Merge branch 'linus' into perf/core

Pick up the latest ring-buffer fixes, before applying a new fix. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-18 11:17:17 +02:00 · 2012-07-18 11:17:17 +02:00 · a2fe194723
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@ -142,13 +142,14 @@ KernelVersion:	3.4
 Contact:	linux-mtd@lists.infradead.org
 Description:
 		This allows the user to examine and adjust the criteria by which
-		mtd returns -EUCLEAN from mtd_read().  If the maximum number of
-		bit errors that were corrected on any single region comprising
-		an ecc step (as reported by the driver) equals or exceeds this
-		value, -EUCLEAN is returned.  Otherwise, absent an error, 0 is
-		returned.  Higher layers (e.g., UBI) use this return code as an
-		indication that an erase block may be degrading and should be
-		scrutinized as a candidate for being marked as bad.
+		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
+		maximum number of bit errors that were corrected on any single
+		region comprising an ecc step (as reported by the driver) equals
+		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
+		an error, 0 is returned.  Higher layers (e.g., UBI) use this
+		return code as an indication that an erase block may be
+		degrading and should be scrutinized as a candidate for being
+		marked as bad.

 		The initial value may be specified by the flash device driver.
 		If not, then the default value is ecc_strength.
@ -167,7 +168,7 @@ Description:
 		block degradation, but high enough to avoid the consequences of
 		a persistent return value of -EUCLEAN on devices where sticky
 		bitflips occur.  Note that if bitflip_threshold exceeds
-		ecc_strength, -EUCLEAN is never returned by mtd_read().
+		ecc_strength, -EUCLEAN is never returned by the read operations.
 		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
 		returned, absent a hard error.

--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@ -3988,7 +3988,7 @@ interface and may change in the future.</para>
 	    from RGB to Y'CbCr color space.
 	    </entry>
 	  </row>
-	  <row id = "v4l2-jpeg-chroma-subsampling">
+	  <row>
 	    <entrytbl spanname="descr" cols="2">
 	      <tbody valign="top">
 		<row>
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@ -284,13 +284,6 @@ These controls are described in <xref
 	    processing controls. These controls are described in <xref
 	    linkend="image-process-controls" />.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
-	    <entry>0x9d0000</entry>
-	    <entry>The class containing JPEG compression controls.
-These controls are described in <xref
-		linkend="jpeg-controls" />.</entry>
-	  </row>
 	</tbody>
      </tgroup>
    </table>
--- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt
+++ b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
@ -2,6 +2,7 @@

 Required properties:
 - compatible : "fsl,mma8450".
+- reg: the I2C address of MMA8450

 Example:

--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@ -46,8 +46,8 @@ Examples:

 ecspi@70010000 { /* ECSPI1 */
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
-		   <&gpio3 25 0>; /* GPIO4_25 */
+	cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+		   <&gpio4 25 0>; /* GPIO4_25 */
 	status = "okay";

 	pmic: mc13892@0 {
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@ -29,6 +29,6 @@ esdhc@70008000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70008000 0x4000>;
 	interrupts = <2>;
-	cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
-	wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+	cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+	wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
 };
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@ -19,6 +19,6 @@ ethernet@83fec000 {
 	reg = <0x83fec000 0x4000>;
 	interrupts = <87>;
 	phy-mode = "mii";
-	phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
 };
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
@ -1626,3 +1626,5 @@ MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11		1587
 MX6Q_PAD_SD2_DAT3__GPIO_1_12			1588
 MX6Q_PAD_SD2_DAT3__SJC_DONE			1589
 MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3		1590
+MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID		1591
+MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID		1592
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@ -17,6 +17,6 @@ ecspi@70010000 {
 	reg = <0x70010000 0x4000>;
 	interrupts = <36>;
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
-		   <&gpio3 25 0>; /* GPIO4_25 */
+	cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
+		   <&gpio3 25 0>; /* GPIO3_25 */
 };
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@ -3,6 +3,7 @@ Device tree binding vendor prefix registry.  Keep list in alphabetical order.
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.

+ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 apm	Applied Micro Circuits Corporation (APM)
--- a/Documentation/prctl/no_new_privs.txt
+++ b/Documentation/prctl/no_new_privs.txt
@ -25,6 +25,13 @@ bits will no longer change the uid or gid; file capabilities will not
 add to the permitted set, and LSMs will not relax constraints after
 execve.

+To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0).
+
+Be careful, though: LSMs might also not tighten constraints on exec
+in no_new_privs mode.  (This means that setting up a general-purpose
+service launcher to set no_new_privs before execing daemons may
+interfere with LSM-based sandboxing.)
+
 Note that no_new_privs does not prevent privilege changes that do not
 involve execve.  An appropriately privileged task can still call
 setuid(2) and receive SCM_RIGHTS datagrams.
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@ -1930,6 +1930,23 @@ The "pte_enc" field provides a value that can OR'ed into the hash
 PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
 into the hash PTE second double word).

+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event.  When
+an event is tiggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin.  The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+
 5. The kvm_run structure
 ------------------------

--- a/6
+++ b/6
@ -3433,13 +3433,14 @@ S:	Supported
 F:	drivers/idle/i7300_idle.c

 IEEE 802.15.4 SUBSYSTEM
+M:	Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
 M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://apps.sourceforge.net/trac/linux-zigbee
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
 F:	net/ieee802154/
+F:	net/mac802154/
 F:	drivers/ieee802154/

 IIO SUBSYSTEM AND DRIVERS
@ -4857,6 +4858,7 @@ M:	Kevin Hilman <khilman@ti.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*pm*
+F:	drivers/cpufreq/omap-cpufreq.c

 OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT
 M:	Rajendra Nayak <rnayak@ti.com>
@ -5909,7 +5911,7 @@ M:	Ingo Molnar <mingo@redhat.com>
 M:	Peter Zijlstra <peterz@infradead.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
-F:	kernel/sched*
+F:	kernel/sched/
 F:	include/linux/sched.h

 SCORE ARCHITECTURE
--- a/2
+++ b/2
@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel

 # *DOCUMENTATION*
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_LIBUSUAL=y
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@ -243,7 +243,7 @@ typedef struct {

 #define ATOMIC64_INIT(i) { (i) }

-static inline u64 atomic64_read(atomic64_t *v)
+static inline u64 atomic64_read(const atomic64_t *v)
 {
 	u64 result;

--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@ -60,13 +60,13 @@
 #ifndef __ASSEMBLY__

 #ifdef CONFIG_CPU_USE_DOMAINS
-#define set_domain(x)					\
-	do {						\
-	__asm__ __volatile__(				\
-	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
-	  : : "r" (x));					\
-	isb();						\
-	} while (0)
+static inline void set_domain(unsigned val)
+{
+	asm volatile(
+	"mcr	p15, 0, %0, c3, c0	@ set domain"
+	  : : "r" (val));
+	isb();
+}

 #define modify_domain(dom,type)					\
 	do {							\
@ -78,8 +78,8 @@
 	} while (0)

 #else
-#define set_domain(x)		do { } while (0)
-#define modify_domain(dom,type)	do { } while (0)
+static inline void set_domain(unsigned val) { }
+static inline void modify_domain(unsigned dom, unsigned type)	{ }
 #endif

