define DEFERRED_FIQ_IH_BASE OMAP_IH2_BASE +#endif + +#ifndef __ASSEMBLER__ +extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end; + +extern void __init ams_delta_init_fiq(struct gpio_chip *chip, + struct platform_device *pdev); +#endif + +#endif diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 80f54cb54276..dd28d2614d7f 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -41,10 +41,10 @@ #include #include -#include #include "camera.h" #include +#include "ams-delta-fiq.h" #include "iomap.h" #include "common.h" @@ -179,7 +179,10 @@ static struct resource latch1_resources[] = { }, }; +#define LATCH1_LABEL "latch1" + static struct bgpio_pdata latch1_pdata = { + .label = LATCH1_LABEL, .base = LATCH1_GPIO_BASE, .ngpio = LATCH1_NGPIO, }; @@ -194,6 +197,15 @@ static struct platform_device latch1_gpio_device = { }, }; +#define LATCH1_PIN_LED_CAMERA 0 +#define LATCH1_PIN_LED_ADVERT 1 +#define LATCH1_PIN_LED_MAIL 2 +#define LATCH1_PIN_LED_HANDSFREE 3 +#define LATCH1_PIN_LED_VOICEMAIL 4 +#define LATCH1_PIN_LED_VOICE 5 +#define LATCH1_PIN_DOCKIT1 6 +#define LATCH1_PIN_DOCKIT2 7 + static struct resource latch2_resources[] = { [0] = { .name = "dat", @@ -398,38 +410,43 @@ static struct gpiod_lookup_table ams_delta_lcd_gpio_table = { }, }; -static const struct gpio_led gpio_leds[] __initconst = { - { +/* + * Dynamically allocated GPIO numbers must be obtained fromm GPIO device + * before they can be put in the gpio_led table. Before that happens, + * initialize the table with invalid GPIO numbers, not 0. + */ +static struct gpio_led gpio_leds[] __initdata = { + [LATCH1_PIN_LED_CAMERA] = { .name = "camera", - .gpio = LATCH1_GPIO_BASE + 0, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, #ifdef CONFIG_LEDS_TRIGGERS .default_trigger = "ams_delta_camera", #endif }, - { + [LATCH1_PIN_LED_ADVERT] = { .name = "advert", - .gpio = LATCH1_GPIO_BASE + 1, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_MAIL] = { .name = "email", - .gpio = LATCH1_GPIO_BASE + 2, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_HANDSFREE] = { .name = "handsfree", - .gpio = LATCH1_GPIO_BASE + 3, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_VOICEMAIL] = { .name = "voicemail", - .gpio = LATCH1_GPIO_BASE + 4, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_VOICE] = { .name = "voice", - .gpio = LATCH1_GPIO_BASE + 5, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, }; @@ -504,16 +521,70 @@ static struct platform_device cx20442_codec_device = { .id = -1, }; -static struct gpiod_lookup_table ams_delta_serio_gpio_table = { +static struct resource ams_delta_serio_resources[] = { + { + .flags = IORESOURCE_IRQ, + /* + * Initialize IRQ resource with invalid IRQ number. + * It will be replaced with dynamically allocated GPIO IRQ + * obtained from GPIO chip as soon as the chip is available. + */ + .start = -EINVAL, + .end = -EINVAL, + }, +}; + +static struct platform_device ams_delta_serio_device = { + .name = "ams-delta-serio", + .id = PLATFORM_DEVID_NONE, + .dev = { + /* + * Initialize .platform_data explicitly with NULL to + * indicate it is going to be used. It will be replaced + * with FIQ buffer address as soon as FIQ is initialized. + */ + .platform_data = NULL, + }, + .num_resources = ARRAY_SIZE(ams_delta_serio_resources), + .resource = ams_delta_serio_resources, +}; + +static struct regulator_consumer_supply keybrd_pwr_consumers[] = { + /* + * Initialize supply .dev_name with NULL. It will be replaced + * with serio dev_name() as soon as the serio device is registered. + */ + REGULATOR_SUPPLY("vcc", NULL), +}; + +static struct regulator_init_data keybrd_pwr_initdata = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(keybrd_pwr_consumers), + .consumer_supplies = keybrd_pwr_consumers, +}; + +static struct fixed_voltage_config keybrd_pwr_config = { + .supply_name = "keybrd_pwr", + .microvolts = 5000000, + .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, + .enable_high = 1, + .init_data = &keybrd_pwr_initdata, +}; + +static struct platform_device keybrd_pwr_device = { + .name = "reg-fixed-voltage", + .id = PLATFORM_DEVID_AUTO, + .dev = { + .platform_data = &keybrd_pwr_config, + }, +}; + +static struct gpiod_lookup_table keybrd_pwr_gpio_table = { .table = { - GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_KEYBRD_DATA, - "data", 0), - GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_KEYBRD_CLK, - "clock", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, - "power", 0), - GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, - "dataout", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, NULL, + GPIO_ACTIVE_HIGH), { }, }, }; @@ -524,9 +595,7 @@ static struct platform_device *ams_delta_devices[] __initdata = { &ams_delta_kp_device, &ams_delta_camera_device, &ams_delta_audio_device, -}; - -static struct platform_device *late_devices[] __initdata = { + &ams_delta_serio_device, &ams_delta_nand_device, &ams_delta_lcd_device, &cx20442_codec_device, @@ -534,14 +603,55 @@ static struct platform_device *late_devices[] __initdata = { static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { &ams_delta_audio_gpio_table, - &ams_delta_serio_gpio_table, -}; - -static struct gpiod_lookup_table *late_gpio_tables[] __initdata = { + &keybrd_pwr_gpio_table, &ams_delta_lcd_gpio_table, &ams_delta_nand_gpio_table, }; +/* + * Some drivers may not use GPIO lookup tables but need to be provided + * with GPIO numbers. The same applies to GPIO based IRQ lines - some + * drivers may even not use GPIO layer but expect just IRQ numbers. + * We could either define GPIO lookup tables then use them on behalf + * of those devices, or we can use GPIO driver level methods for + * identification of GPIO and IRQ numbers. For the purpose of the latter, + * defina a helper function which identifies GPIO chips by their labels. + */ +static int gpiochip_match_by_label(struct gpio_chip *chip, void *data) +{ + char *label = data; + + return !strcmp(label, chip->label); +} + +static struct gpiod_hog ams_delta_gpio_hogs[] = { + GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout", + GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), + {}, +}; + +/* + * The purpose of this function is to take care of proper initialization of + * devices and data structures which depend on GPIO lines provided by OMAP GPIO + * banks but their drivers don't use GPIO lookup tables or GPIO layer at all. + * The function may be called as soon as OMAP GPIO devices are probed. + * Since that happens at postcore_initcall, it can be called successfully + * from init_machine or later. + * Dependent devices may be registered from within this function or later. + */ +static void __init omap_gpio_deps_init(void) +{ + struct gpio_chip *chip; + + chip = gpiochip_find(OMAP_GPIO_LABEL, gpiochip_match_by_label); + if (!chip) { + pr_err("%s: OMAP GPIO chip not found\n", __func__); + return; + } + + ams_delta_init_fiq(chip, &ams_delta_serio_device); +} + static void __init ams_delta_init(void) { /* mux pins for uarts */ @@ -562,6 +672,9 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); + omap_gpio_deps_init(); + gpiod_add_hogs(ams_delta_gpio_hogs); + omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); @@ -571,25 +684,38 @@ static void __init ams_delta_init(void) led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif - gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); /* - * As soon as devices have been registered, assign their dev_names - * to respective GPIO lookup tables before they are added. + * As soon as regulator consumers have been registered, assign their + * dev_names to consumer supply entries of respective regulators. + */ + keybrd_pwr_consumers[0].dev_name = + dev_name(&ams_delta_serio_device.dev); + + /* + * Once consumer supply entries are populated with dev_names, + * register regulator devices. At this stage only the keyboard + * power regulator has its consumer supply table fully populated. + */ + platform_device_register(&keybrd_pwr_device); + + /* + * As soon as GPIO consumers have been registered, assign + * their dev_names to respective GPIO lookup tables. */ ams_delta_audio_gpio_table.dev_id = dev_name(&ams_delta_audio_device.dev); - /* - * No device name is assigned to GPIO lookup table for serio device - * as long as serio driver is not converted to platform device driver. - */ + keybrd_pwr_gpio_table.dev_id = dev_name(&keybrd_pwr_device.dev); + ams_delta_nand_gpio_table.dev_id = dev_name(&ams_delta_nand_device.dev); + ams_delta_lcd_gpio_table.dev_id = dev_name(&ams_delta_lcd_device.dev); + /* + * Once GPIO lookup tables are populated with dev_names, register them. + */ gpiod_add_lookup_tables(ams_delta_gpio_tables, ARRAY_SIZE(ams_delta_gpio_tables)); - ams_delta_init_fiq(); - omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); omapfb_set_lcd_config(&ams_delta_lcd_config); @@ -643,35 +769,84 @@ static struct platform_device ams_delta_modem_device = { }, }; -static int __init late_init(void) +/* + * leds-gpio driver doesn't make use of GPIO lookup tables, + * it has to be provided with GPIO numbers over platform data + * if GPIO descriptor info can't be obtained from device tree. + * We could either define GPIO lookup tables and use them on behalf + * of the leds-gpio device, or we can use GPIO driver level methods + * for identification of GPIO numbers as long as we don't support + * device tree. Let's do the latter. + */ +static void __init ams_delta_led_init(struct gpio_chip *chip) { + struct gpio_desc *gpiod; + int i; + + for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) { + gpiod = gpiochip_request_own_desc(chip, i, NULL); + if (IS_ERR(gpiod)) { + pr_warn("%s: %s GPIO %d request failed (%ld)\n", + __func__, LATCH1_LABEL, i, PTR_ERR(gpiod)); + continue; + } + + /* Assign GPIO numbers to LED device. */ + gpio_leds[i].gpio = desc_to_gpio(gpiod); + + gpiochip_free_own_desc(gpiod); + } + + gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata); +} + +/* + * The purpose of this function is to take care of assignment of GPIO numbers + * to platform devices which depend on GPIO lines provided by Amstrad Delta + * latch1 and/or latch2 GPIO devices but don't use GPIO lookup tables. + * The function may be called as soon as latch1/latch2 GPIO devices are + * initilized. Since basic-mmio-gpio driver is not registered before + * device_initcall, this may happen at erliest during device_initcall_sync. + * Dependent devices shouldn't be registered before that, their + * registration may be performed from within this function or later. + */ +static int __init ams_delta_gpio_init(void) +{ + struct gpio_chip *chip; int err; if (!machine_is_ams_delta()) return -ENODEV; + chip = gpiochip_find(LATCH1_LABEL, gpiochip_match_by_label); + if (!chip) + pr_err("%s: latch1 GPIO chip not found\n", __func__); + else + ams_delta_led_init(chip); + err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); - if (err) { + if (err) pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); - return err; - } - platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); + return err; +} +device_initcall_sync(ams_delta_gpio_init); - /* - * As soon as devices have been registered, assign their dev_names - * to respective GPIO lookup tables before they are added. - */ - ams_delta_lcd_gpio_table.dev_id = dev_name(&ams_delta_lcd_device.dev); - ams_delta_nand_gpio_table.dev_id = dev_name(&ams_delta_nand_device.dev); - - gpiod_add_lookup_tables(late_gpio_tables, ARRAY_SIZE(late_gpio_tables)); +static int __init modem_nreset_init(void) +{ + int err; err = platform_device_register(&modem_nreset_device); - if (err) { + if (err) pr_err("Couldn't register the modem regulator device\n"); - return err; - } + + return err; +} + + +static int __init ams_delta_modem_init(void) +{ + int err; omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = @@ -692,7 +867,22 @@ static int __init late_init(void) err = platform_device_register(&ams_delta_modem_device); if (err) - goto gpio_free; + gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + + return err; +} + +static int __init late_init(void) +{ + int err; + + err = modem_nreset_init(); + if (err) + return err; + + err = ams_delta_modem_init(); + if (err) + return err; /* * Once the modem device is registered, the modem_nreset @@ -708,7 +898,6 @@ static int __init late_init(void) unregister: platform_device_unregister(&ams_delta_modem_device); -gpio_free: gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); return err; } diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index ab51f8554697..9aeb8ad8c327 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -274,7 +274,7 @@ static struct platform_device h2_kp_device = { .resource = h2_kp_resources, }; -static struct gpio_led h2_gpio_led_pins[] = { +static const struct gpio_led h2_gpio_led_pins[] = { { .name = "h2:red", .default_trigger = "heartbeat", diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ad339f51cc78..2edcd6356f2d 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -326,7 +326,7 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { }, }; -static struct gpio_led h3_gpio_led_pins[] = { +static const struct gpio_led h3_gpio_led_pins[] = { { .name = "h3:red", .default_trigger = "heartbeat", diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index da8f3fc3180f..5733212759d3 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -292,7 +292,7 @@ static struct platform_device herald_gpiokeys_device = { }; /* LEDs for the Herald. These connect to the HTCPLD GPIO device. */ -static struct gpio_led gpio_leds[] = { +static const struct gpio_led gpio_leds[] = { {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF}, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 9ffa8d755a59..4df15e693b6e 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -167,7 +167,7 @@ static struct platform_device *osk5912_devices[] __initdata = { &osk5912_cf_device, }; -static struct gpio_led tps_leds[] = { +static const struct gpio_led tps_leds[] = { /* NOTE: D9 and D2 have hardware blink support. * Also, D9 requires non-battery power. */ @@ -385,7 +385,7 @@ static struct platform_device osk5912_lcd_device = { .id = -1, }; -static struct gpio_led mistral_gpio_led_pins[] = { +static const struct gpio_led mistral_gpio_led_pins[] = { { .name = "mistral:red", .default_trigger = "heartbeat", diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c index b68f9c0aff0b..d5ddba00bb73 100644 --- a/arch/arm/mach-omap2/omap_hwmod_reset.c +++ b/arch/arm/mach-omap2/omap_hwmod_reset.c @@ -92,11 +92,13 @@ static void omap_rtc_wait_not_busy(struct omap_hwmod *oh) */ void omap_hwmod_rtc_unlock(struct omap_hwmod *oh) { - local_irq_disable(); + unsigned long flags; + + local_irq_save(flags); omap_rtc_wait_not_busy(oh); omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG); omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG); - local_irq_enable(); + local_irq_restore(flags); } /** @@ -110,9 +112,11 @@ void omap_hwmod_rtc_unlock(struct omap_hwmod *oh) */ void omap_hwmod_rtc_lock(struct omap_hwmod *oh) { - local_irq_disable(); + unsigned long flags; + + local_irq_save(flags); omap_rtc_wait_not_busy(oh); omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG); omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG); - local_irq_enable(); + local_irq_restore(flags); } diff --git a/arch/arm/mach-omap2/pm-asm-offsets.c b/arch/arm/mach-omap2/pm-asm-offsets.c index b9846b19e5e2..d8ae8a85b14b 100644 --- a/arch/arm/mach-omap2/pm-asm-offsets.c +++ b/arch/arm/mach-omap2/pm-asm-offsets.c @@ -27,6 +27,8 @@ int main(void) offsetof(struct am33xx_pm_ro_sram_data, amx3_pm_sram_data_virt)); DEFINE(AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET, offsetof(struct am33xx_pm_ro_sram_data, amx3_pm_sram_data_phys)); + DEFINE(AMX3_PM_RTC_BASE_VIRT_OFFSET, + offsetof(struct am33xx_pm_ro_sram_data, rtc_base_virt)); DEFINE(AMX3_PM_RO_SRAM_DATA_SIZE, sizeof(struct am33xx_pm_ro_sram_data)); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index acb698d5780f..5a8839203958 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -47,11 +47,6 @@ static int pm_dbg_init_done; static int pm_dbg_init(void); -enum { - DEBUG_FILE_COUNTERS = 0, - DEBUG_FILE_TIMERS, -}; - static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = { "OFF", "RET", @@ -141,39 +136,21 @@ static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user) return 0; } -static int pm_dbg_show_counters(struct seq_file *s, void *unused) +static int pm_dbg_counters_show(struct seq_file *s, void *unused) { pwrdm_for_each(pwrdm_dbg_show_counter, s); clkdm_for_each(clkdm_dbg_show_counter, s); return 0; } +DEFINE_SHOW_ATTRIBUTE(pm_dbg_counters); -static int pm_dbg_show_timers(struct seq_file *s, void *unused) +static int pm_dbg_timers_show(struct seq_file *s, void *unused) { pwrdm_for_each(pwrdm_dbg_show_timer, s); return 0; } - -static int pm_dbg_open(struct inode *inode, struct file *file) -{ - switch ((int)inode->i_private) { - case DEBUG_FILE_COUNTERS: - return single_open(file, pm_dbg_show_counters, - &inode->i_private); - case DEBUG_FILE_TIMERS: - default: - return single_open(file, pm_dbg_show_timers, - &inode->i_private); - } -} - -static const struct file_operations debug_fops = { - .open = pm_dbg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(pm_dbg_timers); static int pwrdm_suspend_get(void *data, u64 *val) { @@ -259,10 +236,8 @@ static int __init pm_dbg_init(void) if (!d) return -EINVAL; - (void) debugfs_create_file("count", S_IRUGO, - d, (void *)DEBUG_FILE_COUNTERS, &debug_fops); - (void) debugfs_create_file("time", S_IRUGO, - d, (void *)DEBUG_FILE_TIMERS, &debug_fops); + (void) debugfs_create_file("count", 0444, d, NULL, &pm_dbg_counters_fops); + (void) debugfs_create_file("time", 0444, d, NULL, &pm_dbg_timers_fops); pwrdm_for_each(pwrdms_setup, (void *)d); diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 9b3755a2e2ec..f4971e4a86b2 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -26,6 +26,7 @@ static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm; static struct clockdomain *gfx_l4ls_clkdm; static void __iomem *scu_base; +static struct omap_hwmod *rtc_oh; static int __init am43xx_map_scu(void) { @@ -106,12 +107,13 @@ static void amx3_post_suspend_common(void) pr_err("PM: GFX domain did not transition: %x\n", status); } -static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long)) +static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long), + unsigned long args) { int ret = 0; amx3_pre_suspend_common(); - ret = cpu_suspend(0, fn); + ret = cpu_suspend(args, fn); amx3_post_suspend_common(); /* @@ -128,13 +130,14 @@ static int am33xx_suspend(unsigned int state, int (*fn)(unsigned long)) return ret; } -static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long)) +static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long), + unsigned long args) { int ret = 0; amx3_pre_suspend_common(); scu_power_mode(scu_base, SCU_PM_POWEROFF); - ret = cpu_suspend(0, fn); + ret = cpu_suspend(args, fn); scu_power_mode(scu_base, SCU_PM_NORMAL); amx3_post_suspend_common(); @@ -151,16 +154,25 @@ static struct am33xx_pm_sram_addr *amx3_get_sram_addrs(void) return NULL; } +void __iomem *am43xx_get_rtc_base_addr(void) +{ + rtc_oh = omap_hwmod_lookup("rtc"); + + return omap_hwmod_get_mpu_rt_va(rtc_oh); +} + static struct am33xx_pm_platform_data am33xx_ops = { .init = am33xx_suspend_init, .soc_suspend = am33xx_suspend, .get_sram_addrs = amx3_get_sram_addrs, + .get_rtc_base_addr = am43xx_get_rtc_base_addr, }; static struct am33xx_pm_platform_data am43xx_ops = { .init = am43xx_suspend_init, .soc_suspend = am43xx_suspend, .get_sram_addrs = amx3_get_sram_addrs, + .get_rtc_base_addr = am43xx_get_rtc_base_addr, }; static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void) diff --git a/arch/arm/mach-omap2/sleep33xx.S b/arch/arm/mach-omap2/sleep33xx.S index 322b3bb868b4..47a816468cdb 100644 --- a/arch/arm/mach-omap2/sleep33xx.S +++ b/arch/arm/mach-omap2/sleep33xx.S @@ -8,6 +8,7 @@ #include #include +#include #include #include #include @@ -19,12 +20,25 @@ #define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003 #define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002 +/* replicated define because linux/bitops.h cannot be included in assembly */ +#define BIT(nr) (1 << (nr)) + .arm .align 3 ENTRY(am33xx_do_wfi) stmfd sp!, {r4 - r11, lr} @ save registers on stack + /* Save wfi_flags arg to data space */ + mov r4, r0 + adr r3, am33xx_pm_ro_sram_data + ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET] + str r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET] + + /* Only flush cache is we know we are losing MPU context */ + tst r4, #WFI_FLAG_FLUSH_CACHE + beq cache_skip_flush + /* * Flush all data from the L1 and L2 data cache before disabling * SCTLR.C bit. @@ -48,14 +62,33 @@ ENTRY(am33xx_do_wfi) ldr r1, kernel_flush blx r1 + adr r3, am33xx_pm_ro_sram_data + ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET] + ldr r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET] + +cache_skip_flush: + /* Check if we want self refresh */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_enter_sr + adr r9, am33xx_emif_sram_table ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET] blx r3 +emif_skip_enter_sr: + /* Only necessary if PER is losing context */ + tst r4, #WFI_FLAG_SAVE_EMIF + beq emif_skip_save + ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET] blx r3 +emif_skip_save: + /* Only can disable EMIF if we have entered self refresh */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_disable + /* Disable EMIF */ ldr r1, virt_emif_clkctrl ldr r2, [r1] @@ -69,6 +102,10 @@ wait_emif_disable: cmp r2, r3 bne wait_emif_disable +emif_skip_disable: + tst r4, #WFI_FLAG_WAKE_M3 + beq wkup_m3_skip + /* * For the MPU WFI to be registered as an interrupt * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set @@ -79,6 +116,7 @@ wait_emif_disable: bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE str r2, [r1] +wkup_m3_skip: /* * Execute an ISB instruction to ensure that all of the * CP15 register changes have been committed. @@ -132,10 +170,18 @@ wait_emif_enable: cmp r2, r3 bne wait_emif_enable + /* Only necessary if PER is losing context */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_exit_sr_abt + adr r9, am33xx_emif_sram_table ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET] blx r1 +emif_skip_exit_sr_abt: + tst r4, #WFI_FLAG_FLUSH_CACHE + beq cache_skip_restore + /* * Set SCTLR.C bit to allow data cache allocation */ @@ -144,6 +190,7 @@ wait_emif_enable: mcr p15, 0, r0, c1, c0, 0 isb +cache_skip_restore: /* Let the suspend code know about the abort */ mov r0, #1 ldmfd sp!, {r4 - r11, pc} @ restore regs and return @@ -181,8 +228,6 @@ ENDPROC(am33xx_resume_from_deep_sleep) * Local variables */ .align -resume_addr: - .word cpu_resume - PAGE_OFFSET + 0x80000000 kernel_flush: .word v7_flush_dcache_all virt_mpu_clkctrl: @@ -205,6 +250,9 @@ ENTRY(am33xx_pm_sram) .word am33xx_emif_sram_table .word am33xx_pm_ro_sram_data +resume_addr: +.word cpu_resume - PAGE_OFFSET + 0x80000000 + .align 3 ENTRY(am33xx_pm_ro_sram_data) .space AMX3_PM_RO_SRAM_DATA_SIZE diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S index 8903814a6677..5b9343b58fc7 100644 --- a/arch/arm/mach-omap2/sleep43xx.S +++ b/arch/arm/mach-omap2/sleep43xx.S @@ -9,7 +9,7 @@ #include #include #include - +#include #include #include #include @@ -22,6 +22,9 @@ #include "prm33xx.h" #include "prcm43xx.h" +/* replicated define because linux/bitops.h cannot be included in assembly */ +#define BIT(nr) (1 << (nr)) + #define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000 #define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003 #define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002 @@ -45,12 +48,25 @@ AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET) #define AM43XX_PRM_EMIF_CTRL_OFFSET 0x0030 +#define RTC_SECONDS_REG 0x0 +#define RTC_PMIC_REG 0x98 +#define RTC_PMIC_POWER_EN BIT(16) +#define RTC_PMIC_EXT_WAKEUP_STS BIT(12) +#define RTC_PMIC_EXT_WAKEUP_POL BIT(4) +#define RTC_PMIC_EXT_WAKEUP_EN BIT(0) + .arm .align 3 ENTRY(am43xx_do_wfi) stmfd sp!, {r4 - r11, lr} @ save registers on stack + /* Save wfi_flags arg to data space */ + mov r4, r0 + adr r3, am43xx_pm_ro_sram_data + ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET] + str r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET] + #ifdef CONFIG_CACHE_L2X0 /* Retrieve l2 cache virt address BEFORE we shut off EMIF */ ldr r1, get_l2cache_base @@ -58,6 +74,10 @@ ENTRY(am43xx_do_wfi) mov r8, r0 #endif + /* Only flush cache is we know we are losing MPU context */ + tst r4, #WFI_FLAG_FLUSH_CACHE + beq cache_skip_flush + /* * Flush all data from the L1 and L2 data cache before disabling * SCTLR.C bit. @@ -128,13 +148,47 @@ sync: bne sync #endif + /* Restore wfi_flags */ + adr r3, am43xx_pm_ro_sram_data + ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET] + ldr r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET] + +cache_skip_flush: + /* + * If we are trying to enter RTC+DDR mode we must perform + * a read from the rtc address space to ensure translation + * presence in the TLB to avoid page table walk after DDR + * is unavailable. + */ + tst r4, #WFI_FLAG_RTC_ONLY + beq skip_rtc_va_refresh + + adr r3, am43xx_pm_ro_sram_data + ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET] + ldr r0, [r1] + +skip_rtc_va_refresh: + /* Check if we want self refresh */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_enter_sr + adr r9, am43xx_emif_sram_table ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET] blx r3 +emif_skip_enter_sr: + /* Only necessary if PER is losing context */ + tst r4, #WFI_FLAG_SAVE_EMIF + beq emif_skip_save + ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET] - blx r3 + blx r3 + +emif_skip_save: + /* Only can disable EMIF if we have entered self refresh */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_disable /* Disable EMIF */ ldr r1, am43xx_virt_emif_clkctrl @@ -148,6 +202,38 @@ wait_emif_disable: cmp r2, r3 bne wait_emif_disable +emif_skip_disable: + tst r4, #WFI_FLAG_RTC_ONLY + beq skip_rtc_only + + adr r3, am43xx_pm_ro_sram_data + ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET] + + ldr r0, [r1, #RTC_PMIC_REG] + orr r0, r0, #RTC_PMIC_POWER_EN + orr r0, r0, #RTC_PMIC_EXT_WAKEUP_STS + orr r0, r0, #RTC_PMIC_EXT_WAKEUP_EN + orr r0, r0, #RTC_PMIC_EXT_WAKEUP_POL + str r0, [r1, #RTC_PMIC_REG] + ldr r0, [r1, #RTC_PMIC_REG] + /* Wait for 2 seconds to lose power */ + mov r3, #2 + ldr r2, [r1, #RTC_SECONDS_REG] +rtc_loop: + ldr r0, [r1, #RTC_SECONDS_REG] + cmp r0, r2 + beq rtc_loop + mov r2, r0 + subs r3, r3, #1 + bne rtc_loop + + b re_enable_emif + +skip_rtc_only: + + tst r4, #WFI_FLAG_WAKE_M3 + beq wkup_m3_skip + /* * For the MPU WFI to be registered as an interrupt * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set @@ -165,6 +251,7 @@ wait_emif_disable: mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP str r2, [r1] +wkup_m3_skip: /* * Execute a barrier instruction to ensure that all cache, * TLB and branch predictor maintenance operations issued @@ -209,6 +296,7 @@ wait_emif_disable: mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE str r2, [r1] +re_enable_emif: /* Re-enable EMIF */ ldr r1, am43xx_virt_emif_clkctrl mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE @@ -218,6 +306,9 @@ wait_emif_enable: cmp r2, r3 bne wait_emif_enable + tst r4, #WFI_FLAG_FLUSH_CACHE + beq cache_skip_restore + /* * Set SCTLR.C bit to allow data cache allocation */ @@ -226,9 +317,16 @@ wait_emif_enable: mcr p15, 0, r0, c1, c0, 0 isb - ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET] - blx r1 +cache_skip_restore: + /* Only necessary if PER is losing context */ + tst r4, #WFI_FLAG_SELF_REFRESH + beq emif_skip_exit_sr_abt + adr r9, am43xx_emif_sram_table + ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET] + blx r1 + +emif_skip_exit_sr_abt: /* Let the suspend code know about the abort */ mov r0, #1 ldmfd sp!, {r4 - r11, pc} @ restore regs and return @@ -333,8 +431,6 @@ ENDPROC(am43xx_resume_from_deep_sleep) * Local variables */ .align -resume_addr: - .word cpu_resume - PAGE_OFFSET + 0x80000000 kernel_flush: .word v7_flush_dcache_all ddr_start: @@ -381,6 +477,8 @@ ENTRY(am43xx_pm_sram) .word am43xx_emif_sram_table .word am43xx_pm_ro_sram_data +resume_addr: + .word cpu_resume - PAGE_OFFSET + 0x80000000 .align 3 ENTRY(am43xx_pm_ro_sram_data) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 5a16ea74e28a..a24783a03827 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -3,6 +3,7 @@ #include #include #include +#include #include #include #include @@ -477,6 +478,18 @@ struct platform_device pxa_device_ac97 = { void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops) { + int ret; + + ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:0", "AC97CLK", + &pxa_device_ac97.dev); + if (ret) + pr_err("PXA AC97 clock1 alias error: %d\n", ret); + + ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:1", "AC97CLK", + &pxa_device_ac97.dev); + if (ret) + pr_err("PXA AC97 clock2 alias error: %d\n", ret); + pxa_register_device(&pxa_device_ac97, ops); } diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index e2e7f247a645..b79b757fdd41 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -54,6 +54,7 @@ #include "devices.h" #include "generic.h" +#include "udc.h" /* Physical address space information */ @@ -594,6 +595,8 @@ static struct platform_device gpio_vbus = { }, }; +static struct pxa2xx_udc_mach_info hx4700_udc_info; + /* * Touchscreen - TSC2046 connected to SSP2 */ @@ -891,6 +894,7 @@ static void __init hx4700_init(void) gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1); mdelay(10); + pxa_set_udc_info(&hx4700_udc_info); regulator_has_full_constraints(); } diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 9b6c7ea45a40..04dc78d0809f 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -677,14 +677,12 @@ MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) -MIO_SIMPLE_DEV(wm9713_acodec, "wm9713-codec", NULL); MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); static struct platform_device *devices[] __initdata = { &mioa701_gpio_keys, &mioa701_backlight, &mioa701_led, - &wm9713_acodec, &pxa2xx_pcm, &mioa701_sound, &power_dev, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index d69de312d8d9..52e70a5c1281 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -47,16 +47,6 @@ int wm9713_irq; int lcd_id; int lcd_orientation; -struct platform_device pxa_device_wm9713_audio = { - .name = "wm9713-codec", - .id = -1, -}; - -static void __init zylonite_init_wm9713_audio(void) -{ - platform_device_register(&pxa_device_wm9713_audio); -} - static struct resource smc91x_resources[] = { [0] = { .start = ZYLONITE_ETH_PHYS + 0x300, @@ -428,7 +418,6 @@ static void __init zylonite_init(void) zylonite_init_nand(); zylonite_init_leds(); zylonite_init_ohci(); - zylonite_init_wm9713_audio(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h index b6b32724ace8..4ff83f956cfb 100644 --- a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h +++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h @@ -6,7 +6,7 @@ */ #ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H -#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__ +#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__ #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) #define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x)) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0b67254eabb2..aeb2eed08598 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -15,6 +15,7 @@ config