microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge master.kernel.org:/home/rmk/linux-2.6-arm

This commit is contained in:
Linus Torvalds 2005-11-08 15:15:31 -08:00
Родитель 329f7dba5f 72274c9e24
Коммит 9f04012c58
24 изменённых файлов: 629 добавлений и 173 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

10
arch/arm/Kconfig
Просмотреть файл

@ -356,6 +356,16 @@ config HOTPLUG_CPU
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && n
default y
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
config PREEMPT
bool "Preemptible Kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL

6
arch/arm/boot/compressed/misc.c
Просмотреть файл

@ -283,8 +283,14 @@ void flush_window(void)
putstr(".");
}
#ifndef arch_error
#define arch_error(x)
#endif
static void error(char *x)
{
arch_error(x);
putstr("\n\n");
putstr(x);
putstr("\n\n -- System halted");

6
arch/arm/common/scoop.c
Просмотреть файл

@ -19,12 +19,6 @@
#define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c
There is no easy way to link multiple scoop devices into one
single entity for the pxa2xx_pcmcia device */
int scoop_num;
struct scoop_pcmcia_dev *scoop_devs;
struct scoop_dev {
void *base;
spinlock_t scoop_lock;

4
arch/arm/kernel/armksyms.c
Просмотреть файл

@ -9,6 +9,7 @@
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/cryptohash.h>
#include <linux/delay.h>
#include <linux/in6.h>
#include <linux/syscalls.h>
@ -126,6 +127,9 @@ EXPORT_SYMBOL(__put_user_2);
EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
/* crypto hash */
EXPORT_SYMBOL(sha_transform);
/* gcc lib functions */
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__ashrdi3);

7
arch/arm/kernel/entry-armv.S
Просмотреть файл

@ -47,6 +47,13 @@
movne r0, sp
adrne lr, 1b
bne do_IPI
#ifdef CONFIG_LOCAL_TIMERS
test_for_ltirq r0, r6, r5, lr
movne r0, sp
adrne lr, 1b
bne do_local_timer
#endif
#endif
.endm

3
arch/arm/kernel/irq.c
Просмотреть файл

@ -264,6 +264,7 @@ unlock:
#endif
#ifdef CONFIG_SMP
show_ipi_list(p);
show_local_irqs(p);
#endif
seq_printf(p, "Err: %10lu\n", irq_err_count);
}
@ -995,7 +996,7 @@ void __init init_irq_proc(void)
struct proc_dir_entry *dir;
int irq;
dir = proc_mkdir("irq", 0);
dir = proc_mkdir("irq", NULL);
if (!dir)
return;

42
arch/arm/kernel/smp.c
Просмотреть файл

@ -142,7 +142,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
ret = -EIO;
}
secondary_data.stack = 0;
secondary_data.stack = NULL;
secondary_data.pgdir = 0;
*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
@ -184,6 +184,11 @@ int __cpuexit __cpu_disable(void)
*/
migrate_irqs();
/*
* Stop the local timer for this CPU.
*/
local_timer_stop(cpu);
/*
* Flush user cache and TLB mappings, and then remove this CPU
* from the vm mask set of all processes.
@ -289,6 +294,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
*/
cpu_set(cpu, cpu_online_map);
/*
* Setup local timer for this CPU.
*/
local_timer_setup(cpu);
/*
* OK, it's off to the idle thread for us
*/
@ -359,8 +369,8 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
* You must not call this function with disabled interrupts, from a
* hardware interrupt handler, nor from a bottom half handler.
*/
int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry,
int wait, cpumask_t callmap)
static int smp_call_function_on_cpu(void (*func)(void *info), void *info,
int retry, int wait, cpumask_t callmap)
{
struct smp_call_struct data;
unsigned long timeout;
@ -454,6 +464,18 @@ void show_ipi_list(struct seq_file *p)
seq_putc(p, '\n');
}
void show_local_irqs(struct seq_file *p)
{
unsigned int cpu;
seq_printf(p, "LOC: ");
for_each_present_cpu(cpu)
seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs);
seq_putc(p, '\n');
}
static void ipi_timer(struct pt_regs *regs)
{
int user = user_mode(regs);
@ -464,6 +486,18 @@ static void ipi_timer(struct pt_regs *regs)
irq_exit();
}
#ifdef CONFIG_LOCAL_TIMERS
asmlinkage void do_local_timer(struct pt_regs *regs)
{
int cpu = smp_processor_id();
if (local_timer_ack()) {
irq_stat[cpu].local_timer_irqs++;
ipi_timer(regs);
}
}
#endif
/*
* ipi_call_function - handle IPI from smp_call_function()
*
@ -515,7 +549,7 @@ static void ipi_cpu_stop(unsigned int cpu)
*
* Bit 0 - Inter-processor function call
*/
void do_IPI(struct pt_regs *regs)
asmlinkage void do_IPI(struct pt_regs *regs)
{
unsigned int cpu = smp_processor_id();
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);