 /*
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@ -148,7 +148,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
 #define TIF_SYSCALL_AUDIT	9
-#define TIF_SYSCALL_RESTARTSYS	10
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
@ -164,11 +163,9 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
-#define _TIF_SYSCALL_RESTARTSYS	(1 << TIF_SYSCALL_RESTARTSYS)

 /* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
-			   _TIF_SYSCALL_RESTARTSYS)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)

 /*
 * Change these and you break ASM code in entry-common.S
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@ -187,8 +187,8 @@ void kprobe_arm_test_cases(void)
 	TEST_BF_R ("mov	pc, r",0,2f,"")
 	TEST_BF_RR("mov	pc, r",0,2f,", asl r",1,0,"")
 	TEST_BB(   "sub	pc, pc, #1b-2b+8")
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_BB(   "sub	pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
+	TEST_BB(   "sub	pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
 #endif
 	TEST_BB_R( "sub	pc, pc, r",14, 1f-2f+8,"")
 	TEST_BB_R( "rsb	pc, r",14,1f-2f+8,", pc")
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@ -503,7 +503,7 @@ __hw_perf_event_init(struct perf_event *event)
 	     event_requires_mode_exclusion(&event->attr)) {
 		pr_debug("ARM performance counters do not support "
 			 "mode exclusion\n");
-		return -EPERM;
+		return -EOPNOTSUPP;
 	}

 	/*
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@ -25,7 +25,6 @@
 #include <linux/regset.h>
 #include <linux/audit.h>
 #include <linux/tracehook.h>
-#include <linux/unistd.h>

 #include <asm/pgtable.h>
 #include <asm/traps.h>
@ -918,8 +917,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 		audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);

-	if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS))
-		scno = __NR_restart_syscall - __NR_SYSCALL_BASE;
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		return scno;

--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@ -27,6 +27,7 @@
 */
 #define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
 #define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART		(0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)

 /*
 * With EABI, the syscall number has to be loaded into r7.
@ -46,6 +47,18 @@ const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };

+/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled.  In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
+	0xe49df004,		/* ldr	pc, [sp], #4 */
+};
+
 /*
 * atomically swap in the new signal mask, and wait for a signal.
 */
@ -592,10 +605,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
 		case -ERESTARTNOHAND:
 		case -ERESTARTSYS:
 		case -ERESTARTNOINTR:
-		case -ERESTART_RESTARTBLOCK:
 			regs->ARM_r0 = regs->ARM_ORIG_r0;
 			regs->ARM_pc = restart_addr;
 			break;
+		case -ERESTART_RESTARTBLOCK:
+			regs->ARM_r0 = -EINTR;
+			break;
 		}
 	}

@ -611,14 +626,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
 		 * debugger has chosen to restart at a different PC.
 		 */
 		if (regs->ARM_pc == restart_addr) {
-			if (retval == -ERESTARTNOHAND ||
-			    retval == -ERESTART_RESTARTBLOCK
+			if (retval == -ERESTARTNOHAND
 			    || (retval == -ERESTARTSYS
 				&& !(ka.sa.sa_flags & SA_RESTART))) {
 				regs->ARM_r0 = -EINTR;
 				regs->ARM_pc = continue_addr;
 			}
-			clear_thread_flag(TIF_SYSCALL_RESTARTSYS);
 		}

 		handle_signal(signr, &ka, &info, regs);
@ -632,8 +645,29 @@ static void do_signal(struct pt_regs *regs, int syscall)
 		 * ignore the restart.
 		 */
 		if (retval == -ERESTART_RESTARTBLOCK
-		    && regs->ARM_pc == restart_addr)
-			set_thread_flag(TIF_SYSCALL_RESTARTSYS);
+		    && regs->ARM_pc == continue_addr) {
+			if (thumb_mode(regs)) {
+				regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
+				regs->ARM_pc -= 2;
+			} else {
+#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
+				regs->ARM_r7 = __NR_restart_syscall;
+				regs->ARM_pc -= 4;
+#else
+				u32 __user *usp;
+
+				regs->ARM_sp -= 4;
+				usp = (u32 __user *)regs->ARM_sp;
+
+				if (put_user(regs->ARM_pc, usp) == 0) {
+					regs->ARM_pc = KERN_RESTART_CODE;
+				} else {
+					regs->ARM_sp += 4;
+					force_sigsegv(0, current);
+				}
+#endif
+			}
+		}
 	}

 	restore_saved_sigmask();
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@ -8,5 +8,7 @@
 * published by the Free Software Foundation.
 */
 #define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))

 extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@ -820,6 +820,8 @@ void __init early_trap_init(void *vectors_base)
 	 */
 	memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
 	       sigreturn_codes, sizeof(sigreturn_codes));
+	memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+	       syscall_restart_code, sizeof(syscall_restart_code));

 	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@ -50,5 +50,6 @@
 #define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)

 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE | 0x0300)

 #endif
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@ -78,6 +78,7 @@

 /* North-South Bridge */
 #define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x20000)

 /* Cryptographic Engine */
 #define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@ -119,7 +119,9 @@ static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
 						struct exynos_pm_domain *pd)
 {
 	if (pdev->dev.bus) {
-		if (pm_genpd_add_device(&pd->pd, &pdev->dev))
+		if (!pm_genpd_add_device(&pd->pd, &pdev->dev))
+			pm_genpd_dev_need_restore(&pdev->dev, true);
+		else
 			pr_info("%s: error in adding %s device to %s power"
 				"domain\n", __func__, dev_name(&pdev->dev),
 				pd->name);
@ -151,9 +153,12 @@ static __init int exynos4_pm_init_power_domain(void)
 	if (of_have_populated_dt())
 		return exynos_pm_dt_parse_domains();

-	for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
-		pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
-				exynos4_pm_domains[idx]->is_off);
+	for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) {
+		struct exynos_pm_domain *pd = exynos4_pm_domains[idx];
+		int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+
+		pm_genpd_init(&pd->pd, NULL, !on);
+	}

 #ifdef CONFIG_S5P_DEV_FIMD0
 	exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@ -201,7 +201,6 @@ int __init mx35_clocks_init()
 			pr_err("i.MX35 clk %d: register failed with %ld\n",
 				i, PTR_ERR(clk[i]));

-
 	clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
 	clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
 	clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
@ -264,6 +263,14 @@ int __init mx35_clocks_init()
 	clk_prepare_enable(clk[iim_gate]);
 	clk_prepare_enable(clk[emi_gate]);

+	/*
+	 * SCC is needed to boot via mmc after a watchdog reset. The clock code
+	 * before conversion to common clk also enabled UART1 (which isn't
+	 * handled here and not needed for mmc) and IIM (which is enabled
+	 * unconditionally above).
+	 */
+	clk_prepare_enable(clk[scc_gate]);
+
 	imx_print_silicon_rev("i.MX35", mx35_revision());

 #ifdef CONFIG_MXC_USE_EPIT
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@ -38,7 +38,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>

--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio)	((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio)	(1 << ((gpio) & 0x1f))
-
-#define GPLR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@ -31,5 +31,6 @@
 #define IRQ_MASK_HIGH_OFF	0x0014

 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)

 #endif
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@ -42,6 +42,7 @@
 #define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
 #define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
 #define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE	0xfe400000
 #define MV78XX0_CORE_REGS_SIZE		SZ_16K

 #define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
@ -59,6 +60,7 @@
 * Core-specific peripheral registers.
 */
 #define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE	(MV78XX0_CORE_REGS_PHYS_BASE)

 /*
 * Register Map
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@ -205,6 +205,16 @@ static int apx4devkit_phy_fixup(struct phy_device *phy)
 	return 0;
 }

+static void __init apx4devkit_fec_phy_clk_enable(void)
+{
+	struct clk *clk;
+
+	/* Enable fec phy clock */
+	clk = clk_get_sys("enet_out", NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+}
+
 static void __init apx4devkit_init(void)
 {
 	mx28_soc_init();
@ -225,6 +235,7 @@ static void __init apx4devkit_init(void)
 	phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
 			apx4devkit_phy_fixup);

+	apx4devkit_fec_phy_clk_enable();
 	mx28_add_fec(0, &mx28_fec_pdata);

 	mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@ -494,8 +494,8 @@ static void __init overo_init(void)

 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_hsmmc_init(mmc);
 	overo_i2c_init();
+	omap_hsmmc_init(mmc);
 	omap_display_init(&overo_dss_data);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@ -31,12 +31,16 @@
 *
 * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
 *     clockdomain.  (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ *     active whenever the MPU is active.  True for interconnects and
+ *     the WKUP clockdomains.
 */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
 #define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
 #define CLKDM_CAN_ENABLE_AUTO			(1 << 2)
 #define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
 #define CLKDM_NO_AUTODEPS			(1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU			(1 << 5)

 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = {
 	.name		= "wkup_clkdm",
 	.pwrdm		= { .name = "wkup_pwrdm" },
 	.dep_bit	= OMAP_EN_WKUP_SHIFT,
+	.flags		= CLKDM_ACTIVE_WITH_MPU,
 };
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = {
 	.cm_inst	  = OMAP4430_PRM_WKUP_CM_INST,
 	.clkdm_offs	  = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
 	.dep_bit	  = OMAP4430_L4WKUP_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP,
+	.flags		  = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
 };

 static struct clockdomain emu_sys_44xx_clkdm = {
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap
 * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
 * @oh: struct omap_hwmod *
 *
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle.  If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby.  No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes.  No return value.
 */
 static void _enable_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
+	bool clkdm_act;

 	if (!oh->class->sysc)
 		return;
@ -1141,6 +1144,14 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	sf = oh->class->sysc->sysc_flags;

 	if (sf & SYSC_HAS_SIDLEMODE) {
+		clkdm_act = ((oh->clkdm &&
+			      oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+			     (oh->_clk && oh->_clk->clkdm &&
+			      oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+		if (clkdm_act && !(oh->class->sysc->idlemodes &
+				   (SIDLE_SMART | SIDLE_SMART_WKUP)))
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
 			idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
 				HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	sf = oh->class->sysc->sysc_flags;

 	if (sf & SYSC_HAS_SIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		/* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+		if (oh->flags & HWMOD_SWSUP_SIDLE ||
+		    !(oh->class->sysc->idlemodes &
+		      (SIDLE_SMART | SIDLE_SMART_WKUP)))
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
+			idlemode = HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
 	}

--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@ -1928,7 +1928,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = {

 static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
 	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+	{ .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" },
 };

 static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
@ -1963,7 +1963,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = {

 static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
 	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+	{ .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" },
 };

 static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
@ -1998,7 +1998,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = {

 static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
 	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+	{ .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" },
 };

 static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
@ -2033,7 +2033,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = {

 static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
 	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+	{ .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" },
 };

 static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
@ -3864,7 +3864,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
 };

 /* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
 	.master		= &omap44xx_usb_host_fs_hwmod,
 	.slave		= &omap44xx_l3_main_2_hwmod,
 	.clk		= "l3_div_ck",
@ -3922,7 +3922,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
 };

 /* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
 	.master		= &omap44xx_aess_hwmod,
 	.slave		= &omap44xx_l4_abe_hwmod,
 	.clk		= "ocp_abe_iclk",
@ -4013,7 +4013,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = {
 };

 /* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_aess_hwmod,
 	.clk		= "ocp_abe_iclk",
@ -4031,7 +4031,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = {
 };

 /* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_aess_hwmod,
 	.clk		= "ocp_abe_iclk",
@ -5857,7 +5857,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_fs_addrs[] = {
 };

 /* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_usb_host_fs_hwmod,
 	.clk		= "l4_div_ck",
@ -6014,13 +6014,13 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_iva__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_2,
 	&omap44xx_l4_cfg__l3_main_2,
-	&omap44xx_usb_host_fs__l3_main_2,
+	/* &omap44xx_usb_host_fs__l3_main_2, */
 	&omap44xx_usb_host_hs__l3_main_2,
 	&omap44xx_usb_otg_hs__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_3,
 	&omap44xx_l3_main_2__l3_main_3,
 	&omap44xx_l4_cfg__l3_main_3,
-	&omap44xx_aess__l4_abe,
+	/* &omap44xx_aess__l4_abe, */
 	&omap44xx_dsp__l4_abe,
 	&omap44xx_l3_main_1__l4_abe,
 	&omap44xx_mpu__l4_abe,
@ -6029,8 +6029,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__l4_wkup,
 	&omap44xx_mpu__mpu_private,
 	&omap44xx_l4_cfg__ocp_wp_noc,
-	&omap44xx_l4_abe__aess,
-	&omap44xx_l4_abe__aess_dma,
+	/* &omap44xx_l4_abe__aess, */
+	/* &omap44xx_l4_abe__aess_dma, */
 	&omap44xx_l3_main_2__c2c,
 	&omap44xx_l4_wkup__counter_32k,
 	&omap44xx_l4_cfg__ctrl_module_core,
@ -6136,7 +6136,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_per__uart2,
 	&omap44xx_l4_per__uart3,
 	&omap44xx_l4_per__uart4,
-	&omap44xx_l4_cfg__usb_host_fs,
+	/* &omap44xx_l4_cfg__usb_host_fs, */
 	&omap44xx_l4_cfg__usb_host_hs,
 	&omap44xx_l4_cfg__usb_otg_hs,
 	&omap44xx_l4_cfg__usb_tll_hs,
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@ -32,6 +32,7 @@
 #include "twl-common.h"
 #include "pm.h"
 #include "voltage.h"
+#include "mux.h"

 static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.addr		= 0x48,
@ -77,6 +78,7 @@ void __init omap4_pmic_init(const char *pmic_type,
 		    struct twl6040_platform_data *twl6040_data, int twl6040_irq)
 {
 	/* PMIC part*/
+	omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
 		sizeof(omap4_i2c1_board_info[0].type));
 	omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@ -127,7 +127,11 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO19_SSP2_SCLK,
 	GPIO86_SSP2_RXD,
 	GPIO87_SSP2_TXD,
-	GPIO88_GPIO,
+	GPIO88_GPIO | MFP_LPM_DRIVE_HIGH,	/* TSC2046_CS */
+
+	/* BQ24022 Regulator */
+	GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_nCHARGE_EN */
+	GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_ISET2 */

 	/* HX4700 specific input GPIOs */
 	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
@ -135,6 +139,10 @@ static unsigned long hx4700_pin_config[] __initdata = {
 	GPIO14_GPIO,	/* nWLAN_IRQ */

