ASoC: rt5682: Avoid the unexpected IRQ event during going to suspend

When the system suspends, the codec driver will set SAR to
power saving mode if a headset is plugged in.
There is a chance to generate an unexpected IRQ, and leads to
issues after resuming such as noise from OMTP type headsets.

Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211109095450.12950-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/rt5682.c

@@ -48,6 +48,7 @@ static const struct reg_sequence patch_list[] = {
 	{RT5682_SAR_IL_CMD_6, 0x0110},
 	{RT5682_CHARGE_PUMP_1, 0x0210},
 	{RT5682_HP_LOGIC_CTRL_2, 0x0007},
+	{RT5682_SAR_IL_CMD_2, 0xac00},
 };
 
 void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev)
@@ -2943,9 +2944,6 @@ static int rt5682_suspend(struct snd_soc_component *component)
 	cancel_delayed_work_sync(&rt5682->jack_detect_work);
 	cancel_delayed_work_sync(&rt5682->jd_check_work);
 	if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) {
-		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
-			RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK,
-			RT5682_CTRL_MB1_REG | RT5682_CTRL_MB2_REG);
 		val = snd_soc_component_read(component,
 				RT5682_CBJ_CTRL_2) & RT5682_JACK_TYPE_MASK;
 
@@ -2967,10 +2965,15 @@ static int rt5682_suspend(struct snd_soc_component *component)
 		/* enter SAR ADC power saving mode */
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
 			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK |
-			RT5682_SAR_BUTDET_RST_MASK | RT5682_SAR_SEL_MB1_MB2_MASK, 0);
+			RT5682_SAR_SEL_MB1_MB2_MASK, 0);
+		usleep_range(5000, 6000);
+		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
+			RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK,
+			RT5682_CTRL_MB1_REG | RT5682_CTRL_MB2_REG);
+		usleep_range(10000, 12000);
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
-			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_BUTDET_RST_MASK,
-			RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV | RT5682_SAR_BUTDET_RST_NORMAL);
+			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK,
+			RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV);
 	}
 
 	regcache_cache_only(rt5682->regmap, true);