microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>( 

Saves a bit of text as the call takes fewer args.

Coalesce a few formats.
Convert a few bare printks to pr_cont.

$ size drivers/ata/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 558429	  73893	 117864	 750186	  b726a	drivers/ata/built-in.o.allyesconfig.new
 559574	  73893	 117888	 751355	  b76fb	drivers/ata/built-in.o.allyesconfig.old
 149567	  14689	   4220	 168476	  2921c	drivers/ata/built-in.o.defconfig.new
 149851	  14689	   4220	 168760	  29338	drivers/ata/built-in.o.defconfig.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Joe Perches 2011-04-15 15:51:58 -07:00 коммит произвёл Jeff Garzik
Родитель 02f8c6aee8
Коммит a44fec1fce
27 изменённых файлов: 189 добавлений и 230 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

15
drivers/ata/acard-ahci.c
Просмотреть файл

@ -135,7 +135,7 @@ static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg
if (mesg.event & PM_EVENT_SUSPEND &&
hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"BIOS update required for suspend/resume\n");
return -EIO;
}
@ -187,7 +187,7 @@ static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
@ -195,13 +195,12 @@ static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
@ -343,13 +342,11 @@ static int acard_ahci_port_start(struct ata_port *ap)
if (cmd & PORT_CMD_FBSCP)
pp->fbs_supported = true;
else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
dev_printk(KERN_INFO, dev,
"port %d can do FBS, forcing FBSCP\n",
dev_info(dev, "port %d can do FBS, forcing FBSCP\n",
ap->port_no);
pp->fbs_supported = true;
} else
dev_printk(KERN_WARNING, dev,
"port %d is not capable of FBS\n",
dev_warn(dev, "port %d is not capable of FBS\n",
ap->port_no);
}

34
drivers/ata/ahci.c
Просмотреть файл

@ -629,7 +629,7 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
if (mesg.event & PM_EVENT_SUSPEND &&
hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"BIOS update required for suspend/resume\n");
return -EIO;
}
@ -681,7 +681,7 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
@ -689,13 +689,12 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
@ -759,8 +758,8 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
dmi_check_system(sysids)) {
struct ata_port *ap = host->ports[1];
dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
"Deluxe on-board SIMG4726 workaround\n");
dev_info(&pdev->dev,
"enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround\n");
ap->ops = &ahci_p5wdh_ops;
ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
@ -831,14 +830,14 @@ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
if (strcmp(buf, match->driver_data) >= 0)
goto enable_64bit;
else {
dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
"forcing 32bit DMA, update BIOS\n", match->ident);
dev_warn(&pdev->dev,
"%s: BIOS too old, forcing 32bit DMA, update BIOS\n",
match->ident);
return false;
}
enable_64bit:
dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
match->ident);
dev_warn(&pdev->dev, "%s: enabling 64bit DMA\n", match->ident);
return true;
}
@ -1041,8 +1040,7 @@ static void ahci_gtf_filter_workaround(struct ata_host *host)
return;
filter = (unsigned long)dmi->driver_data;
dev_printk(KERN_INFO, host->dev,
"applying extra ACPI _GTF filter 0x%x for %s\n",
dev_info(host->dev, "applying extra ACPI _GTF filter 0x%x for %s\n",
filter, dmi->ident);
for (i = 0; i < host->n_ports; i++) {
@ -1099,8 +1097,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
* that for SAS drives they're out of luck.
*/
if (pdev->vendor == PCI_VENDOR_ID_PROMISE)
dev_printk(KERN_INFO, &pdev->dev, "PDC42819 "
"can only drive SATA devices with this driver\n");
dev_info(&pdev->dev,
"PDC42819 can only drive SATA devices with this driver\n");
/* acquire resources */
rc = pcim_enable_device(pdev);
@ -1126,8 +1124,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
pci_read_config_byte(pdev, ICH_MAP, &map);
if (map & 0x3) {
dev_printk(KERN_INFO, &pdev->dev, "controller is in "
"combined mode, can't enable AHCI mode\n");
dev_info(&pdev->dev,
"controller is in combined mode, can't enable AHCI mode\n");
return -ENODEV;
}
}
@ -1184,7 +1182,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (ahci_broken_suspend(pdev)) {
hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
dev_printk(KERN_WARNING, &pdev->dev,
dev_warn(&pdev->dev,
"BIOS update required for suspend/resume\n");
}

37
drivers/ata/ata_piix.c
Просмотреть файл

@ -1225,8 +1225,9 @@ static int piix_pci_device_resume(struct pci_dev *pdev)
*/
rc = pci_reenable_device(pdev);
if (rc)
dev_printk(KERN_ERR, &pdev->dev, "failed to enable "
"device after resume (%d)\n", rc);
dev_err(&pdev->dev,
"failed to enable device after resume (%d)\n",
rc);
} else
rc = ata_pci_device_do_resume(pdev);
@ -1303,9 +1304,11 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
no_piix_dma = 2;
}
if (no_piix_dma)
dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n");
if (no_piix_dma == 2)
dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n");
dev_warn(&ata_dev->dev,
"450NX errata present, disabling IDE DMA%s\n",
no_piix_dma == 2 ? " - a BIOS update may resolve this"
: "");
return no_piix_dma;
}
@ -1338,37 +1341,36 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
map = map_db->map[map_value & map_db->mask];
dev_printk(KERN_INFO, &pdev->dev, "MAP [");
dev_info(&pdev->dev, "MAP [");
for (i = 0; i < 4; i++) {
switch (map[i]) {
case RV:
invalid_map = 1;
printk(" XX");
pr_cont(" XX");
break;
case NA:
printk(" --");
pr_cont(" --");
break;
case IDE:
WARN_ON((i & 1) || map[i + 1] != IDE);
pinfo[i / 2] = piix_port_info[ich_pata_100];
i++;
printk(" IDE IDE");
pr_cont(" IDE IDE");
break;
default:
printk(" P%d", map[i]);
pr_cont(" P%d", map[i]);
if (i & 1)
pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS;
break;
}
}
printk(" ]\n");
pr_cont(" ]\n");
if (invalid_map)
dev_printk(KERN_ERR, &pdev->dev,
"invalid MAP value %u\n", map_value);
dev_err(&pdev->dev, "invalid MAP value %u\n", map_value);
return map;
}
@ -1398,7 +1400,7 @@ static bool piix_no_sidpr(struct ata_host *host)
if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
pdev->subsystem_device == 0xb049) {
dev_printk(KERN_WARNING, host->dev,
dev_warn(host->dev,
"Samsung DB-P70 detected, disabling SIDPR\n");
return true;
}
@ -1451,8 +1453,8 @@ static int __devinit piix_init_sidpr(struct ata_host *host)
piix_sidpr_scr_read(link0, SCR_CONTROL, &scontrol);
if ((scontrol & 0xf00) != 0x300) {
dev_printk(KERN_INFO, host->dev, "SCR access via "
"SIDPR is available but doesn't work\n");
dev_info(host->dev,
"SCR access via SIDPR is available but doesn't work\n");
return 0;
}
}
@ -1501,8 +1503,7 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host)
* affected systems.
*/
if (hpriv->saved_iocfg & (1 << 18)) {
dev_printk(KERN_INFO, &pdev->dev,
"applying IOCFG bit18 quirk\n");
dev_info(&pdev->dev, "applying IOCFG bit18 quirk\n");
pci_write_config_dword(pdev, PIIX_IOCFG,
hpriv->saved_iocfg & ~(1 << 18));
}