 	/* HX4700 specific output GPIOs */
+	GPIO61_GPIO | MFP_LPM_DRIVE_HIGH,	/* W3220_nRESET */
+	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* ASIC3_nRESET */
+	GPIO81_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_GP_nRESET */
+	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_HW_nRESET */
 	GPIO102_GPIO | MFP_LPM_DRIVE_LOW,	/* SYNAPTICS_POWER_ON */

 	GPIO10_GPIO,	/* GSM_IRQ */
@ -872,14 +880,19 @@ static struct gpio global_gpios[] = {
 	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
 	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
 	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+	{ GPIO61_HX4700_W3220_nRESET,     GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
 	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+	{ GPIO81_HX4700_CPU_GP_nRESET,    GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
 	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+	{ GPIO116_HX4700_CPU_HW_nRESET,   GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
 };

 static void __init hx4700_init(void)
 {
 	int ret;

+	PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
 	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
 	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@ -106,7 +106,7 @@ static struct clk s3c2440_clk_cam_upll = {
 static struct clk s3c2440_clk_ac97 = {
 	.name		= "ac97",
 	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+	.ctrlbit	= S3C2440_CLKCON_AC97,
 };

 static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@ -22,8 +22,13 @@
 #include <mach/common.h>
 #include <mach/emev2.h>

+#ifdef CONFIG_ARCH_SH73A0
 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
 			of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
 #define is_r8a7779() machine_is_marzen()

 #ifdef CONFIG_ARCH_EMEV2
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@ -625,11 +625,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&ab8500_device,
 };

-static struct platform_device *snowball_of_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-};
-
 static void __init mop500_init_machine(void)
 {
 	struct device *parent = NULL;
@ -769,6 +764,11 @@ MACHINE_END

 #ifdef CONFIG_MACH_UX500_DT

+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+	&snowball_led_dev,
+	&snowball_key_dev,
+};
+
 struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires DMA and call-back bindings. */
 	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
@ -786,6 +786,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+	/* Requires device name bindings. */
+	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
 	{},
 };

--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@ -63,8 +63,10 @@ static void __init ux500_timer_init(void)

 	/* TODO: Once MTU has been DT:ed place code above into else. */
 	if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
 		np = of_find_matching_node(NULL, prcmu_timer_of_match);
 		if (!np)
+#endif
 			goto dt_fail;

 		tmp_base = of_iomap(np, 0);
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@ -339,7 +339,6 @@ void __init pci_versatile_preinit(void)
 static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
-	int devslot = PCI_SLOT(dev->devfn);

 	/* slot,  pin,	irq
 	 *  24     1     27
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@ -1091,7 +1091,7 @@ error:
 	while (--i)
 		if (pages[i])
 			__free_pages(pages[i], 0);
-	if (array_size < PAGE_SIZE)
+	if (array_size <= PAGE_SIZE)
 		kfree(pages);
 	else
 		vfree(pages);
@ -1106,7 +1106,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t s
 	for (i = 0; i < count; i++)
 		if (pages[i])
 			__free_pages(pages[i], 0);
-	if (array_size < PAGE_SIZE)
+	if (array_size <= PAGE_SIZE)
 		kfree(pages);
 	else
 		vfree(pages);
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@ -64,7 +64,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 #ifdef CONFIG_ZONE_DMA
 extern phys_addr_t arm_dma_limit;
 #else
-#define arm_dma_limit ((u32)~0)
+#define arm_dma_limit ((phys_addr_t)~0)
 #endif

 extern phys_addr_t arm_lowmem_limit;
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@ -157,11 +157,13 @@ int s3c_adc_start(struct s3c_adc_client *client,
 		return -EINVAL;
 	}

-	if (client->is_ts && adc->ts_pend)
-		return -EAGAIN;
-
 	spin_lock_irqsave(&adc->lock, flags);

+	if (client->is_ts && adc->ts_pend) {
+		spin_unlock_irqrestore(&adc->lock, flags);
+		return -EAGAIN;
+	}
+
 	client->channel = channel;
 	client->nr_samples = nr_samples;

--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@ -126,7 +126,8 @@ struct platform_device s3c_device_adc = {
 #ifdef CONFIG_CPU_S3C2440
 static struct resource s3c_camif_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
-	[1] = DEFINE_RES_IRQ(IRQ_CAM),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
+	[2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
 };

 struct platform_device s3c_device_camif = {
--- a/arch/arm/plat-samsung/s5p-clock.c
+++ b/arch/arm/plat-samsung/s5p-clock.c
@ -37,6 +37,7 @@ struct clk clk_ext_xtal_mux = {
 struct clk clk_xusbxti = {
 	.name		= "xusbxti",
 	.id		= -1,
+	.rate		= 24000000,
 };

 struct clk s5p_clk_27m = {
--- a/arch/h8300/include/asm/pgtable.h
+++ b/arch/h8300/include/asm/pgtable.h
@ -70,4 +70,7 @@ extern int is_in_rom(unsigned long);
 #define	VMALLOC_END	0xffffffff

 #define arch_enter_lazy_cpu_mode()    do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
 #endif /* _H8300_PGTABLE_H */
--- a/arch/h8300/include/asm/uaccess.h
+++ b/arch/h8300/include/asm/uaccess.h
@ -100,7 +100,6 @@ extern int __put_user_bad(void);
 	break;							\
    default:							\
 	__gu_err = __get_user_bad();				\
-	__gu_val = 0;						\
 	break;							\
    }								\
    (x) = __gu_val;						\
@ -159,4 +158,6 @@ clear_user(void *to, unsigned long n)
 	return 0;
 }

+#define __clear_user	clear_user
+
 #endif /* _H8300_UACCESS_H */
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@ -447,7 +447,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 * want to handle. Thus you cannot kill init even with a SIGKILL even by
 * mistake.
 */
-statis void do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;
--- a/arch/h8300/kernel/time.c
+++ b/arch/h8300/kernel/time.c
@ -27,6 +27,7 @@
 #include <linux/profile.h>

 #include <asm/io.h>
+#include <asm/irq_regs.h>
 #include <asm/timer.h>

 #define	TICK_SIZE (tick_nsec / 1000)
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@ -129,7 +129,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)

 	/* setup reset gpio used by pci */
 	reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
-	if (reset_gpio > 0)
+	if (gpio_is_valid(reset_gpio))
 		devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");

 	/* enable auto-switching between PCI and EBU */
@ -192,7 +192,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)
 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);

 	/* toggle reset pin */
-	if (reset_gpio > 0) {
+	if (gpio_is_valid(reset_gpio)) {
 		__gpio_set_value(reset_gpio, 0);
 		wmb();
 		mdelay(1);
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@ -81,9 +81,6 @@ struct pt_regs {
 #define PTRACE_GETFPREGS          14
 #define PTRACE_SETFPREGS          15

-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD     0x00000001
-
 #ifdef __KERNEL__

 #define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@ -123,7 +123,7 @@ static inline unsigned long current_stack_pointer(void)
 }

 #ifndef CONFIG_KGDB
-void arch_release_thread_info(struct thread_info *ti)
+void arch_release_thread_info(struct thread_info *ti);
 #endif
 #define get_thread_info(ti)	get_task_struct((ti)->task)
 #define put_thread_info(ti)	put_task_struct((ti)->task)
--- a/arch/mn10300/include/asm/timex.h
+++ b/arch/mn10300/include/asm/timex.h
@ -11,7 +11,6 @@
 #ifndef _ASM_TIMEX_H
 #define _ASM_TIMEX_H

