iio: adc: max1363: convert probe to full device-managed

For this conversion, the 2 regulators (being enabled) require each a
devm_add_action_or_reset() hook registration.

For the other functions, there are device-managed variants.

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210926162110.3536436-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Alexandru Ardelean 2021-09-26 19:21:10 +03:00 коммит произвёл Jonathan Cameron
Родитель 4415381093
Коммит a1ff6d2526
1 изменённых файлов: 30 добавлений и 52 удалений

Просмотреть файл

@ -1577,6 +1577,11 @@ static const struct of_device_id max1363_of_match[] = {
};
MODULE_DEVICE_TABLE(of, max1363_of_match);
static void max1363_reg_disable(void *reg)
{
regulator_disable(reg);
}
static int max1363_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@ -1590,7 +1595,8 @@ static int max1363_probe(struct i2c_client *client,
if (!indio_dev)
return -ENOMEM;
ret = iio_map_array_register(indio_dev, client->dev.platform_data);
ret = devm_iio_map_array_register(&client->dev, indio_dev,
client->dev.platform_data);
if (ret < 0)
return ret;
@ -1598,17 +1604,16 @@ static int max1363_probe(struct i2c_client *client,
mutex_init(&st->lock);
st->reg = devm_regulator_get(&client->dev, "vcc");
if (IS_ERR(st->reg)) {
ret = PTR_ERR(st->reg);
goto error_unregister_map;
}
if (IS_ERR(st->reg))
return PTR_ERR(st->reg);
ret = regulator_enable(st->reg);
if (ret)
goto error_unregister_map;
return ret;
/* this is only used for device removal purposes */
i2c_set_clientdata(client, indio_dev);
ret = devm_add_action_or_reset(&client->dev, max1363_reg_disable, st->reg);
if (ret)
return ret;
st->chip_info = device_get_match_data(&client->dev);
if (!st->chip_info)
@ -1622,13 +1627,17 @@ static int max1363_probe(struct i2c_client *client,
ret = regulator_enable(vref);
if (ret)
goto error_disable_reg;
return ret;
ret = devm_add_action_or_reset(&client->dev, max1363_reg_disable, vref);
if (ret)
return ret;
st->vref = vref;
vref_uv = regulator_get_voltage(vref);
if (vref_uv <= 0) {
ret = -EINVAL;
goto error_disable_reg;
}
if (vref_uv <= 0)
return -EINVAL;
st->vref_uv = vref_uv;
}
@ -1640,13 +1649,12 @@ static int max1363_probe(struct i2c_client *client,
st->send = max1363_smbus_send;
st->recv = max1363_smbus_recv;
} else {
ret = -EOPNOTSUPP;
goto error_disable_reg;
return -EOPNOTSUPP;
}
ret = max1363_alloc_scan_masks(indio_dev);
if (ret)
goto error_disable_reg;
return ret;
indio_dev->name = id->name;
indio_dev->channels = st->chip_info->channels;
@ -1655,12 +1663,12 @@ static int max1363_probe(struct i2c_client *client,
indio_dev->modes = INDIO_DIRECT_MODE;
ret = max1363_initial_setup(st);
if (ret < 0)
goto error_disable_reg;
return ret;
ret = iio_triggered_buffer_setup(indio_dev, NULL,
&max1363_trigger_handler, NULL);
ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL,
&max1363_trigger_handler, NULL);
if (ret)
goto error_disable_reg;
return ret;
if (client->irq) {
ret = devm_request_threaded_irq(&client->dev, st->client->irq,
@ -1671,39 +1679,10 @@ static int max1363_probe(struct i2c_client *client,
indio_dev);
if (ret)
goto error_uninit_buffer;
return ret;
}
ret = iio_device_register(indio_dev);
if (ret < 0)
goto error_uninit_buffer;
return 0;
error_uninit_buffer:
iio_triggered_buffer_cleanup(indio_dev);
error_disable_reg:
if (st->vref)
regulator_disable(st->vref);
regulator_disable(st->reg);
error_unregister_map:
iio_map_array_unregister(indio_dev);
return ret;
}
static int max1363_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct max1363_state *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
iio_triggered_buffer_cleanup(indio_dev);
if (st->vref)
regulator_disable(st->vref);
regulator_disable(st->reg);
iio_map_array_unregister(indio_dev);
return 0;
return devm_iio_device_register(&client->dev, indio_dev);
}
static const struct i2c_device_id max1363_id[] = {
@ -1756,7 +1735,6 @@ static struct i2c_driver max1363_driver = {
.of_match_table = max1363_of_match,
},
.probe = max1363_probe,
.remove = max1363_remove,
.id_table = max1363_id,
};
module_i2c_driver(max1363_driver);