ARCH_RCAR_GEN1 config ARCH_RCAR_GEN2 bool + select HAVE_ARM_ARCH_TIMER select PM select PM_GENERIC_DOMAINS select RENESAS_IRQC @@ -58,6 +59,7 @@ config ARCH_R8A73A4 bool "R-Mobile APE6 (R8A73A40)" select ARCH_RMOBILE select ARM_ERRATA_798181 if SMP + select HAVE_ARM_ARCH_TIMER select RENESAS_IRQC config ARCH_R8A7740 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 1939f521579c..b33dc59d8698 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -11,9 +11,7 @@ obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o -obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o -obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o -obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o +obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o @@ -23,17 +21,15 @@ cpu-y := platsmp.o headsmp.o # Shared SoC family objects obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y) CFLAGS_setup-rcar-gen2.o += -march=armv7-a -obj-$(CONFIG_ARCH_RCAR_GEN2) += headsmp-apmu.o obj-$(CONFIG_ARCH_R8A7790) += regulator-quirk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7791) += regulator-quirk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7793) += regulator-quirk-rcar-gen2.o # SMP objects smp-y := $(cpu-y) +smp-$(CONFIG_ARCH_RCAR_GEN2) += headsmp-apmu.o smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o -smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o -smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o # PM objects diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 2109f123bdfb..3ac4b36b5c2b 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -15,7 +15,6 @@ extern void shmobile_smp_sleep(void); extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); extern bool shmobile_smp_cpu_can_disable(unsigned int cpu); -extern bool shmobile_smp_init_fallback_ops(void); extern void shmobile_boot_apmu(void); extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, diff --git a/arch/arm/mach-shmobile/headsmp-apmu.S b/arch/arm/mach-shmobile/headsmp-apmu.S index d49ab194766a..fabe9cadd12e 100644 --- a/arch/arm/mach-shmobile/headsmp-apmu.S +++ b/arch/arm/mach-shmobile/headsmp-apmu.S @@ -1,19 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * SMP support for APMU based systems with Cortex A7/A15 * * Copyright (C) 2014 Renesas Electronics Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include #include -#ifdef CONFIG_SMP ENTRY(shmobile_boot_apmu) bl secure_cntvoff_init b secondary_startup ENDPROC(shmobile_boot_apmu) -#endif diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index ba732effc90b..96330ef25641 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SMP support for SoCs with APMU * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include #include @@ -23,7 +20,6 @@ #include #include #include "common.h" -#include "platsmp-apmu.h" #include "rcar-gen2.h" static struct { @@ -87,6 +83,104 @@ static int __maybe_unused apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu) return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL; } +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND) +/* nicked from arch/arm/mach-exynos/hotplug.c */ +static inline void cpu_enter_lowpower_a15(void) +{ + unsigned int v; + + asm volatile( + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "Ir" (CR_C) + : "cc"); + + flush_cache_louis(); + + asm volatile( + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (0x40) + : "cc"); + + isb(); + dsb(); +} + +static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) +{ + + /* Select next sleep mode using the APMU */ + apmu_wrap(cpu, apmu_power_off); + + /* Do ARM specific CPU shutdown */ + cpu_enter_lowpower_a15(); +} +#endif + +#if defined(CONFIG_HOTPLUG_CPU) +static void shmobile_smp_apmu_cpu_die(unsigned int cpu) +{ + /* For this particular CPU deregister boot vector */ + shmobile_smp_hook(cpu, 0, 0); + + /* Shutdown CPU core */ + shmobile_smp_apmu_cpu_shutdown(cpu); + + /* jump to shared mach-shmobile sleep / reset code */ + shmobile_smp_sleep(); +} + +static int shmobile_smp_apmu_cpu_kill(unsigned int cpu) +{ + return apmu_wrap(cpu, apmu_power_off_poll); +} +#endif + +#if defined(CONFIG_SUSPEND) +static int shmobile_smp_apmu_do_suspend(unsigned long cpu) +{ + shmobile_smp_hook(cpu, __pa_symbol(cpu_resume), 0); + shmobile_smp_apmu_cpu_shutdown(cpu); + cpu_do_idle(); /* WFI selects Core Standby */ + return 1; +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile("mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +static int shmobile_smp_apmu_enter_suspend(suspend_state_t state) +{ + cpu_suspend(smp_processor_id(), shmobile_smp_apmu_do_suspend); + cpu_leave_lowpower(); + return 0; +} + +void __init shmobile_smp_apmu_suspend_init(void) +{ + shmobile_suspend_ops.enter = shmobile_smp_apmu_enter_suspend; +} +#endif + #ifdef CONFIG_SMP static void apmu_init_cpu(struct resource *res, int cpu, int bit) { @@ -106,38 +200,6 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit) writel(x, apmu_cpus[cpu].iomem + DBGRCR_OFFS); } -static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit), - struct rcar_apmu_config *apmu_config, int num) -{ - int id; - int k; - int bit, index; - bool is_allowed; - - for (k = 0; k < num; k++) { - /* only enable the cluster that includes the boot CPU */ - is_allowed = false; - for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) { - id = apmu_config[k].cpus[bit]; - if (id >= 0) { - if (id == cpu_logical_map(0)) - is_allowed = true; - } - } - if (!is_allowed) - continue; - - for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) { - id = apmu_config[k].cpus[bit]; - if (id >= 0) { - index = get_logical_index(id); - if (index >= 0) - fn(&apmu_config[k].iomem, index, bit); - } - } - } -} - static const struct of_device_id apmu_ids[] = { { .compatible = "renesas,apmu" }, { /*sentinel*/ } @@ -194,15 +256,8 @@ static void __init shmobile_smp_apmu_setup_boot(void) shmobile_boot_fn_gen2 = shmobile_boot_fn; } -void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, - struct rcar_apmu_config *apmu_config, - int num) -{ - shmobile_smp_apmu_setup_boot(); - apmu_parse_cfg(apmu_init_cpu, apmu_config, num); -} - -int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int shmobile_smp_apmu_boot_secondary(unsigned int cpu, + struct task_struct *idle) { /* For this particular CPU register boot vector */ shmobile_smp_hook(cpu, __pa_symbol(shmobile_boot_apmu), 0); @@ -229,101 +284,3 @@ static struct smp_operations apmu_smp_ops __initdata = { CPU_METHOD_OF_DECLARE(shmobile_smp_apmu, "renesas,apmu", &apmu_smp_ops); #endif /* CONFIG_SMP */ - -#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND) -/* nicked from arch/arm/mach-exynos/hotplug.c */ -static inline void cpu_enter_lowpower_a15(void) -{ - unsigned int v; - - asm volatile( - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "Ir" (CR_C) - : "cc"); - - flush_cache_louis(); - - asm volatile( - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (0x40) - : "cc"); - - isb(); - dsb(); -} - -static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu) -{ - - /* Select next sleep mode using the APMU */ - apmu_wrap(cpu, apmu_power_off); - - /* Do ARM specific CPU shutdown */ - cpu_enter_lowpower_a15(); -} - -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} -#endif - -#if defined(CONFIG_HOTPLUG_CPU) -void shmobile_smp_apmu_cpu_die(unsigned int cpu) -{ - /* For this particular CPU deregister boot vector */ - shmobile_smp_hook(cpu, 0, 0); - - /* Shutdown CPU core */ - shmobile_smp_apmu_cpu_shutdown(cpu); - - /* jump to shared mach-shmobile sleep / reset code */ - shmobile_smp_sleep(); -} - -int shmobile_smp_apmu_cpu_kill(unsigned int cpu) -{ - return apmu_wrap(cpu, apmu_power_off_poll); -} -#endif - -#if defined(CONFIG_SUSPEND) -static int shmobile_smp_apmu_do_suspend(unsigned long cpu) -{ - shmobile_smp_hook(cpu, __pa_symbol(cpu_resume), 0); - shmobile_smp_apmu_cpu_shutdown(cpu); - cpu_do_idle(); /* WFI selects Core Standby */ - return 1; -} - -static int shmobile_smp_apmu_enter_suspend(suspend_state_t state) -{ - cpu_suspend(smp_processor_id(), shmobile_smp_apmu_do_suspend); - cpu_leave_lowpower(); - return 0; -} - -void __init shmobile_smp_apmu_suspend_init(void) -{ - shmobile_suspend_ops.enter = shmobile_smp_apmu_enter_suspend; -} -#endif diff --git a/arch/arm/mach-shmobile/platsmp-apmu.h b/arch/arm/mach-shmobile/platsmp-apmu.h deleted file mode 100644 index 76512c9a2545..000000000000 --- a/arch/arm/mach-shmobile/platsmp-apmu.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * rmobile apmu definition - * - * Copyright (C) 2014 Renesas Electronics Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef PLATSMP_APMU_H -#define PLATSMP_APMU_H - -struct rcar_apmu_config { - struct resource iomem; - int cpus[4]; -}; - -extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, - struct rcar_apmu_config *apmu_config, - int num); -extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu, - struct task_struct *idle); -extern void shmobile_smp_apmu_cpu_die(unsigned int cpu); -extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu); - -#endif /* PLATSMP_APMU_H */ diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 02e21bceb085..b23378f3d7e1 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -36,12 +36,3 @@ bool shmobile_smp_cpu_can_disable(unsigned int cpu) return true; /* Hotplug of any CPU is supported */ } #endif - -bool __init shmobile_smp_init_fallback_ops(void) -{ - /* fallback on PSCI/smp_ops if no other DT based method is detected */ - if (!IS_ENABLED(CONFIG_SMP)) - return false; - - return platform_can_secondary_boot() ? true : false; -} diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c deleted file mode 100644 index 5c9a93f5e650..000000000000 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * r8a7779 Power management support - * - * Copyright (C) 2011 Renesas Solutions Corp. - * Copyright (C) 2011 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include - -#include - -#include "r8a7779.h" - -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_PM) || defined(CONFIG_SMP) - -static void __init r8a7779_sysc_init(void) -{ - rcar_sysc_init(0xffd85000, 0x0131000e); -} - -#else /* CONFIG_PM || CONFIG_SMP */ - -static inline void r8a7779_sysc_init(void) {} - -#endif /* CONFIG_PM || CONFIG_SMP */ - -void __init r8a7779_pm_init(void) -{ - static int once; - - if (!once++) - r8a7779_sysc_init(); -} diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c index 5a798b406af0..345af3ebcc3a 100644 --- a/arch/arm/mach-shmobile/pm-rcar-gen2.c +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include "common.h" @@ -46,23 +45,6 @@ static inline u32 phys_to_sbar(phys_addr_t addr) return (addr >> 8) & 0xfffffc00; } -/* SYSC */ -#define SYSCIER 0x0c -#define SYSCIMR 0x10 - -#if defined(CONFIG_SMP) - -static void __init rcar_gen2_sysc_init(u32 syscier) -{ - rcar_sysc_init(0xe6180000, syscier); -} - -#else /* CONFIG_SMP */ - -static inline void rcar_gen2_sysc_init(u32 syscier) {} - -#endif /* CONFIG_SMP */ - void __init rcar_gen2_pm_init(void) { void __iomem *p; @@ -72,7 +54,6 @@ void __init rcar_gen2_pm_init(void) bool has_a7 = false; bool has_a15 = false; struct resource res; - u32 syscier = 0; int error; if (once++) @@ -89,11 +70,6 @@ void __init rcar_gen2_pm_init(void) has_a7 = true; } - if (of_machine_is_compatible("renesas,r8a7790")) - syscier = 0x013111ef; - else if (of_machine_is_compatible("renesas,r8a7791")) - syscier = 0x00111003; - np = of_find_compatible_node(NULL, NULL, "renesas,smp-sram"); if (!np) { /* No smp-sram in DT, fall back to hardcoded address */ @@ -155,6 +131,5 @@ map: } iounmap(p); - rcar_gen2_sysc_init(syscier); shmobile_smp_apmu_suspend_init(); } diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h index 30668aa6acc3..ca9db8fde2f7 100644 --- a/arch/arm/mach-shmobile/r8a7779.h +++ b/arch/arm/mach-shmobile/r8a7779.h @@ -2,8 +2,6 @@ #ifndef __ASM_R8A7779_H__ #define __ASM_R8A7779_H__ -extern void r8a7779_pm_init(void); - extern const struct smp_operations r8a7779_smp_ops; #endif /* __ASM_R8A7779_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h deleted file mode 100644 index 669c8cd09e07..000000000000 --- a/arch/arm/mach-shmobile/r8a7790.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_R8A7790_H__ -#define __ASM_R8A7790_H__ - -extern const struct smp_operations r8a7790_smp_ops; - -#endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h deleted file mode 100644 index 8c794aace938..000000000000 --- a/arch/arm/mach-shmobile/r8a7791.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_R8A7791_H__ -#define __ASM_R8A7791_H__ - -extern const struct smp_operations r8a7791_smp_ops; - -#endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index 93f628acfd94..21ebc7678ffd 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * R-Car Generation 2 da9063/da9210 regulator quirk * @@ -16,15 +17,6 @@ * been initialized, but before the i2c slave drivers are initialized. * * Copyright (C) 2015 Glider bvba - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index 3c99aaf65325..a328d2f52678 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -1,16 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Emma Mobile EV2 processor support * * Copyright (C) 2012 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include #include diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c index 319ca9508ec6..14867226f8f4 100644 --- a/arch/arm/mach-shmobile/setup-r7s72100.c +++ b/arch/arm/mach-shmobile/setup-r7s72100.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * r7s72100 processor support * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index 20173c4f415d..23a29a0ea9c9 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * r8a73a4 processor support * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include @@ -26,7 +18,6 @@ static const char *const r8a73a4_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)") - .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .dt_compat = r8a73a4_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 3849eef0d3a7..787d039b5a07 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * R8A7740 processor support * * Copyright (C) 2011 Renesas Solutions Corp. * Copyright (C) 2011 Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include #include diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 7fa4a0b5f654..ce51794f64c7 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -1,18 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * r8a7778 processor support * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 0686112f2435..d589326099e0 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -1,18 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * r8a7779 processor support * * Copyright (C) 2011, 2013 Renesas Solutions Corp. * Copyright (C) 2011 Magnus Damm * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include #include diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c deleted file mode 100644 index 78d3e859bd64..000000000000 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * r8a7790 processor support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include - -#include - -#include "common.h" -#include "r8a7790.h" -#include "rcar-gen2.h" - -static const char * const r8a7790_boards_compat_dt[] __initconst = { - "renesas,r8a7790", - NULL, -}; - -DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") - .smp_init = smp_init_ops(shmobile_smp_init_fallback_ops), - .smp = smp_ops(r8a7790_smp_ops), - .init_early = shmobile_init_delay, - .init_time = rcar_gen2_timer_init, - .init_late = shmobile_init_late, - .reserve = rcar_gen2_reserve, - .dt_compat = r8a7790_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c deleted file mode 100644 index 26e2d181a190..000000000000 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * r8a7791 processor support - * - * Copyright (C) 2013 Renesas Electronics Corporation - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include - -#include - -#include "common.h" -#include "r8a7791.h" -#include "rcar-gen2.h" - -static const char *const r8a7791_boards_compat_dt[] __initconst = { - "renesas,r8a7791", - NULL, -}; - -DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") - .smp_init = smp_init_ops(shmobile_smp_init_fallback_ops), - .smp = smp_ops(r8a7791_smp_ops), - .init_early = shmobile_init_delay, - .init_time = rcar_gen2_timer_init, - .init_late = shmobile_init_late, - .reserve = rcar_gen2_reserve, - .dt_compat = r8a7791_boards_compat_dt, -MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 88fdc1801d90..013acc97795c 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -1,18 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * R-Car Generation 2 support * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Magnus Damm * Copyright (C) 2014 Ulrich Hecht - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include @@ -67,7 +59,6 @@ static unsigned int __init get_extal_freq(void) void __init rcar_gen2_timer_init(void) { -#ifdef CONFIG_ARM_ARCH_TIMER void __iomem *base; u32 freq; @@ -109,7 +100,6 @@ void __init rcar_gen2_timer_init(void) } iounmap(base); -#endif /* CONFIG_ARM_ARCH_TIMER */ of_clk_init(NULL); timer_probe(); @@ -186,10 +176,8 @@ void __init rcar_gen2_reserve(void) } static const char * const rcar_gen2_boards_compat_dt[] __initconst = { - /* - * R8A7790 and R8A7791 can't be handled here as long as they need SMP - * initialization fallback. - */ + "renesas,r8a7790", + "renesas,r8a7791", "renesas,r8a7792", "renesas,r8a7793", "renesas,r8a7794", @@ -197,7 +185,6 @@ static const char * const rcar_gen2_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(RCAR_GEN2_DT, "Generic R-Car Gen2 (Flattened Device Tree)") - .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .init_time = rcar_gen2_timer_init, .reserve = rcar_gen2_reserve, @@ -212,7 +199,6 @@ static const char * const rz_g1_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(RZ_G1_DT, "Generic RZ/G1 (Flattened Device Tree)") - .init_early = shmobile_init_delay, .init_late = shmobile_init_late, .init_time = rcar_gen2_timer_init, .reserve = rcar_gen2_reserve, diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index a25ff188e403..cc08aa752244 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -1,18 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * sh73a0 processor support * * Copyright (C) 2010 Takashi Yoshii * Copyright (C) 2010 Magnus Damm * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include #include diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 3a732199cf5e..3853ecea44ca 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SMP support for Emma Mobile EV2 * * Copyright (C) 2012 Renesas Solutions Corp. * Copyright (C) 2012 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include #include diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index c6951ee24588..0ed73b650c14 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -1,17 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SMP support for R-Mobile / SH-Mobile - r8a7779 portion * * Copyright (C) 2011 Renesas Solutions Corp. * Copyright (C) 2011 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include #include @@ -31,59 +23,13 @@ #define AVECR IOMEM(0xfe700040) #define R8A7779_SCU_BASE 0xf0000000 -static const struct rcar_sysc_ch r8a7779_ch_cpu1 = { - .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ - .chan_bit = 1, /* ARM1 */ - .isr_bit = 1, /* ARM1 */ -}; - -static const struct rcar_sysc_ch r8a7779_ch_cpu2 = { - .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ - .chan_bit = 2, /* ARM2 */ - .isr_bit = 2, /* ARM2 */ -}; - -static const struct rcar_sysc_ch r8a7779_ch_cpu3 = { - .chan_offs = 0x40, /* PWRSR0 .. PWRER0 */ - .chan_bit = 3, /* ARM3 */ - .isr_bit = 3, /* ARM3 */ -}; - -static const struct rcar_sysc_ch * const r8a7779_ch_cpu[4] = { - [1] = &r8a7779_ch_cpu1, - [2] = &r8a7779_ch_cpu2, - [3] = &r8a7779_ch_cpu3, -}; - -static int r8a7779_platform_cpu_kill(unsigned int cpu) +static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { - const struct rcar_sysc_ch *ch = NULL; int ret = -EIO; cpu = cpu_logical_map(cpu); - - if (cpu < ARRAY_SIZE(r8a7779_ch_cpu)) - ch = r8a7779_ch_cpu[cpu]; - - if (ch) - ret = rcar_sysc_power_down(ch); - - return ret ? ret : 1; -} - -static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - const struct rcar_sysc_ch *ch = NULL; - unsigned int lcpu = cpu_logical_map(cpu); - int ret; - - if (lcpu < ARRAY_SIZE(r8a7779_ch_cpu)) - ch = r8a7779_ch_cpu[lcpu]; - - if (ch) - ret = rcar_sysc_power_up(ch); - else - ret = -EIO; + if (cpu) + ret = rcar_sysc_power_up_cpu(cpu); return ret; } @@ -95,16 +41,20 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) /* setup r8a7779 specific SCU bits */ shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus); - - r8a7779_pm_init(); - - /* power off secondary CPUs */ - r8a7779_platform_cpu_kill(1); - r8a7779_platform_cpu_kill(2); - r8a7779_platform_cpu_kill(3); } #ifdef CONFIG_HOTPLUG_CPU +static int r8a7779_platform_cpu_kill(unsigned int cpu) +{ + int ret = -EIO; + + cpu = cpu_logical_map(cpu); + if (cpu) + ret = rcar_sysc_power_down_cpu(cpu); + + return