-#include <asm/hardirq.h>
 #include <unit/timex.h>

 #define TICK_SIZE (tick_nsec / 1000)
@ -30,16 +29,6 @@ static inline cycles_t get_cycles(void)
 extern int init_clockevents(void);
 extern int init_clocksource(void);

-static inline void setup_jiffies_interrupt(int irq,
-					   struct irqaction *action)
-{
-	u16 tmp;
-	setup_irq(irq, action);
-	set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
-	GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
-	tmp = GxICR(irq);
-}
-
 #endif /* __KERNEL__ */

 #endif /* _ASM_TIMEX_H */
--- a/arch/mn10300/kernel/cevt-mn10300.c
+++ b/arch/mn10300/kernel/cevt-mn10300.c
@ -70,6 +70,16 @@ static void event_handler(struct clock_event_device *dev)
 {
 }

+static inline void setup_jiffies_interrupt(int irq,
+					   struct irqaction *action)
+{
+	u16 tmp;
+	setup_irq(irq, action);
+	set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
+	GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+	tmp = GxICR(irq);
+}
+
 int __init init_clockevents(void)
 {
 	struct clock_event_device *cd;
--- a/arch/mn10300/kernel/internal.h
+++ b/arch/mn10300/kernel/internal.h
@ -9,6 +9,8 @@
 * 2 of the Licence, or (at your option) any later version.
 */

+#include <linux/irqreturn.h>
+
 struct clocksource;
 struct clock_event_device;

--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@ -170,9 +170,9 @@ mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask,
 	case SC1TXIRQ:
 #ifdef CONFIG_MN10300_TTYSM1_TIMER12
 	case TM12IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER9
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER9)
 	case TM9IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER3
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
 	case TM3IRQ:
 #endif /* CONFIG_MN10300_TTYSM1_TIMER12 */
 #endif /* CONFIG_MN10300_TTYSM1 */
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@ -26,6 +26,7 @@
 #include <linux/kdebug.h>
 #include <linux/bug.h>
 #include <linux/irq.h>
+#include <linux/export.h>
 #include <asm/processor.h>
 #include <linux/uaccess.h>
 #include <asm/io.h>
--- a/arch/mn10300/mm/dma-alloc.c
+++ b/arch/mn10300/mm/dma-alloc.c
@ -15,6 +15,7 @@
 #include <linux/string.h>
 #include <linux/pci.h>
 #include <linux/gfp.h>
+#include <linux/export.h>
 #include <asm/io.h>

 static unsigned long pci_sram_allocated = 0xbc000000;
--- a/arch/mn10300/unit-asb2303/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2303/include/unit/timex.h
@ -11,10 +11,6 @@
 #ifndef _ASM_UNIT_TIMEX_H
 #define _ASM_UNIT_TIMEX_H

-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
 #include <asm/timer-regs.h>
 #include <unit/clock.h>
 #include <asm/param.h>
--- a/arch/mn10300/unit-asb2303/smc91111.c
+++ b/arch/mn10300/unit-asb2303/smc91111.c
@ -15,6 +15,7 @@
 #include <linux/platform_device.h>

 #include <asm/io.h>
+#include <asm/irq.h>
 #include <asm/timex.h>
 #include <asm/processor.h>
 #include <asm/intctl-regs.h>
--- a/arch/mn10300/unit-asb2305/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2305/include/unit/timex.h
@ -11,10 +11,6 @@
 #ifndef _ASM_UNIT_TIMEX_H
 #define _ASM_UNIT_TIMEX_H

-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
 #include <asm/timer-regs.h>
 #include <unit/clock.h>
 #include <asm/param.h>
--- a/arch/mn10300/unit-asb2305/unit-init.c
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <asm/io.h>
+#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/processor.h>
 #include <asm/intctl-regs.h>
--- a/arch/mn10300/unit-asb2364/include/unit/timex.h
+++ b/arch/mn10300/unit-asb2364/include/unit/timex.h
@ -11,10 +11,6 @@
 #ifndef _ASM_UNIT_TIMEX_H
 #define _ASM_UNIT_TIMEX_H

-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
 #include <asm/timer-regs.h>
 #include <unit/clock.h>
 #include <asm/param.h>
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@ -86,8 +86,8 @@ static inline bool arch_irqs_disabled(void)
 }

 #ifdef CONFIG_PPC_BOOK3E
-#define __hard_irq_enable()	asm volatile("wrteei 1" : : : "memory");
-#define __hard_irq_disable()	asm volatile("wrteei 0" : : : "memory");
+#define __hard_irq_enable()	asm volatile("wrteei 1" : : : "memory")
+#define __hard_irq_disable()	asm volatile("wrteei 0" : : : "memory")
 #else
 #define __hard_irq_enable()	__mtmsrd(local_paca->kernel_msr | MSR_EE, 1)
 #define __hard_irq_disable()	__mtmsrd(local_paca->kernel_msr, 1)
@ -125,6 +125,8 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs)
 	return !regs->softe;
 }

+extern bool prep_irq_for_idle(void);
+
 #else /* CONFIG_PPC64 */

 #define SET_MSR_EE(x)	mtmsr(x)
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@ -229,7 +229,7 @@ notrace void arch_local_irq_restore(unsigned long en)
 	 */
 	if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
 		__hard_irq_disable();
-#ifdef CONFIG_TRACE_IRQFLAG
+#ifdef CONFIG_TRACE_IRQFLAGS
 	else {
 		/*
 		 * We should already be hard disabled here. We had bugs
@ -286,6 +286,52 @@ void notrace restore_interrupts(void)
 		__hard_irq_enable();
 }

+/*
+ * This is a helper to use when about to go into idle low-power
+ * when the latter has the side effect of re-enabling interrupts
+ * (such as calling H_CEDE under pHyp).
+ *
+ * You call this function with interrupts soft-disabled (this is
+ * already the case when ppc_md.power_save is called). The function
+ * will return whether to enter power save or just return.
+ *
+ * In the former case, it will have notified lockdep of interrupts
+ * being re-enabled and generally sanitized the lazy irq state,
+ * and in the latter case it will leave with interrupts hard
+ * disabled and marked as such, so the local_irq_enable() call
+ * in cpu_idle() will properly re-enable everything.
+ */
+bool prep_irq_for_idle(void)
+{
+	/*
+	 * First we need to hard disable to ensure no interrupt
+	 * occurs before we effectively enter the low power state
+	 */
+	hard_irq_disable();
+
+	/*
+	 * If anything happened while we were soft-disabled,
+	 * we return now and do not enter the low power state.
+	 */
+	if (lazy_irq_pending())
+		return false;
+
+	/* Tell lockdep we are about to re-enable */
+	trace_hardirqs_on();
+
+	/*
+	 * Mark interrupts as soft-enabled and clear the
+	 * PACA_IRQ_HARD_DIS from the pending mask since we
+	 * are about to hard enable as well as a side effect
+	 * of entering the low power state.
+	 */
+	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+	local_paca->soft_enabled = 1;
+
+	/* Tell the caller to enter the low power state */
+	return true;
+}
+
 #endif /* CONFIG_PPC64 */

 int arch_show_interrupts(struct seq_file *p, int prec)
--- a/arch/powerpc/kvm/book3s_pr_papr.c
+++ b/arch/powerpc/kvm/book3s_pr_papr.c
@ -241,6 +241,7 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd)
 	case H_PUT_TCE:
 		return kvmppc_h_pr_put_tce(vcpu);
 	case H_CEDE:
+		vcpu->arch.shared->msr |= MSR_EE;
 		kvm_vcpu_block(vcpu);
 		clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
 		vcpu->stat.halt_wakeup++;
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@ -639,7 +639,7 @@ static void __init parse_drconf_memory(struct device_node *memory)
 	unsigned int n, rc, ranges, is_kexec_kdump = 0;
 	unsigned long lmb_size, base, size, sz;
 	int nid;
-	struct assoc_arrays aa;
+	struct assoc_arrays aa = { .arrays = NULL };

 	n = of_get_drconf_memory(memory, &dm);
 	if (!n)
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@ -42,11 +42,9 @@ static void cbe_power_save(void)
 {
 	unsigned long ctrl, thread_switch_control;

-	/*
-	 * We need to hard disable interrupts, the local_irq_enable() done by
-	 * our caller upon return will hard re-enable.
-	 */
-	hard_irq_disable();
+	/* Ensure our interrupt state is properly tracked */
+	if (!prep_irq_for_idle())
+		return;

 	ctrl = mfspr(SPRN_CTRLF);

@ -81,6 +79,9 @@ static void cbe_power_save(void)
 	 */
 	ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
 	mtspr(SPRN_CTRLT, ctrl);
+
+	/* Re-enable interrupts in MSR */
+	__hard_irq_enable();
 }

 static int cbe_system_reset_exception(struct pt_regs *regs)
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@ -99,15 +99,18 @@ out:
 static void check_and_cede_processor(void)
 {
 	/*
-	 * Interrupts are soft-disabled at this point,
-	 * but not hard disabled. So an interrupt might have
-	 * occurred before entering NAP, and would be potentially
-	 * lost (edge events, decrementer events, etc...) unless
-	 * we first hard disable then check.
+	 * Ensure our interrupt state is properly tracked,
+	 * also checks if no interrupt has occurred while we
+	 * were soft-disabled
 	 */
-	hard_irq_disable();
-	if (!lazy_irq_pending())
+	if (prep_irq_for_idle()) {
 		cede_processor();
+#ifdef CONFIG_TRACE_IRQFLAGS
+		/* Ensure that H_CEDE returns with IRQs on */
+		if (WARN_ON(!(mfmsr() & MSR_EE)))
+			__hard_irq_enable();
+#endif
+	}
 }

 static int dedicated_cede_loop(struct cpuidle_device *dev,
--- a/arch/sh/include/asm/io_noioport.h
+++ b/arch/sh/include/asm/io_noioport.h
@ -19,9 +19,20 @@ static inline u32 inl(unsigned long addr)
 	return -1;
 }

-#define outb(x, y)	BUG()
-#define outw(x, y)	BUG()
-#define outl(x, y)	BUG()
+static inline void outb(unsigned char x, unsigned long port)
+{
+	BUG();
+}
+
+static inline void outw(unsigned short x, unsigned long port)
+{
+	BUG();
+}
+
+static inline void outl(unsigned int x, unsigned long port)
+{
+	BUG();
+}

 #define inb_p(addr)	inb(addr)
 #define inw_p(addr)	inw(addr)
--- a/arch/sh/kernel/cpu/sh3/serial-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/serial-sh7720.c
@ -2,7 +2,7 @@
 #include <linux/serial_core.h>
 #include <linux/io.h>
 #include <cpu/serial.h>
-#include <asm/gpio.h>
+#include <cpu/gpio.h>

 static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
 {
--- a/arch/tile/kernel/backtrace.c
+++ b/arch/tile/kernel/backtrace.c
@ -14,6 +14,7 @@

 #include <linux/kernel.h>
 #include <linux/string.h>
+#include <asm/byteorder.h>
 #include <asm/backtrace.h>
 #include <asm/tile-desc.h>
 #include <arch/abi.h>
@ -336,8 +337,12 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location,
 				bytes_to_prefetch / sizeof(tile_bundle_bits);
 		}

-		/* Decode the next bundle. */
-		bundle.bits = prefetched_bundles[next_bundle++];
+		/*
+		 * Decode the next bundle.
+		 * TILE always stores instruction bundles in little-endian
+		 * mode, even when the chip is running in big-endian mode.
+		 */
+		bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]);
 		bundle.num_insns =
 			parse_insn_tile(bundle.bits, pc, bundle.insns);
 		num_info_ops = bt_get_info_ops(&bundle, info_operands);
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@ -705,7 +705,6 @@ static void stack_proc(void *arg)
 	struct task_struct *from = current, *to = arg;

 	to->thread.saved_task = from;
-	rcu_switch_from(from);
 	switch_to(from, to, from);
 }

--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@ -139,6 +139,19 @@ static int addr_to_vsyscall_nr(unsigned long addr)
 	return nr;
 }

+#ifdef CONFIG_SECCOMP
+static int vsyscall_seccomp(struct task_struct *tsk, int syscall_nr)
+{
+	if (!seccomp_mode(&tsk->seccomp))
+		return 0;
+	task_pt_regs(tsk)->orig_ax = syscall_nr;
+	task_pt_regs(tsk)->ax = syscall_nr;
+	return __secure_computing(syscall_nr);
+}
+#else
+#define vsyscall_seccomp(_tsk, _nr) 0
+#endif
+
 static bool write_ok_or_segv(unsigned long ptr, size_t size)
 {
 	/*
@ -174,6 +187,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 	int vsyscall_nr;
 	int prev_sig_on_uaccess_error;
 	long ret;
+	int skip;

 	/*
 	 * No point in checking CS -- the only way to get here is a user mode
@ -205,9 +219,6 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 	}

 	tsk = current;
-	if (seccomp_mode(&tsk->seccomp))
-		do_exit(SIGKILL);
-
 	/*
 	 * With a real vsyscall, page faults cause SIGSEGV.  We want to
 	 * preserve that behavior to make writing exploits harder.
@ -222,8 +233,13 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 	 * address 0".
 	 */
 	ret = -EFAULT;
+	skip = 0;
 	switch (vsyscall_nr) {
 	case 0:
+		skip = vsyscall_seccomp(tsk, __NR_gettimeofday);
+		if (skip)
+			break;
+
 		if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
 		    !write_ok_or_segv(regs->si, sizeof(struct timezone)))
 			break;
@ -234,6 +250,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 		break;

 	case 1:
+		skip = vsyscall_seccomp(tsk, __NR_time);
+		if (skip)
+			break;
+
 		if (!write_ok_or_segv(regs->di, sizeof(time_t)))
 			break;

@ -241,6 +261,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 		break;

 	case 2:
+		skip = vsyscall_seccomp(tsk, __NR_getcpu);
+		if (skip)
+			break;
+
 		if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
 		    !write_ok_or_segv(regs->si, sizeof(unsigned)))
 			break;
@ -253,6 +277,12 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)

 	current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;

+	if (skip) {
+		if ((long)regs->ax <= 0L) /* seccomp errno emulation */
+			goto do_ret;
+		goto done; /* seccomp trace/trap */
+	}
+
 	if (ret == -EFAULT) {
 		/* Bad news -- userspace fed a bad pointer to a vsyscall. */
 		warn_bad_vsyscall(KERN_INFO, regs,
@ -271,10 +301,11 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)

 	regs->ax = ret;

+do_ret:
 	/* Emulate a ret instruction. */
 	regs->ip = caller;
 	regs->sp += 8;
-
+done:
 	return true;

 sigsegv:
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@ -3934,6 +3934,9 @@ static void kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm,
 {
 	struct kvm_mmu_page *page;

+	if (list_empty(&kvm->arch.active_mmu_pages))
+		return;
+
 	page = container_of(kvm->arch.active_mmu_pages.prev,
 			    struct kvm_mmu_page, link);
 	kvm_mmu_prepare_zap_page(kvm, page, invalid_list);
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@ -277,7 +277,7 @@ void xtensa_elf_core_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs)

 	/* Don't leak any random bits. */

-	memset(elfregs, 0, sizeof (elfregs));
+	memset(elfregs, 0, sizeof(*elfregs));

 	/* Note:  PS.EXCM is not set while user task is running; its
 	 * being set in regs->ps is for exception handling convenience.
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@ -95,18 +95,6 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags)
 		return_ACPI_STATUS(status);
 	}

-	if (sleep_state != ACPI_STATE_S5) {
-		/*
-		 * Disable BM arbitration. This feature is contained within an
-		 * optional register (PM2 Control), so ignore a BAD_ADDRESS
-		 * exception.
-		 */
-		status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
-		if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
 	/*
 	 * 1) Disable/Clear all GPEs
 	 * 2) Enable all wakeup GPEs
@ -364,16 +352,6 @@ acpi_status acpi_hw_legacy_wake(u8 sleep_state, u8 flags)
 				    [ACPI_EVENT_POWER_BUTTON].
 				    status_register_id, ACPI_CLEAR_STATUS);

-	/*
-	 * Enable BM arbitration. This feature is contained within an
-	 * optional register (PM2 Control), so ignore a BAD_ADDRESS
-	 * exception.
-	 */
-	status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
-	if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
-		return_ACPI_STATUS(status);
-	}
-
 	acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
 	return_ACPI_STATUS(status);
 }
--- a/drivers/acpi/acpica/nspredef.c
+++ b/drivers/acpi/acpica/nspredef.c
@ -638,7 +638,7 @@ acpi_ns_check_package(struct acpi_predefined_data *data,
 			/* Create the new outer package and populate it */

 			status =
-			    acpi_ns_wrap_with_package(data, *elements,
+			    acpi_ns_wrap_with_package(data, return_object,
 						      return_object_ptr);
 			if (ACPI_FAILURE(status)) {
 				return (status);
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@ -189,10 +189,12 @@ int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
 		 *     Processor (CPU3, 0x03, 0x00000410, 0x06) {}
 		 * }
 		 *
-		 * Ignores apic_id and always return 0 for CPU0's handle.
+		 * Ignores apic_id and always returns 0 for the processor
+		 * handle with acpi id 0 if nr_cpu_ids is 1.
+		 * This should be the case if SMP tables are not found.
 		 * Return -1 for other CPU's handle.
 		 */
-		if (acpi_id == 0)
+		if (nr_cpu_ids <= 1 && acpi_id == 0)
 			return acpi_id;
 		else
 			return apic_id;
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@ -1597,14 +1597,12 @@ static int loop_add(struct loop_device **l, int i)
 	struct gendisk *disk;
 	int err;

-	lo = kzalloc(sizeof(*lo), GFP_KERNEL);
-	if (!lo) {
 	err = -ENOMEM;
+	lo = kzalloc(sizeof(*lo), GFP_KERNEL);
+	if (!lo)
 		goto out;
-	}

-	err = idr_pre_get(&loop_index_idr, GFP_KERNEL);
-	if (err < 0)
+	if (!idr_pre_get(&loop_index_idr, GFP_KERNEL))
 		goto out_free_dev;

 	if (i >= 0) {
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@ -136,7 +136,7 @@ config GPIO_MPC8XXX

 config GPIO_MSM_V1
 	tristate "Qualcomm MSM GPIO v1"
-	depends on GPIOLIB && ARCH_MSM
+	depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
 	help
 	  Say yes here to support the GPIO interface on ARM v6 based
 	  Qualcomm MSM chips.  Most of the pins on the MSM can be
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@ -98,6 +98,7 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio,

 	return 0;
 }
+EXPORT_SYMBOL(devm_gpio_request_one);

 /**
 *      devm_gpio_free - free an interrupt
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@ -398,10 +398,12 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 	writel(~0, port->base + GPIO_ISR);

 	if (mxc_gpio_hwtype == IMX21_GPIO) {
-		/* setup one handler for all GPIO interrupts */
-		if (pdev->id == 0)
-			irq_set_chained_handler(port->irq,
-						mx2_gpio_irq_handler);
+		/*
+		 * Setup one handler for all GPIO interrupts. Actually setting
+		 * the handler is needed only once, but doing it for every port
+		 * is more robust and easier.
+		 */
+		irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
 	} else {
 		/* setup one handler for each entry */
 		irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@ -174,12 +174,22 @@ static inline void _gpio_dbck_enable(struct gpio_bank *bank)
 	if (bank->dbck_enable_mask && !bank->dbck_enabled) {
 		clk_enable(bank->dbck);
 		bank->dbck_enabled = true;
+
+		__raw_writel(bank->dbck_enable_mask,
+			     bank->base + bank->regs->debounce_en);
 	}
 }

 static inline void _gpio_dbck_disable(struct gpio_bank *bank)
 {
 	if (bank->dbck_enable_mask && bank->dbck_enabled) {
+		/*
+		 * Disable debounce before cutting it's clock. If debounce is
+		 * enabled but the clock is not, GPIO module seems to be unable
+		 * to detect events and generate interrupts at least on OMAP3.
+		 */
+		__raw_writel(0, bank->base + bank->regs->debounce_en);
+
 		clk_disable(bank->dbck);
 		bank->dbck_enabled = false;
 	}
@ -1081,7 +1091,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
 	bank->is_mpuio = pdata->is_mpuio;
 	bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
 	bank->loses_context = pdata->loses_context;
-	bank->get_context_loss_count = pdata->get_context_loss_count;
 	bank->regs = pdata->regs;
 #ifdef CONFIG_OF_GPIO
 	bank->chip.of_node = of_node_get(node);
@ -1135,6 +1144,9 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
 	omap_gpio_chip_init(bank);
 	omap_gpio_show_rev(bank);

+	if (bank->loses_context)
+		bank->get_context_loss_count = pdata->get_context_loss_count;
+
 	pm_runtime_put(bank->dev);

 	list_add_tail(&bank->node, &omap_gpio_list);
--- a/drivers/gpio/gpio-sta2x11.c
+++ b/drivers/gpio/gpio-sta2x11.c
@ -383,6 +383,7 @@ static int __devinit gsta_probe(struct platform_device *dev)
 	}
 	spin_lock_init(&chip->lock);
 	gsta_gpio_setup(chip);
+	if (gpio_pdata)
 		for (i = 0; i < GSTA_NR_GPIO; i++)
 			gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);

