mwifiex: update MCS information as per antenna settings

Even if the device is changed to 1X1 mode, data is sent with
higher MCS rates after association.

This patch fixes the problem by updating MCS information field
in HT capability when antenna setting changes so that correct
information will be advertised in association and probe request.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/mwifiex/cfg80211.c

@@ -1324,6 +1324,33 @@ mwifiex_cfg80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
 			tx_ant = RF_ANTENNA_AUTO;
 			rx_ant = RF_ANTENNA_AUTO;
 		}
+	} else {
+		struct ieee80211_sta_ht_cap *ht_info;
+		int rx_mcs_supp;
+		enum ieee80211_band band;
+
+		if ((tx_ant == 0x1 && rx_ant == 0x1)) {
+			adapter->user_dev_mcs_support = HT_STREAM_1X1;
+			if (adapter->is_hw_11ac_capable)
+				adapter->usr_dot_11ac_mcs_support =
+						MWIFIEX_11AC_MCS_MAP_1X1;
+		} else {
+			adapter->user_dev_mcs_support = HT_STREAM_2X2;
+			if (adapter->is_hw_11ac_capable)
+				adapter->usr_dot_11ac_mcs_support =
+						MWIFIEX_11AC_MCS_MAP_2X2;
+		}
+
+		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+			if (!adapter->wiphy->bands[band])
+				continue;
+
+			ht_info = &adapter->wiphy->bands[band]->ht_cap;
+			rx_mcs_supp =
+				GET_RXMCSSUPP(adapter->user_dev_mcs_support);
+			memset(&ht_info->mcs, 0, adapter->number_of_antenna);
+			memset(&ht_info->mcs, 0xff, rx_mcs_supp);
+		}
 	}
 
 	ant_cfg.tx_ant = tx_ant;
@@ -2093,8 +2120,8 @@ mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
 	ht_info->cap &= ~IEEE80211_HT_CAP_MAX_AMSDU;
 	ht_info->cap |= IEEE80211_HT_CAP_SM_PS;
 
-	rx_mcs_supp = GET_RXMCSSUPP(adapter->hw_dev_mcs_support);
-	/* Set MCS for 1x1 */
+	rx_mcs_supp = GET_RXMCSSUPP(adapter->user_dev_mcs_support);
+	/* Set MCS for 1x1/2x2 */
 	memset(mcs, 0xff, rx_mcs_supp);
 	/* Clear all the other values */
 	memset(&mcs[rx_mcs_supp], 0,

drivers/net/wireless/mwifiex/cfp.c

@@ -253,7 +253,7 @@ u32 mwifiex_index_to_data_rate(struct mwifiex_private *priv,
 			       u8 index, u8 ht_info)
 {
 	u32 mcs_num_supp =
-		(priv->adapter->hw_dev_mcs_support == HT_STREAM_2X2) ? 16 : 8;
+		(priv->adapter->user_dev_mcs_support == HT_STREAM_2X2) ? 16 : 8;
 	u32 rate;
 
 	if (priv->adapter->is_hw_11ac_capable)

drivers/net/wireless/mwifiex/cmdevt.c

@@ -1592,6 +1592,7 @@ int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv,
 
 	adapter->hw_dot_11n_dev_cap = le32_to_cpu(hw_spec->dot_11n_dev_cap);
 	adapter->hw_dev_mcs_support = hw_spec->dev_mcs_support;
+	adapter->user_dev_mcs_support = adapter->hw_dev_mcs_support;
 
 	if (adapter->if_ops.update_mp_end_port)
 		adapter->if_ops.update_mp_end_port(adapter,

drivers/net/wireless/mwifiex/fw.h

@@ -236,8 +236,21 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
  */
 #define MWIFIEX_FW_DEF_HTTXCFG (BIT(1) | BIT(4) | BIT(5) | BIT(6))
 
+/* 11AC Tx and Rx MCS map for 1x1 mode:
+ * IEEE80211_VHT_MCS_SUPPORT_0_9 for stream 1
+ * IEEE80211_VHT_MCS_NOT_SUPPORTED for remaining 7 streams
+ */
+#define MWIFIEX_11AC_MCS_MAP_1X1	0xfffefffe
+
+/* 11AC Tx and Rx MCS map for 2x2 mode:
+ * IEEE80211_VHT_MCS_SUPPORT_0_9 for stream 1 and 2
+ * IEEE80211_VHT_MCS_NOT_SUPPORTED for remaining 6 streams
+ */
+#define MWIFIEX_11AC_MCS_MAP_2X2	0xfffafffa
+
 #define GET_RXMCSSUPP(DevMCSSupported) (DevMCSSupported & 0x0f)
 #define SETHT_MCS32(x) (x[4] |= 1)
+#define HT_STREAM_1X1	0x11
 #define HT_STREAM_2X2	0x22
 
 #define SET_SECONDARYCHAN(RadioType, SECCHAN) (RadioType |= (SECCHAN << 4))

drivers/net/wireless/mwifiex/main.h

@@ -773,6 +773,7 @@ struct mwifiex_adapter {
 	u8 event_body[MAX_EVENT_SIZE];
 	u32 hw_dot_11n_dev_cap;
 	u8 hw_dev_mcs_support;
+	u8 user_dev_mcs_support;
 	u8 adhoc_11n_enabled;
 	u8 sec_chan_offset;
 	struct mwifiex_dbg dbg;