ret ? ret : 1; +} + static int r8a7779_cpu_kill(unsigned int cpu) { if (shmobile_smp_scu_cpu_kill(cpu)) diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c deleted file mode 100644 index 28f26d5362d8..000000000000 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * SMP support for r8a7790 - * - * Copyright (C) 2012-2013 Renesas Solutions Corp. - * Copyright (C) 2012 Takashi Yoshii - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include -#include -#include -#include -#include - -#include - -#include "common.h" -#include "platsmp-apmu.h" -#include "rcar-gen2.h" -#include "r8a7790.h" - -static const struct rcar_sysc_ch r8a7790_ca15_scu = { - .chan_offs = 0x180, /* PWRSR5 .. PWRER5 */ - .isr_bit = 12, /* CA15-SCU */ -}; - -static const struct rcar_sysc_ch r8a7790_ca7_scu = { - .chan_offs = 0x100, /* PWRSR3 .. PWRER3 */ - .isr_bit = 21, /* CA7-SCU */ -}; - -static struct rcar_apmu_config r8a7790_apmu_config[] = { - { - .iomem = DEFINE_RES_MEM(0xe6152000, 0x188), - .cpus = { 0, 1, 2, 3 }, - }, - { - .iomem = DEFINE_RES_MEM(0xe6151000, 0x188), - .cpus = { 0x100, 0x0101, 0x102, 0x103 }, - } -}; - -static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus) -{ - /* let APMU code install data related to shmobile_boot_vector */ - shmobile_smp_apmu_prepare_cpus(max_cpus, - r8a7790_apmu_config, - ARRAY_SIZE(r8a7790_apmu_config)); - - /* turn on power to SCU */ - rcar_gen2_pm_init(); - rcar_sysc_power_up(&r8a7790_ca15_scu); - rcar_sysc_power_up(&r8a7790_ca7_scu); -} - -const struct smp_operations r8a7790_smp_ops __initconst = { - .smp_prepare_cpus = r8a7790_smp_prepare_cpus, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_can_disable = shmobile_smp_cpu_can_disable, - .cpu_die = shmobile_smp_apmu_cpu_die, - .cpu_kill = shmobile_smp_apmu_cpu_kill, -#endif -}; diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c deleted file mode 100644 index 2948c22cfc53..000000000000 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * SMP support for r8a7791 - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include -#include -#include -#include - -#include - -#include "common.h" -#include "platsmp-apmu.h" -#include "r8a7791.h" -#include "rcar-gen2.h" - -static struct rcar_apmu_config r8a7791_apmu_config[] = { - { - .iomem = DEFINE_RES_MEM(0xe6152000, 0x188), - .cpus = { 0, 1 }, - } -}; - -static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) -{ - /* let APMU code install data related to shmobile_boot_vector */ - shmobile_smp_apmu_prepare_cpus(max_cpus, - r8a7791_apmu_config, - ARRAY_SIZE(r8a7791_apmu_config)); - - rcar_gen2_pm_init(); -} - -const struct smp_operations r8a7791_smp_ops __initconst = { - .smp_prepare_cpus = r8a7791_smp_prepare_cpus, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_can_disable = shmobile_smp_cpu_can_disable, - .cpu_die = shmobile_smp_apmu_cpu_die, - .cpu_kill = shmobile_smp_apmu_cpu_kill, -#endif -}; diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 6196a6380385..828e8aea037e 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -32,14 +32,6 @@ void __init shmobile_init_delay(void) for_each_child_of_node(cpus, np) { u32 freq; - if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER) && - (of_device_is_compatible(np, "arm,cortex-a7") || - of_device_is_compatible(np, "arm,cortex-a15"))) { - of_node_put(np); - of_node_put(cpus); - return; - } - if (!of_property_read_u32(np, "clock-frequency", &freq)) max_freq = max(max_freq, freq); } diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 779235a9147d..e661d2626675 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -9,6 +9,7 @@ config ARCH_UNIPHIER select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP select PINCTRL + select RESET_CONTROLLER help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile deleted file mode 100644 index e69de29bb2d1..000000000000 diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index d5aeac351fc3..f34cd1b42d69 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -261,6 +261,7 @@ config ARCH_UNIPHIER bool "Socionext UniPhier SoC Family" select ARCH_HAS_RESET_CONTROLLER select PINCTRL + select RESET_CONTROLLER help This enables support for Socionext UniPhier SoC family. diff --git a/drivers/clk/davinci/psc-da830.c b/drivers/clk/davinci/psc-da830.c index 081b039fcb02..6481337382a6 100644 --- a/drivers/clk/davinci/psc-da830.c +++ b/drivers/clk/davinci/psc-da830.c @@ -14,6 +14,7 @@ #include "psc.h" +LPSC_CLKDEV1(aemif_clkdev, NULL, "ti-aemif"); LPSC_CLKDEV1(spi0_clkdev, NULL, "spi_davinci.0"); LPSC_CLKDEV1(mmcsd_clkdev, NULL, "da830-mmc.0"); LPSC_CLKDEV1(uart0_clkdev, NULL, "serial8250.0"); @@ -22,7 +23,7 @@ static const struct davinci_lpsc_clk_info da830_psc0_info[] = { LPSC(0, 0, tpcc, pll0_sysclk2, NULL, LPSC_ALWAYS_ENABLED), LPSC(1, 0, tptc0, pll0_sysclk2, NULL, LPSC_ALWAYS_ENABLED), LPSC(2, 0, tptc1, pll0_sysclk2, NULL, LPSC_ALWAYS_ENABLED), - LPSC(3, 0, aemif, pll0_sysclk3, NULL, LPSC_ALWAYS_ENABLED), + LPSC(3, 0, aemif, pll0_sysclk3, aemif_clkdev, LPSC_ALWAYS_ENABLED), LPSC(4, 0, spi0, pll0_sysclk2, spi0_clkdev, 0), LPSC(5, 0, mmcsd, pll0_sysclk2, mmcsd_clkdev, 0), LPSC(6, 0, aintc, pll0_sysclk4, NULL, LPSC_ALWAYS_ENABLED), diff --git a/drivers/clk/davinci/psc-da850.c b/drivers/clk/davinci/psc-da850.c index d196dcbed560..5a18bca464cd 100644 --- a/drivers/clk/davinci/psc-da850.c +++ b/drivers/clk/davinci/psc-da850.c @@ -16,8 +16,7 @@ #include "psc.h" -LPSC_CLKDEV2(emifa_clkdev, NULL, "ti-aemif", - "aemif", "davinci_nand.0"); +LPSC_CLKDEV1(emifa_clkdev, NULL, "ti-aemif"); LPSC_CLKDEV1(spi0_clkdev, NULL, "spi_davinci.0"); LPSC_CLKDEV1(mmcsd0_clkdev, NULL, "da830-mmc.0"); LPSC_CLKDEV1(uart0_clkdev, NULL, "serial8250.0"); diff --git a/drivers/clk/davinci/psc-dm365.c b/drivers/clk/davinci/psc-dm365.c index 8c73086cc676..c75424f4ea3b 100644 --- a/drivers/clk/davinci/psc-dm365.c +++ b/drivers/clk/davinci/psc-dm365.c @@ -21,7 +21,8 @@ LPSC_CLKDEV1(mmcsd1_clkdev, NULL, "da830-mmc.1"); LPSC_CLKDEV1(asp0_clkdev, NULL, "davinci-mcbsp"); LPSC_CLKDEV1(usb_clkdev, "usb", NULL); LPSC_CLKDEV1(spi2_clkdev, NULL, "spi_davinci.2"); -LPSC_CLKDEV1(aemif_clkdev, "aemif", NULL); +LPSC_CLKDEV2(aemif_clkdev, "aemif", NULL, + NULL, "ti-aemif"); LPSC_CLKDEV1(mmcsd0_clkdev, NULL, "da830-mmc.0"); LPSC_CLKDEV1(i2c_clkdev, NULL, "i2c_davinci.1"); LPSC_CLKDEV1(uart0_clkdev, NULL, "serial8250.0"); diff --git a/drivers/clk/davinci/psc-dm644x.c b/drivers/clk/davinci/psc-dm644x.c index fc0230e3a3d6..0cea6e0bd5f0 100644 --- a/drivers/clk/davinci/psc-dm644x.c +++ b/drivers/clk/davinci/psc-dm644x.c @@ -21,7 +21,8 @@ LPSC_CLKDEV2(emac_clkdev, NULL, "davinci_emac.1", "fck", "davinci_mdio.0"); LPSC_CLKDEV1(usb_clkdev, "usb", NULL); LPSC_CLKDEV1(ide_clkdev, NULL, "palm_bk3710"); -LPSC_CLKDEV1(aemif_clkdev, "aemif", NULL); +LPSC_CLKDEV2(aemif_clkdev, "aemif", NULL, + NULL, "ti-aemif"); LPSC_CLKDEV1(mmcsd_clkdev, NULL, "dm6441-mmc.0"); LPSC_CLKDEV1(asp0_clkdev, NULL, "davinci-mcbsp"); LPSC_CLKDEV1(i2c_clkdev, NULL, "i2c_davinci.1"); diff --git a/drivers/clk/davinci/psc-dm646x.c b/drivers/clk/davinci/psc-dm646x.c index c3f82ed70a80..20012dc7471a 100644 --- a/drivers/clk/davinci/psc-dm646x.c +++ b/drivers/clk/davinci/psc-dm646x.c @@ -18,7 +18,8 @@ LPSC_CLKDEV1(ide_clkdev, NULL, "palm_bk3710"); LPSC_CLKDEV2(emac_clkdev, NULL, "davinci_emac.1", "fck", "davinci_mdio.0"); -LPSC_CLKDEV1(aemif_clkdev, "aemif", NULL); +LPSC_CLKDEV2(aemif_clkdev, "aemif", NULL, + NULL, "ti-aemif"); LPSC_CLKDEV1(mcasp0_clkdev, NULL, "davinci-mcasp.0"); LPSC_CLKDEV1(mcasp1_clkdev, NULL, "davinci-mcasp.1"); LPSC_CLKDEV1(uart0_clkdev, NULL, "serial8250.0"); diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 3df501c3421b..f8663d7891f2 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -20,32 +20,33 @@ * However, when used with the E3 mailboard that producecs non-standard * scancodes, a custom key table must be prepared and loaded from userspace. */ -#include #include +#include +#include +#include #include #include #include -#include -#include - -#include +#define DRIVER_NAME "ams-delta-serio" MODULE_AUTHOR("Matt Callow"); MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver"); MODULE_LICENSE("GPL"); -static struct serio *ams_delta_serio; +struct ams_delta_serio { + struct serio *serio; + struct regulator *vcc; + unsigned int *fiq_buffer; +}; -static int check_data(int data) +static int check_data(struct serio *serio, int data) { int i, parity = 0; /* check valid stop bit */ if (!(data & 0x400)) { - dev_warn(&ams_delta_serio->dev, - "invalid stop bit, data=0x%X\n", - data); + dev_warn(&serio->dev, "invalid stop bit, data=0x%X\n", data); return SERIO_FRAME; } /* calculate the parity */ @@ -55,9 +56,9 @@ static int check_data(int data) } /* it should be odd */ if (!(parity & 0x01)) { - dev_warn(&ams_delta_serio->dev, - "parity check failed, data=0x%X parity=0x%X\n", - data, parity); + dev_warn(&serio->dev, + "parity check failed, data=0x%X parity=0x%X\n", data, + parity); return SERIO_PARITY; } return 0; @@ -65,127 +66,130 @@ static int check_data(int data) static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id) { - int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF]; + struct ams_delta_serio *priv = dev_id; + int *circ_buff = &priv->fiq_buffer[FIQ_CIRC_BUFF]; int data, dfl; u8 scancode; - fiq_buffer[FIQ_IRQ_PEND] = 0; + priv->fiq_buffer[FIQ_IRQ_PEND] = 0; /* * Read data from the circular buffer, check it * and then pass it on the serio */ - while (fiq_buffer[FIQ_KEYS_CNT] > 0) { + while (priv->fiq_buffer[FIQ_KEYS_CNT] > 0) { - data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++]; - fiq_buffer[FIQ_KEYS_CNT]--; - if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN]) - fiq_buffer[FIQ_HEAD_OFFSET] = 0; + data = circ_buff[priv->fiq_buffer[FIQ_HEAD_OFFSET]++]; + priv->fiq_buffer[FIQ_KEYS_CNT]--; + if (priv->fiq_buffer[FIQ_HEAD_OFFSET] == + priv->fiq_buffer[FIQ_BUF_LEN]) + priv->fiq_buffer[FIQ_HEAD_OFFSET] = 0; - dfl = check_data(data); + dfl = check_data(priv->serio, data); scancode = (u8) (data >> 1) & 0xFF; - serio_interrupt(ams_delta_serio, scancode, dfl); + serio_interrupt(priv->serio, scancode, dfl); } return IRQ_HANDLED; } static int ams_delta_serio_open(struct serio *serio) { - /* enable keyboard */ - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1); + struct ams_delta_serio *priv = serio->port_data; - return 0; + /* enable keyboard */ + return regulator_enable(priv->vcc); } static void ams_delta_serio_close(struct serio *serio) { + struct ams_delta_serio *priv = serio->port_data; + /* disable keyboard */ - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0); + regulator_disable(priv->vcc); } -static const struct gpio ams_delta_gpios[] __initconst_or_module = { - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATA, - .flags = GPIOF_DIR_IN, - .label = "serio-data", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK, - .flags = GPIOF_DIR_IN, - .label = "serio-clock", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, - .flags = GPIOF_OUT_INIT_LOW, - .label = "serio-power", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, - .flags = GPIOF_OUT_INIT_LOW, - .label = "serio-dataout", - }, -}; - -static int __init ams_delta_serio_init(void) +static int ams_delta_serio_init(struct platform_device *pdev) { - int err; + struct ams_delta_serio *priv; + struct serio *serio; + int irq, err; - if (!machine_is_ams_delta()) - return -ENODEV; - - ams_delta_serio = kzalloc(sizeof(struct serio), GFP_KERNEL); - if (!ams_delta_serio) + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) return -ENOMEM; - ams_delta_serio->id.type = SERIO_8042; - ams_delta_serio->open = ams_delta_serio_open; - ams_delta_serio->close = ams_delta_serio_close; - strlcpy(ams_delta_serio->name, "AMS DELTA keyboard adapter", - sizeof(ams_delta_serio->name)); - strlcpy(ams_delta_serio->phys, "GPIO/serio0", - sizeof(ams_delta_serio->phys)); + priv->fiq_buffer = pdev->dev.platform_data; + if (!priv->fiq_buffer) + return -EINVAL; - err = gpio_request_array(ams_delta_gpios, - ARRAY_SIZE(ams_delta_gpios)); - if (err) { - pr_err("ams_delta_serio: Couldn't request gpio pins\n"); - goto serio; + priv->vcc = devm_regulator_get(&pdev->dev, "vcc"); + if (IS_ERR(priv->vcc)) { + err = PTR_ERR(priv->vcc); + dev_err(&pdev->dev, "regulator request failed (%d)\n", err); + /* + * When running on a non-dt platform and requested regulator + * is not available, devm_regulator_get() never returns + * -EPROBE_DEFER as it is not able to justify if the regulator + * may still appear later. On the other hand, the board can + * still set full constriants flag at late_initcall in order + * to instruct devm_regulator_get() to returnn a dummy one + * if sufficient. Hence, if we get -ENODEV here, let's convert + * it to -EPROBE_DEFER and wait for the board to decide or + * let Deferred Probe infrastructure handle this error. + */ + if (err == -ENODEV) + err = -EPROBE_DEFER; + return err; } - err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), - ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING, - "ams-delta-serio", 0); + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENXIO; + + err = devm_request_irq(&pdev->dev, irq, ams_delta_serio_interrupt, + IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv); if (err < 0) { - pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n", - gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); - goto gpio; + dev_err(&pdev->dev, "IRQ request failed (%d)\n", err); + return err; } - /* - * Since GPIO register handling for keyboard clock pin is performed - * at FIQ level, switch back from edge to simple interrupt handler - * to avoid bad interaction. - */ - irq_set_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), - handle_simple_irq); - serio_register_port(ams_delta_serio); - dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name); + serio = kzalloc(sizeof(*serio), GFP_KERNEL); + if (!serio) + return -ENOMEM; + + priv->serio = serio; + + serio->id.type = SERIO_8042; + serio->open = ams_delta_serio_open; + serio->close = ams_delta_serio_close; + strlcpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name)); + strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys)); + serio->dev.parent = &pdev->dev; + serio->port_data = priv; + + serio_register_port(serio); + + platform_set_drvdata(pdev, priv); + + dev_info(&serio->dev, "%s\n", serio->name); return 0; -gpio: - gpio_free_array(ams_delta_gpios, - ARRAY_SIZE(ams_delta_gpios)); -serio: - kfree(ams_delta_serio); - return err; } -module_init(ams_delta_serio_init); -static void __exit ams_delta_serio_exit(void) +static int ams_delta_serio_exit(struct platform_device *pdev) { - serio_unregister_port(ams_delta_serio); - free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0); - gpio_free_array(ams_delta_gpios, - ARRAY_SIZE(ams_delta_gpios)); + struct ams_delta_serio *priv = platform_get_drvdata(pdev); + + serio_unregister_port(priv->serio); + + return 0; } -module_exit(ams_delta_serio_exit); + +static struct platform_driver ams_delta_serio_driver = { + .probe = ams_delta_serio_init, + .remove = ams_delta_serio_exit, + .driver = { + .name = DRIVER_NAME + }, +}; +module_platform_driver(ams_delta_serio_driver); diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c index 05157442a980..b1b53f6c452f 100644 --- a/drivers/net/ethernet/smsc/smc911x.c +++ b/drivers/net/ethernet/smsc/smc911x.c @@ -74,7 +74,6 @@ static const char version[] = #include #include -#include #include @@ -1795,7 +1794,6 @@ static int smc911x_probe(struct net_device *dev) #ifdef SMC_USE_DMA struct dma_slave_config config; dma_cap_mask_t mask; - struct pxad_param param; #endif DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); @@ -1971,15 +1969,8 @@ static int smc911x_probe(struct net_device *dev) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - param.prio = PXAD_PRIO_LOWEST; - param.drcmr = -1UL; - - lp->rxdma = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶m, &dev->dev, "rx"); - lp->txdma = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶m, &dev->dev, "tx"); + lp->rxdma = dma_request_channel(mask, NULL, NULL); + lp->txdma = dma_request_channel(mask, NULL, NULL); lp->rxdma_active = 0; lp->txdma_active = 0; diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 080428762858..b944828f9ea3 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2019,17 +2019,10 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr, # endif if (lp->cfg.flags & SMC91X_USE_DMA) { dma_cap_mask_t mask; - struct pxad_param param; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - param.prio = PXAD_PRIO_LOWEST; - param.drcmr = -1UL; - - lp->dma_chan = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶m, &dev->dev, - "data"); + lp->dma_chan = dma_request_channel(mask, NULL, NULL); } #endif diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index b337ee97e0c0..a27352229fc2 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -301,7 +301,6 @@ struct smc_local { * as RX which can overrun memory and lose packets. */ #include -#include #ifdef SMC_insl #undef SMC_insl diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index 7dc0f20d7907..c37b0803c1b6 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -18,6 +18,9 @@ obj-$(CONFIG_SYSC_R8A77970) += r8a77970-sysc.o obj-$(CONFIG_SYSC_R8A77980) += r8a77980-sysc.o obj-$(CONFIG_SYSC_R8A77990) += r8a77990-sysc.o obj-$(CONFIG_SYSC_R8A77995) += r8a77995-sysc.o +ifdef CONFIG_SMP +obj-$(CONFIG_ARCH_R9A06G032) += r9a06g032-smp.o +endif # Family obj-$(CONFIG_RST_RCAR) += rcar-rst.o diff --git a/drivers/soc/renesas/r9a06g032-smp.c b/drivers/soc/renesas/r9a06g032-smp.c new file mode 100644 index 000000000000..a1926e8d73f2 --- /dev/null +++ b/drivers/soc/renesas/r9a06g032-smp.c @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * R9A06G032 Second CA7 enabler. + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + * Michel Pollet , + * Derived from actions,s500-smp + */ + +#include +#include +#include +#include + +/* + * The second CPU is parked in ROM at boot time. It requires waking it after + * writing an address into the BOOTADDR register of sysctrl. + * + * So the default value of the "cpu-release-addr" corresponds to BOOTADDR... + * + * *However* the BOOTADDR register is not available when the kernel + * starts in NONSEC mode. + * + * So for NONSEC mode, the bootloader re-parks the second CPU into a pen + * in SRAM, and changes the "cpu-release-addr" of linux's DT to a SRAM address, + * which is not restricted. + */ + +static void __iomem *cpu_bootaddr; + +static DEFINE_SPINLOCK(cpu_lock); + +static int +r9a06g032_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (!cpu_bootaddr) + return -ENODEV; + + spin_lock(&cpu_lock); + + writel(__pa_symbol(secondary_startup), cpu_bootaddr); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + spin_unlock(&cpu_lock); + + return 0; +} + +static void __init r9a06g032_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *dn; + int ret = -EINVAL, dns; + u32 bootaddr; + + dn = of_get_cpu_node(1, NULL); + if (!dn) { + pr_err("CPU#1: missing device tree node\n"); + return; + } + /* + * Determine the address from which the CPU is polling. + * The bootloader *does* change this property. + * Note: The property can be either 64 or 32 bits, so handle both cases + */ + if (of_find_property(dn, "cpu-release-addr", &dns)) { + if (dns == sizeof(u64)) { + u64 temp; + + ret = of_property_read_u64(dn, + "cpu-release-addr", &temp); + bootaddr = temp; + } else { + ret = of_property_read_u32(dn, + "cpu-release-addr", + &bootaddr); + } + } + of_node_put(dn); + if (ret) { + pr_err("CPU#1: invalid cpu-release-addr property\n"); + return; + } + pr_info("CPU#1: cpu-release-addr %08x\n", bootaddr); + + cpu_bootaddr = ioremap(bootaddr, sizeof(bootaddr)); +} + +static const struct smp_operations r9a06g032_smp_ops __initconst = { + .smp_prepare_cpus = r9a06g032_smp_prepare_cpus, + .smp_boot_secondary = r9a06g032_smp_boot_secondary, +}; + +CPU_METHOD_OF_DECLARE(r9a06g032_smp, + "renesas,r9a06g032-smp", &r9a06g032_smp_ops); diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 50d03d8b4f9a..029188e8be6e 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -58,6 +58,12 @@ #define RCAR_PD_ALWAYS_ON 32 /* Always-on power area */ +struct rcar_sysc_ch { + u16 chan_offs; + u8 chan_bit; + u8 isr_bit; +}; + static void __iomem *rcar_sysc_base; static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */ @@ -143,12 +149,12 @@ static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on) return ret; } -int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch) +static int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch) { return rcar_sysc_power(sysc_ch, false); } -int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch) +static int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch) { return rcar_sysc_power(sysc_ch, true); } @@ -315,6 +321,8 @@ struct rcar_pm_domains { struct generic_pm_domain *domains[RCAR_PD_ALWAYS_ON + 1]; }; +static struct genpd_onecell_data *rcar_sysc_onecell_data; + static int __init rcar_sysc_pd_init(void) { const struct rcar_sysc_info *info; @@ -326,9 +334,6 @@ static int __init rcar_sysc_pd_init(void) unsigned int i; int error; - if (rcar_sysc_base) - return 0; - np = of_find_matching_node_and_match(NULL, rcar_sysc_matches, &match); if (!np) return -ENODEV; @@ -361,6 +366,7 @@ static int __init rcar_sysc_pd_init(void) domains->onecell_data.domains = domains->domains; domains->onecell_data.num_domains = ARRAY_SIZE(domains->domains); + rcar_sysc_onecell_data = &domains->onecell_data; for (i = 0, syscier = 0; i < info->num_areas; i++) syscier |= BIT(info->areas[i].isr_bit); @@ -448,27 +454,39 @@ void __init rcar_sysc_nullify(struct rcar_sysc_area *areas, } } -void __init rcar_sysc_init(phys_addr_t base, u32 syscier) +#ifdef CONFIG_ARCH_R8A7779 +static int rcar_sysc_power_cpu(unsigned int idx, bool on) { - u32 syscimr; + struct generic_pm_domain *genpd; + struct rcar_sysc_pd *pd; + unsigned int i; - if (!rcar_sysc_pd_init()) - return; + if (!rcar_sysc_onecell_data) + return -ENODEV; - rcar_sysc_base = ioremap_nocache(base, PAGE_SIZE); + for (i = 0; i < rcar_sysc_onecell_data->num_domains; i++) { + genpd = rcar_sysc_onecell_data->domains[i]; + if (!genpd) + continue; - /* - * Mask all interrupt sources to prevent the CPU from receiving them. - * Make sure not to clear reserved bits that were set before. - */ - syscimr = ioread32(rcar_sysc_base + SYSCIMR); - syscimr |= syscier; - pr_debug("%s: syscimr = 0x%08x\n", __func__, syscimr); - iowrite32(syscimr, rcar_sysc_base + SYSCIMR); + pd = to_rcar_pd(genpd); + if (!