rtc: pcf8563: add CLKOUT to common clock framework
Add the clkout output clk to the common clock framework. Disable the CLKOUT of the RTC after power-up. After power-up/reset of the RTC, CLKOUT is enabled by default, with CLKOUT enabled the RTC chip has 2-3 times higher power consumption. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
Heiko Schocher
Alexandre Belloni
Родитель
dbb812b141
Коммит
a39a6405d5
|
|
@ -0,0 +1,25 @@
|
|||
* Philips PCF8563/Epson RTC8564 Real Time Clock
|
||||
|
||||
Philips PCF8563/Epson RTC8564 Real Time Clock
|
||||
|
||||
Required properties:
|
||||
see: Documentation/devicetree/bindings/i2c/trivial-devices.txt
|
||||
|
||||
Optional property:
|
||||
- #clock-cells: Should be 0.
|
||||
- clock-output-names:
|
||||
overwrite the default clock name "pcf8563-clkout"
|
||||
|
||||
Example:
|
||||
|
||||
pcf8563: pcf8563@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
device {
|
||||
...
|
||||
clocks = <&pcf8563>;
|
||||
...
|
||||
};
|
||||
|
|
@ -14,6 +14,7 @@
|
|||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/clk-provider.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/bcd.h>
|
||||
#include <linux/rtc.h>
|
||||
|
|
@ -41,6 +42,13 @@
|
|||
#define PCF8563_REG_AMN 0x09 /* alarm */
|
||||
|
||||
#define PCF8563_REG_CLKO 0x0D /* clock out */
|
||||
#define PCF8563_REG_CLKO_FE 0x80 /* clock out enabled */
|
||||
#define PCF8563_REG_CLKO_F_MASK 0x03 /* frequenc mask */
|
||||
#define PCF8563_REG_CLKO_F_32768HZ 0x00
|
||||
#define PCF8563_REG_CLKO_F_1024HZ 0x01
|
||||
#define PCF8563_REG_CLKO_F_32HZ 0x02
|
||||
#define PCF8563_REG_CLKO_F_1HZ 0x03
|
||||
|
||||
#define PCF8563_REG_TMRC 0x0E /* timer control */
|
||||
#define PCF8563_TMRC_ENABLE BIT(7)
|
||||
#define PCF8563_TMRC_4096 0
|
||||
|
|
@ -76,6 +84,9 @@ struct pcf8563 {
|
|||
int voltage_low; /* incicates if a low_voltage was detected */
|
||||
|
||||
struct i2c_client *client;
|
||||
#ifdef CONFIG_COMMON_CLK
|
||||
struct clk_hw clkout_hw;
|
||||
#endif
|
||||
};
|
||||
|
||||
static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg,
|
||||
|
|
@ -390,6 +401,158 @@ static int pcf8563_irq_enable(struct device *dev, unsigned int enabled)
|
|||
return pcf8563_set_alarm_mode(to_i2c_client(dev), !!enabled);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_COMMON_CLK
|
||||
/*
|
||||
* Handling of the clkout
|
||||
*/
|
||||
|
||||
#define clkout_hw_to_pcf8563(_hw) container_of(_hw, struct pcf8563, clkout_hw)
|
||||
|
||||
static int clkout_rates[] = {
|
||||
32768,
|
||||
1024,
|
||||
32,
|
||||
1,
|
||||
};
|
||||
|
||||
static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw,
|
||||
unsigned long parent_rate)
|
||||
{
|
||||
struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
|
||||
struct i2c_client *client = pcf8563->client;
|
||||
unsigned char buf;
|
||||
int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
|
||||
|
||||
if (ret < 0)
|
||||
return 0;
|
||||
|
||||
buf &= PCF8563_REG_CLKO_F_MASK;
|
||||
return clkout_rates[ret];
|
||||
}
|
||||
|
||||
static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
|
||||
unsigned long *prate)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
|
||||
if (clkout_rates[i] <= rate)
|
||||
return clkout_rates[i];
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
|
||||
unsigned long parent_rate)
|
||||
{
|
||||
struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
|
||||
struct i2c_client *client = pcf8563->client;
|
||||
unsigned char buf;
|
||||
int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
|
||||
int i;
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
|
||||
if (clkout_rates[i] == rate) {
|
||||
buf &= ~PCF8563_REG_CLKO_F_MASK;
|
||||
buf |= i;
|
||||
ret = pcf8563_write_block_data(client,
|
||||
PCF8563_REG_CLKO, 1,
|
||||
&buf);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int pcf8563_clkout_control(struct clk_hw *hw, bool enable)
|
||||
{
|
||||
struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
|
||||
struct i2c_client *client = pcf8563->client;
|
||||
unsigned char buf;
|
||||
int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (enable)
|
||||
buf |= PCF8563_REG_CLKO_FE;
|
||||
else
|
||||
buf &= ~PCF8563_REG_CLKO_FE;
|
||||
|
||||
ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int pcf8563_clkout_prepare(struct clk_hw *hw)
|
||||
{
|
||||
return pcf8563_clkout_control(hw, 1);
|
||||
}
|
||||
|
||||
static void pcf8563_clkout_unprepare(struct clk_hw *hw)
|
||||
{
|
||||
pcf8563_clkout_control(hw, 0);
|
||||
}
|
||||
|
||||
static int pcf8563_clkout_is_prepared(struct clk_hw *hw)
|
||||
{
|
||||
struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
|
||||
struct i2c_client *client = pcf8563->client;
|
||||
unsigned char buf;
|
||||
int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return !!(buf & PCF8563_REG_CLKO_FE);
|
||||
}
|
||||
|
||||
static const struct clk_ops pcf8563_clkout_ops = {
|
||||
.prepare = pcf8563_clkout_prepare,
|
||||
.unprepare = pcf8563_clkout_unprepare,
|
||||
.is_prepared = pcf8563_clkout_is_prepared,
|
||||
.recalc_rate = pcf8563_clkout_recalc_rate,
|
||||
.round_rate = pcf8563_clkout_round_rate,
|
||||
.set_rate = pcf8563_clkout_set_rate,
|
||||
};
|
||||
|
||||
static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563)
|
||||
{
|
||||
struct i2c_client *client = pcf8563->client;
|
||||
struct device_node *node = client->dev.of_node;
|
||||
struct clk *clk;
|
||||
struct clk_init_data init;
|
||||
int ret;
|
||||
unsigned char buf;
|
||||
|
||||
/* disable the clkout output */
|
||||
buf = 0;
|
||||
ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
|
||||
if (ret < 0)
|
||||
return ERR_PTR(ret);
|
||||
|
||||
init.name = "pcf8563-clkout";
|
||||
init.ops = &pcf8563_clkout_ops;
|
||||
init.flags = CLK_IS_ROOT;
|
||||
init.parent_names = NULL;
|
||||
init.num_parents = 0;
|
||||
pcf8563->clkout_hw.init = &init;
|
||||
|
||||
/* optional override of the clockname */
|
||||
of_property_read_string(node, "clock-output-names", &init.name);
|
||||
|
||||
/* register the clock */
|
||||
clk = devm_clk_register(&client->dev, &pcf8563->clkout_hw);
|
||||
|
||||
if (!IS_ERR(clk))
|
||||
of_clk_add_provider(node, of_clk_src_simple_get, clk);
|
||||
|
||||
return clk;
|
||||
}
|
||||
#endif
|
||||
|
||||
static const struct rtc_class_ops pcf8563_rtc_ops = {
|
||||
.ioctl = pcf8563_rtc_ioctl,
|
||||
.read_time = pcf8563_rtc_read_time,
|
||||
|
|
@ -459,6 +622,11 @@ static int pcf8563_probe(struct i2c_client *client,
|
|||
|
||||
}
|
||||
|
||||
#ifdef CONFIG_COMMON_CLK
|
||||
/* register clk in common clk framework */
|
||||
pcf8563_clkout_register_clk(pcf8563);
|
||||
#endif
|
||||
|
||||
/* the pcf8563 alarm only supports a minute accuracy */
|
||||
pcf8563->rtc->uie_unsupported = 1;
|
||||
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче