PCI/ERR: Recover from RCEC AER errors

A Root Complex Event Collector (RCEC) collects and signals AER errors that
were detected by Root Complex Integrated Endpoints (RCiEPs), but it may
also signal errors it detects itself.  This is analogous to errors detected
and signaled by a Root Port.

Update the AER service driver to claim RCECs in addition to Root Ports.
Add support for handling RCEC-detected AER errors.  This does not
include handling RCiEP-detected errors that are signaled by the RCEC.

Note that we expect these errors only from the native AER and APEI paths,
not from DPC or EDR.

[bhelgaas: split from combined RCEC/RCiEP patch, commit log]
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This commit is contained in:
Sean V Kelley 2020-12-02 11:26:29 -06:00 коммит произвёл Bjorn Helgaas
Родитель aa344bc8b7
Коммит a175102b0a
2 изменённых файлов: 56 добавлений и 21 удалений

Просмотреть файл

@ -300,7 +300,8 @@ int pci_aer_raw_clear_status(struct pci_dev *dev)
return -EIO;
port_type = pci_pcie_type(dev);
if (port_type == PCI_EXP_TYPE_ROOT_PORT) {
if (port_type == PCI_EXP_TYPE_ROOT_PORT ||
port_type == PCI_EXP_TYPE_RC_EC) {
pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, &status);
pci_write_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, status);
}
@ -595,7 +596,8 @@ static umode_t aer_stats_attrs_are_visible(struct kobject *kobj,
if ((a == &dev_attr_aer_rootport_total_err_cor.attr ||
a == &dev_attr_aer_rootport_total_err_fatal.attr ||
a == &dev_attr_aer_rootport_total_err_nonfatal.attr) &&
pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT)
((pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT) &&
(pci_pcie_type(pdev) != PCI_EXP_TYPE_RC_EC)))
return 0;
return a->mode;
@ -1206,6 +1208,7 @@ static int set_device_error_reporting(struct pci_dev *dev, void *data)
int type = pci_pcie_type(dev);
if ((type == PCI_EXP_TYPE_ROOT_PORT) ||
(type == PCI_EXP_TYPE_RC_EC) ||
(type == PCI_EXP_TYPE_UPSTREAM) ||
(type == PCI_EXP_TYPE_DOWNSTREAM)) {
if (enable)
@ -1330,6 +1333,11 @@ static int aer_probe(struct pcie_device *dev)
struct device *device = &dev->device;
struct pci_dev *port = dev->port;
/* Limit to Root Ports or Root Complex Event Collectors */
if ((pci_pcie_type(port) != PCI_EXP_TYPE_RC_EC) &&
(pci_pcie_type(port) != PCI_EXP_TYPE_ROOT_PORT))
return -ENODEV;
rpc = devm_kzalloc(device, sizeof(struct aer_rpc), GFP_KERNEL);
if (!rpc)
return -ENOMEM;
@ -1351,36 +1359,52 @@ static int aer_probe(struct pcie_device *dev)
}
/**
* aer_root_reset - reset link on Root Port
* @dev: pointer to Root Port's pci_dev data structure
* aer_root_reset - reset Root Port hierarchy or RCEC
* @dev: pointer to Root Port or RCEC
*
* Invoked by Port Bus driver when performing link reset at Root Port.
* Invoked by Port Bus driver when performing reset.
*/
static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
{
int aer = dev->aer_cap;
int type = pci_pcie_type(dev);
struct pci_dev *root;
int aer;
struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
u32 reg32;
int rc;
if (pcie_aer_is_native(dev)) {
root = dev; /* device with Root Error registers */
aer = root->aer_cap;
if ((host->native_aer || pcie_ports_native) && aer) {
/* Disable Root's interrupt in response to error messages */
pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
}
rc = pci_bus_error_reset(dev);
pci_info(dev, "Root Port link has been reset (%d)\n", rc);
if (type == PCI_EXP_TYPE_RC_EC) {
if (pcie_has_flr(dev)) {
rc = pcie_flr(dev);
pci_info(dev, "has been reset (%d)\n", rc);
} else {
pci_info(dev, "not reset (no FLR support)\n");
rc = -ENOTTY;
}
} else {
rc = pci_bus_error_reset(dev);
pci_info(dev, "Root Port link has been reset (%d)\n", rc);
}
if (pcie_aer_is_native(dev)) {
if ((host->native_aer || pcie_ports_native) && aer) {
/* Clear Root Error Status */
pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, &reg32);
pci_write_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, reg32);
pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, &reg32);
pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32);
/* Enable Root Port's interrupt in response to error messages */
pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
}
return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
@ -1388,7 +1412,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
static struct pcie_port_service_driver aerdriver = {
.name = "aer",
.port_type = PCI_EXP_TYPE_ROOT_PORT,
.port_type = PCIE_ANY_PORT,
.service = PCIE_PORT_SERVICE_AER,
.probe = aer_probe,

Просмотреть файл

@ -148,13 +148,16 @@ out:
/**
* pci_walk_bridge - walk bridges potentially AER affected
* @bridge: bridge which may be a Port
* @bridge: bridge which may be a Port or an RCEC
* @cb: callback to be called for each device found
* @userdata: arbitrary pointer to be passed to callback
*
* If the device provided is a bridge, walk the subordinate bus, including
* any bridged devices on buses under this bus. Call the provided callback
* on each device found.
*
* If the device provided has no subordinate bus, e.g., an RCEC, call the
* callback on the device itself.
*/
static void pci_walk_bridge(struct pci_dev *bridge,
int (*cb)(struct pci_dev *, void *),
@ -162,6 +165,8 @@ static void pci_walk_bridge(struct pci_dev *bridge,
{
if (bridge->subordinate)
pci_walk_bus(bridge->subordinate, cb, userdata);
else
cb(bridge, userdata);
}
pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
@ -174,11 +179,17 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
/*
* Error recovery runs on all subordinates of the bridge. If the
* bridge detected the error, it is cleared at the end.
* If the error was detected by a Root Port, Downstream Port, or
* RCEC, recovery runs on the device itself. For Ports, that also
* includes any subordinate devices.
*
* If it was detected by another device (Endpoint, etc), recovery
* runs on the device and anything else under the same Port, i.e.,
* everything under "bridge".
*/
if (type == PCI_EXP_TYPE_ROOT_PORT ||
type == PCI_EXP_TYPE_DOWNSTREAM)
type == PCI_EXP_TYPE_DOWNSTREAM ||
type == PCI_EXP_TYPE_RC_EC)
bridge = dev;
else
bridge = pci_upstream_bridge(dev);