[MIPS] SB1: Fix interrupt disable hazard.

The SB1 core has a three cycle interrupt disable hazard but we were
wrongly treating it as fully interlocked.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Ralf Baechle 2006-03-13 16:16:29 +00:00
Родитель 3a2f735700
Коммит a3c4946db4
1 изменённых файлов: 106 добавлений и 80 удалений

Просмотреть файл

@ -3,7 +3,9 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003, 2004 Ralf Baechle
* Copyright (C) 2003, 2004 Ralf Baechle <ralf@linux-mips.org>
* Copyright (C) MIPS Technologies, Inc.
* written by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef _ASM_HAZARDS_H
#define _ASM_HAZARDS_H
@ -74,8 +76,7 @@
#define irq_disable_hazard
_ehb
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
defined(CONFIG_CPU_SB1)
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@ -99,13 +100,13 @@
#else /* __ASSEMBLY__ */
__asm__(
" .macro _ssnop \n\t"
" sll $0, $0, 1 \n\t"
" .endm \n\t"
" \n\t"
" .macro _ehb \n\t"
" sll $0, $0, 3 \n\t"
" .endm \n\t");
" .macro _ssnop \n"
" sll $0, $0, 1 \n"
" .endm \n"
" \n"
" .macro _ehb \n"
" sll $0, $0, 3 \n"
" .endm \n");
#ifdef CONFIG_CPU_RM9000
@ -117,17 +118,21 @@ __asm__(
#define mtc0_tlbw_hazard() \
__asm__ __volatile__( \
".set\tmips32\n\t" \
"_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
".set\tmips0")
" .set mips32 \n" \
" _ssnop \n" \
" _ssnop \n" \
" _ssnop \n" \
" _ssnop \n" \
" .set mips0 \n")
#define tlbw_use_hazard() \
__asm__ __volatile__( \
".set\tmips32\n\t" \
"_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
".set\tmips0")
#define back_to_back_c0_hazard() do { } while (0)
" .set mips32 \n" \
" _ssnop \n" \
" _ssnop \n" \
" _ssnop \n" \
" _ssnop \n" \
" .set mips0 \n")
#else
@ -136,15 +141,25 @@ __asm__(
*/
#define mtc0_tlbw_hazard() \
__asm__ __volatile__( \
".set noreorder\n\t" \
"nop; nop; nop; nop; nop; nop;\n\t" \
".set reorder\n\t")
" .set noreorder \n" \
" nop \n" \
" nop \n" \
" nop \n" \
" nop \n" \
" nop \n" \
" nop \n" \
" .set reorder \n")
#define tlbw_use_hazard() \
__asm__ __volatile__( \
".set noreorder\n\t" \
"nop; nop; nop; nop; nop; nop;\n\t" \
".set reorder\n\t")
" .set noreorder \n" \
" nop \n" \
" nop \n" \
" nop \n" \
" nop \n" \
" nop \n" \
" nop \n" \
" .set reorder \n")
#endif
@ -156,49 +171,26 @@ __asm__(
#ifdef CONFIG_CPU_MIPSR2
__asm__(
" .macro\tirq_enable_hazard \n\t"
" _ehb \n\t"
" .endm \n\t"
" \n\t"
" .macro\tirq_disable_hazard \n\t"
" _ehb \n\t"
" .endm \n\t"
" \n\t"
" .macro\tback_to_back_c0_hazard \n\t"
" _ehb \n\t"
" .endm");
__asm__(" .macro irq_enable_hazard \n"
" _ehb \n"
" .endm \n"
" \n"
" .macro irq_disable_hazard \n"
" _ehb \n"
" .endm \n");
#define irq_enable_hazard() \
__asm__ __volatile__( \
"irq_enable_hazard")
#define irq_disable_hazard() \
__asm__ __volatile__( \
"irq_disable_hazard")
#define back_to_back_c0_hazard() \
__asm__ __volatile__( \
"back_to_back_c0_hazard")
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
defined(CONFIG_CPU_SB1)
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
*/
__asm__(
" .macro\tirq_enable_hazard \n\t"
" .endm \n\t"
" \n\t"
" .macro\tirq_disable_hazard \n\t"
" .endm");
#define irq_enable_hazard() do { } while (0)
#define irq_disable_hazard() do { } while (0)
#define back_to_back_c0_hazard() do { } while (0)
" .macro irq_enable_hazard \n"
" .endm \n"
" \n"
" .macro irq_disable_hazard \n"
" .endm \n");
#else
@ -209,29 +201,63 @@ __asm__(
*/
__asm__(
" # \n\t"
" # There is a hazard but we do not care \n\t"
" # \n\t"
" .macro\tirq_enable_hazard \n\t"
" .endm \n\t"
" \n\t"
" .macro\tirq_disable_hazard \n\t"
" _ssnop; _ssnop; _ssnop \n\t"
" .endm");
#define irq_enable_hazard() do { } while (0)
#define irq_disable_hazard() \
__asm__ __volatile__( \
"irq_disable_hazard")
#define back_to_back_c0_hazard() \
__asm__ __volatile__( \
" .set noreorder \n" \
" nop; nop; nop \n" \
" .set reorder \n")
" # \n"
" # There is a hazard but we do not care \n"
" # \n"
" .macro\tirq_enable_hazard \n"
" .endm \n"
" \n"
" .macro\tirq_disable_hazard \n"
" _ssnop \n"
" _ssnop \n"
" _ssnop \n"
" .endm \n");
#endif
#define irq_enable_hazard() \
__asm__ __volatile__("irq_enable_hazard")
#define irq_disable_hazard() \
__asm__ __volatile__("irq_disable_hazard")
/*
* Back-to-back hazards -
*
* What is needed to separate a move to cp0 from a subsequent read from the
* same cp0 register?
*/
#ifdef CONFIG_CPU_MIPSR2
__asm__(" .macro back_to_back_c0_hazard \n"
" _ehb \n"
" .endm \n");
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
defined(CONFIG_CPU_SB1)
__asm__(" .macro back_to_back_c0_hazard \n"
" .endm \n");
#else
__asm__(" .macro back_to_back_c0_hazard \n"
" .set noreorder \n"
" _ssnop \n"
" _ssnop \n"
" _ssnop \n"
" .set reorder \n"
" .endm");
#endif
#define back_to_back_c0_hazard() \
__asm__ __volatile__("back_to_back_c0_hazard")
/*
* Instruction execution hazard
*/
#ifdef CONFIG_CPU_MIPSR2
/*
* gcc has a tradition of misscompiling the previous construct using the