[ARM] pxa: cpufreq-pxa2xx: sdram_rows detection support

This patch implements Eric Miao's idea to detect the correct value of
sdram_rows by inspecting the MDCNFG register settings.
It is only tested on two pxa27x devices with 64MB RAM (magician and
hx4700) so far.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
This commit is contained in:
Philipp Zabel 2008-06-29 16:53:34 +02:00 коммит произвёл Eric Miao
Родитель 65587f7d15
Коммит a10c287d39
2 изменённых файлов: 27 добавлений и 3 удалений

Просмотреть файл

@ -64,7 +64,7 @@ typedef struct {
/* Define the refresh period in mSec for the SDRAM and the number of rows */
#define SDRAM_TREF 64 /* standard 64ms SDRAM */
#define SDRAM_ROWS 4096 /* 64MB=8192 32MB=4096 */
static unsigned int sdram_rows;
#define CCLKCFG_TURBO 0x1
#define CCLKCFG_FCS 0x2
@ -73,6 +73,9 @@ typedef struct {
#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2)
#define MDREFR_DRI_MASK 0xFFF
#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
/*
* PXA255 definitions
*/
@ -192,14 +195,28 @@ static void pxa27x_guess_max_freq(void)
}
}
static void init_sdram_rows(void)
{
uint32_t mdcnfg = MDCNFG;
unsigned int drac2 = 0, drac0 = 0;
if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
drac2 = MDCNFG_DRAC2(mdcnfg);
if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
drac0 = MDCNFG_DRAC0(mdcnfg);
sdram_rows = 1 << (11 + max(drac0, drac2));
}
static u32 mdrefr_dri(unsigned int freq)
{
u32 dri = 0;
if (cpu_is_pxa25x())
dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS * 32));
dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
if (cpu_is_pxa27x())
dri = ((freq * SDRAM_TREF) / (SDRAM_ROWS - 31)) / 32;
dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
return dri;
}
@ -334,6 +351,8 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
if (cpu_is_pxa27x())
pxa27x_guess_max_freq();
init_sdram_rows();
/* set default policy and cpuinfo */
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
policy->cur = get_clk_frequency_khz(0); /* current freq */

Просмотреть файл

@ -49,6 +49,11 @@
#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */