target/file: Use O_DSYNC by default for FILEIO backends

Convert to use O_DSYNC for all cases at FILEIO backend creation time to
avoid the extra syncing of pure timestamp updates with legacy O_SYNC during
default operation as recommended by hch.  Continue to do this independently of
Write Cache Enable (WCE) bit, as WCE=0 is currently the default for all backend
devices and enabled by user on per device basis via attrib/emulate_write_cache.

This patch drops the now unnecessary fd_buffered_io= token usage that was
originally signalling when to explictly disable O_SYNC at backend creation
time for buffered I/O operation.  This can end up being dangerous for a number
of reasons during physical node failure, so go ahead and drop this option
for now when O_DSYNC is used as the default.

Also allow explict FUA WRITEs -> vfs_fsync_range() call to function in
fd_execute_cmd() independently of WCE bit setting.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

drivers/target/target_core_file.c

@@ -133,16 +133,11 @@ static struct se_device *fd_create_virtdevice(
 		ret = PTR_ERR(dev_p);
 		goto fail;
 	}
-
-	/* O_DIRECT too? */
-	flags = O_RDWR | O_CREAT | O_LARGEFILE;
-
 	/*
-	 * If fd_buffered_io=1 has not been set explicitly (the default),
-	 * use O_SYNC to force FILEIO writes to disk.
+	 * Use O_DSYNC by default instead of O_SYNC to forgo syncing
+	 * of pure timestamp updates.
 	 */
-	if (!(fd_dev->fbd_flags & FDBD_USE_BUFFERED_IO))
-		flags |= O_SYNC;
+	flags = O_RDWR | O_CREAT | O_LARGEFILE | O_DSYNC;
 
 	file = filp_open(dev_p, flags, 0600);
 	if (IS_ERR(file)) {
@@ -380,23 +375,6 @@ static void fd_emulate_sync_cache(struct se_cmd *cmd)
 	}
 }
 
-static void fd_emulate_write_fua(struct se_cmd *cmd)
-{
-	struct se_device *dev = cmd->se_dev;
-	struct fd_dev *fd_dev = dev->dev_ptr;
-	loff_t start = cmd->t_task_lba *
-		dev->se_sub_dev->se_dev_attrib.block_size;
-	loff_t end = start + cmd->data_length;
-	int ret;
-
-	pr_debug("FILEIO: FUA WRITE LBA: %llu, bytes: %u\n",
-		cmd->t_task_lba, cmd->data_length);
-
-	ret = vfs_fsync_range(fd_dev->fd_file, start, end, 1);
-	if (ret != 0)
-		pr_err("FILEIO: vfs_fsync_range() failed: %d\n", ret);
-}
-
 static int fd_execute_cmd(struct se_cmd *cmd, struct scatterlist *sgl,
 		u32 sgl_nents, enum dma_data_direction data_direction)
 {
@@ -411,19 +389,21 @@ static int fd_execute_cmd(struct se_cmd *cmd, struct scatterlist *sgl,
 		ret = fd_do_readv(cmd, sgl, sgl_nents);
 	} else {
 		ret = fd_do_writev(cmd, sgl, sgl_nents);
-
+		/*
+		 * Perform implict vfs_fsync_range() for fd_do_writev() ops
+		 * for SCSI WRITEs with Forced Unit Access (FUA) set.
+		 * Allow this to happen independent of WCE=0 setting.
+		 */
 		if (ret > 0 &&
-		    dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0 &&
 		    dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0 &&
 		    (cmd->se_cmd_flags & SCF_FUA)) {
-			/*
-			 * We might need to be a bit smarter here
-			 * and return some sense data to let the initiator
-			 * know the FUA WRITE cache sync failed..?
-			 */
-			fd_emulate_write_fua(cmd);
-		}
+			struct fd_dev *fd_dev = dev->dev_ptr;
+			loff_t start = cmd->t_task_lba *
+				dev->se_sub_dev->se_dev_attrib.block_size;
+			loff_t end = start + cmd->data_length;
 
+			vfs_fsync_range(fd_dev->fd_file, start, end, 1);
+		}
 	}
 
 	if (ret < 0) {
@@ -442,7 +422,6 @@ enum {
 static match_table_t tokens = {
 	{Opt_fd_dev_name, "fd_dev_name=%s"},
 	{Opt_fd_dev_size, "fd_dev_size=%s"},
-	{Opt_fd_buffered_io, "fd_buffered_io=%d"},
 	{Opt_err, NULL}
 };
 
@@ -454,7 +433,7 @@ static ssize_t fd_set_configfs_dev_params(
 	struct fd_dev *fd_dev = se_dev->se_dev_su_ptr;
 	char *orig, *ptr, *arg_p, *opts;
 	substring_t args[MAX_OPT_ARGS];
-	int ret = 0, arg, token;
+	int ret = 0, token;
 
 	opts = kstrdup(page, GFP_KERNEL);
 	if (!opts)
@@ -498,19 +477,6 @@ static ssize_t fd_set_configfs_dev_params(
 					" bytes\n", fd_dev->fd_dev_size);
 			fd_dev->fbd_flags |= FBDF_HAS_SIZE;
 			break;
-		case Opt_fd_buffered_io:
-			match_int(args, &arg);
-			if (arg != 1) {
-				pr_err("bogus fd_buffered_io=%d value\n", arg);
-				ret = -EINVAL;
-				goto out;
-			}
-
-			pr_debug("FILEIO: Using buffered I/O"
-				" operations for struct fd_dev\n");
-
-			fd_dev->fbd_flags |= FDBD_USE_BUFFERED_IO;
-			break;
 		default:
 			break;
 		}
@@ -542,10 +508,8 @@ static ssize_t fd_show_configfs_dev_params(
 	ssize_t bl = 0;
 
 	bl = sprintf(b + bl, "TCM FILEIO ID: %u", fd_dev->fd_dev_id);
-	bl += sprintf(b + bl, "        File: %s  Size: %llu  Mode: %s\n",
-		fd_dev->fd_dev_name, fd_dev->fd_dev_size,
-		(fd_dev->fbd_flags & FDBD_USE_BUFFERED_IO) ?
-		"Buffered" : "Synchronous");
+	bl += sprintf(b + bl, "        File: %s  Size: %llu  Mode: O_DSYNC\n",
+		fd_dev->fd_dev_name, fd_dev->fd_dev_size);
 	return bl;
 }
 

drivers/target/target_core_file.h

@@ -14,7 +14,6 @@
 
 #define FBDF_HAS_PATH		0x01
 #define FBDF_HAS_SIZE		0x02
-#define FDBD_USE_BUFFERED_IO	0x04
 
 struct fd_dev {
 	u32		fbd_flags;