clk: at91: add sam9x60 PLL driver
The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This commit is contained in:
Родитель
e5be537064
Коммит
a436c2a447
|
@ -14,6 +14,7 @@ obj-$(CONFIG_HAVE_AT91_SMD) += clk-smd.o
|
|||
obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o
|
||||
obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o
|
||||
obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o
|
||||
obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL) += clk-sam9x60-pll.o
|
||||
obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
|
||||
obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
|
||||
obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
|
||||
|
|
|
@ -0,0 +1,330 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2019 Microchip Technology Inc.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/clk-provider.h>
|
||||
#include <linux/clkdev.h>
|
||||
#include <linux/clk/at91_pmc.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/mfd/syscon.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#include "pmc.h"
|
||||
|
||||
#define PMC_PLL_CTRL0 0xc
|
||||
#define PMC_PLL_CTRL0_DIV_MSK GENMASK(7, 0)
|
||||
#define PMC_PLL_CTRL0_ENPLL BIT(28)
|
||||
#define PMC_PLL_CTRL0_ENPLLCK BIT(29)
|
||||
#define PMC_PLL_CTRL0_ENLOCK BIT(31)
|
||||
|
||||
#define PMC_PLL_CTRL1 0x10
|
||||
#define PMC_PLL_CTRL1_FRACR_MSK GENMASK(21, 0)
|
||||
#define PMC_PLL_CTRL1_MUL_MSK GENMASK(30, 24)
|
||||
|
||||
#define PMC_PLL_ACR 0x18
|
||||
#define PMC_PLL_ACR_DEFAULT 0x1b040010UL
|
||||
#define PMC_PLL_ACR_UTMIVR BIT(12)
|
||||
#define PMC_PLL_ACR_UTMIBG BIT(13)
|
||||
#define PMC_PLL_ACR_LOOP_FILTER_MSK GENMASK(31, 24)
|
||||
|
||||
#define PMC_PLL_UPDT 0x1c
|
||||
#define PMC_PLL_UPDT_UPDATE BIT(8)
|
||||
|
||||
#define PMC_PLL_ISR0 0xec
|
||||
|
||||
#define PLL_DIV_MAX (FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, UINT_MAX) + 1)
|
||||
#define UPLL_DIV 2
|
||||
#define PLL_MUL_MAX (FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1)
|
||||
|
||||
#define PLL_MAX_ID 1
|
||||
|
||||
struct sam9x60_pll {
|
||||
struct clk_hw hw;
|
||||
struct regmap *regmap;
|
||||
spinlock_t *lock;
|
||||
const struct clk_pll_characteristics *characteristics;
|
||||
u32 frac;
|
||||
u8 id;
|
||||
u8 div;
|
||||
u16 mul;
|
||||
};
|
||||
|
||||
#define to_sam9x60_pll(hw) container_of(hw, struct sam9x60_pll, hw)
|
||||
|
||||
static inline bool sam9x60_pll_ready(struct regmap *regmap, int id)
|
||||
{
|
||||
unsigned int status;
|
||||
|
||||
regmap_read(regmap, PMC_PLL_ISR0, &status);
|
||||
|
||||
return !!(status & BIT(id));
|
||||
}
|
||||
|
||||
static int sam9x60_pll_prepare(struct clk_hw *hw)
|
||||
{
|
||||
struct sam9x60_pll *pll = to_sam9x60_pll(hw);
|
||||
struct regmap *regmap = pll->regmap;
|
||||
unsigned long flags;
|
||||
u8 div;
|
||||
u16 mul;
|
||||
u32 val;
|
||||
|
||||
spin_lock_irqsave(pll->lock, flags);
|
||||
regmap_write(regmap, PMC_PLL_UPDT, pll->id);
|
||||
|
||||
regmap_read(regmap, PMC_PLL_CTRL0, &val);
|
||||
div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val);
|
||||
|
||||
regmap_read(regmap, PMC_PLL_CTRL1, &val);
|
||||
mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, val);
|
||||
|
||||
if (sam9x60_pll_ready(regmap, pll->id) &&
|
||||
(div == pll->div && mul == pll->mul)) {
|
||||
spin_unlock_irqrestore(pll->lock, flags);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Recommended value for PMC_PLL_ACR */
|
||||
val = PMC_PLL_ACR_DEFAULT;
|
||||
regmap_write(regmap, PMC_PLL_ACR, val);
|
||||
|
||||
regmap_write(regmap, PMC_PLL_CTRL1,
|
||||
FIELD_PREP(PMC_PLL_CTRL1_MUL_MSK, pll->mul));
|
||||
|
||||
if (pll->characteristics->upll) {
|
||||
/* Enable the UTMI internal bandgap */
|
||||
val |= PMC_PLL_ACR_UTMIBG;
|
||||
regmap_write(regmap, PMC_PLL_ACR, val);
|
||||
|
||||
udelay(10);
|
||||
|
||||
/* Enable the UTMI internal regulator */
|
||||
val |= PMC_PLL_ACR_UTMIVR;
|
||||
regmap_write(regmap, PMC_PLL_ACR, val);
|
||||
|
||||
udelay(10);
|
||||
}
|
||||
|
||||
regmap_update_bits(regmap, PMC_PLL_UPDT,
|
||||
PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
|
||||
|
||||
regmap_write(regmap, PMC_PLL_CTRL0,
|
||||
PMC_PLL_CTRL0_ENLOCK | PMC_PLL_CTRL0_ENPLL |
|
||||
PMC_PLL_CTRL0_ENPLLCK | pll->div);
|
||||
|
||||
regmap_update_bits(regmap, PMC_PLL_UPDT,
|
||||
PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
|
||||
|
||||
while (!sam9x60_pll_ready(regmap, pll->id))
|
||||
cpu_relax();
|
||||
|
||||
spin_unlock_irqrestore(pll->lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sam9x60_pll_is_prepared(struct clk_hw *hw)
|
||||
{
|
||||
struct sam9x60_pll *pll = to_sam9x60_pll(hw);
|
||||
|
||||
return sam9x60_pll_ready(pll->regmap, pll->id);
|
||||
}
|
||||
|
||||
static void sam9x60_pll_unprepare(struct clk_hw *hw)
|
||||
{
|
||||
struct sam9x60_pll *pll = to_sam9x60_pll(hw);
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(pll->lock, flags);
|
||||
|
||||
regmap_write(pll->regmap, PMC_PLL_UPDT, pll->id);
|
||||
|
||||
regmap_update_bits(pll->regmap, PMC_PLL_CTRL0,
|
||||
PMC_PLL_CTRL0_ENPLLCK, 0);
|
||||
|
||||
regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
|
||||
PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
|
||||
|
||||
regmap_update_bits(pll->regmap, PMC_PLL_CTRL0, PMC_PLL_CTRL0_ENPLL, 0);
|
||||
|
||||
if (pll->characteristics->upll)
|
||||
regmap_update_bits(pll->regmap, PMC_PLL_ACR,
|
||||
PMC_PLL_ACR_UTMIBG | PMC_PLL_ACR_UTMIVR, 0);
|
||||
|
||||
regmap_update_bits(pll->regmap, PMC_PLL_UPDT,
|
||||
PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE);
|
||||
|
||||
spin_unlock_irqrestore(pll->lock, flags);
|
||||
}
|
||||
|
||||
static unsigned long sam9x60_pll_recalc_rate(struct clk_hw *hw,
|
||||
unsigned long parent_rate)
|
||||
{
|
||||
struct sam9x60_pll *pll = to_sam9x60_pll(hw);
|
||||
|
||||
return (parent_rate * (pll->mul + 1)) / (pll->div + 1);
|
||||
}
|
||||
|
||||
static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll,
|
||||
unsigned long rate,
|
||||
unsigned long parent_rate,
|
||||
bool update)
|
||||
{
|
||||
const struct clk_pll_characteristics *characteristics =
|
||||
pll->characteristics;
|
||||
unsigned long bestremainder = ULONG_MAX;
|
||||
unsigned long maxdiv, mindiv, tmpdiv;
|
||||
long bestrate = -ERANGE;
|
||||
unsigned long bestdiv = 0;
|
||||
unsigned long bestmul = 0;
|
||||
unsigned long bestfrac = 0;
|
||||
|
||||
if (rate < characteristics->output[0].min ||
|
||||
rate > characteristics->output[0].max)
|
||||
return -ERANGE;
|
||||
|
||||
if (!pll->characteristics->upll) {
|
||||
mindiv = parent_rate / rate;
|
||||
if (mindiv < 2)
|
||||
mindiv = 2;
|
||||
|
||||
maxdiv = DIV_ROUND_UP(parent_rate * PLL_MUL_MAX, rate);
|
||||
if (maxdiv > PLL_DIV_MAX)
|
||||
maxdiv = PLL_DIV_MAX;
|
||||
} else {
|
||||
mindiv = maxdiv = UPLL_DIV;
|
||||
}
|
||||
|
||||
for (tmpdiv = mindiv; tmpdiv <= maxdiv; tmpdiv++) {
|
||||
unsigned long remainder;
|
||||
unsigned long tmprate;
|
||||
unsigned long tmpmul;
|
||||
unsigned long tmpfrac = 0;
|
||||
|
||||
/*
|
||||
* Calculate the multiplier associated with the current
|
||||
* divider that provide the closest rate to the requested one.
|
||||
*/
|
||||
tmpmul = mult_frac(rate, tmpdiv, parent_rate);
|
||||
tmprate = mult_frac(parent_rate, tmpmul, tmpdiv);
|
||||
remainder = rate - tmprate;
|
||||
|
||||
if (remainder) {
|
||||
tmpfrac = DIV_ROUND_CLOSEST_ULL((u64)remainder * tmpdiv * (1 << 22),
|
||||
parent_rate);
|
||||
|
||||
tmprate += DIV_ROUND_CLOSEST_ULL((u64)tmpfrac * parent_rate,
|
||||
tmpdiv * (1 << 22));
|
||||
|
||||
if (tmprate > rate)
|
||||
remainder = tmprate - rate;
|
||||
else
|
||||
remainder = rate - tmprate;
|
||||
}
|
||||
|
||||
/*
|
||||
* Compare the remainder with the best remainder found until
|
||||
* now and elect a new best multiplier/divider pair if the
|
||||
* current remainder is smaller than the best one.
|
||||
*/
|
||||
if (remainder < bestremainder) {
|
||||
bestremainder = remainder;
|
||||
bestdiv = tmpdiv;
|
||||
bestmul = tmpmul;
|
||||
bestrate = tmprate;
|
||||
bestfrac = tmpfrac;
|
||||
}
|
||||
|
||||
/* We've found a perfect match! */
|
||||
if (!remainder)
|
||||
break;
|
||||
}
|
||||
|
||||
/* Check if bestrate is a valid output rate */
|
||||
if (bestrate < characteristics->output[0].min &&
|
||||
bestrate > characteristics->output[0].max)
|
||||
return -ERANGE;
|
||||
|
||||
if (update) {
|
||||
pll->div = bestdiv - 1;
|
||||
pll->mul = bestmul - 1;
|
||||
pll->frac = bestfrac;
|
||||
}
|
||||
|
||||
return bestrate;
|
||||
}
|
||||
|
||||
static long sam9x60_pll_round_rate(struct clk_hw *hw, unsigned long rate,
|
||||
unsigned long *parent_rate)
|
||||
{
|
||||
struct sam9x60_pll *pll = to_sam9x60_pll(hw);
|
||||
|
||||
return sam9x60_pll_get_best_div_mul(pll, rate, *parent_rate, false);
|
||||
}
|
||||
|
||||
static int sam9x60_pll_set_rate(struct clk_hw *hw, unsigned long rate,
|
||||
unsigned long parent_rate)
|
||||
{
|
||||
struct sam9x60_pll *pll = to_sam9x60_pll(hw);
|
||||
|
||||
return sam9x60_pll_get_best_div_mul(pll, rate, parent_rate, true);
|
||||
}
|
||||
|
||||
static const struct clk_ops pll_ops = {
|
||||
.prepare = sam9x60_pll_prepare,
|
||||
.unprepare = sam9x60_pll_unprepare,
|
||||
.is_prepared = sam9x60_pll_is_prepared,
|
||||
.recalc_rate = sam9x60_pll_recalc_rate,
|
||||
.round_rate = sam9x60_pll_round_rate,
|
||||
.set_rate = sam9x60_pll_set_rate,
|
||||
};
|
||||
|
||||
struct clk_hw * __init
|
||||
sam9x60_clk_register_pll(struct regmap *regmap, spinlock_t *lock,
|
||||
const char *name, const char *parent_name, u8 id,
|
||||
const struct clk_pll_characteristics *characteristics)
|
||||
{
|
||||
struct sam9x60_pll *pll;
|
||||
struct clk_hw *hw;
|
||||
struct clk_init_data init;
|
||||
unsigned int pllr;
|
||||
int ret;
|
||||
|
||||
if (id > PLL_MAX_ID)
|
||||
return ERR_PTR(-EINVAL);
|
||||
|
||||
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
|
||||
if (!pll)
|
||||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
init.name = name;
|
||||
init.ops = &pll_ops;
|
||||
init.parent_names = &parent_name;
|
||||
init.num_parents = 1;
|
||||
init.flags = CLK_SET_RATE_GATE;
|
||||
|
||||
pll->id = id;
|
||||
pll->hw.init = &init;
|
||||
pll->characteristics = characteristics;
|
||||
pll->regmap = regmap;
|
||||
pll->lock = lock;
|
||||
|
||||
regmap_write(regmap, PMC_PLL_UPDT, id);
|
||||
regmap_read(regmap, PMC_PLL_CTRL0, &pllr);
|
||||
pll->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, pllr);
|
||||
regmap_read(regmap, PMC_PLL_CTRL1, &pllr);
|
||||
pll->mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, pllr);
|
||||
|
||||
hw = &pll->hw;
|
||||
ret = clk_hw_register(NULL, hw);
|
||||
if (ret) {
|
||||
kfree(pll);
|
||||
hw = ERR_PTR(ret);
|
||||
}
|
||||
|
||||
return hw;
|
||||
}
|
||||
|
|
@ -69,6 +69,7 @@ struct clk_pll_characteristics {
|
|||
struct clk_range *output;
|
||||
u16 *icpll;
|
||||
u8 *out;
|
||||
u8 upll : 1;
|
||||
};
|
||||
|
||||
struct clk_programmable_layout {
|
||||
|
@ -169,6 +170,11 @@ struct clk_hw * __init
|
|||
at91_clk_register_plldiv(struct regmap *regmap, const char *name,
|
||||
const char *parent_name);
|
||||
|
||||
struct clk_hw * __init
|
||||
sam9x60_clk_register_pll(struct regmap *regmap, spinlock_t *lock,
|
||||
const char *name, const char *parent_name, u8 id,
|
||||
const struct clk_pll_characteristics *characteristics);
|
||||
|
||||
struct clk_hw * __init
|
||||
at91_clk_register_programmable(struct regmap *regmap, const char *name,
|
||||
const char **parent_names, u8 num_parents, u8 id,
|
||||
|
|
Загрузка…
Ссылка в новой задаче