Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices
This adds the support of enabling MT7668U Bluetooth function running on the top of btusb driver. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0e8d ProdID=7668 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This commit is contained in:
Sean Wang
Marcel Holtmann
Родитель
688d94fd0d
Коммит
a1c49c434e
|
|
@ -52,6 +52,17 @@ config BT_HCIBTUSB_BCM
|
|||
|
||||
Say Y here to compile support for Broadcom protocol.
|
||||
|
||||
config BT_HCIBTUSB_MTK
|
||||
bool "MediaTek protocol support"
|
||||
depends on BT_HCIBTUSB
|
||||
default n
|
||||
help
|
||||
The MediaTek protocol support enables firmware download
|
||||
support and chip initialization for MediaTek Bluetooth
|
||||
USB controllers.
|
||||
|
||||
Say Y here to compile support for MediaTek protocol.
|
||||
|
||||
config BT_HCIBTUSB_RTL
|
||||
bool "Realtek protocol support"
|
||||
depends on BT_HCIBTUSB
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@
|
|||
#include <linux/usb.h>
|
||||
#include <linux/usb/quirks.h>
|
||||
#include <linux/firmware.h>
|
||||
#include <linux/iopoll.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/suspend.h>
|
||||
|
|
@ -55,6 +56,7 @@ static struct usb_driver btusb_driver;
|
|||
#define BTUSB_BCM2045 0x40000
|
||||
#define BTUSB_IFNUM_2 0x80000
|
||||
#define BTUSB_CW6622 0x100000
|
||||
#define BTUSB_MEDIATEK 0x200000
|
||||
|
||||
static const struct usb_device_id btusb_table[] = {
|
||||
/* Generic Bluetooth USB device */
|
||||
|
|
@ -348,6 +350,10 @@ static const struct usb_device_id blacklist_table[] = {
|
|||
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
|
||||
.driver_info = BTUSB_REALTEK },
|
||||
|
||||
/* MediaTek Bluetooth devices */
|
||||
{ USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01),
|
||||
.driver_info = BTUSB_MEDIATEK },
|
||||
|
||||
/* Additional Realtek 8723AE Bluetooth devices */
|
||||
{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
|
||||
{ USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
|
||||
|
|
@ -428,6 +434,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
|
|||
#define BTUSB_DIAG_RUNNING 10
|
||||
#define BTUSB_OOB_WAKE_ENABLED 11
|
||||
#define BTUSB_HW_RESET_ACTIVE 12
|
||||
#define BTUSB_TX_WAIT_VND_EVT 13
|
||||
|
||||
struct btusb_data {
|
||||
struct hci_dev *hdev;
|
||||
|
|
@ -451,6 +458,7 @@ struct btusb_data {
|
|||
struct usb_anchor bulk_anchor;
|
||||
struct usb_anchor isoc_anchor;
|
||||
struct usb_anchor diag_anchor;
|
||||
struct usb_anchor ctrl_anchor;
|
||||
spinlock_t rxlock;
|
||||
|
||||
struct sk_buff *evt_skb;
|
||||
|
|
@ -1204,6 +1212,7 @@ static void btusb_stop_traffic(struct btusb_data *data)
|
|||
usb_kill_anchored_urbs(&data->bulk_anchor);
|
||||
usb_kill_anchored_urbs(&data->isoc_anchor);
|
||||
usb_kill_anchored_urbs(&data->diag_anchor);
|
||||
usb_kill_anchored_urbs(&data->ctrl_anchor);
|
||||
}
|
||||
|
||||
static int btusb_close(struct hci_dev *hdev)
|
||||
|
|
@ -2439,6 +2448,563 @@ static int btusb_shutdown_intel_new(struct hci_dev *hdev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_BT_HCIBTUSB_MTK
|
||||
|
||||
#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
|
||||
|
||||
#define HCI_WMT_MAX_EVENT_SIZE 64
|
||||
|
||||
enum {
|
||||
BTMTK_WMT_PATCH_DWNLD = 0x1,
|
||||
BTMTK_WMT_FUNC_CTRL = 0x6,
|
||||
BTMTK_WMT_RST = 0x7,
|
||||
BTMTK_WMT_SEMAPHORE = 0x17,
|
||||