55
drivers/ata/libahci.c
Просмотреть файл

@ -410,49 +410,44 @@ void ahci_save_initial_config(struct device *dev,
/* some chips have errata preventing 64bit use */
if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
dev_printk(KERN_INFO, dev,
"controller can't do 64bit DMA, forcing 32bit\n");
dev_info(dev, "controller can't do 64bit DMA, forcing 32bit\n");
cap &= ~HOST_CAP_64;
}
if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
dev_printk(KERN_INFO, dev,
"controller can't do NCQ, turning off CAP_NCQ\n");
dev_info(dev, "controller can't do NCQ, turning off CAP_NCQ\n");
cap &= ~HOST_CAP_NCQ;
}
if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
dev_printk(KERN_INFO, dev,
"controller can do NCQ, turning on CAP_NCQ\n");
dev_info(dev, "controller can do NCQ, turning on CAP_NCQ\n");
cap |= HOST_CAP_NCQ;
}
if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
dev_printk(KERN_INFO, dev,
"controller can't do PMP, turning off CAP_PMP\n");
dev_info(dev, "controller can't do PMP, turning off CAP_PMP\n");
cap &= ~HOST_CAP_PMP;
}
if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
dev_printk(KERN_INFO, dev,
dev_info(dev,
"controller can't do SNTF, turning off CAP_SNTF\n");
cap &= ~HOST_CAP_SNTF;
}
if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) {
dev_printk(KERN_INFO, dev,
"controller can do FBS, turning on CAP_FBS\n");
dev_info(dev, "controller can do FBS, turning on CAP_FBS\n");
cap |= HOST_CAP_FBS;
}
if (force_port_map && port_map != force_port_map) {
dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n",
dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
port_map, force_port_map);
port_map = force_port_map;
}
if (mask_port_map) {
dev_printk(KERN_WARNING, dev, "masking port_map 0x%x -> 0x%x\n",
dev_warn(dev, "masking port_map 0x%x -> 0x%x\n",
port_map,
port_map & mask_port_map);
port_map &= mask_port_map;
@ -470,9 +465,8 @@ void ahci_save_initial_config(struct device *dev,
* port_map and let it be generated from n_ports.
*/
if (map_ports > ahci_nr_ports(cap)) {
dev_printk(KERN_WARNING, dev,
"implemented port map (0x%x) contains more "
"ports than nr_ports (%u), using nr_ports\n",
dev_warn(dev,
"implemented port map (0x%x) contains more ports than nr_ports (%u), using nr_ports\n",
port_map, ahci_nr_ports(cap));
port_map = 0;
}
@ -481,8 +475,7 @@ void ahci_save_initial_config(struct device *dev,
/* fabricate port_map from cap.nr_ports */
if (!port_map) {
port_map = (1 << ahci_nr_ports(cap)) - 1;
dev_printk(KERN_WARNING, dev,
"forcing PORTS_IMPL to 0x%x\n", port_map);
dev_warn(dev, "forcing PORTS_IMPL to 0x%x\n", port_map);
/* write the fixed up value to the PI register */
hpriv->saved_port_map = port_map;
@ -822,8 +815,8 @@ int ahci_reset_controller(struct ata_host *host)
HOST_RESET, 10, 1000);
if (tmp & HOST_RESET) {
dev_printk(KERN_ERR, host->dev,
"controller reset failed (0x%x)\n", tmp);
dev_err(host->dev, "controller reset failed (0x%x)\n",
tmp);
return -EIO;
}
@ -835,8 +828,7 @@ int ahci_reset_controller(struct ata_host *host)
*/
ahci_restore_initial_config(host);
} else
dev_printk(KERN_INFO, host->dev,
"skipping global host reset\n");
dev_info(host->dev, "skipping global host reset\n");
return 0;
}
@ -1474,8 +1466,7 @@ static void ahci_fbs_dec_intr(struct ata_port *ap)
}
if (fbs & PORT_FBS_DEC)
dev_printk(KERN_ERR, ap->host->dev,
"failed to clear device error\n");
dev_err(ap->host->dev, "failed to clear device error\n");
}
static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
@ -1713,7 +1704,7 @@ irqreturn_t ahci_interrupt(int irq, void *dev_instance)
} else {
VPRINTK("port %u (no irq)\n", i);
if (ata_ratelimit())
dev_printk(KERN_WARNING, host->dev,
dev_warn(host->dev,
"interrupt on disabled port %u\n", i);
}
@ -1865,11 +1856,11 @@ static void ahci_enable_fbs(struct ata_port *ap)
writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
fbs = readl(port_mmio + PORT_FBS);
if (fbs & PORT_FBS_EN) {
dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n");
dev_info(ap->host->dev, "FBS is enabled\n");
pp->fbs_enabled = true;
pp->fbs_last_dev = -1; /* initialization */
} else
dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n");
dev_err(ap->host->dev, "Failed to enable FBS\n");
ahci_start_engine(ap);
}
@ -1897,9 +1888,9 @@ static void ahci_disable_fbs(struct ata_port *ap)
writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
fbs = readl(port_mmio + PORT_FBS);
if (fbs & PORT_FBS_EN)
dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n");
dev_err(ap->host->dev, "Failed to disable FBS\n");
else {
dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n");
dev_info(ap->host->dev, "FBS is disabled\n");
pp->fbs_enabled = false;
}
@ -2003,13 +1994,11 @@ static int ahci_port_start(struct ata_port *ap)
if (cmd & PORT_CMD_FBSCP)
pp->fbs_supported = true;
else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
dev_printk(KERN_INFO, dev,
"port %d can do FBS, forcing FBSCP\n",
dev_info(dev, "port %d can do FBS, forcing FBSCP\n",
ap->port_no);
pp->fbs_supported = true;
} else
dev_printk(KERN_WARNING, dev,
"port %d is not capable of FBS\n",
dev_warn(dev, "port %d is not capable of FBS\n",
ap->port_no);
}

11
drivers/ata/libata-core.c
Просмотреть файл

@ -5847,9 +5847,9 @@ int ata_host_start(struct ata_host *host)
rc = ap->ops->port_start(ap);
if (rc) {
if (rc != -ENODEV)
dev_printk(KERN_ERR, host->dev,
"failed to start port %d "
"(errno=%d)\n", i, rc);
dev_err(host->dev,
"failed to start port %d (errno=%d)\n",
i, rc);
goto err_out;
}
}
@ -5971,8 +5971,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
/* host must have been started */
if (!(host->flags & ATA_HOST_STARTED)) {
dev_printk(KERN_ERR, host->dev,
"BUG: trying to register unstarted host\n");
dev_err(host->dev, "BUG: trying to register unstarted host\n");
WARN_ON(1);
return -EINVAL;
}
@ -6242,7 +6241,7 @@ int ata_pci_device_do_resume(struct pci_dev *pdev)
rc = pcim_enable_device(pdev);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"failed to enable device after resume (%d)\n", rc);
return rc;
}

20
drivers/ata/libata-sff.c
Просмотреть файл

@ -2316,9 +2316,9 @@ int ata_pci_sff_init_host(struct ata_host *host)
rc = pcim_iomap_regions(pdev, 0x3 << base,
dev_driver_string(gdev));
if (rc) {
dev_printk(KERN_WARNING, gdev,
"failed to request/iomap BARs for port %d "
"(errno=%d)\n", i, rc);
dev_warn(gdev,
"failed to request/iomap BARs for port %d (errno=%d)\n",
i, rc);
if (rc == -EBUSY)
pcim_pin_device(pdev);
ap->ops = &ata_dummy_port_ops;
@ -2340,7 +2340,7 @@ int ata_pci_sff_init_host(struct ata_host *host)
}
if (!mask) {
dev_printk(KERN_ERR, gdev, "no available native port\n");
dev_err(gdev, "no available native port\n");
return -ENODEV;
}
@ -2375,8 +2375,7 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
if (!host) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to allocate ATA host\n");
dev_err(&pdev->dev, "failed to allocate ATA host\n");
rc = -ENOMEM;
goto err_out;
}
@ -2542,8 +2541,7 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
pi = ata_sff_find_valid_pi(ppi);
if (!pi) {
dev_printk(KERN_ERR, &pdev->dev,
"no valid port_info specified\n");
dev_err(&pdev->dev, "no valid port_info specified\n");
return -EINVAL;
}
@ -3164,8 +3162,7 @@ static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
{
int i;
dev_printk(KERN_ERR, host->dev, "BMDMA: %s, falling back to PIO\n",
reason);
dev_err(host->dev, "BMDMA: %s, falling back to PIO\n", reason);
for (i = 0; i < 2; i++) {
host->ports[i]->mwdma_mask = 0;
@ -3297,8 +3294,7 @@ int ata_pci_bmdma_init_one(struct pci_dev *pdev,
pi = ata_sff_find_valid_pi(ppi);
if (!pi) {
dev_printk(KERN_ERR, &pdev->dev,
"no valid port_info specified\n");
dev_err(&pdev->dev, "no valid port_info specified\n");
return -EINVAL;
}

2
drivers/ata/pata_amd.c
Просмотреть файл

@ -60,7 +60,7 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
UT = T / 2;
if (ata_timing_compute(adev, speed, &at, T, UT) < 0) {
dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed);
dev_err(&pdev->dev, "unknown mode %d\n", speed);
return;
}

11
drivers/ata/pata_atp867x.c
Просмотреть файл

@ -470,7 +470,7 @@ static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
}
if (!mask) {
dev_printk(KERN_ERR, gdev, "no available native port\n");
dev_err(gdev, "no available native port\n");
return -ENODEV;
}
@ -500,7 +500,7 @@ static int atp867x_init_one(struct pci_dev *pdev,
int rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
@ -511,15 +511,14 @@ static int atp867x_init_one(struct pci_dev *pdev,
host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS);
if (!host) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to allocate ATA host\n");
dev_err(&pdev->dev, "failed to allocate ATA host\n");
rc = -ENOMEM;
goto err_out;
}
rc = atp867x_ata_pci_sff_init_host(host);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to init host\n");
dev_err(&pdev->dev, "failed to init host\n");
goto err_out;
}
@ -528,7 +527,7 @@ static int atp867x_init_one(struct pci_dev *pdev,
rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
IRQF_SHARED, &atp867x_sht);
if (rc)
dev_printk(KERN_ERR, &pdev->dev, "failed to activate host\n");
dev_err(&pdev->dev, "failed to activate host\n");
err_out:
return rc;

3
drivers/ata/pata_cs5520.c
Просмотреть файл

@ -149,8 +149,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
ppi[1] = &pi;
if ((pcicfg & 0x40) == 0) {
dev_printk(KERN_WARNING, &pdev->dev,
"DMA mode disabled. Enabling.\n");
dev_warn(&pdev->dev, "DMA mode disabled. Enabling.\n");
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
}

2
drivers/ata/pata_ixp4xx_cf.c
Просмотреть файл

@ -181,7 +181,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
ixp4xx_setup_port(ap, data, cs0->start, cs1->start);
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
/* activate host */
return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);

5
drivers/ata/pata_macio.c
Просмотреть файл

@ -772,8 +772,9 @@ static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
pci_restore_state(priv->pdev);
rc = pcim_enable_device(priv->pdev);
if (rc)
dev_printk(KERN_ERR, &priv->pdev->dev,
"Failed to enable device after resume (%d)\n", rc);
dev_err(&priv->pdev->dev,
"Failed to enable device after resume (%d)\n",
rc);
else
pci_set_master(priv->pdev);
}

2
drivers/ata/pata_ns87410.c
Просмотреть файл

@ -86,7 +86,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
idefr &= ~0x04;
if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) {
dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", adev->pio_mode);
dev_err(&pdev->dev, "unknown mode %d\n", adev->pio_mode);
return;
}

2
drivers/ata/pata_pdc2027x.c
Просмотреть файл

@ -655,7 +655,7 @@ static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
*/
pll_clock = pdc_detect_pll_input_clock(host);
dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
dev_info(host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
/* Adjust PLL control register */
pdc_adjust_pll(host, pll_clock, board_idx);

6
drivers/ata/pata_sl82c105.c
Просмотреть файл

@ -317,9 +317,11 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
rev = sl82c105_bridge_revision(dev);
if (rev == -1)
dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n");
dev_warn(&dev->dev,
"pata_sl82c105: Unable to find bridge, disabling DMA\n");
else if (rev <= 5)
dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n");
dev_warn(&dev->dev,
"pata_sl82c105: Early bridge revision, no DMA available\n");
else
ppi[0] = &info_dma;

6
drivers/ata/pdc_adma.c
Просмотреть файл

@ -596,14 +596,12 @@ static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
return rc;
}
return 0;

14
drivers/ata/sata_fsl.c
Просмотреть файл

@ -661,8 +661,7 @@ static int sata_fsl_port_start(struct ata_port *ap)
sata_fsl_scr_write(&ap->link, SCR_CONTROL, temp);
sata_fsl_scr_read(&ap->link, SCR_CONTROL, &temp);
dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
temp);
dev_warn(dev, "scr_control, speed limited to %x\n", temp);
#endif
return 0;
@ -1202,8 +1201,7 @@ static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance)
if (ap) {
sata_fsl_host_intr(ap);
} else {
dev_printk(KERN_WARNING, host->dev,
"interrupt on disabled port 0\n");
dev_warn(host->dev, "interrupt on disabled port 0\n");
}
iowrite32(interrupt_enables, hcr_base + HSTATUS);
@ -1317,8 +1315,7 @@ static int sata_fsl_probe(struct platform_device *ofdev)
struct ata_port_info pi = sata_fsl_port_info[0];
const struct ata_port_info *ppi[] = { &pi, NULL };
dev_printk(KERN_INFO, &ofdev->dev,
"Sata FSL Platform/CSB Driver init\n");
dev_info(&ofdev->dev, "Sata FSL Platform/CSB Driver init\n");
hcr_base = of_iomap(ofdev->dev.of_node, 0);
if (!hcr_base)
@ -1347,7 +1344,7 @@ static int sata_fsl_probe(struct platform_device *ofdev)
irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
if (irq < 0) {
dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
dev_err(&ofdev->dev, "invalid irq from platform\n");
goto error_exit_with_cleanup;
}
host_priv->irq = irq;
@ -1422,8 +1419,7 @@ static int sata_fsl_resume(struct platform_device *op)
ret = sata_fsl_init_controller(host);
if (ret) {
dev_printk(KERN_ERR, &op->dev,
"Error initialize hardware\n");
dev_err(&op->dev, "Error initializing hardware\n");
return ret;
}

12
drivers/ata/sata_inic162x.c
Просмотреть файл

@ -847,15 +847,13 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Set dma_mask. This devices doesn't support 64bit addressing. */
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
return rc;
}
@ -866,15 +864,13 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
rc = pci_set_dma_max_seg_size(pdev, 65536 - 512);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to set the maximum segment size.\n");
dev_err(&pdev->dev, "failed to set the maximum segment size\n");
return rc;
}
rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to initialize controller\n");
dev_err(&pdev->dev, "failed to initialize controller\n");
return rc;
}

33
drivers/ata/sata_mv.c
Просмотреть файл

@ -2930,8 +2930,7 @@ static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
err_cause = readl(mmio + hpriv->irq_cause_offset);
dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
err_cause);
dev_err(host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n", err_cause);
DPRINTK("All regs @ PCI error\n");
mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
@ -3760,7 +3759,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hp_flags |= MV_HP_ERRATA_50XXB2;
break;
default:
dev_printk(KERN_WARNING, &pdev->dev,
dev_warn(&pdev->dev,
"Applying 50XXB2 workarounds to unknown rev\n");
hp_flags |= MV_HP_ERRATA_50XXB2;
break;
@ -3780,7 +3779,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hp_flags |= MV_HP_ERRATA_50XXB2;
break;
default:
dev_printk(KERN_WARNING, &pdev->dev,
dev_warn(&pdev->dev,
"Applying B2 workarounds to unknown rev\n");
hp_flags |= MV_HP_ERRATA_50XXB2;
break;
@ -3801,7 +3800,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
default:
dev_printk(KERN_WARNING, &pdev->dev,
dev_warn(&pdev->dev,
"Applying B2 workarounds to unknown rev\n");
hp_flags |= MV_HP_ERRATA_60X1B2;
break;
@ -3851,7 +3850,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
default:
dev_printk(KERN_WARNING, &pdev->dev,
dev_warn(&pdev->dev,
"Applying 60X1C0 workarounds to unknown rev\n");
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
@ -3867,8 +3866,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
break;
default:
dev_printk(KERN_ERR, host->dev,
"BUG: invalid board index %u\n", board_idx);
dev_err(host->dev, "BUG: invalid board index %u\n", board_idx);
return 1;
}
@ -4033,7 +4031,7 @@ static int mv_platform_probe(struct platform_device *pdev)
int n_ports, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
/*
* Simple resource validation ..
@ -4091,9 +4089,8 @@ static int mv_platform_probe(struct platform_device *pdev)
if (rc)
goto err;
dev_printk(KERN_INFO, &pdev->dev,
"slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH,
host->n_ports);
dev_info(&pdev->dev, "slots %u ports %d\n",
(unsigned)MV_MAX_Q_DEPTH, host->n_ports);
return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
IRQF_SHARED, &mv6_sht);
@ -4217,7 +4214,7 @@ static int pci_go_64(struct pci_dev *pdev)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
@ -4225,13 +4222,12 @@ static int pci_go_64(struct pci_dev *pdev)
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
@ -4276,8 +4272,7 @@ static void mv_print_info(struct ata_host *host)
else
gen = "?";
dev_printk(KERN_INFO, &pdev->dev,
"Gen-%s %u slots %u ports %s mode IRQ via %s\n",
dev_info(&pdev->dev, "Gen-%s %u slots %u ports %s mode IRQ via %s\n",
gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
}
@ -4301,7 +4296,7 @@ static int mv_pci_init_one(struct pci_dev *pdev,
int n_ports, port, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
/* allocate host */
n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC;

6
drivers/ata/sata_nv.c
Просмотреть файл

@ -2382,10 +2382,10 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* determine type and allocate host */
if (type == CK804 && adma_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
dev_notice(&pdev->dev, "Using ADMA mode\n");
type = ADMA;
} else if (type == MCP5x && swncq_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
dev_notice(&pdev->dev, "Using SWNCQ mode\n");
type = SWNCQ;
}
@ -2429,7 +2429,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
nv_swncq_host_init(host);
if (msi_enabled) {
dev_printk(KERN_NOTICE, &pdev->dev, "Using MSI\n");
dev_notice(&pdev->dev, "Using MSI\n");
pci_enable_msi(pdev);
}

2
drivers/ata/sata_promise.c
Просмотреть файл

@ -1217,7 +1217,7 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host) {
dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
dev_err(&pdev->dev, "failed to allocate host\n");
return -ENOMEM;
}
host->iomap = pcim_iomap_table(pdev);

7
drivers/ata/sata_qstor.c
Просмотреть файл

@ -563,7 +563,7 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
@ -571,13 +571,12 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}

7
drivers/ata/sata_sil.c
Просмотреть файл

@ -676,7 +676,7 @@ static void sil_init_controller(struct ata_host *host)
writew(cls << 8 | cls,
mmio_base + sil_port[i].fifo_cfg);
} else
dev_printk(KERN_WARNING, &pdev->dev,
dev_warn(&pdev->dev,
"cache line size not set. Driver may not function\n");
/* Apply R_ERR on DMA activate FIS errata workaround */
@ -688,9 +688,8 @@ static void sil_init_controller(struct ata_host *host)
if ((tmp & 0x3) != 0x01)
continue;
if (!cnt)
dev_printk(KERN_INFO, &pdev->dev,
"Applying R_ERR on DMA activate "
"FIS errata fix\n");
dev_info(&pdev->dev,
"Applying R_ERR on DMA activate FIS errata fix\n");
writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
cnt++;
}

