microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

sh: Reworked SH7780 PCI initialization. 

This consolidates the PCI initialization code for all of the pci-sh7780
users, and sets up the memory window dynamically as opposed to using
hardcoded window positions.

A number of bugs were fixed at the same time, including the PIO handling
and master abort timeout settings being incorrect.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Paul Mundt 2010-01-29 22:19:04 +09:00
Родитель 9762528f37
Коммит a45635dfb0
5 изменённых файлов: 94 добавлений и 137 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

12
arch/sh/drivers/pci/fixups-r7780rp.c
Просмотреть файл

@ -22,15 +22,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
return irq_tab[slot];
}
int pci_fixup_pcic(struct pci_channel *chan)
{
pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
return 0;
}

19
arch/sh/drivers/pci/fixups-sdk7780.c
Просмотреть файл

@ -31,22 +31,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
return sdk7780_irq_tab[pin-1][slot];
}
int pci_fixup_pcic(struct pci_channel *chan)
{
/* Enable all interrupts, so we know what to fix */
pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
/* Set up standard PCI config registers */
pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */
pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */
pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */
pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
return 0;
}

13
arch/sh/drivers/pci/pci-sh4.h
Просмотреть файл

@ -49,6 +49,17 @@
#define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */
#define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */
#define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */
#define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */
#define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */
#define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */
#define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */
#define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */
#define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */
#define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */
#define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */
#define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */
#define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */
#define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */
#define SH4_PCIALR 0x11C /* Error Address Register */
#define SH4_PCICLR 0x120 /* Error Command/Data */
#define SH4_PCICLR_MPIO 0x80000000
@ -61,7 +72,7 @@
#define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */
#define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */
#define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */
#define SH4_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */
#define SH4_PCIAINT_MBTO 0x00000800 /* Master Bus Time Out */
#define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */
#define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */
#define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */

133
arch/sh/drivers/pci/pci-sh7780.c
Просмотреть файл

@ -1,7 +1,7 @@
/*
* Low-Level PCI Support for the SH7780
*
* Copyright (C) 2005 - 2009 Paul Mundt
* Copyright (C) 2005 - 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@ -14,11 +14,13 @@
#include <linux/errno.h>
#include <linux/delay.h>
#include "pci-sh4.h"
#include <asm/mmu.h>
#include <asm/sizes.h>
static struct resource sh7785_io_resource = {
.name = "SH7785_IO",
.start = SH7780_PCI_IO_BASE,
.end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
.start = 0x1000,
.end = SH7780_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
@ -38,25 +40,14 @@ static struct pci_channel sh7780_pci_controller = {
.io_map_base = SH7780_PCI_IO_BASE,
};
static struct sh4_pci_address_map sh7780_pci_map = {
.window0 = {
#if defined(CONFIG_32BIT)
.base = SH7780_32BIT_DDR_BASE_ADDR,
.size = 0x40000000,
#else
.base = SH7780_CS0_BASE_ADDR,
.size = 0x20000000,
#endif
},
};
static int __init sh7780_pci_init(void)
{
struct pci_channel *chan = &sh7780_pci_controller;
phys_addr_t memphys;
size_t memsize;
unsigned int id;
const char *type = NULL;
const char *type;
int ret;
u32 word;
printk(KERN_NOTICE "PCI: Starting intialization.\n");
@ -65,17 +56,24 @@ static int __init sh7780_pci_init(void)
/* Enable CPU access to the PCIC registers. */
__raw_writel(PCIECR_ENBL, PCIECR);
id = __raw_readw(chan->reg_base + SH7780_PCIVID);
if (id != SH7780_VENDOR_ID) {
/* Reset */
__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST,
chan->reg_base + SH4_PCICR);
/* Wait for it to come back up.. */
mdelay(100);
id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
if (id != PCI_VENDOR_ID_RENESAS) {
printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
return -ENODEV;
}
id = __raw_readw(chan->reg_base + SH7780_PCIDID);
type = (id == SH7763_DEVICE_ID) ? "SH7763" :
(id == SH7780_DEVICE_ID) ? "SH7780" :
(id == SH7781_DEVICE_ID) ? "SH7781" :
(id == SH7785_DEVICE_ID) ? "SH7785" :
id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
(id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
(id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
(id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
NULL;
if (unlikely(!type)) {
printk(KERN_ERR "PCI: Found an unsupported Renesas host "
@ -85,59 +83,78 @@ static int __init sh7780_pci_init(void)
printk(KERN_NOTICE "PCI: Found a Renesas %s host "
"controller, revision %d.\n", type,
__raw_readb(chan->reg_base + SH7780_PCIRID));
__raw_readb(chan->reg_base + PCI_REVISION_ID));
if ((ret = sh4_pci_check_direct(chan)) != 0)
return ret;
/*
* Set the class and sub-class codes.
* Now throw it in to register initialization mode and
* start the real work.
*/
__raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
chan->reg_base + SH7780_PCIBCC);
__raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
chan->reg_base + SH7780_PCISUB);
__raw_writel(SH4_PCICR_PREFIX, chan->reg_base + SH4_PCICR);
memphys = __pa(memory_start);
memsize = memory_end - memory_start;
/*
* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
*/
pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
/* Set the values on window 0 PCI config registers */
pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
__raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
__raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
__raw_writel((memsize - 1) << 9 | 1,
chan->reg_base + SH4_PCILSR0);
/* Set up standard PCI config registers */
__raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
__raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
__raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
__raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
/* Clear out PCI arbiter IRQs */
__raw_writel(0, chan->reg_base + SH4_PCIAINT);
__raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
/* Unmask all of the arbiter IRQs. */
__raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
SH4_PCIAINT_WDPE, chan->reg_base + SH4_PCIAINTM);
/* Apply any last-minute PCIC fixups */
pci_fixup_pcic(chan);
/* Clear all error conditions */
__raw_writew(PCI_STATUS_DETECTED_PARITY | \
PCI_STATUS_SIG_SYSTEM_ERROR | \
PCI_STATUS_REC_MASTER_ABORT | \
PCI_STATUS_REC_TARGET_ABORT | \
PCI_STATUS_SIG_TARGET_ABORT | \
PCI_STATUS_PARITY, chan->reg_base + PCI_STATUS);
pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
__raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \
PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
#ifdef CONFIG_32BIT
pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
#endif
/* Unmask all of the PCI IRQs */
__raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \
SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \
SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \
SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \
SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \
SH4_PCIINTM_MRDPEIM, chan->reg_base + SH4_PCIINTM);
/* Set IOBR for windows containing area specified in pci.h */
pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
SH7780_PCIIOBR);
pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
SH7780_PCIIOBMR);
/*
* Disable the cache snoop controller for non-coherent DMA.
*/
__raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
__raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
__raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
__raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
pci_write_reg(chan, word, SH4_PCICR);
__raw_writel(0xfd000000, chan->reg_base + SH7780_PCIMBR0);
__raw_writel(0x00fc0000, chan->reg_base + SH7780_PCIMBMR0);
__raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
__raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
/*
* Initialization mode complete, release the control register and
* enable round robin mode to stop device overruns/starvation.
*/
__raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO,
chan->reg_base + SH4_PCICR);
register_pci_controller(chan);

54
arch/sh/drivers/pci/pci-sh7780.h
Просмотреть файл

@ -12,12 +12,11 @@
#ifndef _PCI_SH7780_H_
#define _PCI_SH7780_H_
/* Platform Specific Values */
#define SH7780_VENDOR_ID 0x1912
#define SH7781_DEVICE_ID 0x0001
#define SH7780_DEVICE_ID 0x0002
#define SH7763_DEVICE_ID 0x0004
#define SH7785_DEVICE_ID 0x0007
#define PCI_VENDOR_ID_RENESAS 0x1912
#define PCI_DEVICE_ID_RENESAS_SH7781 0x0001
#define PCI_DEVICE_ID_RENESAS_SH7780 0x0002
#define PCI_DEVICE_ID_RENESAS_SH7763 0x0004
#define PCI_DEVICE_ID_RENESAS_SH7785 0x0007
/* SH7780 Control Registers */
#define PCIECR 0xFE000008
@ -36,35 +35,6 @@
#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
/* SH7780 PCI Config Registers */
#define SH7780_PCIVID 0x000 /* Vendor ID */
#define SH7780_PCIDID 0x002 /* Device ID */
#define SH7780_PCICMD 0x004 /* Command */
#define SH7780_PCISTATUS 0x006 /* Status */
#define SH7780_PCIRID 0x008 /* Revision ID */
#define SH7780_PCIPIF 0x009 /* Program Interface */
#define SH7780_PCISUB 0x00a /* Sub class code */
#define SH7780_PCIBCC 0x00b /* Base class code */
#define SH7780_PCICLS 0x00c /* Cache line size */
#define SH7780_PCILTM 0x00d /* latency timer */
#define SH7780_PCIHDR 0x00e /* Header type */
#define SH7780_PCIBIST 0x00f /* BIST */
#define SH7780_PCIIBAR 0x010 /* IO Base address */
#define SH7780_PCIMBAR0 0x014 /* Memory base address0 */
#define SH7780_PCIMBAR1 0x018 /* Memory base address1 */
#define SH7780_PCISVID 0x02c /* Sub system vendor ID */
#define SH7780_PCISID 0x02e /* Sub system ID */
#define SH7780_PCICP 0x034
#define SH7780_PCIINTLINE 0x03c /* Interrupt line */
#define SH7780_PCIINTPIN 0x03d /* Interrupt pin */
#define SH7780_PCIMINGNT 0x03e /* Minumum grand */
#define SH7780_PCIMAXLAT 0x03f /* Maxmum latency */
#define SH7780_PCICID 0x040
#define SH7780_PCINIP 0x041
#define SH7780_PCIPMC 0x042
#define SH7780_PCIPMCSR 0x044
#define SH7780_PCIPMCSR_BSE 0x046
#define SH7780_PCICDD 0x047
#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
#define SH7780_PCIAIR 0x11C /* Error Address Register */
@ -78,6 +48,8 @@
#define SH7780_PCIMBR0 0x1E0
#define SH7780_PCIMBMR0 0x1E4
#define SH7780_PCIMBR1 0x1E8
#define SH7780_PCIMBMR1 0x1EC
#define SH7780_PCIMBR2 0x1F0
#define SH7780_PCIMBMR2 0x1F4
#define SH7780_PCIIOBR 0x1F8
@ -87,16 +59,4 @@
#define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */
#define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */
/* General Memory Config Addresses */
#define SH7780_CS0_BASE_ADDR 0x0
#define SH7780_MEM_REGION_SIZE 0x04000000
#define SH7780_CS1_BASE_ADDR (SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_CS2_BASE_ADDR (SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_CS3_BASE_ADDR (SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_CS4_BASE_ADDR (SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000
#endif /* _PCI_SH7780_H_ */