};
|
||||
|
||||
enum {
|
||||
BTMTK_WMT_INVALID,
|
||||
BTMTK_WMT_PATCH_UNDONE,
|
||||
BTMTK_WMT_PATCH_DONE,
|
||||
BTMTK_WMT_ON_UNDONE,
|
||||
BTMTK_WMT_ON_DONE,
|
||||
BTMTK_WMT_ON_PROGRESS,
|
||||
};
|
||||
|
||||
struct btmtk_wmt_hdr {
|
||||
u8 dir;
|
||||
u8 op;
|
||||
__le16 dlen;
|
||||
u8 flag;
|
||||
} __packed;
|
||||
|
||||
struct btmtk_hci_wmt_cmd {
|
||||
struct btmtk_wmt_hdr hdr;
|
||||
u8 data[256];
|
||||
} __packed;
|
||||
|
||||
struct btmtk_hci_wmt_evt {
|
||||
struct hci_event_hdr hhdr;
|
||||
struct btmtk_wmt_hdr whdr;
|
||||
} __packed;
|
||||
|
||||
struct btmtk_hci_wmt_evt_funcc {
|
||||
struct btmtk_hci_wmt_evt hwhdr;
|
||||
__be16 status;
|
||||
} __packed;
|
||||
|
||||
struct btmtk_tci_sleep {
|
||||
u8 mode;
|
||||
__le16 duration;
|
||||
__le16 host_duration;
|
||||
u8 host_wakeup_pin;
|
||||
u8 time_compensation;
|
||||
} __packed;
|
||||
|
||||
struct btmtk_hci_wmt_params {
|
||||
u8 op;
|
||||
u8 flag;
|
||||
u16 dlen;
|
||||
const void *data;
|
||||
u32 *status;
|
||||
};
|
||||
|
||||
static void btusb_mtk_wmt_recv(struct urb *urb)
|
||||
{
|
||||
struct hci_dev *hdev = urb->context;
|
||||
struct btusb_data *data = hci_get_drvdata(hdev);
|
||||
struct hci_event_hdr *hdr;
|
||||
struct sk_buff *skb;
|
||||
int err;
|
||||
|
||||
if (urb->status == 0 && urb->actual_length > 0) {
|
||||
hdev->stat.byte_rx += urb->actual_length;
|
||||
|
||||
/* WMT event shouldn't be fragmented and the size should be
|
||||
* less than HCI_WMT_MAX_EVENT_SIZE.
|
||||
*/
|
||||
skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC);
|
||||
if (!skb) {
|
||||
hdev->stat.err_rx++;
|
||||
goto err_out;
|
||||
}
|
||||
|
||||
hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
|
||||
skb_put_data(skb, urb->transfer_buffer, urb->actual_length);
|
||||
|
||||
hdr = (void *)skb->data;
|
||||
/* Fix up the vendor event id with 0xff for vendor specific
|
||||
* instead of 0xe4 so that event send via monitoring socket can
|
||||
* be parsed properly.
|
||||
*/
|
||||
hdr->evt = 0xff;
|
||||
|
||||
/* When someone waits for the WMT event, the skb is being cloned
|
||||
* and being processed the events from there then.
|
||||
*/
|
||||
if (test_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags)) {
|
||||
data->evt_skb = skb_clone(skb, GFP_KERNEL);
|
||||
if (!data->evt_skb)
|
||||
goto err_out;
|
||||
}
|
||||
|
||||
err = hci_recv_frame(hdev, skb);
|
||||
if (err < 0)
|
||||
goto err_free_skb;
|
||||
|
||||
if (test_and_clear_bit(BTUSB_TX_WAIT_VND_EVT,
|
||||
&data->flags)) {
|
||||
/* Barrier to sync with other CPUs */
|
||||
smp_mb__after_atomic();
|
||||
wake_up_bit(&data->flags,
|
||||
BTUSB_TX_WAIT_VND_EVT);
|
||||
}
|
||||
err_out:
|
||||
return;
|
||||
err_free_skb:
|
||||
kfree_skb(data->evt_skb);
|
||||
data->evt_skb = NULL;
|
||||
return;
|
||||
} else if (urb->status == -ENOENT) {
|
||||
/* Avoid suspend failed when usb_kill_urb */
|
||||
return;
|
||||
}
|
||||
|
||||
usb_mark_last_busy(data->udev);
|
||||
|
||||
/* The URB complete handler is still called with urb->actual_length = 0
|
||||
* when the event is not available, so we should keep re-submitting
|
||||
* URB until WMT event returns, Also, It's necessary to wait some time
|
||||
* between the two consecutive control URBs to relax the target device
|
||||
* to generate the event. Otherwise, the WMT event cannot return from
|
||||
* the device successfully.
|
||||
*/
|
||||
udelay(100);
|
||||
|
||||
usb_anchor_urb(urb, &data->ctrl_anchor);
|
||||
err = usb_submit_urb(urb, GFP_ATOMIC);
|
||||
if (err < 0) {
|
||||
/* -EPERM: urb is being killed;
|
||||
* -ENODEV: device got disconnected
|
||||
*/
|
||||
if (err != -EPERM && err != -ENODEV)
|
||||
bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
|
||||
urb, -err);
|
||||
usb_unanchor_urb(urb);
|
||||
}
|
||||
}
|
||||
|
||||
static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev)
|
||||
{
|
||||
struct btusb_data *data = hci_get_drvdata(hdev);
|
||||
struct usb_ctrlrequest *dr;
|
||||
unsigned char *buf;
|
||||
int err, size = 64;
|
||||
unsigned int pipe;
|
||||
struct urb *urb;
|
||||
|
||||
urb = usb_alloc_urb(0, GFP_KERNEL);
|
||||
if (!urb)
|
||||
return -ENOMEM;
|
||||
|
||||
dr = kmalloc(sizeof(*dr), GFP_KERNEL);
|
||||
if (!dr) {
|
||||
usb_free_urb(urb);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_IN;
|
||||
dr->bRequest = 1;
|
||||
dr->wIndex = cpu_to_le16(0);
|
||||
dr->wValue = cpu_to_le16(48);
|
||||
dr->wLength = cpu_to_le16(size);
|
||||
|
||||
buf = kmalloc(size, GFP_KERNEL);
|
||||
if (!buf) {
|
||||
kfree(dr);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
pipe = usb_rcvctrlpipe(data->udev, 0);
|
||||
|
||||
usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
|
||||
buf, size, btusb_mtk_wmt_recv, hdev);
|
||||
|
||||
urb->transfer_flags |= URB_FREE_BUFFER;
|
||||
|
||||
usb_anchor_urb(urb, &data->ctrl_anchor);
|
||||
err = usb_submit_urb(urb, GFP_KERNEL);
|
||||
if (err < 0) {
|
||||
if (err != -EPERM && err != -ENODEV)
|
||||
bt_dev_err(hdev, "urb %p submission failed (%d)",
|
||||
urb, -err);
|
||||
usb_unanchor_urb(urb);
|
||||
}
|
||||
|
||||
usb_free_urb(urb);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
|
||||
struct btmtk_hci_wmt_params *wmt_params)
|
||||
{
|
||||
struct btusb_data *data = hci_get_drvdata(hdev);
|
||||
struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
|
||||
u32 hlen, status = BTMTK_WMT_INVALID;
|
||||
struct btmtk_hci_wmt_evt *wmt_evt;
|
||||
struct btmtk_hci_wmt_cmd wc;
|
||||
struct btmtk_wmt_hdr *hdr;
|
||||
int err;
|
||||
|
||||
/* Submit control IN URB on demand to process the WMT event */
|
||||
err = btusb_mtk_submit_wmt_recv_urb(hdev);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* Send the WMT command and wait until the WMT event returns */
|
||||
hlen = sizeof(*hdr) + wmt_params->dlen;
|
||||
if (hlen > 255)
|
||||
return -EINVAL;
|
||||
|
||||
hdr = (struct btmtk_wmt_hdr *)&wc;
|
||||
hdr->dir = 1;
|
||||
hdr->op = wmt_params->op;
|
||||
hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
|
||||
hdr->flag = wmt_params->flag;
|
||||
memcpy(wc.data, wmt_params->data, wmt_params->dlen);
|
||||
|
||||
set_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
|
||||
|
||||
err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
|
||||
|
||||
if (err < 0) {
|
||||
clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
|
||||
return err;
|
||||
}
|
||||
|
||||
/* The vendor specific WMT commands are all answered by a vendor
|
||||
* specific event and will have the Command Status or Command
|
||||
* Complete as with usual HCI command flow control.
|
||||
*
|
||||
* After sending the command, wait for BTUSB_TX_WAIT_VND_EVT
|
||||
* state to be cleared. The driver specific event receive routine
|
||||
* will clear that state and with that indicate completion of the
|
||||
* WMT command.
|
||||
*/
|
||||
err = wait_on_bit_timeout(&data->flags, BTUSB_TX_WAIT_VND_EVT,
|
||||
TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
|
||||
if (err == -EINTR) {
|
||||
bt_dev_err(hdev, "Execution of wmt command interrupted");
|
||||
clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
|
||||
return err;
|
||||
}
|
||||
|
||||
if (err) {
|
||||
bt_dev_err(hdev, "Execution of wmt command timed out");
|
||||
clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
/* Parse and handle the return WMT event */
|
||||
wmt_evt = (struct btmtk_hci_wmt_evt *)data->evt_skb->data;
|
||||
if (wmt_evt->whdr.op != hdr->op) {
|
||||
bt_dev_err(hdev, "Wrong op received %d expected %d",
|
||||
wmt_evt->whdr.op, hdr->op);
|
||||
err = -EIO;
|
||||
goto err_free_skb;
|
||||
}
|
||||
|
||||
switch (wmt_evt->whdr.op) {
|
||||
case BTMTK_WMT_SEMAPHORE:
|
||||
if (wmt_evt->whdr.flag == 2)
|
||||
status = BTMTK_WMT_PATCH_UNDONE;
|
||||
else
|
||||
status = BTMTK_WMT_PATCH_DONE;
|
||||
break;
|
||||
case BTMTK_WMT_FUNC_CTRL:
|
||||
wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
|
||||
if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
|
||||
status = BTMTK_WMT_ON_DONE;
|
||||
else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
|
||||
status = BTMTK_WMT_ON_PROGRESS;
|
||||
else
|
||||
status = BTMTK_WMT_ON_UNDONE;
|
||||
break;
|
||||
}
|
||||
|
||||
if (wmt_params->status)
|
||||
*wmt_params->status = status;
|
||||
|
||||
err_free_skb:
|
||||
kfree_skb(data->evt_skb);
|
||||
data->evt_skb = NULL;
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
|
||||
{
|
||||
struct btmtk_hci_wmt_params wmt_params;
|
||||
const struct firmware *fw;
|
||||
const u8 *fw_ptr;
|
||||
size_t fw_size;
|
||||
int err, dlen;
|
||||
u8 flag;
|
||||
|
||||
err = request_firmware(&fw, fwname, &hdev->dev);
|
||||
if (err < 0) {
|
||||
bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
fw_ptr = fw->data;
|
||||
fw_size = fw->size;
|
||||
|
||||
/* The size of patch header is 30 bytes, should be skip */
|
||||
if (fw_size < 30)
|
||||
goto err_release_fw;
|
||||
|
||||
fw_size -= 30;
|
||||
fw_ptr += 30;
|
||||
flag = 1;
|
||||
|
||||
wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
|
||||
wmt_params.status = NULL;
|
||||
|
||||
while (fw_size > 0) {
|
||||
dlen = min_t(int, 250, fw_size);
|
||||
|
||||
/* Tell deivice the position in sequence */
|
||||
if (fw_size - dlen <= 0)
|
||||
flag = 3;
|
||||
else if (fw_size < fw->size - 30)
|
||||
flag = 2;
|
||||
|
||||
wmt_params.flag = flag;
|
||||
wmt_params.dlen = dlen;
|
||||
wmt_params.data = fw_ptr;
|
||||
|
||||
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
|
||||
if (err < 0) {
|
||||
bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
|
||||
err);
|
||||
goto err_release_fw;
|
||||
}
|
||||
|
||||
fw_size -= dlen;
|
||||
fw_ptr += dlen;
|
||||
}
|
||||
|
||||
wmt_params.op = BTMTK_WMT_RST;
|
||||
wmt_params.flag = 4;
|
||||
wmt_params.dlen = 0;
|
||||
wmt_params.data = NULL;
|
||||
wmt_params.status = NULL;
|
||||
|
||||
/* Activate funciton the firmware providing to */
|
||||
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
|
||||
if (err < 0) {
|
||||
bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
/* Wait a few moments for firmware activation done */
|
||||
usleep_range(10000, 12000);
|
||||
|
||||
err_release_fw:
|
||||
release_firmware(fw);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int btusb_mtk_func_query(struct hci_dev *hdev)
|
||||
{
|
||||
struct btmtk_hci_wmt_params wmt_params;
|
||||
int status, err;
|
||||
u8 param = 0;
|
||||
|
||||
/* Query whether the function is enabled */
|
||||
wmt_params.op = BTMTK_WMT_FUNC_CTRL;
|
||||
wmt_params.flag = 4;
|
||||
wmt_params.dlen = sizeof(param);
|
||||
wmt_params.data = ¶m;
|
||||
wmt_params.status = &status;
|
||||
|
||||
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
|
||||
if (err < 0) {
|
||||
bt_dev_err(hdev, "Failed to query function status (%d)", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
static int btusb_mtk_reg_read(struct btusb_data *data, u32 reg, u32 *val)
|
||||
{
|
||||
int pipe, err, size = sizeof(u32);
|
||||
void *buf;
|
||||
|
||||
buf = kzalloc(size, GFP_KERNEL);
|
||||
if (!buf)
|
||||
return -ENOMEM;
|
||||
|
||||
pipe = usb_rcvctrlpipe(data->udev, 0);
|
||||
err = usb_control_msg(data->udev, pipe, 0x63,
|
||||
USB_TYPE_VENDOR | USB_DIR_IN,
|
||||
reg >> 16, reg & 0xffff,
|
||||
buf, size, USB_CTRL_SET_TIMEOUT);
|
||||
if (err < 0)
|
||||
goto err_free_buf;
|
||||
|
||||
*val = get_unaligned_le32(buf);
|
||||
|
||||
err_free_buf:
|
||||
kfree(buf);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int btusb_mtk_id_get(struct btusb_data *data, u32 *id)
|
||||
{
|
||||
return btusb_mtk_reg_read(data, 0x80000008, id);
|
||||
}
|
||||
|
||||
static int btusb_mtk_setup(struct hci_dev *hdev)
|
||||
{
|
||||
struct btusb_data *data = hci_get_drvdata(hdev);
|
||||
struct btmtk_hci_wmt_params wmt_params;
|
||||
ktime_t calltime, delta, rettime;
|
||||
struct btmtk_tci_sleep tci_sleep;
|
||||
unsigned long long duration;
|
||||
struct sk_buff *skb;
|
||||
const char *fwname;
|
||||
int err, status;
|
||||
u32 dev_id;
|
||||
u8 param;
|
||||
|
||||
calltime = ktime_get();
|
||||
|
||||
err = btusb_mtk_id_get(data, &dev_id);
|
||||
if (err < 0) {
|
||||
bt_dev_err(hdev, "Failed to get device id (%d)", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
switch (dev_id) {
|
||||
case 0x7668:
|
||||
fwname = FIRMWARE_MT7668;
|
||||
break;
|
||||
default:
|
||||
bt_dev_err(hdev, "Unsupported support hardware variant (%08x)",
|
||||
dev_id);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Query whether the firmware is already download */
|
||||
wmt_params.op = BTMTK_WMT_SEMAPHORE;
|
||||
wmt_params.flag = 1;
|
||||
wmt_params.dlen = 0;
|
||||
wmt_params.data = NULL;
|
||||
wmt_params.status = &status;
|
||||
|
||||
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
|
||||
if (err < 0) {
|
||||
bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
if (status == BTMTK_WMT_PATCH_DONE) {
|
||||
bt_dev_info(hdev, "firmware already downloaded");
|
||||
goto ignore_setup_fw;
|
||||
}
|
||||
|
||||
/* Setup a firmware which the device definitely requires */
|
||||
err = btusb_mtk_setup_firmware(hdev, fwname);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
ignore_setup_fw:
|
||||
err = readx_poll_timeout(btusb_mtk_func_query, hdev, status,
|
||||
status < 0 || status != BTMTK_WMT_ON_PROGRESS,
|
||||
2000, 5000000);
|
||||
/* -ETIMEDOUT happens */
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* The other errors happen in btusb_mtk_func_query */
|
||||
if (status < 0)
|
||||
return status;
|
||||
|
||||
if (status == BTMTK_WMT_ON_DONE) {
|
||||
bt_dev_info(hdev, "function already on");
|
||||
goto ignore_func_on;
|
||||
}
|
||||
|
||||
/* Enable Bluetooth protocol */
|
||||
param = 1;
|
||||
wmt_params.op = BTMTK_WMT_FUNC_CTRL;
|
||||
wmt_params.flag = 0;
|
||||
wmt_params.dlen = sizeof(param);
|
||||
wmt_params.data = ¶m;
|
||||
wmt_params.status = NULL;
|
||||
|
||||
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
|
||||
if (err < 0) {
|
||||
bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
ignore_func_on:
|
||||
/* Apply the low power environment setup */
|
||||
tci_sleep.mode = 0x5;
|
||||
tci_sleep.duration = cpu_to_le16(0x640);
|
||||
tci_sleep.host_duration = cpu_to_le16(0x640);
|
||||
tci_sleep.host_wakeup_pin = 0;
|
||||
tci_sleep.time_compensation = 0;
|
||||
|
||||
skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
|
||||
HCI_INIT_TIMEOUT);
|
||||
if (IS_ERR(skb)) {
|
||||
err = PTR_ERR(skb);
|
||||
bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
|
||||
return err;
|
||||
}
|
||||
kfree_skb(skb);
|
||||
|
||||
rettime = ktime_get();
|
||||
delta = ktime_sub(rettime, calltime);
|
||||
duration = (unsigned long long)ktime_to_ns(delta) >> 10;
|
||||
|
||||
bt_dev_info(hdev, "Device setup in %llu usecs", duration);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int btusb_mtk_shutdown(struct hci_dev *hdev)
|
||||
{
|
||||
struct btmtk_hci_wmt_params wmt_params;
|
||||
u8 param = 0;
|
||||
int err;
|
||||
|
||||
/* Disable the device */
|
||||
wmt_params.op = BTMTK_WMT_FUNC_CTRL;
|
||||
wmt_params.flag = 0;
|
||||
wmt_params.dlen = sizeof(param);
|
||||
wmt_params.data = ¶m;
|
||||
wmt_params.status = NULL;
|
||||
|
||||
err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
|
||||
if (err < 0) {
|
||||
bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
MODULE_FIRMWARE(FIRMWARE_MT7668);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
|
||||
static int marvell_config_oob_wake(struct hci_dev *hdev)
|
||||
|
|
@ -3046,6 +3612,7 @@ static int btusb_probe(struct usb_interface *intf,
|
|||
init_usb_anchor(&data->bulk_anchor);
|
||||
init_usb_anchor(&data->isoc_anchor);
|
||||
init_usb_anchor(&data->diag_anchor);
|
||||
init_usb_anchor(&data->ctrl_anchor);
|
||||
spin_lock_init(&data->rxlock);
|
||||
|
||||
if (id->driver_info & BTUSB_INTEL_NEW) {
|
||||
|
|
@ -3159,6 +3726,15 @@ static int btusb_probe(struct usb_interface *intf,
|
|||
if (id->driver_info & BTUSB_MARVELL)
|
||||
hdev->set_bdaddr = btusb_set_bdaddr_marvell;
|
||||
|
||||
#ifdef CONFIG_BT_HCIBTUSB_MTK
|
||||
if (id->driver_info & BTUSB_MEDIATEK) {
|
||||
hdev->setup = btusb_mtk_setup;
|
||||
hdev->shutdown = btusb_mtk_shutdown;
|
||||
hdev->manufacturer = 70;
|
||||
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
|
||||
}
|
||||
#endif
|
||||
|
||||
if (id->driver_info & BTUSB_SWAVE) {
|
||||
set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
|
||||
set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче