sh: kfr2r09 board support - LCDC panel
This patch adds support for the WQVGA LCD display used by the KFR2R09 board. The LCD module is a TX07D34VM0AAA made by Hitachi, and this module is made up by a R61517 chip together with a 240x400 pixel display. The screen is attached to the SuperH Mobile LCDC using a 18-bit SYS bus. The register settings used by the SYS panel setup code are based on an out-of-tree driver which apart from duplicating all LCDC driver code and writing to non-existing hardware registers also never was posted for upstream merge. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Magnus Damm
Paul Mundt
Родитель
ec56b66fed
Коммит
9f26e659d8
|
|
@ -1 +1,2 @@
|
|||
obj-y := setup.o
|
||||
obj-$(CONFIG_FB_SH_MOBILE_LCDC) += lcd_wqvga.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,332 @@
|
|||
/*
|
||||
* KFR2R09 LCD panel support
|
||||
*
|
||||
* Copyright (C) 2009 Magnus Damm
|
||||
*
|
||||
* Register settings based on the out-of-tree t33fb.c driver
|
||||
* Copyright (C) 2008 Lineo Solutions, Inc.
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file COPYING in the main directory of this archive for
|
||||
* more details.
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <video/sh_mobile_lcdc.h>
|
||||
#include <mach/kfr2r09.h>
|
||||
#include <cpu/sh7724.h>
|
||||
|
||||
/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
|
||||
* up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
|
||||
* communicating with the main port of the LCDC using an 18-bit SYS interface.
|
||||
*
|
||||
* The device code for this LCD module is 0x01221517.
|
||||
*/
|
||||
|
||||
static const unsigned char data_frame_if[] = {
|
||||
0x02, /* WEMODE: 1=cont, 0=one-shot */
|
||||
0x00, 0x00,
|
||||
0x00, /* EPF, DFM */
|
||||
0x02, /* RIM[1] : 1 (18bpp) */
|
||||
};
|
||||
|
||||
static const unsigned char data_panel[] = {
|
||||
0x0b,
|
||||
0x63, /* 400 lines */
|
||||
0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
|
||||
};
|
||||
|
||||
static const unsigned char data_timing[] = {
|
||||
0x00, 0x00, 0x13, 0x08, 0x08,
|
||||
};
|
||||
|
||||
static const unsigned char data_timing_src[] = {
|
||||
0x11, 0x01, 0x00, 0x01,
|
||||
};
|
||||
|
||||
static const unsigned char data_gamma[] = {
|
||||
0x01, 0x02, 0x08, 0x23, 0x03, 0x0c, 0x00, 0x06, 0x00, 0x00,
|
||||
0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
|
||||
};
|
||||
|
||||
static const unsigned char data_power[] = {
|
||||
0x07, 0xc5, 0xdc, 0x02, 0x33, 0x0a,
|
||||
};
|
||||
|
||||
static unsigned long read_reg(void *sohandle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *so)
|
||||
{
|
||||
return so->read_data(sohandle);
|
||||
}
|
||||
|
||||
static void write_reg(void *sohandle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *so,
|
||||
int i, unsigned long v)
|
||||
{
|
||||
if (i)
|
||||
so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
|
||||
else
|
||||
so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
|
||||
}
|
||||
|
||||
static void write_data(void *sohandle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *so,
|
||||
unsigned char const *data, int no_data)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < no_data; i++)
|
||||
write_reg(sohandle, so, 1, data[i]);
|
||||
}
|
||||
|
||||
static unsigned long read_device_code(void *sohandle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *so)
|
||||
{
|
||||
unsigned long device_code;
|
||||
|
||||
/* access protect OFF */
|
||||
write_reg(sohandle, so, 0, 0xb0);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
|
||||
/* deep standby OFF */
|
||||
write_reg(sohandle, so, 0, 0xb1);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
|
||||
/* device code command */
|
||||
write_reg(sohandle, so, 0, 0xbf);
|
||||
mdelay(50);
|
||||
|
||||
/* dummy read */