(pd->flags & PD_CPU) || pd->ch.chan_bit != idx) + continue; - /* - * SYSC needs all interrupt sources enabled to control power. - */ - pr_debug("%s: syscier = 0x%08x\n", __func__, syscier); - iowrite32(syscier, rcar_sysc_base + SYSCIER); + return on ? rcar_sysc_power_up(&pd->ch) + : rcar_sysc_power_down(&pd->ch); + } + + return -ENOENT; } + +int rcar_sysc_power_down_cpu(unsigned int cpu) +{ + return rcar_sysc_power_cpu(cpu, false); +} + +int rcar_sysc_power_up_cpu(unsigned int cpu) +{ + return rcar_sysc_power_cpu(cpu, true); +} +#endif /* CONFIG_ARCH_R8A7779 */ diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c index 652739c7f718..d0dab323651f 100644 --- a/drivers/soc/ti/pm33xx.c +++ b/drivers/soc/ti/pm33xx.c @@ -41,6 +41,8 @@ static struct am33xx_pm_sram_addr *pm_sram; static struct device *pm33xx_dev; static struct wkup_m3_ipc *m3_ipc; +static unsigned long suspend_wfi_flags; + static u32 sram_suspend_address(unsigned long addr) { return ((unsigned long)am33xx_do_wfi_sram + @@ -53,7 +55,7 @@ static int am33xx_pm_suspend(suspend_state_t suspend_state) int i, ret = 0; ret = pm_ops->soc_suspend((unsigned long)suspend_state, - am33xx_do_wfi_sram); + am33xx_do_wfi_sram, suspend_wfi_flags); if (ret) { dev_err(pm33xx_dev, "PM: Kernel suspend failure\n"); @@ -227,6 +229,7 @@ static int am33xx_push_sram_idle(void) ro_sram_data.amx3_pm_sram_data_virt = ocmcram_location_data; ro_sram_data.amx3_pm_sram_data_phys = gen_pool_virt_to_phys(sram_pool_data, ocmcram_location_data); + ro_sram_data.rtc_base_virt = pm_ops->get_rtc_base_addr(); /* Save physical address to calculate resume offset during pm init */ am33xx_do_wfi_sram_phys = gen_pool_virt_to_phys(sram_pool, @@ -310,6 +313,17 @@ static int am33xx_pm_probe(struct platform_device *pdev) suspend_set_ops(&am33xx_pm_ops); #endif /* CONFIG_SUSPEND */ + /* + * For a system suspend we must flush the caches, we want + * the DDR in self-refresh, we want to save the context + * of the EMIF, and we want the wkup_m3 to handle low-power + * transition. + */ + suspend_wfi_flags |= WFI_FLAG_FLUSH_CACHE; + suspend_wfi_flags |= WFI_FLAG_SELF_REFRESH; + suspend_wfi_flags |= WFI_FLAG_SAVE_EMIF; + suspend_wfi_flags |= WFI_FLAG_WAKE_M3; + ret = pm_ops->init(); if (ret) { dev_err(dev, "Unable to call core pm init!\n"); diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h index 6aca5ce8a99a..931ab05f771d 100644 --- a/include/linux/clk/at91_pmc.h +++ b/include/linux/clk/at91_pmc.h @@ -47,8 +47,10 @@ #define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */ +#define AT91_PMC_WAITMODE (1 << 2) /* Wait Mode Command */ #define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +#define AT91_PMC_KEY_MASK (0xff << 16) #define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */ #define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */ #define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */ @@ -155,6 +157,19 @@ #define AT91_PMC_GCKRDY (1 << 24) /* Generated Clocks */ #define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */ +#define AT91_PMC_FSMR 0x70 /* Fast Startup Mode Register */ +#define AT91_PMC_FSTT(n) BIT(n) +#define AT91_PMC_RTCAL BIT(17) /* RTC Alarm Enable */ +#define AT91_PMC_USBAL BIT(18) /* USB Resume Enable */ +#define AT91_PMC_SDMMC_CD BIT(19) /* SDMMC Card Detect Enable */ +#define AT91_PMC_LPM BIT(20) /* Low-power Mode */ +#define AT91_PMC_RXLP_MCE BIT(24) /* Backup UART Receive Enable */ +#define AT91_PMC_ACC_CE BIT(25) /* ACC Enable */ + +#define AT91_PMC_FSPR 0x74 /* Fast Startup Polarity Reg */ + +#define AT91_PMC_FS_INPUT_MASK 0x7ff + #define AT91_PMC_PLLICPR 0x80 /* PLL Charge Pump Current Register */ #define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */ diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index c49843c4d031..caf40ad0bbc6 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -144,6 +144,7 @@ enum cpuhp_state { CPUHP_AP_SMPBOOT_THREADS, CPUHP_AP_X86_VDSO_VMA_ONLINE, CPUHP_AP_IRQ_AFFINITY_ONLINE, + CPUHP_AP_ARM_MVEBU_SYNC_CLOCKS, CPUHP_AP_PERF_ONLINE, CPUHP_AP_PERF_X86_ONLINE, CPUHP_AP_PERF_X86_UNCORE_ONLINE, diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index e06f5f79eaef..6c1ad160ed87 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -457,4 +457,7 @@ #define MCLK_DIR(x) (x == 1 ? IMX6UL_GPR1_SAI1_MCLK_DIR : x == 2 ? \ IMX6UL_GPR1_SAI2_MCLK_DIR : IMX6UL_GPR1_SAI3_MCLK_DIR) +/* For imx6sll iomux gpr register field define */ +#define IMX6SLL_GPR5_AFCG_X_BYPASS_MASK (0x1f << 11) + #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/include/linux/platform_data/ams-delta-fiq.h similarity index 68% rename from arch/arm/mach-omap1/include/mach/ams-delta-fiq.h rename to include/linux/platform_data/ams-delta-fiq.h index 6dfc3e1210a3..cf4589ccb720 100644 --- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h +++ b/include/linux/platform_data/ams-delta-fiq.h @@ -1,5 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + /* - * arch/arm/mach-omap1/include/ams-delta-fiq.h + * include/linux/platform_data/ams-delta-fiq.h * * Taken from the original Amstrad modifications to fiq.h * @@ -11,24 +13,8 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __AMS_DELTA_FIQ_H -#define __AMS_DELTA_FIQ_H - -#include - -/* - * Interrupt number used for passing control from FIQ to IRQ. - * IRQ12, described as reserved, has been selected. - */ -#define INT_DEFERRED_FIQ INT_1510_RES12 -/* - * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to. - */ -#if (INT_DEFERRED_FIQ < IH2_BASE) -#define DEFERRED_FIQ_IH_BASE OMAP_IH1_BASE -#else -#define DEFERRED_FIQ_IH_BASE OMAP_IH2_BASE -#endif +#ifndef __LINUX_PLATFORM_DATA_AMS_DELTA_FIQ_H +#define __LINUX_PLATFORM_DATA_AMS_DELTA_FIQ_H /* * These are the offsets from the beginning of the fiq_buffer. They are put here @@ -69,11 +55,4 @@ #define FIQ_CIRC_BUFF 30 /*Start of circular buffer */ -#ifndef __ASSEMBLER__ -extern unsigned int fiq_buffer[]; -extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end; - -extern void __init ams_delta_init_fiq(void); -#endif - #endif diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h index 97948ac2bb9b..a403dd51dacc 100644 --- a/include/linux/platform_data/mtd-davinci-aemif.h +++ b/include/linux/platform_data/mtd-davinci-aemif.h @@ -33,5 +33,4 @@ struct davinci_aemif_timing { u8 ta; }; -int davinci_aemif_setup(struct platform_device *pdev); #endif diff --git a/include/linux/platform_data/pm33xx.h b/include/linux/platform_data/pm33xx.h index f9bed2a0af9d..fbf5ed73c7cc 100644 --- a/include/linux/platform_data/pm33xx.h +++ b/include/linux/platform_data/pm33xx.h @@ -12,6 +12,29 @@ #include #include +/* + * WFI Flags for sleep code control + * + * These flags allow PM code to exclude certain operations from happening + * in the low level ASM code found in sleep33xx.S and sleep43xx.S + * + * WFI_FLAG_FLUSH_CACHE: Flush the ARM caches and disable caching. Only + * needed when MPU will lose context. + * WFI_FLAG_SELF_REFRESH: Let EMIF place DDR memory into self-refresh and + * disable EMIF. + * WFI_FLAG_SAVE_EMIF: Save context of all EMIF registers and restore in + * resume path. Only needed if PER domain loses context + * and must also have WFI_FLAG_SELF_REFRESH set. + * WFI_FLAG_WAKE_M3: Disable MPU clock or clockdomain to cause wkup_m3 to + * execute when WFI instruction executes. + * WFI_FLAG_RTC_ONLY: Configure the RTC to enter RTC+DDR mode. + */ +#define WFI_FLAG_FLUSH_CACHE BIT(0) +#define WFI_FLAG_SELF_REFRESH BIT(1) +#define WFI_FLAG_SAVE_EMIF BIT(2) +#define WFI_FLAG_WAKE_M3 BIT(3) +#define WFI_FLAG_RTC_ONLY BIT(4) + #ifndef __ASSEMBLER__ struct am33xx_pm_sram_addr { void (*do_wfi)(void); @@ -19,12 +42,15 @@ struct am33xx_pm_sram_addr { unsigned long *resume_offset; unsigned long *emif_sram_table; unsigned long *ro_sram_data; + unsigned long resume_address; }; struct am33xx_pm_platform_data { int (*init)(void); - int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long)); + int (*soc_suspend)(unsigned int state, int (*fn)(unsigned long), + unsigned long args); struct am33xx_pm_sram_addr *(*get_sram_addrs)(void); + void __iomem *(*get_rtc_base_addr)(void); }; struct am33xx_pm_sram_data { @@ -36,6 +62,7 @@ struct am33xx_pm_sram_data { struct am33xx_pm_ro_sram_data { u32 amx3_pm_sram_data_virt; u32 amx3_pm_sram_data_phys; + void __iomem *rtc_base_virt; } __packed __aligned(8); #endif /* __ASSEMBLER__ */ diff --git a/include/linux/soc/renesas/rcar-sysc.h b/include/linux/soc/renesas/rcar-sysc.h index 8a6086d2e9c3..00fae6fd234d 100644 --- a/include/linux/soc/renesas/rcar-sysc.h +++ b/include/linux/soc/renesas/rcar-sysc.h @@ -2,16 +2,7 @@ #ifndef __LINUX_SOC_RENESAS_RCAR_SYSC_H__ #define __LINUX_SOC_RENESAS_RCAR_SYSC_H__ -#include - -struct rcar_sysc_ch { - u16 chan_offs; - u8 chan_bit; - u8 isr_bit; -}; - -int rcar_sysc_power_down(const struct rcar_sysc_ch *sysc_ch); -int rcar_sysc_power_up(const struct rcar_sysc_ch *sysc_ch); -void rcar_sysc_init(phys_addr_t base, u32 syscier); +int rcar_sysc_power_down_cpu(unsigned int cpu); +int rcar_sysc_power_up_cpu(unsigned int cpu); #endif /* __LINUX_SOC_RENESAS_RCAR_SYSC_H__ */