50
arch/arm/mach-pxa/corgi.c
Просмотреть файл

@ -62,15 +62,6 @@ static struct scoop_config corgi_scoop_setup = {
.io_out = CORGI_SCOOP_IO_OUT,
};
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
.irq = CORGI_IRQ_GPIO_CF_IRQ,
.cd_irq = CORGI_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},
};
struct platform_device corgiscoop_device = {
.name = "sharp-scoop",
.id = -1,
@ -81,6 +72,44 @@ struct platform_device corgiscoop_device = {
.resource = corgi_scoop_resources,
};
static void corgi_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
.irq = CORGI_IRQ_GPIO_CF_IRQ,
.cd_irq = CORGI_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},
};
static struct scoop_pcmcia_config corgi_pcmcia_config = {
.devs = &corgi_pcmcia_scoop[0],
.num_devs = 1,
.pcmcia_init = corgi_pcmcia_init,
};
EXPORT_SYMBOL(corgiscoop_device);
/*
* Corgi SSP Device
@ -294,8 +323,7 @@ static void __init corgi_init(void)
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
scoop_num = 1;
scoop_devs = &corgi_pcmcia_scoop[0];
platform_scoop_config = &corgi_pcmcia_config;
platform_add_devices(devices, ARRAY_SIZE(devices));
}

32
arch/arm/mach-pxa/poodle.c
Просмотреть файл

@ -65,6 +65,27 @@ struct platform_device poodle_scoop_device = {
.resource = poodle_scoop_resources,
};
static void poodle_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}
static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
{
.dev = &poodle_scoop_device.dev,
@ -74,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
},
};
static struct scoop_pcmcia_config poodle_pcmcia_config = {
.devs = &poodle_pcmcia_scoop[0],
.num_devs = 1,
.pcmcia_init = poodle_pcmcia_init,
};
EXPORT_SYMBOL(poodle_scoop_device);
/* LoCoMo device */
static struct resource locomo_resources[] = {
@ -268,8 +297,7 @@ static void __init poodle_init(void)
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
scoop_num = 1;
scoop_devs = &poodle_pcmcia_scoop[0];
platform_scoop_config = &poodle_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {

95
arch/arm/mach-pxa/spitz.c
Просмотреть файл

@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = {
.resource = spitz_scoop2_resources,
};
#define SPITZ_PWR_SD 0x01
#define SPITZ_PWR_CF 0x02
/* Power control is shared with between one of the CF slots and SD */
static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
{
unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
if (new_cpr & 0x0007) {
set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
if (!(cpr & 0x0002) && !(cpr & 0x0004))
mdelay(5);
if (device == SPITZ_PWR_CF)
cpr |= 0x0002;
if (device == SPITZ_PWR_SD)
cpr |= 0x0004;
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
} else {
if (device == SPITZ_PWR_CF)
cpr &= ~0x0002;
if (device == SPITZ_PWR_SD)
cpr &= ~0x0004;
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
mdelay(1);
reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
}
}
}
static void spitz_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO85_nPCE_1_MD);
pxa_gpio_mode(GPIO54_nPCE_2_MD);
pxa_gpio_mode(GPIO104_pSKTSEL_MD);
}
static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
{
/* Only need to override behaviour for slot 0 */
if (nr == 0)
spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
else
write_scoop_reg(scoop, SCOOP_CPR, cpr);
}
static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
{
.dev = &spitzscoop_device.dev,
@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
},
};
static struct scoop_pcmcia_config spitz_pcmcia_config = {
.devs = &spitz_pcmcia_scoop[0],
.num_devs = 2,
.pcmcia_init = spitz_pcmcia_init,
.power_ctrl = spitz_pcmcia_pwr,
};
EXPORT_SYMBOL(spitzscoop_device);
EXPORT_SYMBOL(spitzscoop2_device);
/*
* Spitz SSP Device
@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in
return 0;
}
/* Power control is shared with one of the CF slots so we have a mess */
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
if (( 1 << vdd) & p_d->ocr_mask) {
/* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */
set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
mdelay(2);
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04);
} else {
/* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04);
if (!(cpr | 0x02)) {
mdelay(1);
reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
}
}
if (( 1 << vdd) & p_d->ocr_mask)
spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
else
spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
}
static int spitz_mci_get_ro(struct device *dev)
@ -351,8 +408,8 @@ static void __init common_init(void)
static void __init spitz_init(void)
{
scoop_num = 2;
scoop_devs = &spitz_pcmcia_scoop[0];
platform_scoop_config = &spitz_pcmcia_config;
spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
common_init();

8
arch/arm/mach-pxa/time.c
Просмотреть файл

@ -132,11 +132,13 @@ static void __init pxa_timer_init(void)
tv.tv_sec = pxa_get_rtc_time();
do_settimeofday(&tv);
OSMR0 = 0; /* set initial match at 0 */
OIER = 0; /* disable any timer interrupts */
OSCR = LATCH*2; /* push OSCR out of the way */
OSMR0 = LATCH; /* set initial match */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &pxa_timer_irq);
OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer, force first match */
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer */
}
#ifdef CONFIG_NO_IDLE_HZ

152
arch/arm/mach-pxa/tosa.c
Просмотреть файл

@ -98,6 +98,9 @@ struct platform_device tosascoop_jc_device = {
.resource = tosa_scoop_jc_resources,
};
/*
* PCMCIA
*/
static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
{
.dev = &tosascoop_device.dev,
@ -111,16 +114,155 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
},
};
static void tosa_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}
static struct scoop_pcmcia_config tosa_pcmcia_config = {
.devs = &tosa_pcmcia_scoop[0],
.num_devs = 2,
.pcmcia_init = tosa_pcmcia_init,
};
/*
* USB Device Controller
*/
static void tosa_udc_command(int cmd)
{
switch(cmd) {
case PXA2XX_UDC_CMD_CONNECT:
set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
break;
case PXA2XX_UDC_CMD_DISCONNECT:
reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
break;
}
}
static int tosa_udc_is_connected(void)
{
return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0);
}
static struct pxa2xx_udc_mach_info udc_info __initdata = {
.udc_command = tosa_udc_command,
.udc_is_connected = tosa_udc_is_connected,
};
/*
* MMC/SD Device
*/
static struct pxamci_platform_data tosa_mci_platform_data;
static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data)
{
int err;
/* setup GPIO for PXA25x MMC controller */
pxa_gpio_mode(GPIO6_MMCCLK_MD);
pxa_gpio_mode(GPIO8_MMCCS0_MD);
pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT,
"MMC/SD card detect", data);
if (err) {
printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
return 0;
}
static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask) {
set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
} else {
reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
}
}
static int tosa_mci_get_ro(struct device *dev)
{
return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
}
static void tosa_mci_exit(struct device *dev, void *data)
{
free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
}
static struct pxamci_platform_data tosa_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = tosa_mci_init,
.get_ro = tosa_mci_get_ro,
.setpower = tosa_mci_setpower,
.exit = tosa_mci_exit,
};
/*
* Irda
*/
static void tosa_irda_transceiver_mode(struct device *dev, int mode)
{
if (mode & IR_OFF) {
reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
} else {
pxa_gpio_mode(GPIO47_STTXD_MD);
set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
}
}
static struct pxaficp_platform_data tosa_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_OFF,
.transceiver_mode = tosa_irda_transceiver_mode,
};
/*
* Tosa Keyboard
*/
static struct platform_device tosakbd_device = {
.name = "tosa-keyboard",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
&tosakbd_device,
};
static void __init tosa_init(void)
{
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
/* setup sleep mode values */
PWER = 0x00000002;
@ -131,13 +273,15 @@ static void __init tosa_init(void)
PGSR2 = 0x00014000;
PCFR |= PCFR_OPDE;
// enable batt_fault
/* enable batt_fault */
PMCR = 0x01;
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
platform_scoop_config = &tosa_pcmcia_config;
scoop_num = 2;
scoop_devs = &tosa_pcmcia_scoop[0];
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init fixup_tosa(struct machine_desc *desc,