|
||||
read_reg(sohandle, so);
|
||||
|
||||
/* read device code */
|
||||
device_code = ((read_reg(sohandle, so) & 0xff) << 24);
|
||||
device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
|
||||
device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
|
||||
device_code |= (read_reg(sohandle, so) & 0xff);
|
||||
|
||||
return device_code;
|
||||
}
|
||||
|
||||
static void write_memory_start(void *sohandle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *so)
|
||||
{
|
||||
write_reg(sohandle, so, 0, 0x2c);
|
||||
}
|
||||
|
||||
static void clear_memory(void *sohandle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *so)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* write start */
|
||||
write_memory_start(sohandle, so);
|
||||
|
||||
/* paint it black */
|
||||
for (i = 0; i < (240 * 400); i++)
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
}
|
||||
|
||||
static void display_on(void *sohandle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *so)
|
||||
{
|
||||
/* access protect off */
|
||||
write_reg(sohandle, so, 0, 0xb0);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
|
||||
/* exit deep standby mode */
|
||||
write_reg(sohandle, so, 0, 0xb1);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
|
||||
/* frame memory I/F */
|
||||
write_reg(sohandle, so, 0, 0xb3);
|
||||
write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
|
||||
|
||||
/* display mode and frame memory write mode */
|
||||
write_reg(sohandle, so, 0, 0xb4);
|
||||
write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
|
||||
|
||||
/* panel */
|
||||
write_reg(sohandle, so, 0, 0xc0);
|
||||
write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
|
||||
|
||||
/* timing (normal) */
|
||||
write_reg(sohandle, so, 0, 0xc1);
|
||||
write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
|
||||
|
||||
/* timing (partial) */
|
||||
write_reg(sohandle, so, 0, 0xc2);
|
||||
write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
|
||||
|
||||
/* timing (idle) */
|
||||
write_reg(sohandle, so, 0, 0xc3);
|
||||
write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
|
||||
|
||||
/* timing (source/VCOM/gate driving) */
|
||||
write_reg(sohandle, so, 0, 0xc4);
|
||||
write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
|
||||
|
||||
/* gamma (red) */
|
||||
write_reg(sohandle, so, 0, 0xc8);
|
||||
write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
|
||||
|
||||
/* gamma (green) */
|
||||
write_reg(sohandle, so, 0, 0xc9);
|
||||
write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
|
||||
|
||||
/* gamma (blue) */
|
||||
write_reg(sohandle, so, 0, 0xca);
|
||||
write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
|
||||
|
||||
/* power (common) */
|
||||
write_reg(sohandle, so, 0, 0xd0);
|
||||
write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
|
||||
|
||||
/* VCOM */
|
||||
write_reg(sohandle, so, 0, 0xd1);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
write_reg(sohandle, so, 1, 0x0f);
|
||||
write_reg(sohandle, so, 1, 0x02);
|
||||
|
||||
/* power (normal) */
|
||||
write_reg(sohandle, so, 0, 0xd2);
|
||||
write_reg(sohandle, so, 1, 0x63);
|
||||
write_reg(sohandle, so, 1, 0x24);
|
||||
|
||||
/* power (partial) */
|
||||
write_reg(sohandle, so, 0, 0xd3);
|
||||
write_reg(sohandle, so, 1, 0x63);
|
||||
write_reg(sohandle, so, 1, 0x24);
|
||||
|
||||
/* power (idle) */
|
||||
write_reg(sohandle, so, 0, 0xd4);
|
||||
write_reg(sohandle, so, 1, 0x63);
|
||||
write_reg(sohandle, so, 1, 0x24);
|
||||
|
||||
write_reg(sohandle, so, 0, 0xd8);
|
||||
write_reg(sohandle, so, 1, 0x77);
|
||||
write_reg(sohandle, so, 1, 0x77);
|
||||
|
||||
/* TE signal */
|
||||
write_reg(sohandle, so, 0, 0x35);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
|
||||
/* TE signal line */
|
||||
write_reg(sohandle, so, 0, 0x44);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
|
||||
/* column address */
|
||||
write_reg(sohandle, so, 0, 0x2a);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
write_reg(sohandle, so, 1, 0xef);
|
||||
|
||||
/* page address */
|
||||
write_reg(sohandle, so, 0, 0x2b);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
write_reg(sohandle, so, 1, 0x00);
|
||||
write_reg(sohandle, so, 1, 0x01);
|
||||
write_reg(sohandle, so, 1, 0x8f);
|
||||
|
||||
/* exit sleep mode */
|
||||
write_reg(sohandle, so, 0, 0x11);
|
||||
|
||||
mdelay(120);
|
||||
|
||||
/* clear vram */
|
||||
clear_memory(sohandle, so);
|
||||
|
||||
/* display ON */
|
||||
write_reg(sohandle, so, 0, 0x29);
|
||||
mdelay(1);
|
||||
|
||||
write_memory_start(sohandle, so);
|
||||
}
|
||||
|
||||
int kfr2r09_lcd_setup(void *board_data, void *sohandle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *so)
|
||||
{
|
||||
/* power on */
|
||||
gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
|
||||
gpio_set_value(GPIO_PTE4, 0); /* LCD_RST/ -> L */
|
||||
gpio_set_value(GPIO_PTF4, 1); /* PROTECT/ -> H */
|
||||
udelay(1100);
|
||||
gpio_set_value(GPIO_PTE4, 1); /* LCD_RST/ -> H */
|
||||
udelay(10);
|
||||
gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */
|
||||
mdelay(20);
|
||||
|
||||
if (read_device_code(sohandle, so) != 0x01221517)
|
||||
return -ENODEV;
|
||||
|
||||
pr_info("KFR2R09 WQVGA LCD Module detected.\n");
|
||||
|
||||
display_on(sohandle, so);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define CTRL_CKSW 0x10
|
||||
#define CTRL_C10 0x20
|
||||
#define CTRL_CPSW 0x80
|
||||
#define MAIN_MLED4 0x40
|
||||
#define MAIN_MSW 0x80
|
||||
|
||||
static int kfr2r09_lcd_backlight(int on)
|
||||
{
|
||||
struct i2c_adapter *a;
|
||||
struct i2c_msg msg;
|
||||
unsigned char buf[2];
|
||||
int ret;
|
||||
|
||||
a = i2c_get_adapter(0);
|
||||
if (!a)
|
||||
return -ENODEV;
|
||||
|
||||
buf[0] = 0x00;
|
||||
if (on)
|
||||
buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
|
||||
else
|
||||
buf[1] = 0;
|
||||
|
||||
msg.addr = 0x75;
|
||||
msg.buf = buf;
|
||||
msg.len = 2;
|
||||
msg.flags = 0;
|
||||
ret = i2c_transfer(a, &msg, 1);
|
||||
if (ret != 1)
|
||||
return -ENODEV;
|
||||
|
||||
buf[0] = 0x01;
|
||||
if (on)
|
||||
buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
|
||||
else
|
||||
buf[1] = 0;
|
||||
|
||||
msg.addr = 0x75;
|
||||
msg.buf = buf;
|
||||
msg.len = 2;
|
||||
msg.flags = 0;
|
||||
ret = i2c_transfer(a, &msg, 1);
|
||||
if (ret != 1)
|
||||
return -ENODEV;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void kfr2r09_lcd_on(void *board_data)
|
||||
{
|
||||
kfr2r09_lcd_backlight(1);
|
||||
}
|
||||
|
||||
void kfr2r09_lcd_off(void *board_data)
|
||||
{
|
||||
kfr2r09_lcd_backlight(0);
|
||||
}
|
||||
|
|
@ -15,11 +15,13 @@
|
|||
#include <linux/clk.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/input.h>
|
||||
#include <video/sh_mobile_lcdc.h>
|
||||
#include <asm/clock.h>
|
||||
#include <asm/machvec.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/sh_keysc.h>
|
||||
#include <cpu/sh7724.h>
|
||||
#include <mach/kfr2r09.h>
|
||||
|
||||
static struct mtd_partition kfr2r09_nor_flash_partitions[] =
|
||||
{
|
||||
|
|
@ -97,9 +99,70 @@ static struct platform_device kfr2r09_sh_keysc_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
|
||||
.clock_source = LCDC_CLK_BUS,
|
||||
.ch[0] = {
|
||||
.chan = LCDC_CHAN_MAINLCD,
|
||||
.bpp = 16,
|
||||
.interface_type = SYS18,
|
||||
.clock_divider = 6,
|
||||
.flags = LCDC_FLAGS_DWPOL,
|
||||
.lcd_cfg = {
|
||||
.name = "TX07D34VM0AAA",
|
||||
.xres = 240,
|
||||
.yres = 400,
|
||||
.left_margin = 0,
|
||||
.right_margin = 16,
|
||||
.hsync_len = 8,
|
||||
.upper_margin = 0,
|
||||
.lower_margin = 1,
|
||||