16
drivers/ata/sata_sil24.c
Просмотреть файл

@ -1256,7 +1256,7 @@ static void sil24_init_controller(struct ata_host *host)
PORT_CS_PORT_RST,
PORT_CS_PORT_RST, 10, 100);
if (tmp & PORT_CS_PORT_RST)
dev_printk(KERN_ERR, host->dev,
dev_err(host->dev,
"failed to clear port RST\n");
}
@ -1302,9 +1302,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
dev_printk(KERN_INFO, &pdev->dev,
"Applying completion IRQ loss on PCI-X "
"errata fix\n");
dev_info(&pdev->dev,
"Applying completion IRQ loss on PCI-X errata fix\n");
else
pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
}
@ -1322,7 +1321,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
@ -1330,13 +1329,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
dev_err(&pdev->dev, "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
@ -1350,7 +1348,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
sil24_init_controller(host);
if (sata_sil24_msi && !pci_enable_msi(pdev)) {
dev_printk(KERN_INFO, &pdev->dev, "Using MSI\n");
dev_info(&pdev->dev, "Using MSI\n");
pci_intx(pdev, 0);
}

16
drivers/ata/sata_sis.c
Просмотреть файл

@ -203,7 +203,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
int i, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
@ -241,11 +241,11 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
break;
}
if ((pmr & SIS_PMR_COMBINED) == 0) {
dev_printk(KERN_INFO, &pdev->dev,
dev_info(&pdev->dev,
"Detected SiS 180/181/964 chipset in SATA mode\n");
port2_start = 64;
} else {
dev_printk(KERN_INFO, &pdev->dev,
dev_info(&pdev->dev,
"Detected SiS 180/181 chipset in combined mode\n");
port2_start = 0;
pi.flags |= ATA_FLAG_SLAVE_POSS;
@ -256,23 +256,21 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
case 0x0183:
pci_read_config_dword(pdev, 0x6C, &val);
if (val & (1L << 31)) {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 182/965 chipset\n");
dev_info(&pdev->dev, "Detected SiS 182/965 chipset\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
} else {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 182/965L chipset\n");
dev_info(&pdev->dev, "Detected SiS 182/965L chipset\n");
}
break;
case 0x1182:
dev_printk(KERN_INFO, &pdev->dev,
dev_info(&pdev->dev,
"Detected SiS 1182/966/680 SATA controller\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
break;
case 0x1183:
dev_printk(KERN_INFO, &pdev->dev,
dev_info(&pdev->dev,
"Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
ppi[0] = &sis_info133_for_sata;
ppi[1] = &sis_info133_for_sata;

2
drivers/ata/sata_uli.c
Просмотреть файл

@ -155,7 +155,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
int n_ports, rc;
if (!printed_version++)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
dev_info(&pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)

14
drivers/ata/sata_via.c
Просмотреть файл

@ -469,7 +469,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n");
return rc;
}
@ -488,14 +488,14 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
*r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi));
if (!host) {
dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
dev_err(&pdev->dev, "failed to allocate host\n");
return -ENOMEM;
}
rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap "
"PCI BARs (errno=%d)\n", rc);
dev_err(&pdev->dev, "failed to request/iomap PCI BARs (errno=%d)\n",
rc);
return rc;
}
host->iomap = pcim_iomap_table(pdev);
@ -526,7 +526,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n");
return rc;
}
@ -542,7 +542,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
u8 tmp8;
pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
dev_info(&pdev->dev, "routed to hard irq line %d\n",
(int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
/* make sure SATA channels are enabled */
@ -628,7 +628,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
if ((pci_resource_start(pdev, i) == 0) ||
(pci_resource_len(pdev, i) < bar_sizes[i])) {
dev_printk(KERN_ERR, &pdev->dev,
dev_err(&pdev->dev,
"invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n",
i,
(unsigned long long)pci_resource_start(pdev, i),

5
drivers/ata/sata_vsc.c
Просмотреть файл

@ -273,9 +273,8 @@ static irqreturn_t vsc_sata_interrupt(int irq, void *dev_instance)
if (unlikely(status == 0xffffffff || status == 0)) {
if (status)
dev_printk(KERN_ERR, host->dev,
": IRQ status == 0xffffffff, "
"PCI fault or device removal?\n");
dev_err(host->dev,
": IRQ status == 0xffffffff, PCI fault or device removal?\n");
goto out;
}