5
arch/arm/mach-realview/core.c
Просмотреть файл

@ -550,6 +550,11 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_reg
timer_tick(regs);
#ifdef CONFIG_SMP
smp_send_timer();
update_process_times(user_mode(regs));
#endif
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;

10
arch/arm/mach-realview/platsmp.c
Просмотреть файл

@ -32,7 +32,7 @@ static unsigned int __init get_core_count(void)
{
unsigned int ncores;
ncores = __raw_readl(IO_ADDRESS(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
return (ncores & 0x03) + 1;
}
@ -133,12 +133,12 @@ static void __init poke_milo(void)
#if 1
#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
__raw_writel(virt_to_phys(realview_secondary_startup),
(IO_ADDRESS(REALVIEW_SYS_BASE) +
REALVIEW_SYS_FLAGSS_OFFSET));
__io_address(REALVIEW_SYS_BASE) +
REALVIEW_SYS_FLAGSS_OFFSET);
#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
__raw_writel(3,
(IO_ADDRESS(REALVIEW_SYS_BASE) +
REALVIEW_SYS_FLAGSC_OFFSET));
__io_address(REALVIEW_SYS_BASE) +
REALVIEW_SYS_FLAGSC_OFFSET);
#endif
mb();

8
arch/arm/mach-s3c2410/Kconfig
Просмотреть файл

@ -121,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG
system resets depends on the value of PCLK. The timeout on an
200MHz s3c2410 should be about 30 seconds.
config S3C2410_BOOT_ERROR_RESET
bool "S3C2410 Reboot on decompression error"
depends on ARCH_S3C2410
help
Say y here to use the watchdog to reset the system if the
kernel decompressor detects an error during decompression.
comment "S3C2410 Setup"
config S3C2410_DMA

73
arch/arm/mach-s3c2410/mach-bast.c
Просмотреть файл

@ -89,32 +89,63 @@
/* macros to modify the physical addresses for io space */
#define PA_CS2(item) ((item) + S3C2410_CS2)
#define PA_CS3(item) ((item) + S3C2410_CS3)
#define PA_CS4(item) ((item) + S3C2410_CS4)
#define PA_CS5(item) ((item) + S3C2410_CS5)
#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
static struct map_desc bast_iodesc[] __initdata = {
/* ISA IO areas */
{ (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
/* we could possibly compress the next set down into a set of smaller tables
* pagetables, but that would mean using an L2 section, and it still means
* we cannot actually feed the same register to an LDR due to 16K spacing
*/
{
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = PA_CS2(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = PA_CS3(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
},
/* bast CPLD control registers, and external interrupt controls */
{ (u32)BAST_VA_CTRL1, BAST_PA_CTRL1, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_CTRL2, BAST_PA_CTRL2, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_CTRL3, BAST_PA_CTRL3, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_CTRL4, BAST_PA_CTRL4, SZ_1M, MT_DEVICE },
{
.virtual = (u32)BAST_VA_CTRL1,
.pfn = __phys_to_pfn(BAST_PA_CTRL1),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL2,
.pfn = __phys_to_pfn(BAST_PA_CTRL2),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL3,
.pfn = __phys_to_pfn(BAST_PA_CTRL3),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_CTRL4,
.pfn = __phys_to_pfn(BAST_PA_CTRL4),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* PC104 IRQ mux */
{ (u32)BAST_VA_PC104_IRQREQ, BAST_PA_PC104_IRQREQ, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_PC104_IRQRAW, BAST_PA_PC104_IRQRAW, SZ_1M, MT_DEVICE },
{ (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK, SZ_1M, MT_DEVICE },
{
.virtual = (u32)BAST_VA_PC104_IRQREQ,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_PC104_IRQRAW,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)BAST_VA_PC104_IRQMASK,
.pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* peripheral space... one for each of fast/slow/byte/16bit */
/* note, ide is only decoded in word space, even though some registers

54
arch/arm/mach-s3c2410/mach-vr1000.c
Просмотреть файл

@ -74,27 +74,47 @@
/* macros to modify the physical addresses for io space */
#define PA_CS2(item) ((item) + S3C2410_CS2)
#define PA_CS3(item) ((item) + S3C2410_CS3)
#define PA_CS4(item) ((item) + S3C2410_CS4)
#define PA_CS5(item) ((item) + S3C2410_CS5)
#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
static struct map_desc vr1000_iodesc[] __initdata = {
/* ISA IO areas */
{
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = PA_CS2(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = PA_CS3(BAST_PA_ISAIO),
.length = SZ_16M,
.type = MT_DEVICE,
},
{ (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
{ (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
/* we could possibly compress the next set down into a set of smaller tables
* pagetables, but that would mean using an L2 section, and it still means
* we cannot actually feed the same register to an LDR due to 16K spacing
*/
/* bast CPLD control registers, and external interrupt controls */
{ (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1, SZ_1M, MT_DEVICE },
{ (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2, SZ_1M, MT_DEVICE },
{ (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3, SZ_1M, MT_DEVICE },
{ (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4, SZ_1M, MT_DEVICE },
/* CPLD control registers, and external interrupt controls */
{
.virtual = (u32)VR1000_VA_CTRL1,
.pfn = __phys_to_pfn(VR1000_PA_CTRL1),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)VR1000_VA_CTRL2,
.pfn = __phys_to_pfn(VR1000_PA_CTRL2),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)VR1000_VA_CTRL3,
.pfn = __phys_to_pfn(VR1000_PA_CTRL3),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
.virtual = (u32)VR1000_VA_CTRL4,
.pfn = __phys_to_pfn(VR1000_PA_CTRL4),
.length = SZ_1M,
.type = MT_DEVICE,
},
/* peripheral space... one for each of fast/slow/byte/16bit */
/* note, ide is only decoded in word space, even though some registers

8
arch/arm/mach-sa1100/time.c
Просмотреть файл

@ -124,11 +124,13 @@ static void __init sa1100_timer_init(void)
tv.tv_sec = sa1100_get_rtc_time();
do_settimeofday(&tv);
OSMR0 = 0; /* set initial match at 0 */
OIER = 0; /* disable any timer interrupts */
OSCR = LATCH*2; /* push OSCR out of the way */
OSMR0 = LATCH; /* set initial match */
OSSR = 0xf; /* clear status on all timers */
setup_irq(IRQ_OST0, &sa1100_timer_irq);
OIER |= OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer, force first match */
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
OSCR = 0; /* initialize free-running timer */
}
#ifdef CONFIG_NO_IDLE_HZ

140
drivers/pcmcia/pxa2xx_sharpsl.c
Просмотреть файл

@ -22,16 +22,20 @@
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/hardware/scoop.h>
#ifdef CONFIG_SA1100_COLLIE
#include <asm/arch-sa1100/collie.h>
#else
#include <asm/arch-pxa/pxa-regs.h>
#endif
#include "soc_common.h"
#define NO_KEEP_VS 0x0001
/* PCMCIA to Scoop linkage
There is no easy way to link multiple scoop devices into one
single entity for the pxa2xx_pcmcia device so this structure
is used which is setup by the platform code
*/
struct scoop_pcmcia_config *platform_scoop_config;
#define SCOOP_DEV platform_scoop_config->devs
static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev)
{
reset_scoop(scoopdev->dev);
@ -43,38 +47,16 @@ static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int ret;
#ifndef CONFIG_SA1100_COLLIE
/*
* Setup default state of GPIO outputs
* before we enable them as outputs.
*/
GPSR(GPIO48_nPOE) =
GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) |
GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) |
GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
#endif
if (platform_scoop_config->pcmcia_init)
platform_scoop_config->pcmcia_init();
/* Register interrupts */
if (scoop_devs[skt->nr].cd_irq >= 0) {
if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
struct pcmcia_irqs cd_irq;
cd_irq.sock = skt->nr;
cd_irq.irq = scoop_devs[skt->nr].cd_irq;
cd_irq.str = scoop_devs[skt->nr].cd_irq_str;
cd_irq.irq = SCOOP_DEV[skt->nr].cd_irq;
cd_irq.str = SCOOP_DEV[skt->nr].cd_irq_str;
ret = soc_pcmcia_request_irqs(skt, &cd_irq, 1);
if (ret) {
@ -83,19 +65,19 @@ static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
}
}
skt->irq = scoop_devs[skt->nr].irq;
skt->irq = SCOOP_DEV[skt->nr].irq;
return 0;
}
static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
if (scoop_devs[skt->nr].cd_irq >= 0) {
if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
struct pcmcia_irqs cd_irq;
cd_irq.sock = skt->nr;
cd_irq.irq = scoop_devs[skt->nr].cd_irq;
cd_irq.str = scoop_devs[skt->nr].cd_irq_str;
cd_irq.irq = SCOOP_DEV[skt->nr].cd_irq;
cd_irq.str = SCOOP_DEV[skt->nr].cd_irq_str;
soc_pcmcia_free_irqs(skt, &cd_irq, 1);
}
}
@ -105,9 +87,9 @@ static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
unsigned short cpr, csr;
struct device *scoop = scoop_devs[skt->nr].dev;
struct device *scoop = SCOOP_DEV[skt->nr].dev;
cpr = read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR);
cpr = read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR);
write_scoop_reg(scoop, SCOOP_IRM, 0x00FF);
write_scoop_reg(scoop, SCOOP_ISR, 0x0000);
@ -116,21 +98,25 @@ static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
if (csr & 0x0004) {
/* card eject */
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
}
else if (!(scoop_devs[skt->nr].keep_vs & NO_KEEP_VS)) {
else if (!(SCOOP_DEV[skt->nr].keep_vs & NO_KEEP_VS)) {
/* keep vs1,vs2 */
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
csr |= scoop_devs[skt->nr].keep_vs;
csr |= SCOOP_DEV[skt->nr].keep_vs;
}
else if (cpr & 0x0003) {
/* power on */
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
scoop_devs[skt->nr].keep_vs = (csr & 0x00C0);
SCOOP_DEV[skt->nr].keep_vs = (csr & 0x00C0);
}
else {
/* card detect */
write_scoop_reg(scoop, SCOOP_CDR, 0x0002);
if ((machine_is_spitz() || machine_is_borzoi()) && skt->nr == 1) {
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
} else {
write_scoop_reg(scoop, SCOOP_CDR, 0x0002);
}
}
state->detect = (csr & 0x0004) ? 0 : 1;
@ -144,7 +130,6 @@ static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
if ((cpr & 0x0080) && ((cpr & 0x8040) != 0x8040)) {
printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr);
}
}
@ -152,7 +137,7 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
unsigned long flags;
struct device *scoop = scoop_devs[skt->nr].dev;
struct device *scoop = SCOOP_DEV[skt->nr].dev;