.vsync_len = 1,
|
||||
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
||||
},
|
||||
.lcd_size_cfg = {
|
||||
.width = 35,
|
||||
.height = 58,
|
||||
},
|
||||
.board_cfg = {
|
||||
.setup_sys = kfr2r09_lcd_setup,
|
||||
.display_on = kfr2r09_lcd_on,
|
||||
.display_off = kfr2r09_lcd_off,
|
||||
},
|
||||
.sys_bus_cfg = {
|
||||
.ldmt2r = 0x07010904,
|
||||
.ldmt3r = 0x14012914,
|
||||
/* set 1s delay to encourage fsync() */
|
||||
.deferred_io_msec = 1000,
|
||||
},
|
||||
}
|
||||
};
|
||||
|
||||
static struct resource kfr2r09_sh_lcdc_resources[] = {
|
||||
[0] = {
|
||||
.name = "LCDC",
|
||||
.start = 0xfe940000, /* P4-only space */
|
||||
.end = 0xfe941fff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = 106,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device kfr2r09_sh_lcdc_device = {
|
||||
.name = "sh_mobile_lcdc_fb",
|
||||
.num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
|
||||
.resource = kfr2r09_sh_lcdc_resources,
|
||||
.dev = {
|
||||
.platform_data = &kfr2r09_sh_lcdc_info,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device *kfr2r09_devices[] __initdata = {
|
||||
&kfr2r09_nor_flash_device,
|
||||
&kfr2r09_sh_keysc_device,
|
||||
&kfr2r09_sh_lcdc_device,
|
||||
};
|
||||
|
||||
#define BSC_CS0BCR 0xfec10004
|
||||
|
|
@ -128,6 +191,37 @@ static int __init kfr2r09_devices_setup(void)
|
|||
gpio_request(GPIO_FN_KEYIN4, NULL);
|
||||
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
|
||||
|
||||
/* setup LCDC pins for SYS panel */
|
||||
gpio_request(GPIO_FN_LCDD17, NULL);
|
||||
gpio_request(GPIO_FN_LCDD16, NULL);
|
||||
gpio_request(GPIO_FN_LCDD15, NULL);
|
||||
gpio_request(GPIO_FN_LCDD14, NULL);
|
||||
gpio_request(GPIO_FN_LCDD13, NULL);
|
||||
gpio_request(GPIO_FN_LCDD12, NULL);
|
||||
gpio_request(GPIO_FN_LCDD11, NULL);
|
||||
gpio_request(GPIO_FN_LCDD10, NULL);
|
||||
gpio_request(GPIO_FN_LCDD9, NULL);
|
||||
gpio_request(GPIO_FN_LCDD8, NULL);
|
||||
gpio_request(GPIO_FN_LCDD7, NULL);
|
||||
gpio_request(GPIO_FN_LCDD6, NULL);
|
||||
gpio_request(GPIO_FN_LCDD5, NULL);
|
||||
gpio_request(GPIO_FN_LCDD4, NULL);
|
||||
gpio_request(GPIO_FN_LCDD3, NULL);
|
||||
gpio_request(GPIO_FN_LCDD2, NULL);
|
||||
gpio_request(GPIO_FN_LCDD1, NULL);
|
||||
gpio_request(GPIO_FN_LCDD0, NULL);
|
||||
gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
|
||||
gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
|
||||
gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
|
||||
gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
|
||||
gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
|
||||
gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
|
||||
gpio_direction_output(GPIO_PTE4, 1);
|
||||
gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
|
||||
gpio_direction_output(GPIO_PTF4, 1);
|
||||
gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
|
||||
gpio_direction_output(GPIO_PTU0, 1);
|
||||
|
||||
return platform_add_devices(kfr2r09_devices,
|
||||
ARRAY_SIZE(kfr2r09_devices));
|
||||
}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,21 @@
|
|||
#ifndef __ASM_SH_KFR2R09_H
|
||||
#define __ASM_SH_KFR2R09_H
|
||||
|
||||
#include <video/sh_mobile_lcdc.h>
|
||||
|
||||
#ifdef CONFIG_FB_SH_MOBILE_LCDC
|
||||
void kfr2r09_lcd_on(void *board_data);
|
||||
void kfr2r09_lcd_off(void *board_data);
|
||||
int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
|
||||
#else
|
||||
static inline void kfr2r09_lcd_on(void *board_data) {}
|
||||
static inline void kfr2r09_lcd_off(void *board_data) {}
|
||||
static inline int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
|
||||
struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
|
||||
{
|
||||
return -ENODEV;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASM_SH_KFR2R09_H */
|
||||
Загрузка…
Ссылка в новой задаче