hwmon: (pmbus/ucd9000) Add support for UCD90320 Power Sequencer
Add support for the UCD90320 chip and its expanded set of GPIO pins. Signed-off-by: Jim Wright <wrightj@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20191205232411.21492-3-wrightj@linux.vnet.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Jim Wright
Guenter Roeck
Родитель
8a36e38d8b
Коммит
a470f11c5b
|
|
@ -3,9 +3,10 @@ Kernel driver ucd9000
|
|||
|
||||
Supported chips:
|
||||
|
||||
* TI UCD90120, UCD90124, UCD90160, UCD9090, and UCD90910
|
||||
* TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, and UCD90910
|
||||
|
||||
Prefixes: 'ucd90120', 'ucd90124', 'ucd90160', 'ucd9090', 'ucd90910'
|
||||
Prefixes: 'ucd90120', 'ucd90124', 'ucd90160', 'ucd90320', 'ucd9090',
|
||||
'ucd90910'
|
||||
|
||||
Addresses scanned: -
|
||||
|
||||
|
|
@ -14,6 +15,7 @@ Supported chips:
|
|||
- http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
|
||||
- http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
|
||||
- http://focus.ti.com/lit/ds/symlink/ucd90160.pdf
|
||||
- http://focus.ti.com/lit/ds/symlink/ucd90320.pdf
|
||||
- http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
|
||||
- http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
|
||||
|
||||
|
|
@ -45,6 +47,12 @@ power-on reset signals, external interrupts, cascading, or other system
|
|||
functions. Twelve of these pins offer PWM functionality. Using these pins, the
|
||||
UCD90160 offers support for margining, and general-purpose PWM functions.
|
||||
|
||||
The UCD90320 is a 32-rail PMBus/I2C addressable power-supply sequencer and
|
||||
monitor. The 24 integrated ADC channels (AMONx) monitor the power supply
|
||||
voltage, current, and temperature. Of the 84 GPIO pins, 8 can be used as
|
||||
digital monitors (DMONx), 32 to enable the power supply (ENx), 24 for margining
|
||||
(MARx), 16 for logical GPO, and 32 GPIs for cascading, and system function.
|
||||
|
||||
The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and
|
||||
monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply
|
||||
voltage inputs. Twenty-three GPIO pins can be used for power supply enables,
|
||||
|
|
|
|||
|
|
@ -209,11 +209,11 @@ config SENSORS_TPS53679
|
|||
be called tps53679.
|
||||
|
||||
config SENSORS_UCD9000
|
||||
tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910"
|
||||
tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910"
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for TI
|
||||
UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System
|
||||
Health Controllers.
|
||||
UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910, Sequencer
|
||||
and System Health Controllers.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called ucd9000.
|
||||
|
|
|
|||
|
|
@ -18,7 +18,8 @@
|
|||
#include <linux/gpio/driver.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
|
||||
enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd90320, ucd9090,
|
||||
ucd90910 };
|
||||
|
||||
#define UCD9000_MONITOR_CONFIG 0xd5
|
||||
#define UCD9000_NUM_PAGES 0xd6
|
||||
|
|
@ -38,7 +39,7 @@ enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
|
|||
#define UCD9000_GPIO_OUTPUT 1
|
||||
|
||||
#define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07)
|
||||
#define UCD9000_MON_PAGE(x) ((x) & 0x0f)
|
||||
#define UCD9000_MON_PAGE(x) ((x) & 0x1f)
|
||||
|
||||
#define UCD9000_MON_VOLTAGE 1
|
||||
#define UCD9000_MON_TEMPERATURE 2
|
||||
|
|
@ -50,10 +51,12 @@ enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
|
|||
#define UCD9000_GPIO_NAME_LEN 16
|
||||
#define UCD9090_NUM_GPIOS 23
|
||||
#define UCD901XX_NUM_GPIOS 26
|
||||
#define UCD90320_NUM_GPIOS 84
|
||||
#define UCD90910_NUM_GPIOS 26
|
||||
|
||||
#define UCD9000_DEBUGFS_NAME_LEN 24
|
||||
#define UCD9000_GPI_COUNT 8
|
||||
#define UCD90320_GPI_COUNT 32
|
||||
|
||||
struct ucd9000_data {
|
||||
u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
|
||||
|
|
@ -131,6 +134,7 @@ static const struct i2c_device_id ucd9000_id[] = {
|
|||
{"ucd90120", ucd90120},
|
||||
{"ucd90124", ucd90124},
|
||||
{"ucd90160", ucd90160},
|
||||
{"ucd90320", ucd90320},
|
||||
{"ucd9090", ucd9090},
|
||||
{"ucd90910", ucd90910},
|
||||
{}
|
||||
|
|
@ -154,6 +158,10 @@ static const struct of_device_id __maybe_unused ucd9000_of_match[] = {
|
|||
.compatible = "ti,ucd90160",
|
||||
.data = (void *)ucd90160
|
||||
},
|
||||
{
|
||||
.compatible = "ti,ucd90320",
|
||||
.data = (void *)ucd90320
|
||||
},
|
||||
{
|
||||
.compatible = "ti,ucd9090",
|
||||
.data = (void *)ucd9090
|
||||
|
|
@ -322,6 +330,9 @@ static void ucd9000_probe_gpio(struct i2c_client *client,
|
|||
case ucd90160:
|
||||
data->gpio.ngpio = UCD901XX_NUM_GPIOS;
|
||||
break;
|
||||
case ucd90320:
|
||||
data->gpio.ngpio = UCD90320_NUM_GPIOS;
|
||||
break;
|
||||
case ucd90910:
|
||||
data->gpio.ngpio = UCD90910_NUM_GPIOS;
|
||||
break;
|
||||
|
|
@ -372,17 +383,18 @@ static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val)
|
|||
struct ucd9000_debugfs_entry *entry = data;
|
||||
struct i2c_client *client = entry->client;
|
||||
u8 buffer[I2C_SMBUS_BLOCK_MAX];
|
||||
int ret;
|
||||
int ret, i;
|
||||
|
||||
ret = ucd9000_get_mfr_status(client, buffer);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Attribute only created for devices with gpi fault bits at bits
|
||||
* 16-23, which is the second byte of the response.
|
||||
* GPI fault bits are in sets of 8, two bytes from end of response.
|
||||
*/
|
||||
*val = !!(buffer[1] & BIT(entry->index));
|
||||
i = ret - 3 - entry->index / 8;
|
||||
if (i >= 0)
|
||||
*val = !!(buffer[i] & BIT(entry->index % 8));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -422,7 +434,7 @@ static int ucd9000_init_debugfs(struct i2c_client *client,
|
|||
{
|
||||
struct dentry *debugfs;
|
||||
struct ucd9000_debugfs_entry *entries;
|
||||
int i;
|
||||
int i, gpi_count;
|
||||
char name[UCD9000_DEBUGFS_NAME_LEN];
|
||||
|
||||
debugfs = pmbus_get_debugfs_dir(client);
|
||||
|
|
@ -435,18 +447,21 @@ static int ucd9000_init_debugfs(struct i2c_client *client,
|
|||
|
||||
/*
|
||||
* Of the chips this driver supports, only the UCD9090, UCD90160,
|
||||
* and UCD90910 report GPI faults in their MFR_STATUS register, so only
|
||||
* create the GPI fault debugfs attributes for those chips.
|
||||
* UCD90320, and UCD90910 report GPI faults in their MFR_STATUS
|
||||
* register, so only create the GPI fault debugfs attributes for those
|
||||
* chips.
|
||||
*/
|
||||
if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 ||
|
||||
mid->driver_data == ucd90910) {
|
||||
mid->driver_data == ucd90320 || mid->driver_data == ucd90910) {
|
||||
gpi_count = mid->driver_data == ucd90320 ? UCD90320_GPI_COUNT
|
||||
: UCD9000_GPI_COUNT;
|
||||
entries = devm_kcalloc(&client->dev,
|
||||
UCD9000_GPI_COUNT, sizeof(*entries),
|
||||
gpi_count, sizeof(*entries),
|
||||
GFP_KERNEL);
|
||||
if (!entries)
|
||||
return -ENOMEM;
|
||||
|
||||
for (i = 0; i < UCD9000_GPI_COUNT; i++) {
|
||||
for (i = 0; i < gpi_count; i++) {
|
||||
entries[i].client = client;
|
||||
entries[i].index = i;
|
||||
scnprintf(name, UCD9000_DEBUGFS_NAME_LEN,
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче