net: Move MII out from under NET_CORE and hide it

All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-18 03:24:51 +01:00 · 2013-06-18 03:24:51 +01:00 · a1606c7dc6
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@ -4,7 +4,6 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
 	select ETHERNET
-	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@ -4,7 +4,6 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V32
 	select ETHERNET
-	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX FS built-in 10/100Mbit Ethernet
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@ -25,6 +25,9 @@ menuconfig NETDEVICES
 # that for each of the symbols.
 if NETDEVICES

+config MII
+	tristate
+
 config NET_CORE
 	default y
 	bool "Network core driver support"
@ -100,13 +103,6 @@ config NET_FC
 	  adaptor below. You also should have said Y to "SCSI support" and
 	  "SCSI generic support".

-config MII
-	tristate "Generic Media Independent Interface device support"
-	help
-	  Most ethernet controllers have MII transceiver either as an external
-	  or internal device.  It is safe to say Y or M here even if your
-	  ethernet card lacks MII.
-
 config IFB
 	tristate "Intermediate Functional Block support"
 	depends on NET_CLS_ACT
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@ -67,7 +67,6 @@ config PCMCIA_3C589
 config VORTEX
 	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
 	depends on (PCI || EISA) && HAS_IOPORT
-	select NET_CORE
 	select MII
 	---help---
 	  This option enables driver support for a large number of 10Mbps and
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@ -64,7 +64,6 @@ config JME
 	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the PCI-Express gigabit ethernet adapters
@ -96,7 +95,6 @@ config FEALNX
 	tristate "Myson MTD-8xx PCI Ethernet support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
@ -107,7 +105,6 @@ source "drivers/net/ethernet/8390/Kconfig"

 config NET_NETX
 	tristate "NetX Ethernet support"
-	select NET_CORE
 	select MII
 	depends on ARCH_NETX
 	---help---
@ -125,7 +122,6 @@ source "drivers/net/ethernet/oki-semi/Kconfig"
 config ETHOC
 	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
 	depends on HAS_IOMEM && HAS_DMA
-	select NET_CORE
 	select MII
 	select PHYLIB
 	select CRC32
--- a/drivers/net/ethernet/adaptec/Kconfig
+++ b/drivers/net/ethernet/adaptec/Kconfig
@ -22,7 +22,6 @@ config ADAPTEC_STARFIRE
 	tristate "Adaptec Starfire/DuraLAN support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
--- a/drivers/net/ethernet/adi/Kconfig
+++ b/drivers/net/ethernet/adi/Kconfig
@ -23,7 +23,6 @@ config BFIN_MAC
 	tristate "Blackfin on-chip MAC support"
 	depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
 	select CRC32
-	select NET_CORE
 	select MII
 	select PHYLIB
 	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
--- a/drivers/net/ethernet/allwinner/Kconfig
+++ b/drivers/net/ethernet/allwinner/Kconfig
@ -24,7 +24,6 @@ config SUN4I_EMAC
 	depends on ARCH_SUNXI
 	depends on OF
 	select CRC32
-	select NET_CORE
 	select MII
 	select PHYLIB
        ---help---
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@ -34,7 +34,6 @@ config AMD8111_ETH
 	tristate "AMD 8111 (new PCI LANCE) support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  If you have an AMD 8111-based PCI LANCE ethernet card,
@ -60,7 +59,6 @@ config PCNET32
 	tristate "AMD PCnet32 PCI support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
@ -22,7 +22,6 @@ config ATL2
 	tristate "Atheros L2 Fast Ethernet support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the Atheros L2 fast ethernet adapter.
@ -34,7 +33,6 @@ config ATL1
 	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the Atheros/Attansic L1 gigabit ethernet
@ -47,7 +45,6 @@ config ATL1E
 	tristate "Atheros L1E Gigabit Ethernet support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the Atheros L1E gigabit ethernet adapter.
@ -59,7 +56,6 @@ config ATL1C
 	tristate "Atheros L1C Gigabit Ethernet support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the Atheros L1C gigabit ethernet adapter.
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@ -22,7 +22,6 @@ config B44
 	tristate "Broadcom 440x/47xx ethernet support"
 	depends on SSB_POSSIBLE && HAS_DMA
 	select SSB
-	select NET_CORE
 	select MII
 	---help---
 	  If you have a network (Ethernet) controller of this type, say Y
@ -54,7 +53,6 @@ config B44_PCI
 config BCM63XX_ENET
 	tristate "Broadcom 63xx internal mac support"
 	depends on BCM63XX
-	select NET_CORE
 	select MII
 	select PHYLIB
 	help
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@ -44,7 +44,6 @@ config CS89x0_PLATFORM
 config EP93XX_ETH
 	tristate "EP93xx Ethernet support"
 	depends on ARM && ARCH_EP93XX
-	select NET_CORE
 	select MII
 	help
 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
--- a/drivers/net/ethernet/davicom/Kconfig
+++ b/drivers/net/ethernet/davicom/Kconfig
@ -6,7 +6,6 @@ config DM9000
 	tristate "DM9000 support"
 	depends on ARM || BLACKFIN || MIPS || COLDFIRE
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  Support for DM9000 chipset.
--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@ -126,7 +126,6 @@ config WINBOND_840
 	tristate "Winbond W89c840 Ethernet support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This driver is for the Winbond W89c840 chip.  It also works with 
--- a/drivers/net/ethernet/dlink/Kconfig
+++ b/drivers/net/ethernet/dlink/Kconfig
@ -36,7 +36,6 @@ config SUNDANCE
 	tristate "Sundance Alta support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This driver is for the Sundance "Alta" chip.
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
@ -21,7 +21,6 @@ if NET_VENDOR_FARADAY
 config FTMAC100
 	tristate "Faraday FTMAC100 10/100 Ethernet support"
 	depends on ARM
-	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the FTMAC100 10/100 Ethernet controller
--- a/drivers/net/ethernet/freescale/fs_enet/Kconfig
+++ b/drivers/net/ethernet/freescale/fs_enet/Kconfig
@ -1,7 +1,6 @@
 config FS_ENET
       tristate "Freescale Ethernet Driver"
       depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x)
-       select NET_CORE
       select MII
       select PHYLIB

--- a/drivers/net/ethernet/icplus/Kconfig
+++ b/drivers/net/ethernet/icplus/Kconfig
@ -5,7 +5,6 @@
 config IP1000
 	tristate "IP1000 Gigabit Ethernet support"
 	depends on PCI
-	select NET_CORE
 	select MII
 	---help---
 	  This driver supports IP1000 gigabit Ethernet cards.
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@ -20,7 +20,6 @@ if NET_VENDOR_INTEL
 config E100
 	tristate "Intel(R) PRO/100+ support"
 	depends on PCI
-	select NET_CORE
 	select MII
 	---help---
 	  This driver supports Intel(R) PRO/100 family of adapters.
--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
@ -22,7 +22,6 @@ if NET_VENDOR_MICREL
 config ARM_KS8695_ETHER
 	tristate "KS8695 Ethernet support"
 	depends on ARM && ARCH_KS8695
-	select NET_CORE
 	select MII
 	---help---
 	  If you wish to compile a kernel for the KS8695 and want to
@ -39,7 +38,6 @@ config KS8842
 config KS8851
 	tristate "Micrel KS8851 SPI"
 	depends on SPI
-	select NET_CORE
 	select MII
 	select CRC32
 	select EEPROM_93CX6
@ -49,7 +47,6 @@ config KS8851
 config KS8851_MLL
 	tristate "Micrel KS8851 MLL"
 	depends on HAS_IOMEM
-	select NET_CORE
 	select MII
 	---help---
 	  This platform driver is for Micrel KS8851 Address/data bus
@ -58,7 +55,6 @@ config KS8851_MLL
 config KSZ884X_PCI
 	tristate "Micrel KSZ8841/2 PCI"
 	depends on PCI
-	select NET_CORE
 	select MII
 	select CRC32
 	---help---
--- a/drivers/net/ethernet/nuvoton/Kconfig
+++ b/drivers/net/ethernet/nuvoton/Kconfig
@ -22,7 +22,6 @@ config W90P910_ETH
 	tristate "Nuvoton w90p910 Ethernet support"
 	depends on ARM && ARCH_W90X900
 	select PHYLIB
-	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you want to use built-in Ethernet ports
--- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
@ -5,7 +5,6 @@
 config PCH_GBE
 	tristate "OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
 	depends on PCI
-	select NET_CORE
 	select MII
 	select PTP_1588_CLOCK_PCH
 	---help---
--- a/drivers/net/ethernet/packetengines/Kconfig
+++ b/drivers/net/ethernet/packetengines/Kconfig
@ -21,7 +21,6 @@ if NET_PACKET_ENGINE
 config HAMACHI
 	tristate "Packet Engines Hamachi GNIC-II support"
 	depends on PCI
-	select NET_CORE
 	select MII
 	---help---
 	  If you have a Gigabit Ethernet card of this type, say Y and read
--- a/drivers/net/ethernet/rdc/Kconfig
+++ b/drivers/net/ethernet/rdc/Kconfig
@ -22,7 +22,6 @@ config R6040
 	tristate "RDC R6040 Fast Ethernet Adapter support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	select PHYLIB
 	---help---
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@ -37,7 +37,6 @@ config 8139CP
 	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
@ -52,7 +51,6 @@ config 8139TOO
 	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
@ -107,7 +105,6 @@ config R8169
 	depends on PCI
 	select FW_LOADER
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
@ -5,7 +5,6 @@
 config SH_ETH
 	tristate "Renesas SuperH Ethernet support"
 	select CRC32
-	select NET_CORE
 	select MII
 	select MDIO_BITBANG
 	select PHYLIB
--- a/drivers/net/ethernet/sgi/Kconfig
+++ b/drivers/net/ethernet/sgi/Kconfig
@ -22,7 +22,6 @@ config SGI_IOC3_ETH
 	bool "SGI IOC3 Ethernet"
 	depends on PCI && SGI_IP27
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@ -22,7 +22,6 @@ config SIS900
 	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
@ -39,7 +38,6 @@ config SIS190
 	tristate "SiS190/SiS191 gigabit ethernet support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@ -37,7 +37,6 @@ config SMC9194
 config SMC91X
 	tristate "SMC 91C9x/91C1xxx support"
 	select CRC32
-	select NET_CORE
 	select MII
 	depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
 		    MN10300 || COLDFIRE || ARM64)
@ -57,7 +56,6 @@ config PCMCIA_SMC91C92
 	tristate "SMC 91Cxx PCMCIA support"
 	depends on PCMCIA
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
@ -70,7 +68,6 @@ config EPIC100
 	tristate "SMC EtherPower II"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
@ -81,7 +78,6 @@ config EPIC100
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
-	select NET_CORE
 	select MII
 	depends on (ARM || SUPERH || MN10300)
 	---help---
@ -99,7 +95,6 @@ config SMSC911X
 	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
 	depends on HAS_IOMEM
 	select CRC32
-	select NET_CORE
 	select MII
 	select PHYLIB
 	---help---
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@ -1,7 +1,6 @@
 config STMMAC_ETH
 	tristate "STMicroelectronics 10/100/1000 Ethernet driver"
 	depends on HAS_IOMEM && HAS_DMA
-	select NET_CORE
 	select MII
 	select PHYLIB
 	select CRC32
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@ -21,7 +21,6 @@ config VIA_RHINE
 	tristate "VIA Rhine support"
 	depends on PCI
 	select CRC32
-	select NET_CORE
 	select MII
 	---help---
 	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
@ -47,7 +46,6 @@ config VIA_VELOCITY
 	depends on (PCI || USE_OF)
 	select CRC32
 	select CRC_CCITT
-	select NET_CORE
 	select MII
 	---help---
 	  If you have a VIA "Velocity" based network card say Y here.
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@ -67,7 +67,6 @@ config USB_KAWETH

 config USB_PEGASUS
 	tristate "USB Pegasus/Pegasus-II based ethernet device support"
-	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you know you have Pegasus or Pegasus-II based adapter.
@ -83,7 +82,6 @@ config USB_PEGASUS

 config USB_RTL8150
 	tristate "USB RTL8150 based ethernet device support"
-	select NET_CORE
 	select MII
 	help
 	  Say Y here if you have RTL8150 based usb-ethernet adapter.
@ -95,7 +93,6 @@ config USB_RTL8150

 config USB_RTL8152
 	tristate "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
-	select NET_CORE
 	select MII
 	help
 	  This option adds support for Realtek RTL8152 based USB 2.0
@ -106,7 +103,6 @@ config USB_RTL8152

 config USB_USBNET
 	tristate "Multi-purpose USB Networking Framework"
-	select NET_CORE
 	select MII
 	---help---
 	  This driver supports several kinds of network links over USB,
--- a/drivers/staging/silicom/Kconfig
+++ b/drivers/staging/silicom/Kconfig
@ -32,7 +32,6 @@ config BPCTL
 	depends on PCI && NET
 	depends on m
 	select SBYPASS
-	select NET_CORE
 	select MII
 	---help---
 	  If you have a network (Ethernet) controller of this type, say Y