unsigned short cpr, ncpr, ccr, nccr, mcr, nmcr, imr, nimr;
@ -177,8 +162,13 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
nccr = (ccr = read_scoop_reg(scoop, SCOOP_CCR)) & ~0x0080;
nimr = (imr = read_scoop_reg(scoop, SCOOP_IMR)) & ~0x003E;
ncpr |= (state->Vcc == 33) ? 0x0001 :
(state->Vcc == 50) ? 0x0002 : 0;
if ((machine_is_spitz() || machine_is_borzoi() || machine_is_akita()) && skt->nr == 0) {
ncpr |= (state->Vcc == 33) ? 0x0002 :
(state->Vcc == 50) ? 0x0002 : 0;
} else {
ncpr |= (state->Vcc == 33) ? 0x0001 :
(state->Vcc == 50) ? 0x0002 : 0;
}
nmcr |= (state->flags&SS_IOCARD) ? 0x0010 : 0;
ncpr |= (state->flags&SS_OUTPUT_ENA) ? 0x0080 : 0;
nccr |= (state->flags&SS_RESET)? 0x0080: 0;
@ -190,18 +180,22 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
((skt->status&SS_WRPROT) ? 0x0008 : 0);
if (!(ncpr & 0x0003)) {
scoop_devs[skt->nr].keep_rd = 0;
} else if (!scoop_devs[skt->nr].keep_rd) {
SCOOP_DEV[skt->nr].keep_rd = 0;
} else if (!SCOOP_DEV[skt->nr].keep_rd) {
if (nccr & 0x0080)
scoop_devs[skt->nr].keep_rd = 1;
SCOOP_DEV[skt->nr].keep_rd = 1;
else
nccr |= 0x0080;
}
if (mcr != nmcr)
write_scoop_reg(scoop, SCOOP_MCR, nmcr);
if (cpr != ncpr)
write_scoop_reg(scoop, SCOOP_CPR, ncpr);
if (cpr != ncpr) {
if (platform_scoop_config->power_ctrl)
platform_scoop_config->power_ctrl(scoop, ncpr , skt->nr);
else
write_scoop_reg(scoop, SCOOP_CPR, ncpr);
}
if (ccr != nccr)
write_scoop_reg(scoop, SCOOP_CCR, nccr);
if (imr != nimr)
@ -214,43 +208,43 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
/* Enable interrupt */
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_IMR, 0x00C0);
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_MCR, 0x0101);
scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_IMR, 0x00C0);
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_MCR, 0x0101);
SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
if (machine_is_collie())
/* We need to disable SS_OUTPUT_ENA here. */
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
/* CF_BUS_OFF */
sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
if (machine_is_collie())
/* We need to disable SS_OUTPUT_ENA here. */
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static struct pcmcia_low_level sharpsl_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = sharpsl_pcmcia_hw_init,
.hw_shutdown = sharpsl_pcmcia_hw_shutdown,
.socket_state = sharpsl_pcmcia_socket_state,
.configure_socket = sharpsl_pcmcia_configure_socket,
.socket_init = sharpsl_pcmcia_socket_init,
.socket_suspend = sharpsl_pcmcia_socket_suspend,
.first = 0,
.nr = 0,
.owner = THIS_MODULE,
.hw_init = sharpsl_pcmcia_hw_init,
.hw_shutdown = sharpsl_pcmcia_hw_shutdown,
.socket_state = sharpsl_pcmcia_socket_state,
.configure_socket = sharpsl_pcmcia_configure_socket,
.socket_init = sharpsl_pcmcia_socket_init,
.socket_suspend = sharpsl_pcmcia_socket_suspend,
.first = 0,
.nr = 0,
};
static struct platform_device *sharpsl_pcmcia_device;
#ifdef CONFIG_SA1100_COLLIE
#include "sa11xx_base.h"
int __init pcmcia_collie_init(struct device *dev)
{
int ret = -ENODEV;
@ -263,11 +257,13 @@ int __init pcmcia_collie_init(struct device *dev)
#else
static struct platform_device *sharpsl_pcmcia_device;
static int __init sharpsl_pcmcia_init(void)
{
int ret;
sharpsl_pcmcia_ops.nr=scoop_num;
sharpsl_pcmcia_ops.nr=platform_scoop_config->num_devs;
sharpsl_pcmcia_device = kmalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL);
if (!sharpsl_pcmcia_device)
return -ENOMEM;
@ -275,7 +271,7 @@ static int __init sharpsl_pcmcia_init(void)
memset(sharpsl_pcmcia_device, 0, sizeof(*sharpsl_pcmcia_device));
sharpsl_pcmcia_device->name = "pxa2xx-pcmcia";
sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
sharpsl_pcmcia_device->dev.parent=scoop_devs[0].dev;
sharpsl_pcmcia_device->dev.parent=platform_scoop_config->devs[0].dev;
ret = platform_device_register(sharpsl_pcmcia_device);
if (ret)

2
drivers/video/amba-clcd.c
Просмотреть файл

@ -518,7 +518,7 @@ static struct amba_driver clcd_driver = {
.id_table = clcdfb_id_table,
};
int __init amba_clcdfb_init(void)
static int __init amba_clcdfb_init(void)
{
if (fb_get_options("ambafb", NULL))
return -ENODEV;

22
include/asm-arm/arch-s3c2410/uncompress.h
Просмотреть файл

@ -116,6 +116,8 @@ putstr(const char *ptr)
}
}
#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
/* CONFIG_S3C2410_BOOT_WATCHDOG
*
* Simple boot-time watchdog setup, to reboot the system if there is
@ -126,8 +128,6 @@ putstr(const char *ptr)
#define WDOG_COUNT (0xff00)
#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
static inline void arch_decomp_wdog(void)
{
__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
@ -145,6 +145,24 @@ static void arch_decomp_wdog_start(void)
#define arch_decomp_wdog()
#endif
#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET
static void arch_decomp_error(const char *x)
{
putstr("\n\n");
putstr(x);
putstr("\n\n -- System resetting\n");
__raw_writel(0x4000, S3C2410_WTDAT);
__raw_writel(0x4000, S3C2410_WTCNT);
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
while(1);
}
#define arch_error arch_decomp_error
#endif
static void error(char *err);
static void

1
include/asm-arm/hardirq.h
Просмотреть файл

@ -8,6 +8,7 @@
typedef struct {
unsigned int __softirq_pending;
unsigned int local_timer_irqs;
} ____cacheline_aligned irq_cpustat_t;
#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */

10
include/asm-arm/hardware/scoop.h
Просмотреть файл

@ -52,8 +52,14 @@ struct scoop_pcmcia_dev {
unsigned char keep_rd;
};
extern int scoop_num;
extern struct scoop_pcmcia_dev *scoop_devs;
struct scoop_pcmcia_config {
struct scoop_pcmcia_dev *devs;
int num_devs;
void (*pcmcia_init)(void);
void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr);
};
extern struct scoop_pcmcia_config *platform_scoop_config;
void reset_scoop(struct device *dev);
unsigned short set_scoop_gpio(struct device *dev, unsigned short bit);

54
include/asm-arm/smp.h
Просмотреть файл

@ -36,6 +36,11 @@ struct seq_file;
*/
extern void show_ipi_list(struct seq_file *p);
/*
* Called from assembly code, this handles an IPI.
*/
asmlinkage void do_IPI(struct pt_regs *regs);
/*
* Move global data into per-processor storage.
*/
@ -46,12 +51,23 @@ extern void smp_store_cpu_info(unsigned int cpuid);
*/
extern void smp_cross_call(cpumask_t callmap);
/*
* Broadcast a timer interrupt to the other CPUs.
*/
extern void smp_send_timer(void);
/*
* Boot a secondary CPU, and assign it the specified idle task.
* This also gives us the initial stack to use for this CPU.
*/
extern int boot_secondary(unsigned int cpu, struct task_struct *);
/*
* Called from platform specific assembly code, this is the
* secondary CPU entry point.
*/
asmlinkage void secondary_start_kernel(void);
/*
* Perform platform specific initialisation of the specified CPU.
*/
@ -76,4 +92,42 @@ extern void platform_cpu_die(unsigned int cpu);
extern int platform_cpu_kill(unsigned int cpu);
extern void platform_cpu_enable(unsigned int cpu);
#ifdef CONFIG_LOCAL_TIMERS
/*
* Setup a local timer interrupt for a CPU.
*/
extern void local_timer_setup(unsigned int cpu);
/*
* Stop a local timer interrupt.
*/
extern void local_timer_stop(unsigned int cpu);
/*
* Platform provides this to acknowledge a local timer IRQ
*/
extern int local_timer_ack(void);
#else
static inline void local_timer_setup(unsigned int cpu)
{
}
static inline void local_timer_stop(unsigned int cpu)
{
}
#endif
/*
* show local interrupt info
*/
extern void show_local_irqs(struct seq_file *);
/*
* Called from assembly, this is the local timer IRQ handler
*/
asmlinkage void do_local_timer(struct pt_regs *);
#endif /* ifndef __ASM_ARM_SMP_H */