--- a/drivers/gpio/gpio-tps65910.c
+++ b/drivers/gpio/gpio-tps65910.c
@ -149,6 +149,9 @@ static int __devinit tps65910_gpio_probe(struct platform_device *pdev)
 	tps65910_gpio->gpio_chip.set	= tps65910_gpio_set;
 	tps65910_gpio->gpio_chip.get	= tps65910_gpio_get;
 	tps65910_gpio->gpio_chip.dev = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+	tps65910_gpio->gpio_chip.of_node = tps65910->dev->of_node;
+#endif
 	if (pdata && pdata->gpio_base)
 		tps65910_gpio->gpio_chip.base = pdata->gpio_base;
 	else
--- a/drivers/gpio/gpio-wm8994.c
+++ b/drivers/gpio/gpio-wm8994.c
@ -89,8 +89,11 @@ static int wm8994_gpio_direction_out(struct gpio_chip *chip,
 	struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip);
 	struct wm8994 *wm8994 = wm8994_gpio->wm8994;

+	if (value)
+		value = WM8994_GPN_LVL;
+
 	return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
-			       WM8994_GPN_DIR, 0);
+			       WM8994_GPN_DIR | WM8994_GPN_LVL, value);
 }

 static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
--- a/drivers/gpu/drm/gma500/cdv_device.c
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@ -78,21 +78,6 @@ static int cdv_backlight_combination_mode(struct drm_device *dev)
 	return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE;
 }

-static int cdv_get_brightness(struct backlight_device *bd)
-{
-	struct drm_device *dev = bl_get_data(bd);
-	u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
-
-	if (cdv_backlight_combination_mode(dev)) {
-		u8 lbpc;
-
-		val &= ~1;
-		pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
-		val *= lbpc;
-	}
-	return val;
-}
-
 static u32 cdv_get_max_backlight(struct drm_device *dev)
 {
 	u32 max = REG_READ(BLC_PWM_CTL);
@ -110,6 +95,22 @@ static u32 cdv_get_max_backlight(struct drm_device *dev)
 	return max;
 }

+static int cdv_get_brightness(struct backlight_device *bd)
+{
+	struct drm_device *dev = bl_get_data(bd);
+	u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
+
+	if (cdv_backlight_combination_mode(dev)) {
+		u8 lbpc;
+
+		val &= ~1;
+		pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
+		val *= lbpc;
+	}
+	return (val * 100)/cdv_get_max_backlight(dev);
+
+}
+
 static int cdv_set_brightness(struct backlight_device *bd)
 {
 	struct drm_device *dev = bl_get_data(bd);
@ -120,6 +121,9 @@ static int cdv_set_brightness(struct backlight_device *bd)
 	if (level < 1)
 		level = 1;

+	level *= cdv_get_max_backlight(dev);
+	level /= 100;
+
 	if (cdv_backlight_combination_mode(dev)) {
 		u32 max = cdv_get_max_backlight(dev);
 		u8 lbpc;
@ -157,7 +161,6 @@ static int cdv_backlight_init(struct drm_device *dev)

 	cdv_backlight_device->props.brightness =
 			cdv_get_brightness(cdv_backlight_device);
-	cdv_backlight_device->props.max_brightness = cdv_get_max_backlight(dev);
 	backlight_update_status(cdv_backlight_device);
 	dev_priv->backlight_device = cdv_backlight_device;
 	return 0;
--- a/drivers/gpu/drm/gma500/opregion.c
+++ b/drivers/gpu/drm/gma500/opregion.c
@ -144,6 +144,8 @@ struct opregion_asle {

 #define ASLE_CBLV_VALID         (1<<31)

+static struct psb_intel_opregion *system_opregion;
+
 static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
@ -205,7 +207,7 @@ void psb_intel_opregion_enable_asle(struct drm_device *dev)
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	struct opregion_asle *asle = dev_priv->opregion.asle;

-	if (asle) {
+	if (asle && system_opregion ) {
 		/* Don't do this on Medfield or other non PC like devices, they
 		   use the bit for something different altogether */
 		psb_enable_pipestat(dev_priv, 0, PIPE_LEGACY_BLC_EVENT_ENABLE);
@ -221,7 +223,6 @@ void psb_intel_opregion_enable_asle(struct drm_device *dev)
 #define ACPI_EV_LID            (1<<1)
 #define ACPI_EV_DOCK           (1<<2)

-static struct psb_intel_opregion *system_opregion;

 static int psb_intel_opregion_video_event(struct notifier_block *nb,
 					  unsigned long val, void *data)
@ -266,9 +267,6 @@ void psb_intel_opregion_init(struct drm_device *dev)
 		system_opregion = opregion;
 		register_acpi_notifier(&psb_intel_opregion_notifier);
 	}
-
-	if (opregion->asle)
-		psb_intel_opregion_enable_asle(dev);
 }

 void psb_intel_opregion_fini(struct drm_device *dev)
--- a/drivers/gpu/drm/gma500/opregion.h
+++ b/drivers/gpu/drm/gma500/opregion.h
@ -27,6 +27,7 @@ extern void psb_intel_opregion_asle_intr(struct drm_device *dev);
 extern void psb_intel_opregion_init(struct drm_device *dev);
 extern void psb_intel_opregion_fini(struct drm_device *dev);
 extern int psb_intel_opregion_setup(struct drm_device *dev);
+extern void psb_intel_opregion_enable_asle(struct drm_device *dev);

 #else

@ -46,4 +47,8 @@ extern inline int psb_intel_opregion_setup(struct drm_device *dev)
 {
 	return 0;
 }
+
+extern inline void psb_intel_opregion_enable_asle(struct drm_device *dev)
+{
+}
 #endif
--- a/drivers/gpu/drm/gma500/psb_device.c
+++ b/drivers/gpu/drm/gma500/psb_device.c
@ -144,6 +144,10 @@ static int psb_backlight_init(struct drm_device *dev)
 	psb_backlight_device->props.max_brightness = 100;
 	backlight_update_status(psb_backlight_device);
 	dev_priv->backlight_device = psb_backlight_device;
+
+	/* This must occur after the backlight is properly initialised */
+	psb_lid_timer_init(dev_priv);
+
 	return 0;
 }

@ -354,13 +358,6 @@ static int psb_chip_setup(struct drm_device *dev)
 	return 0;
 }

-/* Not exactly an erratum more an irritation */
-static void psb_chip_errata(struct drm_device *dev)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	psb_lid_timer_init(dev_priv);
-}
-
 static void psb_chip_teardown(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
@ -379,7 +376,6 @@ const struct psb_ops psb_chip_ops = {
 	.sgx_offset = PSB_SGX_OFFSET,
 	.chip_setup = psb_chip_setup,
 	.chip_teardown = psb_chip_teardown,
-	.errata = psb_chip_errata,

 	.crtc_helper = &psb_intel_helper_funcs,
 	.crtc_funcs = &psb_intel_crtc_funcs,
--- a/drivers/gpu/drm/gma500/psb_drv.c
+++ b/drivers/gpu/drm/gma500/psb_drv.c
@ -374,6 +374,7 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset)

 	if (ret)
 		return ret;
+	psb_intel_opregion_enable_asle(dev);
 #if 0
 	/*enable runtime pm at last*/
 	pm_runtime_enable(&dev->pdev->dev);
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@ -517,6 +517,12 @@ static const struct hid_device_id apple_devices[] = {
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
 		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
+		.driver_data = APPLE_HAS_FN },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@ -1503,6 +1503,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@ -1995,6 +1998,7 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
@ -2089,6 +2093,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ }
--- a/Показать больше
+++ b/Показать больше