microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: SoC cleanups for v4.4 

Again we have a sizable (but not huge) cleanup branch with a net delta of about
 -3k lines.
 
 Main contents here is:
 
  - A bunch of development/cleanup of a few PXA boards
  - Removal of bockw platforms on shmobile, since the platform has now gone
    completely multiplatform. Whee!
  - move of the 32kHz timer on OMAP to a proper timesource
  - Misc cleanup of older OMAP material (incl removal of one board file)
  - Switch over to new common PWM lookup support for several platforms
 
 There's also a handful of other cleanups across the tree, but the above are
 the major pieces.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQCN8AAoJEIwa5zzehBx3WWUP/1uX+W9QDC3H1qrlVbHZRjGB
 ytvg/q/6pL9teBF4Dga2MAAKLTUomSLWL6xJGhsIUZJjgyik5KjbTMy6SJukk7VA
 R04nQ9oSYeaWP61X5glE6SndrKGBemfFUZ1+e6OKWEBSu9ScU678PfOcyzvOgILA
 +nE+13uGwSkIGTxLHGSHPFjj1/If/lZovb3MCAqXs76Hw/GkRN9jPvQrimJY/ndI
 ZqDDQEJzriB5BKpKMRfF+bwTRZzTKTv/pyvz8kfTzjs1u8DQ7zwNA2do3hm7iGRt
 Kf0OZZCRIyDIEXUQwUgr9KNasHLf+IH5A0edRUbP4gmMo3REiwCgkPhXXgbmR0pn
 +xtDHkMHg+KAWJYyeEJBCgwiOCZFpTw4fVKbq3aaOR7yagK9y0jdcFtid8BL0bfa
 iTauKpbApVlBG5EEjSNJSuIeeDzPsSf3mgLGQtZNyuR6XGMPj2cDzSrm94vnjuVJ
 4gxslILTHtqpqg6jEsHZa/Ptd8G3VYQbja6MOvIsf0O8AULo8YpSU3P4RUbzX4Pq
 mUAFKzh9BuaSAMcLmwXCjy40f2DuzKTQUb2FkNFeompLGeCxTUh/2kuEJ9mxN5TB
 MstLTyqW2/Zu5RFnVUaI/G1vOkZ4ZDJeJIwPolG13ZwlCoTpnkWvLjJAVjChbpEX
 0iBistrj5vXEFrjsAz6c
 =uI7R
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "Again we have a sizable (but not huge) cleanup branch with a net delta
  of about -3k lines.

  Main contents here is:

   - A bunch of development/cleanup of a few PXA boards
   - Removal of bockw platforms on shmobile, since the platform has now
     gone completely multiplatform.  Whee!
   - move of the 32kHz timer on OMAP to a proper timesource
   - Misc cleanup of older OMAP material (incl removal of one board
     file)
   - Switch over to new common PWM lookup support for several platforms

  There's also a handful of other cleanups across the tree, but the
  above are the major pieces"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits)
  ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs
  ARM: DRA7: hwmod data: Remove spinlock hwmod addrs
  ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs
  ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data
  ARM: Remove __ref on hotplug cpu die path
  ARM: Remove open-coded version of IRQCHIP_DECLARE
  arm: omap2: board-generic: use omap4_local_timer_init for AM437x
  ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data
  ARM: OMAP: Remove duplicated operand in OR operation
  clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE
  ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
  ARM: pxa: raumfeld: make some variables static
  ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c
  ARM: OMAP2+: Rename cpu_is macros to soc_is
  arm: omap2: timer: limit hwmod usage to non-DT boots
  arm: omap2+: select 32k clocksource driver
  clocksource: add TI 32.768 Hz counter driver
  arm: omap2: timer: rename omap_sync32k_timer_init()
  arm: omap2: timer: always call clocksource_of_init() when DT
  arm: omap2: timer: move realtime_counter_init() around
  ...
This commit is contained in:
Linus Torvalds 2015-11-10 14:48:36 -08:00
Родитель 64fd8c8a0f d3dc3df633
Коммит a5e1d715a8
98 изменённых файлов: 1002 добавлений и 4433 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

6
Documentation/devicetree/bindings/arm/shmobile.txt
Просмотреть файл

@ -39,8 +39,6 @@ Boards:
compatible = "renesas,armadillo800eva"
- BOCK-W
compatible = "renesas,bockw", "renesas,r8a7778"
- BOCK-W - Reference Device Tree Implementation
compatible = "renesas,bockw-reference", "renesas,r8a7778"
- Genmai (RTK772100BC00000BR)
compatible = "renesas,genmai", "renesas,r7s72100"
- Gose
@ -57,7 +55,3 @@ Boards:
compatible = "renesas,lager", "renesas,r8a7790"
- Marzen
compatible = "renesas,marzen", "renesas,r8a7779"
Note: Reference Device Tree Implementations are temporary implementations
to ease the migration from platform devices to Device Tree, and are
intended to be removed in the future.

6
Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt
Просмотреть файл

@ -24,9 +24,9 @@ Required properties:
Optional properties:
- interrupts: Must contain a list of interrupt specifiers for memory
controller interrupts, if available.
- interrupts-names: Must contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
Valid interrupt names are:
- interrupt-names: Must contain a list of interrupt names corresponding to
the interrupts in the interrupts property, if available.
Valid interrupt names are:
- "sec" (secure interrupt)
- "temp" (normal (temperature) interrupt)
- power-domains: Must contain a reference to the PM domain that the memory

6
Documentation/spi/pxa2xx
Просмотреть файл

@ -22,15 +22,10 @@ Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
found in include/linux/spi/pxa2xx_spi.h:
struct pxa2xx_spi_master {
u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;
};
The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the
corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See
the "PXA2xx Developer Manual" section "Clocks and Power Management".
The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
slave device (chips) attached to this SPI master.
@ -57,7 +52,6 @@ static struct resource pxa_spi_nssp_resources[] = {
};
static struct pxa2xx_spi_master pxa_nssp_master_info = {
.clock_enable = CKEN_NSSP, /* NSSP Peripheral clock */
.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
.enable_dma = 1, /* Enables NSSP DMA */
};

2
MAINTAINERS
Просмотреть файл

@ -1516,8 +1516,6 @@ F: arch/arm/boot/dts/emev2*
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
F: arch/arm/configs/bockw_defconfig
F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/include/debug/renesas-scif.S
F: arch/arm/mach-shmobile/

26
arch/arm/Kconfig
Просмотреть файл

@ -621,28 +621,6 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_SHMOBILE_LEGACY
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
select ARM_PATCH_PHYS_VIRT if MMU
select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select MULTI_IRQ_HANDLER
select NO_IOPORT_MAP
select PINCTRL
select PM_GENERIC_DOMAINS if PM
select SH_CLK_CPG
select SPARSE_IRQ
help
Support for Renesas ARM SoC platforms using a non-multiplatform
kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
and RZ families.
config ARCH_RPC
bool "RiscPC"
depends on MMU
@ -1537,7 +1515,6 @@ config HZ_FIXED
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
default 128 if SOC_AT91RM9200
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
choice
@ -1756,8 +1733,7 @@ config ARM_MODULE_PLTS
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
range 11 64 if ARCH_SHMOBILE_LEGACY
int "Maximum zone order"
default "12" if SOC_AM33XX
default "9" if SA1111 || ARCH_EFM32
default "11"

3
arch/arm/Kconfig.debug
Просмотреть файл

@ -1621,8 +1621,7 @@ config DEBUG_UNCOMPRESS
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
ARCH_SHMOBILE_LEGACY
PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
default "mach/uncompress.h"
config EARLY_PRINTK

3
arch/arm/boot/dts/Makefile
Просмотреть файл

@ -522,9 +522,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
emev2-kzm9d.dtb \
r7s72100-genmai.dtb \

8
arch/arm/boot/dts/efm32gg-dk3750.dts
Просмотреть файл

@ -26,7 +26,7 @@
};
i2c@4000a000 {
efm32,location = <3>;
energymicro,location = <3>;
status = "ok";
temp@48 {
@ -43,7 +43,7 @@
spi0: spi@4000c000 { /* USART0 */
cs-gpios = <&gpio 68 1>; // E4
location = <1>;
energymicro,location = <1>;
status = "ok";
microsd@0 {
@ -57,7 +57,7 @@
spi1: spi@4000c400 { /* USART1 */
cs-gpios = <&gpio 51 1>; // D3
location = <1>;
energymicro,location = <1>;
status = "ok";
ks8851@0 {
@ -70,7 +70,7 @@
};
uart4: uart@4000e400 { /* UART1 */
location = <2>;
energymicro,location = <2>;
status = "ok";
};

32
arch/arm/boot/dts/efm32gg.dtsi
Просмотреть файл

@ -23,7 +23,7 @@
soc {
adc: adc@40002000 {
compatible = "efm32,adc";
compatible = "energymicro,efm32-adc";
reg = <0x40002000 0x400>;
interrupts = <7>;
clocks = <&cmu clk_HFPERCLKADC0>;
@ -31,7 +31,7 @@
};
gpio: gpio@40006000 {
compatible = "efm32,gpio";
compatible = "energymicro,efm32-gpio";
reg = <0x40006000 0x1000>;
interrupts = <1 11>;
gpio-controller;
@ -45,7 +45,7 @@
i2c0: i2c@4000a000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "efm32,i2c";
compatible = "energymicro,efm32-i2c";
reg = <0x4000a000 0x400>;
interrupts = <9>;
clocks = <&cmu clk_HFPERCLKI2C0>;
@ -56,7 +56,7 @@
i2c1: i2c@4000a400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "efm32,i2c";
compatible = "energymicro,efm32-i2c";
reg = <0x4000a400 0x400>;
interrupts = <10>;
clocks = <&cmu clk_HFPERCLKI2C1>;
@ -67,7 +67,7 @@
spi0: spi@4000c000 { /* USART0 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "efm32,spi";
compatible = "energymicro,efm32-spi";
reg = <0x4000c000 0x400>;
interrupts = <3 4>;
clocks = <&cmu clk_HFPERCLKUSART0>;
@ -77,7 +77,7 @@
spi1: spi@4000c400 { /* USART1 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "efm32,spi";
compatible = "energymicro,efm32-spi";
reg = <0x4000c400 0x400>;
interrupts = <15 16>;
clocks = <&cmu clk_HFPERCLKUSART1>;
@ -87,7 +87,7 @@
spi2: spi@4000c800 { /* USART2 */
#address-cells = <1>;
#size-cells = <0>;
compatible = "efm32,spi";
compatible = "energymicro,efm32-spi";
reg = <0x4000c800 0x400>;
interrupts = <18 19>;
clocks = <&cmu clk_HFPERCLKUSART2>;
@ -95,7 +95,7 @@
};
uart0: uart@4000c000 { /* USART0 */
compatible = "efm32,uart";
compatible = "energymicro,efm32-uart";
reg = <0x4000c000 0x400>;
interrupts = <3 4>;
clocks = <&cmu clk_HFPERCLKUSART0>;
@ -103,7 +103,7 @@
};
uart1: uart@4000c400 { /* USART1 */
compatible = "efm32,uart";
compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>;
interrupts = <15 16>;
clocks = <&cmu clk_HFPERCLKUSART1>;
@ -111,7 +111,7 @@
};
uart2: uart@4000c800 { /* USART2 */
compatible = "efm32,uart";
compatible = "energymicro,efm32-uart";
reg = <0x4000c800 0x400>;
interrupts = <18 19>;
clocks = <&cmu clk_HFPERCLKUSART2>;
@ -119,7 +119,7 @@
};
uart3: uart@4000e000 { /* UART0 */
compatible = "efm32,uart";
compatible = "energymicro,efm32-uart";
reg = <0x4000e000 0x400>;
interrupts = <20 21>;
clocks = <&cmu clk_HFPERCLKUART0>;
@ -127,7 +127,7 @@
};
uart4: uart@4000e400 { /* UART1 */
compatible = "efm32,uart";
compatible = "energymicro,efm32-uart";
reg = <0x4000e400 0x400>;
interrupts = <22 23>;
clocks = <&cmu clk_HFPERCLKUART1>;
@ -135,28 +135,28 @@
};
timer0: timer@40010000 {
compatible = "efm32,timer";
compatible = "energymicro,efm32-timer";
reg = <0x40010000 0x400>;
interrupts = <2>;
clocks = <&cmu clk_HFPERCLKTIMER0>;
};
timer1: timer@40010400 {
compatible = "efm32,timer";
compatible = "energymicro,efm32-timer";
reg = <0x40010400 0x400>;
interrupts = <12>;
clocks = <&cmu clk_HFPERCLKTIMER1>;
};
timer2: timer@40010800 {
compatible = "efm32,timer";
compatible = "energymicro,efm32-timer";
reg = <0x40010800 0x400>;
interrupts = <13>;
clocks = <&cmu clk_HFPERCLKTIMER2>;
};
timer3: timer@40010c00 {
compatible = "efm32,timer";
compatible = "energymicro,efm32-timer";
reg = <0x40010c00 0x400>;
interrupts = <14>;
clocks = <&cmu clk_HFPERCLKTIMER3>;

139
arch/arm/boot/dts/r8a7778-bockw-reference.dts
Просмотреть файл

@ -1,139 +0,0 @@
/*
* Reference Device Tree Source for the Bock-W board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* based on r8a7779
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
#include "r8a7778.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
model = "bockw";
compatible = "renesas,bockw-reference", "renesas,r8a7778";
aliases {
serial0 = &scif0;
};
chosen {
bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
stdout-path = &scif0;
};
memory {
device_type = "memory";
reg = <0x60000000 0x10000000>;
};
fixedregulator3v3: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ethernet@18300000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x18300000 0x1000>;
phy-mode = "mii";
interrupt-parent = <&irqpin>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
reg-io-width = <4>;
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
};
};
&mmcif {
pinctrl-0 = <&mmc_pins>;
pinctrl-names = "default";
vmmc-supply = <&fixedregulator3v3>;
bus-width = <8>;
broken-cd;
status = "okay";
};
&irqpin {
status = "okay";
};
&tmu0 {
status = "okay";
};
&pfc {
scif0_pins: serial0 {
renesas,groups = "scif0_data_a", "scif0_ctrl";
renesas,function = "scif0";
};
mmc_pins: mmc {
renesas,groups = "mmc_data8", "mmc_ctrl";
renesas,function = "mmc";
};
sdhi0_pins: sd0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
"sdhi0_cd";
renesas,function = "sdhi0";
};
hspi0_pins: hspi0 {
renesas,groups = "hspi0_a";
renesas,function = "hspi0";
};
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
vmmc-supply = <&fixedregulator3v3>;
bus-width = <4>;
status = "okay";
wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
};
&hspi0 {
pinctrl-0 = <&hspi0_pins>;
pinctrl-names = "default";
status = "okay";
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl008k", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
partition@0 {
label = "data(spi)";
reg = <0x00000000 0x00100000>;
};
};
};
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
status = "okay";
};

133
arch/arm/configs/bockw_defconfig
Просмотреть файл

@ -1,133 +0,0 @@
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_KERNEL_LZMA=y
CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R8A7778=y
CONFIG_MACH_BOCKW=y
CONFIG_MEMORY_START=0x60000000
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_SHMOBILE_TIMER_HZ=1024
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_458693=y
CONFIG_ARM_ERRATA_460075=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_I2C=y
CONFIG_I2C_RCAR=y
CONFIG_GPIO_RCAR=y
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_VIDEO_RCAR_VIN=y
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ML86V7667=y
CONFIG_SPI=y
CONFIG_SPI_SH_HSPI=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_RCAR=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_RCAR_PHY=y
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_DMADEVICES=y
CONFIG_RCAR_HPB_DMAE=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_ROOT_NFS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_AVERAGE=y

4
arch/arm/kernel/psci_smp.c
Просмотреть файл

@ -71,7 +71,7 @@ int psci_cpu_disable(unsigned int cpu)
return 0;
}
void __ref psci_cpu_die(unsigned int cpu)
void psci_cpu_die(unsigned int cpu)
{
u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN <<
PSCI_0_2_POWER_STATE_TYPE_SHIFT;
@ -83,7 +83,7 @@ void __ref psci_cpu_die(unsigned int cpu)
panic("psci: cpu %d failed to shutdown\n", cpu);
}
int __ref psci_cpu_kill(unsigned int cpu)
int psci_cpu_kill(unsigned int cpu)
{
int err, i;

3
arch/arm/mach-exynos/suspend.c
Просмотреть файл

@ -19,6 +19,7 @@
#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/err.h>
@ -265,7 +266,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
return 0;
}
#define EXYNOS_PMU_IRQ(symbol, name) OF_DECLARE_2(irqchip, symbol, name, exynos_pmu_irq_init)
#define EXYNOS_PMU_IRQ(symbol, name) IRQCHIP_DECLARE(symbol, name, exynos_pmu_irq_init)
EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");

8
arch/arm/mach-imx/gpc.c
Просмотреть файл

@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@ -271,12 +272,7 @@ static int __init imx_gpc_init(struct device_node *node,
return 0;
}
/*
* We cannot use the IRQCHIP_DECLARE macro that lives in
* drivers/irqchip, so we're forced to roll our own. Not very nice.
*/
OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
void __init imx_gpc_check_dt(void)
{

35
arch/arm/mach-mvebu/board-v7.c
Просмотреть файл

@ -22,7 +22,6 @@
#include <linux/dma-mapping.h>
#include <linux/memblock.h>
#include <linux/mbus.h>
#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/irqchip.h>
#include <asm/hardware/cache-l2x0.h>
@ -105,27 +104,6 @@ static void __init mvebu_memblock_reserve(void)
static void __init mvebu_memblock_reserve(void) {}
#endif
/*
* Early versions of Armada 375 SoC have a bug where the BootROM
* leaves an external data abort pending. The kernel is hit by this
* data abort as soon as it enters userspace, because it unmasks the
* data aborts at this moment. We register a custom abort handler
* below to ignore the first data abort to work around this
* problem.
*/
static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
static int ignore_first;
if (!ignore_first && fsr == 0x1406) {
ignore_first = 1;
return 0;
}
return 1;
}
static void __init mvebu_init_irq(void)
{
irqchip_init();
@ -134,17 +112,6 @@ static void __init mvebu_init_irq(void)
BUG_ON(mvebu_mbus_dt_init(coherency_available()));
}
static void __init external_abort_quirk(void)
{
u32 dev, rev;
if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
return;
hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
"imprecise external abort");
}
static void __init i2c_quirk(void)
{
struct device_node *np;
@ -177,8 +144,6 @@ static void __init mvebu_dt_init(void)
{
if (of_machine_is_compatible("marvell,armadaxp"))
i2c_quirk();
if (of_machine_is_compatible("marvell,a375-db"))
external_abort_quirk();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}

4
arch/arm/mach-mvebu/pmsu.c
Просмотреть файл

@ -296,11 +296,11 @@ int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
"mrc p15, 0, r0, c1, c0, 0 \n\t"
"tst r0, #(1 << 2) \n\t"
"tst r0, %0 \n\t"
"orreq r0, r0, #(1 << 2) \n\t"
"mcreq p15, 0, r0, c1, c0, 0 \n\t"
"isb "
: : : "r0");
: : "Ir" (CR_C) : "r0");
pr_debug("Failed to suspend the system\n");

7
arch/arm/mach-omap1/Kconfig
Просмотреть файл

@ -90,13 +90,6 @@ config MACH_OMAP_FSAMPLE
Support for TI OMAP 850 F-Sample board. Say Y here if you have such
a board.
config MACH_VOICEBLUE
bool "Voiceblue"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
help
Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
such a board.
config MACH_OMAP_PALMTE
bool "Palm Tungsten E"
depends on ARCH_OMAP1 && ARCH_OMAP15XX

1
arch/arm/mach-omap1/Makefile
Просмотреть файл

@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \
board-nand.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o
obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o

296
arch/arm/mach-omap1/board-voiceblue.c
Просмотреть файл

@ -1,296 +0,0 @@
/*
* linux/arch/arm/mach-omap1/board-voiceblue.c
*
* Modified from board-generic.c
*
* Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
*
* Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mtd/physmap.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/smc91x.h>
#include <linux/export.h>
#include <linux/reboot.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board-voiceblue.h>
#include <mach/flash.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = 3686400,
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = 3686400,
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = 3686400,
},
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = 3686400,
},
{ },
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
};
static int __init ext_uart_init(void)
{
if (!machine_is_voiceblue())
return -ENODEV;
voiceblue_ports[0].irq = gpio_to_irq(12);
voiceblue_ports[1].irq = gpio_to_irq(13);
voiceblue_ports[2].irq = gpio_to_irq(14);
voiceblue_ports[3].irq = gpio_to_irq(15);
serial_device.dev.platform_data = voiceblue_ports;
return platform_device_register(&serial_device);
}
arch_initcall(ext_uart_init);
static struct physmap_flash_data voiceblue_flash_data = {
.width = 2,
.set_vpp = omap1_set_vpp,
};
static struct resource voiceblue_flash_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device voiceblue_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &voiceblue_flash_data,
},
.num_resources = 1,
.resource = &voiceblue_flash_resource,
};
static struct smc91x_platdata voiceblue_smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct resource voiceblue_smc91x_resources[] = {
[0] = {
.start = OMAP_CS2_PHYS + 0x300,
.end = OMAP_CS2_PHYS + 0x300 + 16,
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
static struct platform_device voiceblue_smc91x_device = {
.name = "smc91x",
.id = 0,
.dev = {
.platform_data = &voiceblue_smc91x_info,
},
.num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
.resource = voiceblue_smc91x_resources,
};
static struct platform_device *voiceblue_devices[] __initdata = {
&voiceblue_flash_device,
&voiceblue_smc91x_device,
};
static struct omap_usb_config voiceblue_usb_config __initdata = {
.hmc_mode = 3,
.register_host = 1,
.register_dev = 1,
.pins[0] = 2,
.pins[1] = 6,
.pins[2] = 6,
};
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
static unsigned long machine_state;
static int panic_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
if (test_and_set_bit(MACHINE_PANICED, &machine_state))
return NOTIFY_DONE;
/* Flash power LED */
omap_writeb(0x78, OMAP_LPG1_LCR);
omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
return NOTIFY_DONE;
}
static struct notifier_block panic_block = {
.notifier_call = panic_event,
};
static int __init voiceblue_setup(void)
{
if (!machine_is_voiceblue())
return -ENODEV;
/* Setup panic notifier */
atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
return 0;
}
postcore_initcall(voiceblue_setup);
static int wdt_gpio_state;
void voiceblue_wdt_enable(void)
{
gpio_direction_output(0, 0);
gpio_set_value(0, 1);
gpio_set_value(0, 0);
wdt_gpio_state = 0;
}
void voiceblue_wdt_disable(void)
{
gpio_set_value(0, 0);
gpio_set_value(0, 1);
gpio_set_value(0, 0);
gpio_direction_input(0);
}
void voiceblue_wdt_ping(void)
{
if (test_bit(MACHINE_REBOOT, &machine_state))
return;
wdt_gpio_state = !wdt_gpio_state;
gpio_set_value(0, wdt_gpio_state);
}
static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
{
/*
* Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
* "Global Software Reset Affects Traffic Controller Frequency".
*/
if (cpu_is_omap5912()) {
omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
omap_writew(0x8, ARM_RSTCT1);
}
set_bit(MACHINE_REBOOT, &machine_state);
voiceblue_wdt_enable();
while (1) ;
}
EXPORT_SYMBOL(voiceblue_wdt_enable);
EXPORT_SYMBOL(voiceblue_wdt_disable);
EXPORT_SYMBOL(voiceblue_wdt_ping);
static void __init voiceblue_init(void)
{
/* mux pins for uarts */
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
omap_cfg_reg(UART2_TX);
omap_cfg_reg(UART2_RTS);
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
/* Watchdog */
gpio_request(0, "Watchdog");
/* smc91x reset */
gpio_request(7, "SMC91x reset");
gpio_direction_output(7, 1);
udelay(2); /* wait at least 100ns */
gpio_set_value(7, 0);
mdelay(50); /* 50ms until PHY ready */
/* smc91x interrupt pin */
gpio_request(8, "SMC91x irq");
/* 16C554 reset*/
gpio_request(6, "16C554 reset");
gpio_direction_output(6, 0);
/* 16C554 interrupt pins */
gpio_request(12, "16C554 irq");
gpio_request(13, "16C554 irq");
gpio_request(14, "16C554 irq");
gpio_request(15, "16C554 irq");
irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
omap_serial_init();
omap1_usb_init(&voiceblue_usb_config);
omap_register_i2c_bus(1, 100, NULL, 0);
/* There is a good chance board is going up, so enable power LED
* (it is connected through invertor) */
omap_writeb(0x00, OMAP_LPG1_LCR);
omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
}
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
.handle_irq = omap1_handle_irq,
.init_machine = voiceblue_init,
.init_late = omap1_init_late,
.init_time = omap1_timer_init,
.restart = voiceblue_restart,
MACHINE_END

19
arch/arm/mach-omap1/include/mach/board-voiceblue.h
Просмотреть файл

@ -1,19 +0,0 @@
/*
* Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
*
* Hardware definitions for OMAP5910 based VoiceBlue board.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_VOICEBLUE_H
#define __ASM_ARCH_VOICEBLUE_H
extern void voiceblue_wdt_enable(void);
extern void voiceblue_wdt_disable(void);
extern void voiceblue_wdt_ping(void);
#endif /* __ASM_ARCH_VOICEBLUE_H */

1
arch/arm/mach-omap2/Kconfig
Просмотреть файл

@ -97,6 +97,7 @@ config ARCH_OMAP2PLUS
select PINCTRL
select SOC_BUS
select OMAP_IRQCHIP
select CLKSRC_TI_32K
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5

3
arch/arm/mach-omap2/Makefile
Просмотреть файл

@ -48,11 +48,9 @@ AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec)
# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
AFLAGS_sram242x.o :=-Wa,-march=armv6
AFLAGS_sram243x.o :=-Wa,-march=armv6
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
# Restart code (OMAP4/5 currently in omap4-common.c)
obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
@ -186,7 +184,6 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)

12
arch/arm/mach-omap2/board-generic.c
Просмотреть файл

@ -46,7 +46,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_machine = omap_generic_init,
.init_time = omap2_sync32k_timer_init,
.init_time = omap_init_time,
.dt_compat = omap242x_boards_compat,
.restart = omap2xxx_restart,
MACHINE_END
@ -63,7 +63,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_machine = omap_generic_init,
.init_time = omap2_sync32k_timer_init,
.init_time = omap_init_time,
.dt_compat = omap243x_boards_compat,
.restart = omap2xxx_restart,
MACHINE_END
@ -82,7 +82,7 @@ DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
.init_early = omap3430_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.init_time = omap_init_time,
.dt_compat = n900_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.init_early = omap3430_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.init_time = omap_init_time,
.dt_compat = omap3_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
@ -117,7 +117,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
.init_early = omap3630_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.init_time = omap_init_time,
.dt_compat = omap36xx_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
@ -276,7 +276,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
.init_late = am43xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
.init_time = omap3_gptimer_timer_init,
.init_time = omap4_local_timer_init,
.dt_compat = am43_boards_compat,
.restart = omap44xx_restart,
MACHINE_END

2
arch/arm/mach-omap2/board-ldp.c
Просмотреть файл

@ -424,6 +424,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.init_late = omap3430_init_late,
.init_time = omap3_sync32k_timer_init,
.init_time = omap_init_time,
.restart = omap3xxx_restart,
MACHINE_END

2
arch/arm/mach-omap2/board-rx51.c
Просмотреть файл

@ -136,6 +136,6 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.init_late = omap3430_init_late,
.init_time = omap3_sync32k_timer_init,
.init_time = omap_init_time,
.restart = omap3xxx_restart,
MACHINE_END

122
arch/arm/mach-omap2/clkt34xx_dpll3m2.c
Просмотреть файл

@ -1,122 +0,0 @@
/*
* OMAP34xx M2 divider clock code
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
* Copyright (C) 2007-2010 Nokia Corporation
*
* Paul Walmsley
* Jouni Högander
*
* Parts of this code are based on code written by
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/io.h>
#include "clock.h"
#include "clock3xxx.h"
#include "sdrc.h"
#include "sram.h"
#define CYCLES_PER_MHZ 1000000
struct clk *sdrc_ick_p, *arm_fck_p;
/*
* CORE DPLL (DPLL3) M2 divider rate programming functions
*
* These call into SRAM code to do the actual CM writes, since the SDRAM
* is clocked from DPLL3.
*/
/**
* omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
* @clk: struct clk * of DPLL to set
* @rate: rounded target rate
*
* Program the DPLL M2 divider with the rounded target rate. Returns
* -EINVAL upon error, or 0 upon success.
*/
int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 new_div = 0;
u32 unlock_dll = 0;
u32 c;
unsigned long validrate, sdrcrate, _mpurate;
struct omap_sdrc_params *sdrc_cs0;
struct omap_sdrc_params *sdrc_cs1;
int ret;
unsigned long clkrate;
if (!clk || !rate)
return -EINVAL;
new_div = DIV_ROUND_UP(parent_rate, rate);
validrate = parent_rate / new_div;
if (validrate != rate)
return -EINVAL;
sdrcrate = clk_get_rate(sdrc_ick_p);
clkrate = clk_hw_get_rate(hw);
if (rate > clkrate)
sdrcrate <<= ((rate / clkrate) >> 1);
else
sdrcrate >>= ((clkrate / rate) >> 1);
ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
if (ret)
return -EINVAL;
if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
pr_debug("clock: will unlock SDRC DLL\n");
unlock_dll = 1;
}
/*
* XXX This only needs to be done when the CPU frequency changes
*/
_mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
c += 1; /* for safety */
c *= SDRC_MPURATE_LOOPS;
c >>= SDRC_MPURATE_SCALE;
if (c == 0)
c = 1;
pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
clkrate, validrate);
pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
if (sdrc_cs1)
pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
if (sdrc_cs1)
omap3_configure_core_dpll(
new_div, unlock_dll, c, rate > clkrate,
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
else
omap3_configure_core_dpll(
new_div, unlock_dll, c, rate > clkrate,
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
0, 0, 0, 0);
return 0;
}

3
arch/arm/mach-omap2/common.h
Просмотреть файл

@ -88,8 +88,7 @@ static inline int omap_mux_late_init(void)
extern void omap2_init_common_infrastructure(void);
extern void omap2_sync32k_timer_init(void);
extern void omap3_sync32k_timer_init(void);
extern void omap_init_time(void);
extern void omap3_secure_sync32k_timer_init(void);
extern void omap3_gptimer_timer_init(void);
extern void omap4_local_timer_init(void);

53
arch/arm/mach-omap2/devices.c
Просмотреть файл

@ -33,7 +33,6 @@
#include "common.h"
#include "mux.h"
#include "control.h"
#include "devices.h"
#include "display.h"
#define L3_MODULES_MAX_LEN 12
@ -67,58 +66,6 @@ static int __init omap3_l3_init(void)
}
omap_postcore_initcall(omap3_l3_init);
#if defined(CONFIG_IOMMU_API)
#include <linux/platform_data/iommu-omap.h>
static struct resource omap3isp_resources[] = {
{
.start = OMAP3430_ISP_BASE,
.end = OMAP3430_ISP_BASE + 0x12fc,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_BASE2,
.end = OMAP3430_ISP_BASE2 + 0x0600,
.flags = IORESOURCE_MEM,
},
{
.start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device omap3isp_device = {
.name = "omap3isp",
.id = -1,
.num_resources = ARRAY_SIZE(omap3isp_resources),
.resource = omap3isp_resources,
};
static struct omap_iommu_arch_data omap3_isp_iommu = {
.name = "mmu_isp",
};
int omap3_init_camera(struct isp_platform_data *pdata)
{
if (of_have_populated_dt())
omap3_isp_iommu.name = "480bd400.mmu";
omap3isp_device.dev.platform_data = pdata;
omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
return platform_device_register(&omap3isp_device);
}
#else /* !CONFIG_IOMMU_API */
int omap3_init_camera(struct isp_platform_data *pdata)
{
return 0;
}
#endif
#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{

19
arch/arm/mach-omap2/devices.h
Просмотреть файл

@ -1,19 +0,0 @@
/*
* arch/arm/mach-omap2/devices.h
*
* OMAP2 platform device setup/initialization
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H
#define __ARCH_ARM_MACH_OMAP_DEVICES_H
struct isp_platform_data;
int omap3_init_camera(struct isp_platform_data *pdata);
#endif

30
arch/arm/mach-omap2/id.c
Просмотреть файл

@ -57,15 +57,15 @@ int omap_type(void)
if (val < OMAP2_DEVICETYPE_MASK)
return val;
if (cpu_is_omap24xx()) {
if (soc_is_omap24xx()) {
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
} else if (cpu_is_ti81xx()) {
} else if (soc_is_ti81xx()) {
val = omap_ctrl_readl(TI81XX_CONTROL_STATUS);
} else if (soc_is_am33xx() || soc_is_am43xx()) {
val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
} else if (cpu_is_omap34xx()) {
} else if (soc_is_omap34xx()) {
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
} else if (cpu_is_omap44xx()) {
} else if (soc_is_omap44xx()) {
val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
} else if (soc_is_omap54xx() || soc_is_dra7xx()) {
val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
@ -122,7 +122,7 @@ static u16 tap_prod_id;
void omap_get_die_id(struct omap_die_id *odi)
{
if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
@ -218,17 +218,17 @@ static void __init omap3_cpuinfo(void)
* on available features. Upon detection, update the CPU id
* and CPU class bits.
*/
if (cpu_is_omap3630()) {
if (soc_is_omap3630()) {
cpu_name = "OMAP3630";
} else if (soc_is_am35xx()) {
cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
} else if (soc_is_ti816x()) {
cpu_name = "TI816X";
} else if (soc_is_am335x()) {
cpu_name = "AM335X";
} else if (soc_is_am437x()) {
cpu_name = "AM437x";
} else if (cpu_is_ti814x()) {
} else if (soc_is_ti814x()) {
cpu_name = "TI814X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
@ -275,11 +275,11 @@ void __init omap3xxx_check_features(void)
OMAP3_CHECK_FEATURE(status, SGX);
OMAP3_CHECK_FEATURE(status, NEON);
OMAP3_CHECK_FEATURE(status, ISP);
if (cpu_is_omap3630())
if (soc_is_omap3630())
omap_features |= OMAP3_HAS_192MHZ_CLK;
if (cpu_is_omap3430() || cpu_is_omap3630())
if (soc_is_omap3430() || soc_is_omap3630())
omap_features |= OMAP3_HAS_IO_WAKEUP;
if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
if (soc_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
omap_rev() == OMAP3430_REV_ES3_1_2)
omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
@ -701,7 +701,7 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
tap_base = tap;
/* XXX What is this intended to do? */
if (cpu_is_omap34xx())
if (soc_is_omap34xx())
tap_prod_id = 0x0210;
else
tap_prod_id = 0x0208;
@ -719,11 +719,11 @@ static const char * const omap_types[] = {
static const char * __init omap_get_family(void)
{
if (cpu_is_omap24xx())
if (soc_is_omap24xx())
return kasprintf(GFP_KERNEL, "OMAP2");
else if (cpu_is_omap34xx())
else if (soc_is_omap34xx())
return kasprintf(GFP_KERNEL, "OMAP3");
else if (cpu_is_omap44xx())
else if (soc_is_omap44xx())
return kasprintf(GFP_KERNEL, "OMAP4");
else if (soc_is_omap54xx())
return kasprintf(GFP_KERNEL, "OMAP5");

2
arch/arm/mach-omap2/omap-hotplug.c
Просмотреть файл

@ -27,7 +27,7 @@
* platform-specific code to shutdown a CPU
* Called with IRQs disabled
*/
void __ref omap4_cpu_die(unsigned int cpu)
void omap4_cpu_die(unsigned int cpu)
{
unsigned int boot_cpu = 0;
void __iomem *base = omap_get_wakeupgen_base();

10
arch/arm/mach-omap2/omap-wakeupgen.c
Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
@ -330,7 +331,7 @@ static int irq_cpu_hotplug_notify(struct notifier_block *self,
return NOTIFY_OK;
}
static struct notifier_block __refdata irq_hotplug_notifier = {
static struct notifier_block irq_hotplug_notifier = {
.notifier_call = irq_cpu_hotplug_notify,
};
@ -540,9 +541,4 @@ static int __init wakeupgen_init(struct device_node *node,
return 0;
}
/*
* We cannot use the IRQCHIP_DECLARE macro that lives in
* drivers/irqchip, so we're forced to roll our own. Not very nice.
*/
OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);

20
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
Просмотреть файл

@ -152,20 +152,10 @@ struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
{
.pa_start = 0x48080000,
.pa_end = 0x48080000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
.master = &am33xx_l4_ls_hwmod,
.slave = &am33xx_elm_hwmod,
.clk = "l4ls_gclk",
.addr = am33xx_elm_addr_space,
.user = OCP_USER_MPU,
};
@ -285,20 +275,10 @@ struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
};
/* l3s cfg -> gpmc */
static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
{
.pa_start = 0x50000000,
.pa_end = 0x50000000 + SZ_8K - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
.master = &am33xx_l3_s_hwmod,
.slave = &am33xx_gpmc_hwmod,
.clk = "l3s_gclk",
.addr = am33xx_gpmc_addr_space,
.user = OCP_USER_MPU,
};

29
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
Просмотреть файл

@ -26,7 +26,6 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/mailbox-omap.h>
#include <plat/dmtimer.h>
#include "soc.h"
@ -1506,26 +1505,9 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
.sysc = &omap3xxx_mailbox_sysc,
};
static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = {
{ .name = "dsp", .tx_id = 0, .rx_id = 1 },
};
static struct omap_mbox_pdata omap3xxx_mailbox_attrs = {
.num_users = 2,
.num_fifos = 2,
.info_cnt = ARRAY_SIZE(omap3xxx_mailbox_info),
.info = omap3xxx_mailbox_info,
};
static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
{ .irq = 26 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap3xxx_mailbox_hwmod = {
.name = "mailbox",
.class = &omap3xxx_mailbox_hwmod_class,
.mpu_irqs = omap3xxx_mailbox_irqs,
.main_clk = "mailboxes_ick",
.prcm = {
.omap2 = {
@ -1536,7 +1518,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = {
.idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
},
},
.dev_attr = &omap3xxx_mailbox_attrs,
};
/*
@ -3276,20 +3257,10 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
.user = OCP_USER_MPU,
};
static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = {
{
.pa_start = 0x48094000,
.pa_end = 0x480941ff,
.flags = ADDR_TYPE_RT,
},
{ }
};
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_mailbox_hwmod,
.addr = omap3xxx_mailbox_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

10
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
Просмотреть файл

@ -4471,21 +4471,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = {
{
.pa_start = 0x4a0f6000,
.pa_end = 0x4a0f6fff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_cfg -> spinlock */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_spinlock_hwmod,
.clk = "l4_div_ck",
.addr = omap44xx_spinlock_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

3
arch/arm/mach-omap2/omap_hwmod_54xx_data.c
Просмотреть файл

@ -1844,8 +1844,7 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSC_HAS_RESET_STATUS),
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),

30
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
Просмотреть файл

@ -2566,21 +2566,11 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space dra7xx_elm_addrs[] = {
{
.pa_start = 0x48078000,
.pa_end = 0x48078fff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_per1 -> elm */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
.master = &dra7xx_l4_per1_hwmod,
.slave = &dra7xx_elm_hwmod,
.clk = "l3_iclk_div",
.addr = dra7xx_elm_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -2648,21 +2638,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = {
{
.pa_start = 0x50000000,
.pa_end = 0x500003ff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l3_main_1 -> gpmc */
static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
.master = &dra7xx_l3_main_1_hwmod,
.slave = &dra7xx_gpmc_hwmod,
.clk = "l3_iclk_div",
.addr = dra7xx_gpmc_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
@ -3029,21 +3009,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space dra7xx_spinlock_addrs[] = {
{
.pa_start = 0x4a0f6000,
.pa_end = 0x4a0f6fff,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_cfg -> spinlock */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_spinlock_hwmod,
.clk = "l3_iclk_div",
.addr = dra7xx_spinlock_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

2
arch/arm/mach-omap2/pm44xx.c
Просмотреть файл

@ -210,7 +210,7 @@ static inline int omap4plus_init_static_deps(const struct static_dep_map *map)
}
map++;
};
}
return 0;
}

2
arch/arm/mach-omap2/powerdomains3xxx_data.c
Просмотреть файл

@ -582,7 +582,7 @@ void __init omap3xxx_powerdomains_init(void)
/* Only 81xx needs custom pwrdm_operations */
if (!cpu_is_ti81xx())
pwrdm_register_platform_funcs(&omap3_pwrdm_operations);;
pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
rev = omap_rev();

195
arch/arm/mach-omap2/soc.h
Просмотреть файл

@ -129,9 +129,9 @@ int omap_type(void);
/*
* omap_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
* CPU revision (See _REV_ defined in cpu.h) [15:08]
* CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
* SoC id bits (0730, 1510, 1710, 2422...) [31:16]
* SoC revision (See _REV_ defined in cpu.h) [15:08]
* SoC class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
*/
unsigned int omap_rev(void);
@ -141,20 +141,20 @@ static inline int soc_is_omap(void)
}
/*
* Get the CPU revision for OMAP devices
* Get the SoC revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
* cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
* cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
* cpu_is_omap243x(): True for OMAP2430
* cpu_is_omap343x(): True for OMAP3430
* cpu_is_omap443x(): True for OMAP4430
* cpu_is_omap446x(): True for OMAP4460
* cpu_is_omap447x(): True for OMAP4470
* soc_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
* soc_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
* soc_is_omap243x(): True for OMAP2430
* soc_is_omap343x(): True for OMAP3430
* soc_is_omap443x(): True for OMAP4430
* soc_is_omap446x(): True for OMAP4460
* soc_is_omap447x(): True for OMAP4470
* soc_is_omap543x(): True for OMAP5430, OMAP5432
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
@ -225,23 +225,23 @@ IS_TI_SUBCLASS(814x, 0x814)
IS_AM_SUBCLASS(335x, 0x335)
IS_AM_SUBCLASS(437x, 0x437)
#define cpu_is_omap24xx() 0
#define cpu_is_omap242x() 0
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
#define cpu_is_ti81xx() 0
#define cpu_is_ti816x() 0
#define cpu_is_ti814x() 0
#define soc_is_omap24xx() 0
#define soc_is_omap242x() 0
#define soc_is_omap243x() 0
#define soc_is_omap34xx() 0
#define soc_is_omap343x() 0
#define soc_is_ti81xx() 0
#define soc_is_ti816x() 0
#define soc_is_ti814x() 0
#define soc_is_am35xx() 0
#define soc_is_am33xx() 0
#define soc_is_am335x() 0
#define soc_is_am43xx() 0
#define soc_is_am437x() 0
#define cpu_is_omap44xx() 0
#define cpu_is_omap443x() 0
#define cpu_is_omap446x() 0
#define cpu_is_omap447x() 0
#define soc_is_omap44xx() 0
#define soc_is_omap443x() 0
#define soc_is_omap446x() 0
#define soc_is_omap447x() 0
#define soc_is_omap54xx() 0
#define soc_is_omap543x() 0
#define soc_is_dra7xx() 0
@ -250,54 +250,54 @@ IS_AM_SUBCLASS(437x, 0x437)
#if defined(MULTI_OMAP2)
# if defined(CONFIG_ARCH_OMAP2)
# undef cpu_is_omap24xx
# define cpu_is_omap24xx() is_omap24xx()
# undef soc_is_omap24xx
# define soc_is_omap24xx() is_omap24xx()
# endif
# if defined (CONFIG_SOC_OMAP2420)
# undef cpu_is_omap242x
# define cpu_is_omap242x() is_omap242x()
# undef soc_is_omap242x
# define soc_is_omap242x() is_omap242x()
# endif
# if defined (CONFIG_SOC_OMAP2430)
# undef cpu_is_omap243x
# define cpu_is_omap243x() is_omap243x()
# undef soc_is_omap243x
# define soc_is_omap243x() is_omap243x()
# endif
# if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap34xx
# undef cpu_is_omap343x
# define cpu_is_omap34xx() is_omap34xx()
# define cpu_is_omap343x() is_omap343x()
# undef soc_is_omap34xx
# undef soc_is_omap343x
# define soc_is_omap34xx() is_omap34xx()
# define soc_is_omap343x() is_omap343x()
# endif
#else
# if defined(CONFIG_ARCH_OMAP2)
# undef cpu_is_omap24xx
# define cpu_is_omap24xx() 1
# undef soc_is_omap24xx
# define soc_is_omap24xx() 1
# endif
# if defined(CONFIG_SOC_OMAP2420)
# undef cpu_is_omap242x
# define cpu_is_omap242x() 1
# undef soc_is_omap242x
# define soc_is_omap242x() 1
# endif
# if defined(CONFIG_SOC_OMAP2430)
# undef cpu_is_omap243x
# define cpu_is_omap243x() 1
# undef soc_is_omap243x
# define soc_is_omap243x() 1
# endif
# if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap34xx
# define cpu_is_omap34xx() 1
# undef soc_is_omap34xx
# define soc_is_omap34xx() 1
# endif
# if defined(CONFIG_SOC_OMAP3430)
# undef cpu_is_omap343x
# define cpu_is_omap343x() 1
# undef soc_is_omap343x
# define soc_is_omap343x() 1
# endif
#endif
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
* cpu_is_omap2420(): True for OMAP2420
* cpu_is_omap2422(): True for OMAP2422
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
* soc_is_omap2420(): True for OMAP2420
* soc_is_omap2422(): True for OMAP2422
* soc_is_omap2423(): True for OMAP2423
* soc_is_omap2430(): True for OMAP2430
* soc_is_omap3430(): True for OMAP3430
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
@ -313,51 +313,51 @@ IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
#define cpu_is_omap2420() 0
#define cpu_is_omap2422() 0
#define cpu_is_omap2423() 0
#define cpu_is_omap2430() 0
#define cpu_is_omap3430() 0
#define cpu_is_omap3630() 0
#define soc_is_omap2420() 0
#define soc_is_omap2422() 0
#define soc_is_omap2423() 0
#define soc_is_omap2430() 0
#define soc_is_omap3430() 0
#define soc_is_omap3630() 0
#define soc_is_omap5430() 0
/* These are needed for the common code */
#ifdef CONFIG_ARCH_OMAP2PLUS
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
#define cpu_is_omap16xx() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap1611() 0
#define cpu_is_omap1621() 0
#define cpu_is_omap1710() 0
#define soc_is_omap7xx() 0
#define soc_is_omap15xx() 0
#define soc_is_omap16xx() 0
#define soc_is_omap1510() 0
#define soc_is_omap1610() 0
#define soc_is_omap1611() 0
#define soc_is_omap1621() 0
#define soc_is_omap1710() 0
#define cpu_class_is_omap1() 0
#define cpu_class_is_omap2() 1
#endif
#if defined(CONFIG_ARCH_OMAP2)
# undef cpu_is_omap2420
# undef cpu_is_omap2422
# undef cpu_is_omap2423
# undef cpu_is_omap2430
# define cpu_is_omap2420() is_omap2420()
# define cpu_is_omap2422() is_omap2422()
# define cpu_is_omap2423() is_omap2423()
# define cpu_is_omap2430() is_omap2430()
# undef soc_is_omap2420
# undef soc_is_omap2422
# undef soc_is_omap2423
# undef soc_is_omap2430
# define soc_is_omap2420() is_omap2420()
# define soc_is_omap2422() is_omap2422()
# define soc_is_omap2423() is_omap2423()
# define soc_is_omap2430() is_omap2430()
#endif
#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
# undef soc_is_omap3430
# undef soc_is_ti81xx
# undef soc_is_ti816x
# undef soc_is_ti814x
# undef soc_is_am35xx
# define cpu_is_omap3430() is_omap3430()
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
# define cpu_is_ti816x() is_ti816x()
# define cpu_is_ti814x() is_ti814x()
# define soc_is_omap3430() is_omap3430()
# undef soc_is_omap3630
# define soc_is_omap3630() is_omap363x()
# define soc_is_ti81xx() is_ti81xx()
# define soc_is_ti816x() is_ti816x()
# define soc_is_ti814x() is_ti814x()
# define soc_is_am35xx() is_am35xx()
#endif
@ -376,14 +376,14 @@ IS_OMAP_TYPE(3430, 0x3430)
#endif
# if defined(CONFIG_ARCH_OMAP4)
# undef cpu_is_omap44xx
# undef cpu_is_omap443x
# undef cpu_is_omap446x
# undef cpu_is_omap447x
# define cpu_is_omap44xx() is_omap44xx()
# define cpu_is_omap443x() is_omap443x()
# define cpu_is_omap446x() is_omap446x()
# define cpu_is_omap447x() is_omap447x()
# undef soc_is_omap44xx
# undef soc_is_omap443x
# undef soc_is_omap446x
# undef soc_is_omap447x
# define soc_is_omap44xx() is_omap44xx()
# define soc_is_omap443x() is_omap443x()
# define soc_is_omap446x() is_omap446x()
# define soc_is_omap447x() is_omap447x()
# endif
# if defined(CONFIG_SOC_OMAP5)
@ -556,5 +556,22 @@ level(__##fn);
#define omap_late_initcall(fn) omap_initcall(late_initcall, fn)
#define omap_late_initcall_sync(fn) omap_initcall(late_initcall_sync, fn)
#endif /* __ASSEMBLY__ */
/* Legacy defines, these can be removed when users are removed */
#define cpu_is_omap2420() soc_is_omap2420()
#define cpu_is_omap2422() soc_is_omap2422()
#define cpu_is_omap242x() soc_is_omap242x()
#define cpu_is_omap2430() soc_is_omap2430()
#define cpu_is_omap243x() soc_is_omap243x()
#define cpu_is_omap24xx() soc_is_omap24xx()
#define cpu_is_omap3430() soc_is_omap3430()
#define cpu_is_omap343x() soc_is_omap343x()
#define cpu_is_omap34xx() soc_is_omap34xx()
#define cpu_is_omap3630() soc_is_omap3630()
#define cpu_is_omap443x() soc_is_omap443x()
#define cpu_is_omap446x() soc_is_omap446x()
#define cpu_is_omap44xx() soc_is_omap44xx()
#define cpu_is_ti814x() soc_is_ti814x()
#define cpu_is_ti816x() soc_is_ti816x()
#define cpu_is_ti81xx() soc_is_ti81xx()
#endif /* __ASSEMBLY__ */

25
arch/arm/mach-omap2/sram.c
Просмотреть файл

@ -211,35 +211,10 @@ static inline int omap243x_sram_init(void)
#ifdef CONFIG_ARCH_OMAP3
static u32 (*_omap3_sram_configure_core_dpll)(
u32 m2, u32 unlock_dll, u32 f, u32 inc,
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
{
BUG_ON(!_omap3_sram_configure_core_dpll);
return _omap3_sram_configure_core_dpll(
m2, unlock_dll, f, inc,
sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
sdrc_actim_ctrl_b_0, sdrc_mr_0,
sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
void omap3_sram_restore_context(void)
{
omap_sram_reset();
_omap3_sram_configure_core_dpll =
omap_sram_push(omap3_sram_configure_core_dpll,
omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}

14
arch/arm/mach-omap2/sram.h
Просмотреть файл

@ -15,12 +15,6 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
extern u32 omap3_configure_core_dpll(
u32 m2, u32 unlock_dll, u32 f, u32 inc,
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
extern void omap3_sram_restore_context(void);
/* Do not use these */
@ -52,14 +46,6 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
extern u32 omap3_sram_configure_core_dpll(
u32 m2, u32 unlock_dll, u32 f, u32 inc,
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#ifdef CONFIG_PM
extern void omap_push_sram_idle(void);
#else

346
arch/arm/mach-omap2/sram34xx.S
Просмотреть файл

@ -1,346 +0,0 @@
/*
* linux/arch/arm/mach-omap3/sram.S
*
* Omap3 specific functions that need to be run in internal SRAM
*
* Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
* Copyright (C) 2008 Nokia Corporation
*
* Rajendra Nayak <rnayak@ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include "soc.h"
#include "iomap.h"
#include "sdrc.h"
#include "cm3xxx.h"
/*
* This file needs be built unconditionally as ARM to interoperate correctly
* with non-Thumb-2-capable firmware.
*/
.arm
.text
/* r1 parameters */
#define SDRC_NO_UNLOCK_DLL 0x0
#define SDRC_UNLOCK_DLL 0x1
/* SDRC_DLLA_CTRL bit settings */
#define FIXEDDELAY_SHIFT 24
#define FIXEDDELAY_MASK (0xff << FIXEDDELAY_SHIFT)
#define DLLIDLE_MASK 0x4
/*
* SDRC_DLLA_CTRL default values: TI hardware team indicates that
* FIXEDDELAY should be initialized to 0xf. This apparently was
* empirically determined during process testing, so no derivation
* was provided.
*/
#define FIXEDDELAY_DEFAULT (0x0f << FIXEDDELAY_SHIFT)
/* SDRC_DLLA_STATUS bit settings */
#define LOCKSTATUS_MASK 0x4
/* SDRC_POWER bit settings */
#define SRFRONIDLEREQ_MASK 0x40
/* CM_IDLEST1_CORE bit settings */
#define ST_SDRC_MASK 0x2
/* CM_ICLKEN1_CORE bit settings */
#define EN_SDRC_MASK 0x2
/* CM_CLKSEL1_PLL bit settings */
#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b
/*
* omap3_sram_configure_core_dpll - change DPLL3 M2 divider
*
* Params passed in registers:
* r0 = new M2 divider setting (only 1 and 2 supported right now)
* r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
* SDRC rates < 83MHz
* r2 = number of MPU cycles to wait for SDRC to stabilize after
* reprogramming the SDRC when switching to a slower MPU speed
* r3 = increasing SDRC rate? (1 = yes, 0 = no)
*
* Params passed via the stack. The needed params will be copied in SRAM
* before use by the code in SRAM (SDRAM is not accessible during SDRC
* reconfiguration):
* new SDRC_RFR_CTRL_0 register contents
* new SDRC_ACTIM_CTRL_A_0 register contents
* new SDRC_ACTIM_CTRL_B_0 register contents
* new SDRC_MR_0 register value
* new SDRC_RFR_CTRL_1 register contents
* new SDRC_ACTIM_CTRL_A_1 register contents
* new SDRC_ACTIM_CTRL_B_1 register contents
* new SDRC_MR_1 register value
*
* If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
* the SDRC CS1 registers
*
* NOTE: This code no longer attempts to program the SDRC AC timing and MR
* registers. This is because the code currently cannot ensure that all
* L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
* SDRAM when the registers are written. If the registers are changed while
* an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
* may enter an unpredictable state. In the future, the intent is to
* re-enable this code in cases where we can ensure that no initiators are
* touching the SDRAM. Until that time, users who know that their use case
* can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
* option.
*
* Richard Woodruff notes that any changes to this code must be carefully
* audited and tested to ensure that they don't cause a TLB miss while
* the SDRAM is inaccessible. Such a situation will crash the system
* since it will cause the ARM MMU to attempt to walk the page tables.
* These crashes may be intermittent.
*/
.align 3
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
@ pull the extra args off the stack
@ and store them in SRAM
/*
* PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour
* in Thumb-2: use a r7 as a base instead.
* Be careful not to clobber r7 when maintaing this file.
*/
THUMB( adr r7, omap3_sram_configure_core_dpll )
.macro strtext Rt:req, label:req
ARM( str \Rt, \label )
THUMB( str \Rt, [r7, \label - omap3_sram_configure_core_dpll] )
.endm
ldr r4, [sp, #52]
strtext r4, omap_sdrc_rfr_ctrl_0_val
ldr r4, [sp, #56]
strtext r4, omap_sdrc_actim_ctrl_a_0_val
ldr r4, [sp, #60]
strtext r4, omap_sdrc_actim_ctrl_b_0_val
ldr r4, [sp, #64]
strtext r4, omap_sdrc_mr_0_val
ldr r4, [sp, #68]
strtext r4, omap_sdrc_rfr_ctrl_1_val
cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0,
beq skip_cs1_params @ do not use cs1 params
ldr r4, [sp, #72]
strtext r4, omap_sdrc_actim_ctrl_a_1_val
ldr r4, [sp, #76]
strtext r4, omap_sdrc_actim_ctrl_b_1_val
ldr r4, [sp, #80]
strtext r4, omap_sdrc_mr_1_val
skip_cs1_params:
mrc p15, 0, r8, c1, c0, 0 @ read ctrl register
bic r10, r8, #0x800 @ clear Z-bit, disable branch prediction
mcr p15, 0, r10, c1, c0, 0 @ write ctrl register
dsb @ flush buffered writes to interconnect
isb @ prevent speculative exec past here
cmp r3, #1 @ if increasing SDRC clk rate,
bleq configure_sdrc @ program the SDRC regs early (for RFR)
cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state
bleq unlock_dll
blne lock_dll
bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC
bl configure_core_dpll @ change the DPLL3 M2 divider
mov r12, r2
bl wait_clk_stable @ wait for SDRC to stabilize
bl enable_sdrc @ take SDRC out of idle
cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change
bleq wait_dll_unlock
blne wait_dll_lock
cmp r3, #1 @ if increasing SDRC clk rate,
beq return_to_sdram @ return to SDRAM code, otherwise,
bl configure_sdrc @ reprogram SDRC regs now
return_to_sdram:
mcr p15, 0, r8, c1, c0, 0 @ restore ctrl register
isb @ prevent speculative exec past here
mov r0, #0 @ return value
ldmfd sp!, {r1-r12, pc} @ restore regs and return
unlock_dll:
ldr r11, omap3_sdrc_dlla_ctrl
ldr r12, [r11]
bic r12, r12, #FIXEDDELAY_MASK
orr r12, r12, #FIXEDDELAY_DEFAULT
orr r12, r12, #DLLIDLE_MASK
str r12, [r11] @ (no OCP barrier needed)
bx lr
lock_dll:
ldr r11, omap3_sdrc_dlla_ctrl
ldr r12, [r11]
bic r12, r12, #DLLIDLE_MASK
str r12, [r11] @ (no OCP barrier needed)
bx lr
sdram_in_selfrefresh:
ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
ldr r12, [r11] @ read the contents of SDRC_POWER
mov r9, r12 @ keep a copy of SDRC_POWER bits
orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle
str r12, [r11] @ write back to SDRC_POWER register
ldr r12, [r11] @ posted-write barrier for SDRC
idle_sdrc:
ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
ldr r12, [r11]
bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC
str r12, [r11]
wait_sdrc_idle:
ldr r11, omap3_cm_idlest1_core
ldr r12, [r11]
and r12, r12, #ST_SDRC_MASK @ check for SDRC idle
cmp r12, #ST_SDRC_MASK
bne wait_sdrc_idle
bx lr
configure_core_dpll:
ldr r11, omap3_cm_clksel1_pll
ldr r12, [r11]
ldr r10, core_m2_mask_val @ modify m2 for core dpll
and r12, r12, r10
orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
str r12, [r11]
ldr r12, [r11] @ posted-write barrier for CM
bx lr
wait_clk_stable:
subs r12, r12, #1
bne wait_clk_stable
bx lr
enable_sdrc:
ldr r11, omap3_cm_iclken1_core
ldr r12, [r11]
orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC
str r12, [r11]
wait_sdrc_idle1:
ldr r11, omap3_cm_idlest1_core
ldr r12, [r11]
and r12, r12, #ST_SDRC_MASK
cmp r12, #0
bne wait_sdrc_idle1
restore_sdrc_power_val:
ldr r11, omap3_sdrc_power
str r9, [r11] @ restore SDRC_POWER, no barrier needed
bx lr
wait_dll_lock:
ldr r11, omap3_sdrc_dlla_status
ldr r12, [r11]
and r12, r12, #LOCKSTATUS_MASK
cmp r12, #LOCKSTATUS_MASK
bne wait_dll_lock
bx lr
wait_dll_unlock:
ldr r11, omap3_sdrc_dlla_status
ldr r12, [r11]
and r12, r12, #LOCKSTATUS_MASK
cmp r12, #0x0
bne wait_dll_unlock
bx lr
configure_sdrc:
ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM
ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM
str r12, [r11] @ store
#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
ldr r12, omap_sdrc_actim_ctrl_a_0_val
ldr r11, omap3_sdrc_actim_ctrl_a_0
str r12, [r11]
ldr r12, omap_sdrc_actim_ctrl_b_0_val
ldr r11, omap3_sdrc_actim_ctrl_b_0
str r12, [r11]
ldr r12, omap_sdrc_mr_0_val
ldr r11, omap3_sdrc_mr_0
str r12, [r11]
#endif
ldr r12, omap_sdrc_rfr_ctrl_1_val
cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0,
beq skip_cs1_prog @ do not program cs1 params
ldr r11, omap3_sdrc_rfr_ctrl_1
str r12, [r11]
#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
ldr r12, omap_sdrc_actim_ctrl_a_1_val
ldr r11, omap3_sdrc_actim_ctrl_a_1
str r12, [r11]
ldr r12, omap_sdrc_actim_ctrl_b_1_val
ldr r11, omap3_sdrc_actim_ctrl_b_1
str r12, [r11]
ldr r12, omap_sdrc_mr_1_val
ldr r11, omap3_sdrc_mr_1
str r12, [r11]
#endif
skip_cs1_prog:
ldr r12, [r11] @ posted-write barrier for SDRC
bx lr
.align
omap3_sdrc_power:
.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
omap3_cm_clksel1_pll:
.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
omap3_cm_idlest1_core:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
omap3_cm_iclken1_core:
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
omap3_sdrc_rfr_ctrl_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap3_sdrc_rfr_ctrl_1:
.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
omap3_sdrc_actim_ctrl_a_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
omap3_sdrc_actim_ctrl_a_1:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
omap3_sdrc_actim_ctrl_b_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
omap3_sdrc_actim_ctrl_b_1:
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
omap3_sdrc_mr_0:
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
omap3_sdrc_mr_1:
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
omap_sdrc_rfr_ctrl_0_val:
.word 0xDEADBEEF
omap_sdrc_rfr_ctrl_1_val:
.word 0xDEADBEEF
omap_sdrc_actim_ctrl_a_0_val:
.word 0xDEADBEEF
omap_sdrc_actim_ctrl_a_1_val:
.word 0xDEADBEEF
omap_sdrc_actim_ctrl_b_0_val:
.word 0xDEADBEEF
omap_sdrc_actim_ctrl_b_1_val:
.word 0xDEADBEEF
omap_sdrc_mr_0_val:
.word 0xDEADBEEF
omap_sdrc_mr_1_val:
.word 0xDEADBEEF
omap3_sdrc_dlla_status:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
omap3_sdrc_dlla_ctrl:
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
core_m2_mask_val:
.word 0x07FFFFFF
ENDPROC(omap3_sram_configure_core_dpll)
ENTRY(omap3_sram_configure_core_dpll_sz)
.word . - omap3_sram_configure_core_dpll

162
arch/arm/mach-omap2/timer.c
Просмотреть файл

@ -183,7 +183,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
of_get_property(np, "ti,timer-secure", NULL)))
continue;
of_add_property(np, &device_disabled);
if (!of_device_is_compatible(np, "ti,omap-counter32k"))
of_add_property(np, &device_disabled);
return np;
}
@ -394,7 +395,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
int ret;
struct device_node *np = NULL;
struct omap_hwmod *oh;
void __iomem *vbase;
const char *oh_name = "counter_32k";
/*
@ -420,18 +420,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
omap_hwmod_setup_one(oh_name);
if (np) {
vbase = of_iomap(np, 0);
of_node_put(np);
} else {
vbase = omap_hwmod_get_mpu_rt_va(oh);
}
if (!vbase) {
pr_warn("%s: failed to get counter_32k resource\n", __func__);
return -ENXIO;
}
ret = omap_hwmod_enable(oh);
if (ret) {
pr_warn("%s: failed to enable counter_32k module (%d)\n",
@ -439,13 +427,18 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
return ret;
}
ret = omap_init_clocksource_32k(vbase);
if (ret) {
pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
__func__, ret);
omap_hwmod_idle(oh);
}
if (!of_have_populated_dt()) {
void __iomem *vbase;
vbase = omap_hwmod_get_mpu_rt_va(oh);
ret = omap_init_clocksource_32k(vbase);
if (ret) {
pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
__func__, ret);
omap_hwmod_idle(oh);
}
}
return ret;
}
@ -476,7 +469,64 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
clocksource_gpt.name, clksrc.rate);
}
#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src,
const char *clkev_prop, int clksrc_nr, const char *clksrc_src,
const char *clksrc_prop, bool gptimer)
{
omap_clk_init();
omap_dmtimer_init();
omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop);
/* Enable the use of clocksource="gp_timer" kernel parameter */
if (use_gptimer_clksrc || gptimer)
omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src,
clksrc_prop);
else
omap2_sync32k_clocksource_init();
}
void __init omap_init_time(void)
{
__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
2, "timer_sys_ck", NULL, false);
if (of_have_populated_dt())
clocksource_probe();
}
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
void __init omap3_secure_sync32k_timer_init(void)
{
__omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
2, "timer_sys_ck", NULL, false);
}
#endif /* CONFIG_ARCH_OMAP3 */
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
void __init omap3_gptimer_timer_init(void)
{
__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
1, "timer_sys_ck", "ti,timer-alwon", true);
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
static void __init omap4_sync32k_timer_init(void)
{
__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
2, "sys_clkin_ck", NULL, false);
}
void __init omap4_local_timer_init(void)
{
omap4_sync32k_timer_init();
clocksource_probe();
}
#endif
#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
/*
* The realtime counter also called master counter, is a free-running
* counter, which is related to real time. It produces the count used
@ -488,6 +538,7 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
*/
static void __init realtime_counter_init(void)
{
#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
void __iomem *base;
static struct clk *sys_clk;
unsigned long rate;
@ -586,78 +637,9 @@ sysclk1_based:
set_cntfreq();
iounmap(base);
}
#else
static inline void __init realtime_counter_init(void)
{}
#endif
#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_gptimer_timer_init(void) \
{ \
omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
clksrc_prop); \
}
#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_sync32k_timer_init(void) \
{ \
omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
/* Enable the use of clocksource="gp_timer" kernel parameter */ \
if (use_gptimer_clksrc) \
omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
clksrc_prop); \
else \
omap2_sync32k_clocksource_init(); \
}
#ifdef CONFIG_ARCH_OMAP2
OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon",
2, "timer_sys_ck", NULL);
#endif /* CONFIG_ARCH_OMAP2 */
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon",
2, "timer_sys_ck", NULL);
OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
2, "timer_sys_ck", NULL);
#endif /* CONFIG_ARCH_OMAP3 */
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
defined(CONFIG_SOC_AM43XX)
OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
1, "timer_sys_ck", "ti,timer-alwon");
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX)
static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
2, "sys_clkin_ck", NULL);
#endif
#ifdef CONFIG_ARCH_OMAP4
#ifdef CONFIG_HAVE_ARM_TWD
void __init omap4_local_timer_init(void)
{
omap4_sync32k_timer_init();
clocksource_probe();
}
#else
void __init omap4_local_timer_init(void)
{
omap4_sync32k_timer_init();
}
#endif /* CONFIG_HAVE_ARM_TWD */
#endif /* CONFIG_ARCH_OMAP4 */
#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
void __init omap5_realtime_timer_init(void)
{
omap4_sync32k_timer_init();

4
arch/arm/mach-omap2/vc.c
Просмотреть файл

@ -280,10 +280,6 @@ void omap3_vc_set_pmic_signaling(int core_next_state)
}
}
#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \
OMAP3430_PRM_POLCTRL_CLKREQ_POL)
#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL
/*
* Configure signal polarity for sys_clkreq and sys_off_mode pins
* as the default values are wrong and can cause the system to hang

2
arch/arm/mach-prima2/hotplug.c
Просмотреть файл

@ -32,7 +32,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
*
* Called with IRQs disabled
*/
void __ref sirfsoc_cpu_die(unsigned int cpu)
void sirfsoc_cpu_die(unsigned int cpu)
{
platform_do_lowpower(cpu);
}

9
arch/arm/mach-pxa/cm-x300.c
Просмотреть файл

@ -26,6 +26,7 @@
#include <linux/dm9000.h>
#include <linux/leds.h>
#include <linux/rtc-v3020.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
@ -305,11 +306,14 @@ static inline void cm_x300_init_lcd(void) {}
#endif
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct pwm_lookup cm_x300_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data cm_x300_backlight_data = {
.pwm_id = 2,
.max_brightness = 100,
.dft_brightness = 100,
.pwm_period_ns = 10000,
.enable_gpio = -1,
};
@ -323,6 +327,7 @@ static struct platform_device cm_x300_backlight_device = {
static void cm_x300_init_bl(void)
{
pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
platform_device_register(&cm_x300_backlight_device);
}
#else

9
arch/arm/mach-pxa/colibri-pxa270-income.c
Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c/pxa-i2c.h>
@ -184,11 +185,14 @@ static inline void income_lcd_init(void) {}
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct pwm_lookup income_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data income_backlight_data = {
.pwm_id = 0,
.max_brightness = 0x3ff,
.dft_brightness = 0x1ff,
.pwm_period_ns = 1000000,
.enable_gpio = -1,
};
@ -202,6 +206,7 @@ static struct platform_device income_backlight = {
static void __init income_pwm_init(void)
{
pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
platform_device_register(&income_backlight);
}
#else

20
arch/arm/mach-pxa/devices.c
Просмотреть файл

@ -395,6 +395,26 @@ static struct resource pxa_ir_resources[] = {
.end = IRQ_ICP,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = 0x40800000,
.end = 0x4080001b,
.flags = IORESOURCE_MEM,
},
[4] = {
.start = 0x40700000,
.end = 0x40700023,
.flags = IORESOURCE_MEM,
},
[5] = {
.start = 17,
.end = 17,
.flags = IORESOURCE_DMA,
},
[6] = {
.start = 18,
.end = 18,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa_device_ficp = {

9
arch/arm/mach-pxa/ezx.c
Просмотреть файл

@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/input.h>
#include <linux/gpio.h>
@ -49,11 +50,14 @@
#define GPIO19_GEN1_CAM_RST 19
#define GPIO28_GEN2_CAM_RST 28
static struct pwm_lookup ezx_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data ezx_backlight_data = {
.pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
.pwm_period_ns = 78770,
.enable_gpio = -1,
};
@ -817,6 +821,7 @@ static void __init a780_init(void)
platform_device_register(&a780_camera);
}
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a780_devices));
}

3
arch/arm/mach-pxa/hx4700.c
Просмотреть файл

@ -557,10 +557,8 @@ static struct platform_device hx4700_lcd = {
*/
static struct platform_pwm_backlight_data backlight_data = {
.pwm_id = -1, /* Superseded by pwm_lookup */
.max_brightness = 200,
.dft_brightness = 100,
.pwm_period_ns = 30923,
.enable_gpio = -1,
};
@ -630,7 +628,6 @@ static struct spi_board_info tsc2046_board_info[] __initdata = {
static struct pxa2xx_spi_master pxa_ssp2_master_info = {
.num_chipselect = 1,
.clock_enable = CKEN_SSP2,
.enable_dma = 1,
};

2
arch/arm/mach-pxa/icontrol.c
Просмотреть файл

@ -116,13 +116,11 @@ static struct spi_board_info mcp251x_board_info[] = {
};
static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
.clock_enable = CKEN_SSP3,
.num_chipselect = 2,
.enable_dma = 1
};
static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
.clock_enable = CKEN_SSP4,
.num_chipselect = 2,
.enable_dma = 1
};

70
arch/arm/mach-pxa/include/mach/magician.h
Просмотреть файл

@ -52,9 +52,9 @@
#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101
#define GPIO102_MAGICIAN_KEY_PHONE 102
#define GPIO103_MAGICIAN_LED_KP 103
#define GPIO104_MAGICIAN_LCD_POWER_1 104
#define GPIO105_MAGICIAN_LCD_POWER_2 105
#define GPIO106_MAGICIAN_LCD_POWER_3 106
#define GPIO104_MAGICIAN_LCD_VOFF_EN 104
#define GPIO105_MAGICIAN_LCD_VON_EN 105
#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106
#define GPIO107_MAGICIAN_DS1WM_IRQ 107
#define GPIO108_MAGICIAN_GSM_READY 108
#define GPIO114_MAGICIAN_UNKNOWN 114
@ -78,43 +78,51 @@
* CPLD EGPIOs
*/
#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
#define MAGICIAN_EGPIO(reg,bit) \
(MAGICIAN_EGPIO_BASE + 8*reg + bit)
/* output */
#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2)
#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5)
#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6)
#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7)
#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0)
#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1)
#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2)
#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3)
#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4)
#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5)
#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6)
#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN MAGICIAN_EGPIO(2, 2)
#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6)
#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
/* input */
#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0)
#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1)
/* USB or AC charger type */
#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0)
/*
* Vbus is detected
* FIXME behaves like (6,3), may differ for host/device
*/
#define EGPIO_MAGICIAN_CABLE_VBUS MAGICIAN_EGPIO(4, 1)
#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2)
#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3)
#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
/* FIXME behaves like (4,1), may differ for host/device */
#define EGPIO_MAGICIAN_CABLE_INSERTED MAGICIAN_EGPIO(6, 3)
#endif /* _MAGICIAN_H_ */

2
arch/arm/mach-pxa/include/mach/pxa27x.h
Просмотреть файл

@ -19,7 +19,7 @@
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
extern int __init pxa27x_set_pwrmode(unsigned int mode);
extern int pxa27x_set_pwrmode(unsigned int mode);
extern void pxa27x_cpu_pm_enter(suspend_state_t state);
#endif /* __MACH_PXA27x_H */

9
arch/arm/mach-pxa/lpd270.c
Просмотреть файл

@ -23,6 +23,7 @@
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
@ -271,11 +272,14 @@ static struct platform_device lpd270_flash_device[2] = {
},
};
static struct pwm_lookup lpd270_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data lpd270_backlight_data = {
.pwm_id = 0,
.max_brightness = 1,
.dft_brightness = 1,
.pwm_period_ns = 78770,
.enable_gpio = -1,
};
@ -474,6 +478,7 @@ static void __init lpd270_init(void)
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);

680
arch/arm/mach-pxa/magician.c
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

19
arch/arm/mach-pxa/mainstone.c
Просмотреть файл

@ -26,6 +26,7 @@
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <linux/i2c/pxa-i2c.h>
@ -248,11 +249,14 @@ static struct platform_device mst_flash_device[2] = {
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pwm_lookup mainstone_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data mainstone_backlight_data = {
.pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
.pwm_period_ns = 78770,
.enable_gpio = -1,
};
@ -266,9 +270,16 @@ static struct platform_device mainstone_backlight_device = {
static void __init mainstone_backlight_register(void)
{
int ret = platform_device_register(&mainstone_backlight_device);
if (ret)
int ret;
pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
ret = platform_device_register(&mainstone_backlight_device);
if (ret) {
printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
pwm_remove_table(mainstone_pwm_lookup,
ARRAY_SIZE(mainstone_pwm_lookup));
}
}
#else
#define mainstone_backlight_register() do { } while (0)

11
arch/arm/mach-pxa/mioa701.c
Просмотреть файл

@ -26,6 +26,7 @@
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/rtc.h>
#include <linux/leds.h>
@ -181,12 +182,15 @@ static unsigned long mioa701_pin_config[] = {
MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
};
static struct pwm_lookup mioa701_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
PWM_POLARITY_NORMAL),
};
/* LCD Screen and Backlight */
static struct platform_pwm_backlight_data mioa701_backlight_data = {
.pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 50,
.pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */
.enable_gpio = -1,
};
@ -678,6 +682,7 @@ MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
MIO_SIMPLE_DEV(wm9713_acodec, "wm9713-codec", NULL);
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink);
@ -685,6 +690,7 @@ static struct platform_device *devices[] __initdata = {
&mioa701_gpio_keys,
&mioa701_backlight,
&mioa701_led,
&wm9713_acodec,
&pxa2xx_pcm,
&mioa701_sound,
&power_dev,
@ -751,6 +757,7 @@ static void __init mioa701_machine_init(void)
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();

9
arch/arm/mach-pxa/palm27x.c
Просмотреть файл

@ -15,6 +15,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx.h>
@ -270,6 +271,11 @@ void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct pwm_lookup palm27x_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
PWM_POLARITY_NORMAL),
};
static int palm_bl_power;
static int palm_lcd_power;
@ -318,10 +324,8 @@ static void palm27x_backlight_exit(struct device *dev)
}
static struct platform_pwm_backlight_data palm27x_backlight_data = {
.pwm_id = 0,
.max_brightness = 0xfe,
.dft_brightness = 0x7e,
.pwm_period_ns = 3500 * 1024,
.enable_gpio = -1,
.init = palm27x_backlight_init,
.notify = palm27x_backlight_notify,
@ -340,6 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd)
{
palm_bl_power = bl;
palm_lcd_power = lcd;
pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
platform_device_register(&palm27x_backlight);
}
#endif

9
arch/arm/mach-pxa/palmtc.c
Просмотреть файл

@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/input.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
@ -166,11 +167,14 @@ static inline void palmtc_keys_init(void) {}
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct pwm_lookup palmtc_pwm_lookup[] = {
PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
PWM_PERIOD_NORMAL),
};
static struct platform_pwm_backlight_data palmtc_backlight_data = {
.pwm_id = 1,
.max_brightness = PALMTC_MAX_INTENSITY,
.dft_brightness = PALMTC_MAX_INTENSITY,
.pwm_period_ns = PALMTC_PERIOD_NS,
.enable_gpio = GPIO_NR_PALMTC_BL_POWER,
};
@ -184,6 +188,7 @@ static struct platform_device palmtc_backlight = {
static void __init palmtc_pwm_init(void)
{
pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
platform_device_register(&palmtc_backlight);
}
#else

9
arch/arm/mach-pxa/palmte2.c
Просмотреть файл

@ -21,6 +21,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx.h>
@ -138,6 +139,11 @@ static struct platform_device palmte2_pxa_keys = {
/******************************************************************************
* Backlight
******************************************************************************/
static struct pwm_lookup palmte2_pwm_lookup[] = {
PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
};
static struct gpio palmte_bl_gpios[] = {
{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
@ -161,10 +167,8 @@ static void palmte2_backlight_exit(struct device *dev)
}
static struct platform_pwm_backlight_data palmte2_backlight_data = {
.pwm_id = 0,
.max_brightness = PALMTE2_MAX_INTENSITY,
.dft_brightness = PALMTE2_MAX_INTENSITY,
.pwm_period_ns = PALMTE2_PERIOD_NS,
.enable_gpio = -1,
.init = palmte2_backlight_init,
.notify = palmte2_backlight_notify,
@ -355,6 +359,7 @@ static void __init palmte2_init(void)
pxa_set_ac97_info(&palmte2_ac97_pdata);
pxa_set_ficp_info(&palmte2_ficp_platform_data);
pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
platform_add_devices(devices, ARRAY_SIZE(devices));
}

9
arch/arm/mach-pxa/pcm990-baseboard.c
Просмотреть файл

@ -24,6 +24,7 @@
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <media/mt9v022.h>
@ -148,11 +149,14 @@ static struct pxafb_mach_info pcm990_fbinfo __initdata = {
};
#endif
static struct pwm_lookup pcm990_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data pcm990_backlight_data = {
.pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
.pwm_period_ns = 78770,
.enable_gpio = -1,
};
@ -542,6 +546,7 @@ void __init pcm990_baseboard_init(void)
#ifndef CONFIG_PCM990_DISPLAY_NONE
pxa_set_fb_info(NULL, &pcm990_fbinfo);
#endif
pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
platform_device_register(&pcm990_backlight_device);
/* MMC */

2
arch/arm/mach-pxa/pxa27x.c
Просмотреть файл

@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
*/
static unsigned int pwrmode = PWRMODE_SLEEP;
int __init pxa27x_set_pwrmode(unsigned int mode)
int pxa27x_set_pwrmode(unsigned int mode)
{
switch (mode) {
case PWRMODE_SLEEP:

21
arch/arm/mach-pxa/raumfeld.c
Просмотреть файл

@ -29,6 +29,7 @@
#include <linux/leds.h>
#include <linux/w1-gpio.h>
#include <linux/sched.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
@ -507,7 +508,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
.ext_pullup_enable_pin = -EINVAL,
};
struct platform_device raumfeld_w1_gpio_device = {
static struct platform_device raumfeld_w1_gpio_device = {
.name = "w1-gpio",
.dev = {
.platform_data = &w1_gpio_platform_data
@ -531,13 +532,15 @@ static void __init raumfeld_w1_init(void)
* Framebuffer device
*/
static struct pwm_lookup raumfeld_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
PWM_POLARITY_NORMAL),
};
/* PWM controlled backlight */
static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
.pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
/* 10000 ns = 10 ms ^= 100 kHz */
.pwm_period_ns = 10000,
.enable_gpio = -1,
};
@ -618,6 +621,8 @@ static void __init raumfeld_lcd_init(void)
} else {
mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
pwm_add_table(raumfeld_pwm_lookup,
ARRAY_SIZE(raumfeld_pwm_lookup));
platform_device_register(&raumfeld_pwm_backlight_device);
}
@ -629,7 +634,7 @@ static void __init raumfeld_lcd_init(void)
* SPI devices
*/
struct spi_gpio_platform_data raumfeld_spi_platform_data = {
static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
.sck = GPIO_SPI_CLK,
.mosi = GPIO_SPI_MOSI,
.miso = GPIO_SPI_MISO,
@ -848,7 +853,7 @@ static void __init raumfeld_power_init(void)
static struct regulator_consumer_supply audio_va_consumer_supply =
REGULATOR_SUPPLY("va", "0-0048");
struct regulator_init_data audio_va_initdata = {
static struct regulator_init_data audio_va_initdata = {
.consumer_supplies = &audio_va_consumer_supply,
.num_consumer_supplies = 1,
.constraints = {
@ -880,7 +885,7 @@ static struct regulator_consumer_supply audio_dummy_supplies[] = {
REGULATOR_SUPPLY("vlc", "0-0048"),
};
struct regulator_init_data audio_dummy_initdata = {
static struct regulator_init_data audio_dummy_initdata = {
.consumer_supplies = audio_dummy_supplies,
.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
.constraints = {
@ -928,7 +933,7 @@ static struct regulator_init_data vcc_mmc_init_data = {
.num_consumer_supplies = 1,
};
struct max8660_subdev_data max8660_v6_subdev_data = {
static struct max8660_subdev_data max8660_v6_subdev_data = {
.id = MAX8660_V6,
.name = "vmmc",
.platform_data = &vcc_mmc_init_data,

13
arch/arm/mach-pxa/tavorevb.c
Просмотреть файл

@ -18,6 +18,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/smc91x.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <asm/mach-types.h>
@ -168,21 +169,24 @@ static inline void tavorevb_init_keypad(void) {}
#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pwm_lookup tavorevb_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000,
PWM_POLARITY_NORMAL),
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
[0] = {
/* primary backlight */
.pwm_id = 2,
.max_brightness = 100,
.dft_brightness = 100,
.pwm_period_ns = 100000,
.enable_gpio = -1,
},
[1] = {
/* secondary backlight */
.pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
.pwm_period_ns = 100000,
.enable_gpio = -1,
},
};
@ -470,6 +474,7 @@ static struct pxafb_mach_info tavorevb_lcd_info = {
static void __init tavorevb_init_lcd(void)
{
pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup));
platform_device_register(&tavorevb_backlight_devices[0]);
platform_device_register(&tavorevb_backlight_devices[1]);
pxa_set_fb_info(NULL, &tavorevb_lcd_info);

9
arch/arm/mach-pxa/viper.c
Просмотреть файл

@ -39,6 +39,7 @@
#include <linux/i2c/pxa-i2c.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/usb/isp116x.h>
#include <linux/mtd/mtd.h>
@ -350,6 +351,11 @@ static struct pxafb_mach_info fb_info = {
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
static struct pwm_lookup viper_pwm_lookup[] = {
PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
PWM_POLARITY_NORMAL),
};
static int viper_backlight_init(struct device *dev)
{
int ret;
@ -398,10 +404,8 @@ static void viper_backlight_exit(struct device *dev)
}
static struct platform_pwm_backlight_data viper_backlight_data = {
.pwm_id = 0,
.max_brightness = 100,
.dft_brightness = 100,
.pwm_period_ns = 1000000,
.enable_gpio = -1,
.init = viper_backlight_init,
.notify = viper_backlight_notify,
@ -939,6 +943,7 @@ static void __init viper_init(void)
smc91x_device.num_resources--;
pxa_set_i2c_info(NULL);
pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
viper_init_vcore_gpios();

15
arch/arm/mach-pxa/z2.c
Просмотреть файл

@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/z2_battery.h>
#include <linux/dma-mapping.h>
@ -199,21 +200,24 @@ static inline void z2_nor_init(void) {}
* Backlight
******************************************************************************/
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct pwm_lookup z2_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
PWM_POLARITY_NORMAL),
PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data z2_backlight_data[] = {
[0] = {
/* Keypad Backlight */
.pwm_id = 1,
.max_brightness = 1023,
.dft_brightness = 0,
.pwm_period_ns = 1260320,
.enable_gpio = -1,
},
[1] = {
/* LCD Backlight */
.pwm_id = 2,
.max_brightness = 1023,
.dft_brightness = 512,
.pwm_period_ns = 1260320,
.enable_gpio = -1,
},
};
@ -236,6 +240,7 @@ static struct platform_device z2_backlight_devices[2] = {
};
static void __init z2_pwm_init(void)
{
pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
platform_device_register(&z2_backlight_devices[0]);
platform_device_register(&z2_backlight_devices[1]);
}
@ -595,13 +600,11 @@ static struct spi_board_info spi_board_info[] __initdata = {
};
static struct pxa2xx_spi_master pxa_ssp1_master_info = {
.clock_enable = CKEN_SSP,
.num_chipselect = 1,
.enable_dma = 1,
};
static struct pxa2xx_spi_master pxa_ssp2_master_info = {
.clock_enable = CKEN_SSP2,
.num_chipselect = 1,
};

9
arch/arm/mach-pxa/zylonite.c
Просмотреть файл

@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
@ -120,11 +121,14 @@ static inline void zylonite_init_leds(void) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pwm_lookup zylonite_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data zylonite_backlight_data = {
.pwm_id = 3,
.max_brightness = 100,
.dft_brightness = 100,
.pwm_period_ns = 10000,
.enable_gpio = -1,
};
@ -206,6 +210,7 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = {
static void __init zylonite_init_lcd(void)
{
pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
platform_device_register(&zylonite_backlight_device);
if (lcd_id & 0x20) {

2
arch/arm/mach-qcom/platsmp.c
Просмотреть файл

@ -49,7 +49,7 @@ extern void secondary_startup_arm(void);
static DEFINE_SPINLOCK(boot_lock);
#ifdef CONFIG_HOTPLUG_CPU
static void __ref qcom_cpu_die(unsigned int cpu)
static void qcom_cpu_die(unsigned int cpu)
{
wfi();
}

2
arch/arm/mach-realview/hotplug.c
Просмотреть файл

@ -90,7 +90,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
*
* Called with IRQs disabled
*/
void __ref realview_cpu_die(unsigned int cpu)
void realview_cpu_die(unsigned int cpu)
{
int spurious = 0;

73
arch/arm/mach-shmobile/Kconfig
Просмотреть файл

@ -98,76 +98,3 @@ config ARCH_SH73A0
comment "Renesas ARM SoCs System Configuration"
endif
if ARCH_SHMOBILE_LEGACY
comment "Renesas ARM SoCs System Type"
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
select ARCH_RCAR_GEN1
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_RCAR_GEN1
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
comment "Renesas ARM SoCs Board Type"
config MACH_BOCKW
bool "BOCK-W platform"
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4554 if SND_SIMPLE_CARD
select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
select USE_OF
config MACH_BOCKW_REFERENCE
bool "BOCK-W - Reference Device Tree Implementation"
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
---help---
Use reference implementation of BockW board support
which makes use of device tree at the expense
of not supporting a number of devices.
This is intended to aid developers
comment "Renesas ARM SoCs System Configuration"
config CPU_HAS_INTEVT
bool
default y
config SH_CLK_CPG
bool
source "drivers/sh/Kconfig"
endif
if ARCH_SHMOBILE
menu "Timer and clock configuration"
config SHMOBILE_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
default "128"
help
Allows the configuration of the timer frequency. It is customary
to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
case of low timer frequencies other values may be more suitable.
Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
want to select a HZ value such as 128 that can evenly divide RCLK.
A HZ value that does not divide evenly may cause timer drift.
endmenu
endif

14
arch/arm/mach-shmobile/Makefile
Просмотреть файл

@ -3,7 +3,7 @@
#
# Common objects
obj-y := timer.o console.o
obj-y := timer.o
# CPU objects
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o
@ -18,12 +18,6 @@ obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
# Clock objects
ifndef CONFIG_COMMON_CLK
obj-y += clock.o
obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
endif
# CPU reset vector handling objects
cpu-y := platsmp.o headsmp.o
@ -49,11 +43,5 @@ obj-$(CONFIG_PM_RCAR) += pm-rcar.o
obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
# Board objects
ifndef CONFIG_ARCH_SHMOBILE_MULTI
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
endif
# Framework support
obj-$(CONFIG_SMP) += $(smp-y)

12
arch/arm/mach-shmobile/Makefile.boot
Просмотреть файл

@ -1,12 +0,0 @@
# per-board load address for uImage
loadaddr-y :=
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
__ZRELADDR := $(sort $(loadaddr-y))
zreladdr-y += $(__ZRELADDR)
# Unsupported legacy stuff
#
#params_phys-y (Instead: Pass atags pointer in r2)
#initrd_phys-y (Instead: Use compiled-in initramfs)

86
arch/arm/mach-shmobile/board-bockw-reference.c
Просмотреть файл

@ -1,86 +0,0 @@
/*
* Bock-W board support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include "common.h"
#include "r8a7778.h"
/*
* see board-bock.c for checking detail of dip-switch
*/
#define FPGA 0x18200000
#define IRQ0MR 0x30
#define COMCTLR 0x101c
#define PFC 0xfffc0000
#define PUPR4 0x110
static void __init bockw_init(void)
{
void __iomem *fpga;
void __iomem *pfc;
#ifndef CONFIG_COMMON_CLK
r8a7778_clock_init();
#endif
r8a7778_init_irq_extpin_dt(1);
r8a7778_add_dt_devices();
fpga = ioremap_nocache(FPGA, SZ_1M);
if (fpga) {
/*
* CAUTION
*
* IRQ0/1 is cascaded interrupt from FPGA.
* it should be cared in the future
* Now, it is assuming IRQ0 was used only from SMSC.
*/
u16 val = ioread16(fpga + IRQ0MR);
val &= ~(1 << 4); /* enable SMSC911x */
iowrite16(val, fpga + IRQ0MR);
iounmap(fpga);
}
pfc = ioremap_nocache(PFC, 0x200);
if (pfc) {
/*
* FIXME
*
* SDHI CD/WP pin needs pull-up
*/
iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4);
iounmap(pfc);
}
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *const bockw_boards_compat_dt[] __initconst = {
"renesas,bockw-reference",
NULL,
};
DT_MACHINE_START(BOCKW_DT, "bockw")
.init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = bockw_init,
.init_late = shmobile_init_late,
.dt_compat = bockw_boards_compat_dt,
MACHINE_END

737
arch/arm/mach-shmobile/board-bockw.c
Просмотреть файл

@ -1,737 +0,0 @@
/*
* Bock-W board support
*
* Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
* Copyright (C) 2013-2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mtd/partitions.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/usb-rcar-phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb/renesas_usbhs.h>
#include <media/soc_camera.h>
#include <asm/mach/arch.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
#include "common.h"
#include "irqs.h"
#include "r8a7778.h"
#define FPGA 0x18200000
#define IRQ0MR 0x30
#define COMCTLR 0x101c
static void __iomem *fpga;
/*
* CN9(Upper side) SCIF/RCAN selection
*
* 1,4 3,6
* SW40 SCIF RCAN
* SW41 SCIF RCAN
*/
/*
* MMC (CN26) pin
*
* SW6 (D2) 3 pin
* SW7 (D5) ON
* SW8 (D3) 3 pin
* SW10 (D4) 1 pin
* SW12 (CLK) 1 pin
* SW13 (D6) 3 pin
* SW14 (CMD) ON
* SW15 (D6) 1 pin
* SW16 (D0) ON
* SW17 (D1) ON
* SW18 (D7) 3 pin
* SW19 (MMC) 1 pin
*/
/*
* SSI settings
*
* SW45: 1-4 side (SSI5 out, ROUT/LOUT CN19 Mid)
* SW46: 1101 (SSI6 Recorde)
* SW47: 1110 (SSI5 Playback)
* SW48: 11 (Recorde power)
* SW49: 1 (SSI slave mode)
* SW50: 1111 (SSI7, SSI8)
* SW51: 1111 (SSI3, SSI4)
* SW54: 1pin (ak4554 FPGA control)
* SW55: 1 (CLKB is 24.5760MHz)
* SW60: 1pin (ak4554 FPGA control)
* SW61: 3pin (use X11 clock)
* SW78: 3-6 (ak4642 connects I2C0)
*
* You can use sound as
*
* hw0: CN19: SSI56-AK4643
* hw1: CN21: SSI3-AK4554(playback)
* hw2: CN21: SSI4-AK4554(capture)
* hw3: CN20: SSI7-AK4554(playback)
* hw4: CN20: SSI8-AK4554(capture)
*
* this command is required when playback on hw0.
*
* # amixer set "LINEOUT Mixer DACL" on
*/
/*
* USB
*
* USB1 (CN29) can be Host/Function
*
* Host Func
* SW98 1 2
* SW99 1 3
*/
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
};
static struct smsc911x_platform_config smsc911x_data __initdata = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct resource smsc911x_resources[] __initdata = {
DEFINE_RES_MEM(0x18300000, 0x1000),
DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
};
#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
/*
* When USB1 is Func
*/
static int usbhsf_get_id(struct platform_device *pdev)
{
return USBHS_GADGET;
}
#define SUSPMODE 0x102
static int usbhsf_power_ctrl(struct platform_device *pdev,
void __iomem *base, int enable)
{
enable = !!enable;
r8a7778_usb_phy_power(enable);
iowrite16(enable << 14, base + SUSPMODE);
return 0;
}
static struct resource usbhsf_resources[] __initdata = {
DEFINE_RES_MEM(0xffe60000, 0x110),
DEFINE_RES_IRQ(gic_iid(0x4f)),
};
static struct renesas_usbhs_platform_info usbhs_info __initdata = {
.platform_callback = {
.get_id = usbhsf_get_id,
.power_ctrl = usbhsf_power_ctrl,
},
.driver_param = {
.buswait_bwait = 4,
.d0_tx_id = HPBDMA_SLAVE_USBFUNC_TX,
.d1_rx_id = HPBDMA_SLAVE_USBFUNC_RX,
},
};
#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
#define USB1_DEVICE "renesas_usbhs"
#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \
platform_device_register_resndata( \
NULL, "renesas_usbhs", -1, \
usbhsf_resources, \
ARRAY_SIZE(usbhsf_resources), \
&usbhs_info, sizeof(struct renesas_usbhs_platform_info))
#else
/*
* When USB1 is Host
*/
#define USB_PHY_SETTING { }
#define USB1_DEVICE "ehci-platform"
#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
#endif
/* USB */
static struct resource usb_phy_resources[] __initdata = {
DEFINE_RES_MEM(0xffe70800, 0x100),
DEFINE_RES_MEM(0xffe76000, 0x100),
};
static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
USB_PHY_SETTING;
/* SDHI */
static struct tmio_mmc_data sdhi0_info __initdata = {
.chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX,
.chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX,
.capabilities = MMC_CAP_SD_HIGHSPEED,
.ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
.flags = TMIO_MMC_HAS_IDLE_WAIT,
};
static struct resource sdhi0_resources[] __initdata = {
DEFINE_RES_MEM(0xFFE4C000, 0x100),
DEFINE_RES_IRQ(gic_iid(0x77)),
};
/* Ether */
static struct resource ether_resources[] __initdata = {
DEFINE_RES_MEM(0xfde00000, 0x400),
DEFINE_RES_IRQ(gic_iid(0x89)),
};
static struct sh_eth_plat_data ether_platform_data __initdata = {
.phy = 0x01,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.phy_interface = PHY_INTERFACE_MODE_RMII,
/*
* Although the LINK signal is available on the board, it's connected to
* the link/activity LED output of the PHY, thus the link disappears and
* reappears after each packet. We'd be better off ignoring such signal
* and getting the link state from the PHY indirectly.
*/
.no_ether_link = 1,
};
static struct platform_device_info ether_info __initdata = {
.name = "r8a777x-ether",
.id = -1,
.res = ether_resources,
.num_res = ARRAY_SIZE(ether_resources),
.data = &ether_platform_data,
.size_data = sizeof(ether_platform_data),
.dma_mask = DMA_BIT_MASK(32),
};
/* I2C */
static struct i2c_board_info i2c0_devices[] = {
{
I2C_BOARD_INFO("rx8581", 0x51),
}, {
I2C_BOARD_INFO("ak4643", 0x12),
}
};
/* HSPI*/
static struct mtd_partition m25p80_spi_flash_partitions[] = {
{
.name = "data(spi)",
.size = 0x0100000,
.offset = 0,
},
};
static struct flash_platform_data spi_flash_data = {
.name = "m25p80",
.type = "s25fl008k",
.parts = m25p80_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions),
};
static struct spi_board_info spi_board_info[] __initdata = {
{
.modalias = "m25p80",
.max_speed_hz = 104000000,
.chip_select = 0,
.bus_num = 0,
.mode = SPI_MODE_0,
.platform_data = &spi_flash_data,
},
};
/* MMC */
static struct resource mmc_resources[] __initdata = {
DEFINE_RES_MEM(0xffe4e000, 0x100),
DEFINE_RES_IRQ(gic_iid(0x5d)),
};
static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
.sup_pclk = 0,
.caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
};
/* In the default configuration both decoders reside on I2C bus 0 */
#define BOCKW_CAMERA(idx) \
static struct i2c_board_info camera##idx##_info = { \
I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)), \
}; \
\
static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = { \
.bus_id = idx, \
.i2c_adapter_id = 0, \
.board_info = &camera##idx##_info, \
}
BOCKW_CAMERA(0);
BOCKW_CAMERA(1);
/* VIN */
static struct rcar_vin_platform_data vin_platform_data __initdata = {
.flags = RCAR_VIN_BT656,
};
#define R8A7778_VIN(idx) \
static struct resource vin##idx##_resources[] __initdata = { \
DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
DEFINE_RES_IRQ(gic_iid(0x5a)), \
}; \
\
static struct platform_device_info vin##idx##_info __initdata = { \
.name = "r8a7778-vin", \
.id = idx, \
.res = vin##idx##_resources, \
.num_res = ARRAY_SIZE(vin##idx##_resources), \
.dma_mask = DMA_BIT_MASK(32), \
.data = &vin_platform_data, \
.size_data = sizeof(vin_platform_data), \
}
R8A7778_VIN(0);
R8A7778_VIN(1);
/* Sound */
static struct resource rsnd_resources[] __initdata = {
[RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
[RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
[RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
};
static struct rsnd_ssi_platform_info rsnd_ssi[] = {
RSND_SSI_UNUSED, /* SSI 0 */
RSND_SSI_UNUSED, /* SSI 1 */
RSND_SSI_UNUSED, /* SSI 2 */
RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
};
static struct rsnd_src_platform_info rsnd_src[9] = {
RSND_SRC_UNUSED, /* SRU 0 */
RSND_SRC_UNUSED, /* SRU 1 */
RSND_SRC_UNUSED, /* SRU 2 */
RSND_SRC(0, 0),
RSND_SRC(0, 0),
RSND_SRC(0, 0),
RSND_SRC(0, 0),
RSND_SRC(0, 0),
RSND_SRC(0, 0),
};
static struct rsnd_dai_platform_info rsnd_dai[] = {
{
.playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
.capture = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
}, {
.playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
}, {
.capture = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
}, {
.playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
}, {
.capture = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
},
};
enum {
AK4554_34 = 0,
AK4643_56,
AK4554_78,
SOUND_MAX,
};
static int rsnd_codec_power(int id, int enable)
{
static int sound_user[SOUND_MAX] = {0, 0, 0};
int *usr = NULL;
u32 bit;
switch (id) {
case 3:
case 4:
usr = sound_user + AK4554_34;
bit = (1 << 10);
break;
case 5:
case 6:
usr = sound_user + AK4643_56;
bit = (1 << 6);
break;
case 7:
case 8:
usr = sound_user + AK4554_78;
bit = (1 << 7);
break;
}
if (!usr)
return -EIO;
if (enable) {
if (*usr == 0) {
u32 val = ioread16(fpga + COMCTLR);
val &= ~bit;
iowrite16(val, fpga + COMCTLR);
}
(*usr)++;
} else {
if (*usr == 0)
return 0;
(*usr)--;
if (*usr == 0) {
u32 val = ioread16(fpga + COMCTLR);
val |= bit;
iowrite16(val, fpga + COMCTLR);
}
}
return 0;
}
static int rsnd_start(int id)
{
return rsnd_codec_power(id, 1);
}
static int rsnd_stop(int id)
{
return rsnd_codec_power(id, 0);
}
static struct rcar_snd_info rsnd_info = {
.flags = RSND_GEN1,
.ssi_info = rsnd_ssi,
.ssi_info_nr = ARRAY_SIZE(rsnd_ssi),
.src_info = rsnd_src,
.src_info_nr = ARRAY_SIZE(rsnd_src),
.dai_info = rsnd_dai,
.dai_info_nr = ARRAY_SIZE(rsnd_dai),
.start = rsnd_start,
.stop = rsnd_stop,
};
static struct asoc_simple_card_info rsnd_card_info[] = {
/* SSI5, SSI6 */
{
.name = "AK4643",
.card = "SSI56-AK4643",
.codec = "ak4642-codec.0-0012",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
.cpu_dai = {
.name = "rsnd-dai.0",
},
.codec_dai = {
.name = "ak4642-hifi",
.sysclk = 11289600,
},
},
/* SSI3 */
{
.name = "AK4554",
.card = "SSI3-AK4554(playback)",
.codec = "ak4554-adc-dac.0",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
.cpu_dai = {
.name = "rsnd-dai.1",
},
.codec_dai = {
.name = "ak4554-hifi",
},
},
/* SSI4 */
{
.name = "AK4554",
.card = "SSI4-AK4554(capture)",
.codec = "ak4554-adc-dac.0",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
.cpu_dai = {
.name = "rsnd-dai.2",
},
.codec_dai = {
.name = "ak4554-hifi",
},
},
/* SSI7 */
{
.name = "AK4554",
.card = "SSI7-AK4554(playback)",
.codec = "ak4554-adc-dac.1",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
.cpu_dai = {
.name = "rsnd-dai.3",
},
.codec_dai = {
.name = "ak4554-hifi",
},
},
/* SSI8 */
{
.name = "AK4554",
.card = "SSI8-AK4554(capture)",
.codec = "ak4554-adc-dac.1",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
.cpu_dai = {
.name = "rsnd-dai.4",
},
.codec_dai = {
.name = "ak4554-hifi",
},
}
};
static const struct pinctrl_map bockw_pinctrl_map[] = {
/* AUDIO */
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"audio_clk_a", "audio_clk"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"audio_clk_b", "audio_clk"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi34_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi3_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi4_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi5_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi5_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi6_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi6_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi78_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi7_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
"ssi8_data", "ssi"),
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
"ether_rmii", "ether"),
/* HSPI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
"hspi0_a", "hspi0"),
/* MMC */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
"mmc_data8", "mmc"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
"mmc_ctrl", "mmc"),
/* SCIF0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
"scif0_data_a", "scif0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
"scif0_ctrl", "scif0"),
/* USB */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
"usb0", "usb0"),
PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
"usb1", "usb1"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
"sdhi0_cd", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
"sdhi0_wp", "sdhi0"),
/* VIN0 */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
"vin0_clk", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
"vin0_data8", "vin0"),
/* VIN1 */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
"vin1_clk", "vin1"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
"vin1_data8", "vin1"),
};
#define PFC 0xfffc0000
#define PUPR4 0x110
static void __init bockw_init(void)
{
void __iomem *base;
struct clk *clk;
struct platform_device *pdev;
int i;
r8a7778_clock_init();
r8a7778_init_irq_extpin(1);
r8a7778_add_standard_devices();
platform_device_register_full(&ether_info);
platform_device_register_full(&vin0_info);
/* VIN1 has a pin conflict with Ether */
if (!IS_ENABLED(CONFIG_SH_ETH))
platform_device_register_full(&vin1_info);
platform_device_register_data(NULL, "soc-camera-pdrv", 0,
&iclink0_ml86v7667,
sizeof(iclink0_ml86v7667));
platform_device_register_data(NULL, "soc-camera-pdrv", 1,
&iclink1_ml86v7667,
sizeof(iclink1_ml86v7667));
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
spi_register_board_info(spi_board_info,
ARRAY_SIZE(spi_board_info));
pinctrl_register_mappings(bockw_pinctrl_map,
ARRAY_SIZE(bockw_pinctrl_map));
r8a7778_pinmux_init();
platform_device_register_resndata(
NULL, "sh_mmcif", -1,
mmc_resources, ARRAY_SIZE(mmc_resources),
&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
platform_device_register_resndata(
NULL, "rcar_usb_phy", -1,
usb_phy_resources,
ARRAY_SIZE(usb_phy_resources),
&usb_phy_platform_data,
sizeof(struct rcar_phy_platform_data));
regulator_register_fixed(0, dummy_supplies,
ARRAY_SIZE(dummy_supplies));
regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
/* for SMSC */
fpga = ioremap_nocache(FPGA, SZ_1M);
if (fpga) {
/*
* CAUTION
*
* IRQ0/1 is cascaded interrupt from FPGA.
* it should be cared in the future
* Now, it is assuming IRQ0 was used only from SMSC.
*/
u16 val = ioread16(fpga + IRQ0MR);
val &= ~(1 << 4); /* enable SMSC911x */
iowrite16(val, fpga + IRQ0MR);
platform_device_register_resndata(
NULL, "smsc911x", -1,
smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
&smsc911x_data, sizeof(smsc911x_data));
}
/* for SDHI */
base = ioremap_nocache(PFC, 0x200);
if (base) {
/*
* FIXME
*
* SDHI CD/WP pin needs pull-up
*/
iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
iounmap(base);
platform_device_register_resndata(
NULL, "sh_mobile_sdhi", 0,
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
&sdhi0_info, sizeof(struct tmio_mmc_data));
}
/* for Audio */
rsnd_codec_power(5, 1); /* enable ak4642 */
platform_device_register_simple(
"ak4554-adc-dac", 0, NULL, 0);
platform_device_register_simple(
"ak4554-adc-dac", 1, NULL, 0);
pdev = platform_device_register_resndata(
NULL, "rcar_sound", -1,
rsnd_resources, ARRAY_SIZE(rsnd_resources),
&rsnd_info, sizeof(rsnd_info));
clk = clk_get(&pdev->dev, "clk_b");
clk_set_rate(clk, 24576000);
clk_put(clk);
for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
struct platform_device_info cardinfo = {
.name = "asoc-simple-card",
.id = i,
.data = &rsnd_card_info[i],
.size_data = sizeof(struct asoc_simple_card_info),
.dma_mask = DMA_BIT_MASK(32),
};
platform_device_register_full(&cardinfo);
}
}
static void __init bockw_init_late(void)
{
r8a7778_init_late();
ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
}
static const char *const bockw_boards_compat_dt[] __initconst = {
"renesas,bockw",
NULL,
};
DT_MACHINE_START(BOCKW_DT, "bockw")
.init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = bockw_init,
.dt_compat = bockw_boards_compat_dt,
.init_late = bockw_init_late,
MACHINE_END

342
arch/arm/mach-shmobile/clock-r8a7778.c
Просмотреть файл

@ -1,342 +0,0 @@
/*
* r8a7778 clock framework support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* based on r8a7779
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2011 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* MD MD MD MD PLLA PLLB EXTAL clki clkz
* 19 18 12 11 (HMz) (MHz) (MHz)
*----------------------------------------------------------------------------
* 1 0 0 0 x21 x21 38.00 800 800
* 1 0 0 1 x24 x24 33.33 800 800
* 1 0 1 0 x28 x28 28.50 800 800
* 1 0 1 1 x32 x32 25.00 800 800
* 1 1 0 1 x24 x21 33.33 800 700
* 1 1 1 0 x28 x21 28.50 800 600
* 1 1 1 1 x32 x24 25.00 800 600
*/
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include "clock.h"
#include "common.h"
#define MSTPCR0 IOMEM(0xffc80030)
#define MSTPCR1 IOMEM(0xffc80034)
#define MSTPCR3 IOMEM(0xffc8003c)
#define MSTPSR1 IOMEM(0xffc80044)
#define MSTPSR4 IOMEM(0xffc80048)
#define MSTPSR6 IOMEM(0xffc8004c)
#define MSTPCR4 IOMEM(0xffc80050)
#define MSTPCR5 IOMEM(0xffc80054)
#define MSTPCR6 IOMEM(0xffc80058)
#define MODEMR 0xFFCC0020
#define MD(nr) BIT(nr)
/* ioremap() through clock mapping mandatory to avoid
* collision with ARM coherent DMA virtual memory range.
*/
static struct clk_mapping cpg_mapping = {
.phys = 0xffc80000,
.len = 0x80,
};
static struct clk extal_clk = {
/* .rate will be updated on r8a7778_clock_init() */
.mapping = &cpg_mapping,
};
static struct clk audio_clk_a = {
};
static struct clk audio_clk_b = {
};
static struct clk audio_clk_c = {
};
/*
* clock ratio of these clock will be updated
* on r8a7778_clock_init()
*/
SH_FIXED_RATIO_CLK_SET(plla_clk, extal_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(pllb_clk, extal_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(i_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(s_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(s1_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(s3_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(s4_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(b_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(out_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(p_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(g_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(z_clk, pllb_clk, 1, 1);
static struct clk *main_clks[] = {
&extal_clk,
&plla_clk,
&pllb_clk,
&i_clk,
&s_clk,
&s1_clk,
&s3_clk,
&s4_clk,
&b_clk,
&out_clk,
&p_clk,
&g_clk,
&z_clk,
&audio_clk_a,
&audio_clk_b,
&audio_clk_c,
};
enum {
MSTP531, MSTP530,
MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523,
MSTP331,
MSTP323, MSTP322, MSTP321,
MSTP311, MSTP310,
MSTP309, MSTP308, MSTP307,
MSTP114,
MSTP110, MSTP109,
MSTP100,
MSTP030,
MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
MSTP009, MSTP008, MSTP007,
MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */
[MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */
[MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */
[MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */
[MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */
[MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */
[MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */
[MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */
[MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */
[MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */
[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
[MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
[MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
[MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 9, 0), /* SSI6 */
[MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 8, 0), /* SSI7 */
[MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 7, 0), /* SSI8 */
[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 9, 0), /* VIN1 */
[MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 0, 0), /* USB0/1 */
[MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */
[MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */
[MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */
[MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */
[MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */
[MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */
[MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */
[MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */
[MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */
[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
[MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
[MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */
[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */
[MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */
};
static struct clk_lookup lookups[] = {
/* main */
CLKDEV_CON_ID("shyway_clk", &s_clk),
CLKDEV_CON_ID("peripheral_clk", &p_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]),
CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]),
};
void __init r8a7778_clock_init(void)
{
void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
u32 mode;
int k, ret = 0;
BUG_ON(!modemr);
mode = ioread32(modemr);
iounmap(modemr);
switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) {
case MD(19):
extal_clk.rate = 38000000;
SH_CLK_SET_RATIO(&plla_clk_ratio, 21, 1);
SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
break;
case MD(19) | MD(11):
extal_clk.rate = 33333333;
SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1);
SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1);
break;
case MD(19) | MD(12):
extal_clk.rate = 28500000;
SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1);
SH_CLK_SET_RATIO(&pllb_clk_ratio, 28, 1);
break;
case MD(19) | MD(12) | MD(11):
extal_clk.rate = 25000000;
SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1);
SH_CLK_SET_RATIO(&pllb_clk_ratio, 32, 1);
break;
case MD(19) | MD(18) | MD(11):
extal_clk.rate = 33333333;
SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1);
SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
break;
case MD(19) | MD(18) | MD(12):
extal_clk.rate = 28500000;
SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1);
SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
break;
case MD(19) | MD(18) | MD(12) | MD(11):
extal_clk.rate = 25000000;
SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1);
SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1);
break;
default:
BUG();
}
if (mode & MD(1)) {
SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1);
SH_CLK_SET_RATIO(&s_clk_ratio, 1, 3);
SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 6);
SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4);
SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&p_clk_ratio, 1, 12);
SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12);
if (mode & MD(2)) {
SH_CLK_SET_RATIO(&b_clk_ratio, 1, 18);
SH_CLK_SET_RATIO(&out_clk_ratio, 1, 18);
} else {
SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12);
SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12);
}
} else {
SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1);
SH_CLK_SET_RATIO(&s_clk_ratio, 1, 4);
SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4);
SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&p_clk_ratio, 1, 16);
SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12);
if (mode & MD(2)) {
SH_CLK_SET_RATIO(&b_clk_ratio, 1, 16);
SH_CLK_SET_RATIO(&out_clk_ratio, 1, 16);
} else {
SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12);
SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12);
}
}
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
shmobile_clk_init();
else
panic("failed to setup r8a7778 clocks\n");
}

47
arch/arm/mach-shmobile/clock.c
Просмотреть файл

@ -1,47 +0,0 @@
/*
* SH-Mobile Clock Framework
*
* Copyright (C) 2010 Magnus Damm
*
* Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sh_clk.h>
#include "clock.h"
#include "common.h"
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
{
struct clk_ratio *p = clk->priv;
return clk->parent->rate / p->div * p->mul;
};
struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
.recalc = shmobile_fixed_ratio_clk_recalc,
};
int __init shmobile_clk_init(void)
{
/* Kick the child clocks.. */
recalculate_root_clocks();
/* Enable the necessary init clocks */
clk_enable_init_clocks();
return 0;
}

42
arch/arm/mach-shmobile/clock.h
Просмотреть файл

@ -1,42 +0,0 @@
#ifndef CLOCK_H
#define CLOCK_H
/* legacy clock implementation */
struct clk;
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
/* clock ratio */
struct clk_ratio {
int mul;
int div;
};
#define SH_CLK_RATIO(name, m, d) \
static struct clk_ratio name ##_ratio = { \
.mul = m, \
.div = d, \
}
#define SH_FIXED_RATIO_CLKg(name, p, r) \
struct clk name = { \
.parent = &p, \
.ops = &shmobile_fixed_ratio_clk_ops,\
.priv = &r ## _ratio, \
}
#define SH_FIXED_RATIO_CLK(name, p, r) \
static SH_FIXED_RATIO_CLKg(name, p, r)
#define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \
SH_CLK_RATIO(name, m, d); \
SH_FIXED_RATIO_CLK(name, p, name)
#define SH_CLK_SET_RATIO(p, m, d) \
do { \
(p)->mul = m; \
(p)->div = d; \
} while (0)
#endif

5
arch/arm/mach-shmobile/common.h
Просмотреть файл

@ -1,10 +1,7 @@
#ifndef __ARCH_MACH_COMMON_H
#define __ARCH_MACH_COMMON_H
extern void shmobile_earlytimer_init(void);
extern void shmobile_init_delay(void);
struct twd_local_timer;
extern void shmobile_setup_console(void);
extern void shmobile_boot_vector(void);
extern unsigned long shmobile_boot_fn;
extern unsigned long shmobile_boot_arg;
@ -18,8 +15,6 @@ extern void shmobile_boot_scu(void);
extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
struct clk;
extern int shmobile_clk_init(void);
extern struct platform_suspend_ops shmobile_suspend_ops;
#ifdef CONFIG_SUSPEND

27
arch/arm/mach-shmobile/console.c
Просмотреть файл

@ -1,27 +0,0 @@
/*
* SH-Mobile Console
*
* Copyright (C) 2010 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/map.h>
#include "common.h"
void __init shmobile_setup_console(void)
{
parse_early_param();
/* Let earlyprintk output early console messages */
early_platform_driver_probe("earlyprintk", 1, 1);
}

295
arch/arm/mach-shmobile/intc.h
Просмотреть файл

@ -1,295 +0,0 @@
#ifndef __ASM_MACH_INTC_H
#define __ASM_MACH_INTC_H
#include <linux/sh_intc.h>
#define INTC_IRQ_PINS_ENUM_16L(p) \
p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7, \
p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
#define INTC_IRQ_PINS_ENUM_16H(p) \
p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23, \
p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
#define INTC_IRQ_PINS_VECT_16L(p, vect) \
vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220), \
vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260), \
vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0), \
vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0), \
vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320), \
vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360), \
vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0), \
vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
#define INTC_IRQ_PINS_VECT_16H(p, vect) \
vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220), \
vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260), \
vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0), \
vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0), \
vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320), \
vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360), \
vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0), \
vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
#define INTC_IRQ_PINS_MASK_16L(p, base) \
{ base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */ \
{ p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
{ base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */ \
{ p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
#define INTC_IRQ_PINS_MASK_16H(p, base) \
{ base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */ \
{ p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
{ base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */ \
{ p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
#define INTC_IRQ_PINS_PRIO_16L(p, base) \
{ base + 0x10, 0, 32, 4, /* INTPRI00A */ \
{ p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
{ base + 0x14, 0, 32, 4, /* INTPRI10A */ \
{ p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
#define INTC_IRQ_PINS_PRIO_16H(p, base) \
{ base + 0x18, 0, 32, 4, /* INTPRI20A */ \
{ p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
{ base + 0x1c, 0, 32, 4, /* INTPRI30A */ \
{ p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
#define INTC_IRQ_PINS_SENSE_16L(p, base) \
{ base + 0x00, 32, 4, /* ICR1A */ \
{ p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
{ base + 0x04, 32, 4, /* ICR2A */ \
{ p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
#define INTC_IRQ_PINS_SENSE_16H(p, base) \
{ base + 0x08, 32, 4, /* ICR3A */ \
{ p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
{ base + 0x0c, 32, 4, /* ICR4A */ \
{ p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
#define INTC_IRQ_PINS_ACK_16L(p, base) \
{ base + 0x20, 0, 8, /* INTREQ00A */ \
{ p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
{ base + 0x24, 0, 8, /* INTREQ10A */ \
{ p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
#define INTC_IRQ_PINS_ACK_16H(p, base) \
{ base + 0x28, 0, 8, /* INTREQ20A */ \
{ p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
{ base + 0x2c, 0, 8, /* INTREQ30A */ \
{ p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
#define INTC_IRQ_PINS_16(p, base, vect, str) \
\
static struct resource p ## _resources[] __initdata = { \
[0] = { \
.start = base, \
.end = base + 0x64, \
.flags = IORESOURCE_MEM, \
}, \
}; \
\
enum { \
p ## _UNUSED = 0, \
INTC_IRQ_PINS_ENUM_16L(p), \
}; \
\
static struct intc_vect p ## _vectors[] __initdata = { \
INTC_IRQ_PINS_VECT_16L(p, vect), \
}; \
\
static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
INTC_IRQ_PINS_MASK_16L(p, base), \
}; \
\
static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
INTC_IRQ_PINS_PRIO_16L(p, base), \
}; \
\
static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
INTC_IRQ_PINS_SENSE_16L(p, base), \
}; \
\
static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
INTC_IRQ_PINS_ACK_16L(p, base), \
}; \
\
static struct intc_desc p ## _desc __initdata = { \
.name = str, \
.resource = p ## _resources, \
.num_resources = ARRAY_SIZE(p ## _resources), \
.hw = INTC_HW_DESC(p ## _vectors, NULL, \
p ## _mask_registers, p ## _prio_registers, \
p ## _sense_registers, p ## _ack_registers) \
}
#define INTC_IRQ_PINS_16H(p, base, vect, str) \
\
static struct resource p ## _resources[] __initdata = { \
[0] = { \
.start = base, \
.end = base + 0x64, \
.flags = IORESOURCE_MEM, \
}, \
}; \
\
enum { \
p ## _UNUSED = 0, \
INTC_IRQ_PINS_ENUM_16H(p), \
}; \
\
static struct intc_vect p ## _vectors[] __initdata = { \
INTC_IRQ_PINS_VECT_16H(p, vect), \
}; \
\
static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
INTC_IRQ_PINS_MASK_16H(p, base), \
}; \
\
static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
INTC_IRQ_PINS_PRIO_16H(p, base), \
}; \
\
static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
INTC_IRQ_PINS_SENSE_16H(p, base), \
}; \
\
static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
INTC_IRQ_PINS_ACK_16H(p, base), \
}; \
\
static struct intc_desc p ## _desc __initdata = { \
.name = str, \
.resource = p ## _resources, \
.num_resources = ARRAY_SIZE(p ## _resources), \
.hw = INTC_HW_DESC(p ## _vectors, NULL, \
p ## _mask_registers, p ## _prio_registers, \
p ## _sense_registers, p ## _ack_registers) \
}
#define INTC_IRQ_PINS_32(p, base, vect, str) \
\
static struct resource p ## _resources[] __initdata = { \
[0] = { \
.start = base, \
.end = base + 0x6c, \
.flags = IORESOURCE_MEM, \
}, \
}; \
\
enum { \
p ## _UNUSED = 0, \
INTC_IRQ_PINS_ENUM_16L(p), \
INTC_IRQ_PINS_ENUM_16H(p), \
}; \
\
static struct intc_vect p ## _vectors[] __initdata = { \
INTC_IRQ_PINS_VECT_16L(p, vect), \
INTC_IRQ_PINS_VECT_16H(p, vect), \
}; \
\
static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
INTC_IRQ_PINS_MASK_16L(p, base), \
INTC_IRQ_PINS_MASK_16H(p, base), \
}; \
\
static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
INTC_IRQ_PINS_PRIO_16L(p, base), \
INTC_IRQ_PINS_PRIO_16H(p, base), \
}; \
\
static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
INTC_IRQ_PINS_SENSE_16L(p, base), \
INTC_IRQ_PINS_SENSE_16H(p, base), \
}; \
\
static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
INTC_IRQ_PINS_ACK_16L(p, base), \
INTC_IRQ_PINS_ACK_16H(p, base), \
}; \
\
static struct intc_desc p ## _desc __initdata = { \
.name = str, \
.resource = p ## _resources, \
.num_resources = ARRAY_SIZE(p ## _resources), \
.hw = INTC_HW_DESC(p ## _vectors, NULL, \
p ## _mask_registers, p ## _prio_registers, \
p ## _sense_registers, p ## _ack_registers) \
}
#define INTC_PINT_E_EMPTY
#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
#define INTC_PINT_E(p) \
PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3, \
PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
#define INTC_PINT_V_NONE
#define INTC_PINT_V(p, vect) \
vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1), \
vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3), \
vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5), \
vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
#define INTC_PINT(p, mask_reg, sense_base, str, \
enums_1, enums_2, enums_3, enums_4, \
vect_1, vect_2, vect_3, vect_4, \
mask_a, mask_b, mask_c, mask_d, \
sense_a, sense_b, sense_c, sense_d) \
\
enum { \
PINT ## p ## _UNUSED = 0, \
enums_1 enums_2 enums_3 enums_4 \
}; \
\
static struct intc_vect p ## _vectors[] __initdata = { \
vect_1 vect_2 vect_3 vect_4 \
}; \
\
static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
{ mask_reg, 0, 32, /* PINTER */ \
{ mask_a mask_b mask_c mask_d } } \
}; \
\
static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
{ sense_base + 0x00, 16, 2, /* PINTCR */ \
{ sense_a } }, \
{ sense_base + 0x04, 16, 2, /* PINTCR */ \
{ sense_b } }, \
{ sense_base + 0x08, 16, 2, /* PINTCR */ \
{ sense_c } }, \
{ sense_base + 0x0c, 16, 2, /* PINTCR */ \
{ sense_d } }, \
}; \
\
static struct intc_desc p ## _desc __initdata = { \
.name = str, \
.hw = INTC_HW_DESC(p ## _vectors, NULL, \
p ## _mask_registers, NULL, \
p ## _sense_registers, NULL), \
}
/* INTCS */
#define INTCS_VECT_BASE 0x3400
#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
#endif /* __ASM_MACH_INTC_H */

4
arch/arm/mach-shmobile/platsmp-apmu.c
Просмотреть файл

@ -88,7 +88,7 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit)
static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
struct rcar_apmu_config *apmu_config, int num)
{
u32 id;
int id;
int k;
int bit, index;
bool is_allowed;
@ -170,7 +170,7 @@ static inline void cpu_enter_lowpower_a15(void)
dsb();
}
void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
{
/* Select next sleep mode using the APMU */

99
arch/arm/mach-shmobile/pm-r8a7779.c
Просмотреть файл

@ -9,20 +9,8 @@
* for more details.
*/
#include <linux/pm.h>
#include <linux/suspend.h>
#include <linux/err.h>
#include <linux/pm_clock.h>
#include <linux/pm_domain.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/console.h>
#include <asm/io.h>
#include "common.h"
#include "pm-rcar.h"
#include "r8a7779.h"
@ -30,17 +18,6 @@
#define SYSCIER 0x0c
#define SYSCIMR 0x10
struct r8a7779_pm_domain {
struct generic_pm_domain genpd;
struct rcar_sysc_ch ch;
};
static inline
const struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
{
return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
}
#if defined(CONFIG_PM) || defined(CONFIG_SMP)
static void __init r8a7779_sysc_init(void)
@ -58,82 +35,6 @@ static inline void r8a7779_sysc_init(void) {}
#endif /* CONFIG_PM || CONFIG_SMP */
#ifdef CONFIG_PM
static int pd_power_down(struct generic_pm_domain *genpd)
{
return rcar_sysc_power_down(to_r8a7779_ch(genpd));
}
static int pd_power_up(struct generic_pm_domain *genpd)
{
return rcar_sysc_power_up(to_r8a7779_ch(genpd));
}
static bool pd_is_off(struct generic_pm_domain *genpd)
{
return rcar_sysc_power_is_off(to_r8a7779_ch(genpd));
}
static bool pd_active_wakeup(struct device *dev)
{
return true;
}
static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
{
struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
pm_genpd_init(genpd, NULL, false);
genpd->dev_ops.active_wakeup = pd_active_wakeup;
genpd->power_off = pd_power_down;
genpd->power_on = pd_power_up;
if (pd_is_off(&r8a7779_pd->genpd))
pd_power_up(&r8a7779_pd->genpd);
}
static struct r8a7779_pm_domain r8a7779_pm_domains[] = {
{
.genpd.name = "SH4A",
.ch = {
.chan_offs = 0x80, /* PWRSR1 .. PWRER1 */
.isr_bit = 16, /* SH4A */
},
},
{
.genpd.name = "SGX",
.ch = {
.chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */
.isr_bit = 20, /* SGX */
},
},
{
.genpd.name = "VDP1",
.ch = {
.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
.isr_bit = 21, /* VDP */
},
},
{
.genpd.name = "IMPX3",
.ch = {
.chan_offs = 0x140, /* PWRSR4 .. PWRER4 */
.isr_bit = 24, /* IMP */
},
},
};
void __init r8a7779_init_pm_domains(void)
{
int j;
for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++)
r8a7779_init_pm_domain(&r8a7779_pm_domains[j]);
}
#endif /* CONFIG_PM */
void __init r8a7779_pm_init(void)
{
static int once;

4
arch/arm/mach-shmobile/pm-rmobile.c
Просмотреть файл

@ -342,8 +342,10 @@ static int __init rmobile_add_pm_domains(void __iomem *base,
}
pd = kzalloc(sizeof(*pd), GFP_KERNEL);
if (!pd)
if (!pd) {
of_node_put(np);
return -ENOMEM;
}
pd->genpd.name = np->name;
pd->base = base;

9
arch/arm/mach-shmobile/pm-rmobile.h
Просмотреть файл

@ -12,10 +12,6 @@
#include <linux/pm_domain.h>
#define DEFAULT_DEV_LATENCY_NS 250000
struct platform_device;
struct rmobile_pm_domain {
struct generic_pm_domain genpd;
struct dev_power_governor *gov;
@ -26,9 +22,4 @@ struct rmobile_pm_domain {
bool no_debug;
};
struct pm_domain_device {
const char *domain_name;
struct platform_device *pdev;
};
#endif /* PM_RMOBILE_H */

78
arch/arm/mach-shmobile/r8a7778.h
Просмотреть файл

@ -1,78 +0,0 @@
/*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
* Copyright (C) 2013 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_R8A7778_H__
#define __ASM_R8A7778_H__
#include <linux/sh_eth.h>
/* HPB-DMA slave IDs */
enum {
HPBDMA_SLAVE_DUMMY,
HPBDMA_SLAVE_SDHI0_TX,
HPBDMA_SLAVE_SDHI0_RX,
HPBDMA_SLAVE_SSI0_TX,
HPBDMA_SLAVE_SSI0_RX,
HPBDMA_SLAVE_SSI1_TX,
HPBDMA_SLAVE_SSI1_RX,
HPBDMA_SLAVE_SSI2_TX,
HPBDMA_SLAVE_SSI2_RX,
HPBDMA_SLAVE_SSI3_TX,
HPBDMA_SLAVE_SSI3_RX,
HPBDMA_SLAVE_SSI4_TX,
HPBDMA_SLAVE_SSI4_RX,
HPBDMA_SLAVE_SSI5_TX,
HPBDMA_SLAVE_SSI5_RX,
HPBDMA_SLAVE_SSI6_TX,
HPBDMA_SLAVE_SSI6_RX,
HPBDMA_SLAVE_SSI7_TX,
HPBDMA_SLAVE_SSI7_RX,
HPBDMA_SLAVE_SSI8_TX,
HPBDMA_SLAVE_SSI8_RX,
HPBDMA_SLAVE_HPBIF0_TX,
HPBDMA_SLAVE_HPBIF0_RX,
HPBDMA_SLAVE_HPBIF1_TX,
HPBDMA_SLAVE_HPBIF1_RX,
HPBDMA_SLAVE_HPBIF2_TX,
HPBDMA_SLAVE_HPBIF2_RX,
HPBDMA_SLAVE_HPBIF3_TX,
HPBDMA_SLAVE_HPBIF3_RX,
HPBDMA_SLAVE_HPBIF4_TX,
HPBDMA_SLAVE_HPBIF4_RX,
HPBDMA_SLAVE_HPBIF5_TX,
HPBDMA_SLAVE_HPBIF5_RX,
HPBDMA_SLAVE_HPBIF6_TX,
HPBDMA_SLAVE_HPBIF6_RX,
HPBDMA_SLAVE_HPBIF7_TX,
HPBDMA_SLAVE_HPBIF7_RX,
HPBDMA_SLAVE_HPBIF8_TX,
HPBDMA_SLAVE_HPBIF8_RX,
HPBDMA_SLAVE_USBFUNC_TX,
HPBDMA_SLAVE_USBFUNC_RX,
};
extern void r8a7778_add_standard_devices(void);
extern void r8a7778_add_standard_devices_dt(void);
extern void r8a7778_add_dt_devices(void);
extern void r8a7778_init_late(void);
extern void r8a7778_init_irq_dt(void);
extern void r8a7778_clock_init(void);
extern void r8a7778_init_irq_extpin(int irlm);
extern void r8a7778_init_irq_extpin_dt(int irlm);
extern void r8a7778_pinmux_init(void);
extern int r8a7778_usb_phy_power(bool enable);
#endif /* __ASM_R8A7778_H__ */

8
arch/arm/mach-shmobile/r8a7779.h
Просмотреть файл

@ -1,16 +1,8 @@
#ifndef __ASM_R8A7779_H__
#define __ASM_R8A7779_H__
#include <linux/sh_clk.h>
extern void r8a7779_pm_init(void);
#ifdef CONFIG_PM
extern void __init r8a7779_init_pm_domains(void);
#else
static inline void r8a7779_init_pm_domains(void) {}
#endif /* CONFIG_PM */
extern struct smp_operations r8a7779_smp_ops;
#endif /* __ASM_R8A7779_H__ */

563
arch/arm/mach-shmobile/setup-r8a7778.c
Просмотреть файл

@ -16,35 +16,16 @@
*/
#include <linux/clk/shmobile.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_data/dma-rcar-hpbdma.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/platform_device.h>
#include <linux/irqchip.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
#include <linux/pm_runtime.h>
#include <linux/usb/phy.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
#include "common.h"
#include "irqs.h"
#include "r8a7778.h"
#define MODEMR 0xffcc0020
#ifdef CONFIG_COMMON_CLK
static void __init r8a7778_timer_init(void)
{
u32 mode;
@ -55,555 +36,21 @@ static void __init r8a7778_timer_init(void)
iounmap(modemr);
r8a7778_clocks_init(mode);
}
#endif
/* SCIF */
#define R8A7778_SCIF(index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \
.type = PORT_SCIF, \
}; \
\
static struct resource scif##index##_resources[] = { \
DEFINE_RES_MEM(baseaddr, 0x100), \
DEFINE_RES_IRQ(irq), \
}
R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67));
R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68));
R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69));
R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
#define r8a7778_register_scif(index) \
platform_device_register_resndata(NULL, "sh-sci", index, \
scif##index##_resources, \
ARRAY_SIZE(scif##index##_resources), \
&scif##index##_platform_data, \
sizeof(scif##index##_platform_data))
/* TMU */
static struct sh_timer_config sh_tmu0_platform_data = {
.channels_mask = 7,
};
static struct resource sh_tmu0_resources[] = {
DEFINE_RES_MEM(0xffd80000, 0x30),
DEFINE_RES_IRQ(gic_iid(0x40)),
DEFINE_RES_IRQ(gic_iid(0x41)),
DEFINE_RES_IRQ(gic_iid(0x42)),
};
#define r8a7778_register_tmu(idx) \
platform_device_register_resndata( \
NULL, "sh-tmu", idx, \
sh_tmu##idx##_resources, \
ARRAY_SIZE(sh_tmu##idx##_resources), \
&sh_tmu##idx##_platform_data, \
sizeof(sh_tmu##idx##_platform_data))
int r8a7778_usb_phy_power(bool enable)
{
static struct usb_phy *phy = NULL;
int ret = 0;
if (!phy)
phy = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR(phy)) {
pr_err("kernel doesn't have usb phy driver\n");
return PTR_ERR(phy);
}
if (enable)
ret = usb_phy_init(phy);
else
usb_phy_shutdown(phy);
return ret;
}
/* USB */
static int usb_power_on(struct platform_device *pdev)
{
int ret = r8a7778_usb_phy_power(true);
if (ret)
return ret;
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
return 0;
}
static void usb_power_off(struct platform_device *pdev)
{
if (r8a7778_usb_phy_power(false))
return;
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
}
static int ehci_init_internal_buffer(struct usb_hcd *hcd)
{
/*
* Below are recommended values from the datasheet;
* see [USB :: Setting of EHCI Internal Buffer].
*/
/* EHCI IP internal buffer setting */
iowrite32(0x00ff0040, hcd->regs + 0x0094);
/* EHCI IP internal buffer enable */
iowrite32(0x00000001, hcd->regs + 0x009C);
return 0;
}
static struct usb_ehci_pdata ehci_pdata __initdata = {
.power_on = usb_power_on,
.power_off = usb_power_off,
.power_suspend = usb_power_off,
.pre_setup = ehci_init_internal_buffer,
};
static struct resource ehci_resources[] __initdata = {
DEFINE_RES_MEM(0xffe70000, 0x400),
DEFINE_RES_IRQ(gic_iid(0x4c)),
};
static struct usb_ohci_pdata ohci_pdata __initdata = {
.power_on = usb_power_on,
.power_off = usb_power_off,
.power_suspend = usb_power_off,
};
static struct resource ohci_resources[] __initdata = {
DEFINE_RES_MEM(0xffe70400, 0x400),
DEFINE_RES_IRQ(gic_iid(0x4c)),
};
#define USB_PLATFORM_INFO(hci) \
static struct platform_device_info hci##_info __initdata = { \
.name = #hci "-platform", \
.id = -1, \
.res = hci##_resources, \
.num_res = ARRAY_SIZE(hci##_resources), \
.data = &hci##_pdata, \
.size_data = sizeof(hci##_pdata), \
.dma_mask = DMA_BIT_MASK(32), \
}
USB_PLATFORM_INFO(ehci);
USB_PLATFORM_INFO(ohci);
/* PFC/GPIO */
static struct resource pfc_resources[] __initdata = {
DEFINE_RES_MEM(0xfffc0000, 0x118),
};
#define R8A7778_GPIO(idx) \
static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \
DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \
DEFINE_RES_IRQ(gic_iid(0x87)), \
}; \
\
static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
.gpio_base = 32 * (idx), \
.irq_base = GPIO_IRQ_BASE(idx), \
.number_of_pins = 32, \
.pctl_name = "pfc-r8a7778", \
}
R8A7778_GPIO(0);
R8A7778_GPIO(1);
R8A7778_GPIO(2);
R8A7778_GPIO(3);
R8A7778_GPIO(4);
#define r8a7778_register_gpio(idx) \
platform_device_register_resndata( \
NULL, "gpio_rcar", idx, \
r8a7778_gpio##idx##_resources, \
ARRAY_SIZE(r8a7778_gpio##idx##_resources), \
&r8a7778_gpio##idx##_platform_data, \
sizeof(r8a7778_gpio##idx##_platform_data))
void __init r8a7778_pinmux_init(void)
{
platform_device_register_simple(
"pfc-r8a7778", -1,
pfc_resources,
ARRAY_SIZE(pfc_resources));
r8a7778_register_gpio(0);
r8a7778_register_gpio(1);
r8a7778_register_gpio(2);
r8a7778_register_gpio(3);
r8a7778_register_gpio(4);
};
/* I2C */
static struct resource i2c_resources[] __initdata = {
/* I2C0 */
DEFINE_RES_MEM(0xffc70000, 0x1000),
DEFINE_RES_IRQ(gic_iid(0x63)),
/* I2C1 */
DEFINE_RES_MEM(0xffc71000, 0x1000),
DEFINE_RES_IRQ(gic_iid(0x6e)),
/* I2C2 */
DEFINE_RES_MEM(0xffc72000, 0x1000),
DEFINE_RES_IRQ(gic_iid(0x6c)),
/* I2C3 */
DEFINE_RES_MEM(0xffc73000, 0x1000),
DEFINE_RES_IRQ(gic_iid(0x6d)),
};
static void __init r8a7778_register_i2c(int id)
{
BUG_ON(id < 0 || id > 3);
platform_device_register_simple(
"i2c-rcar", id,
i2c_resources + (2 * id), 2);
}
/* HSPI */
static struct resource hspi_resources[] __initdata = {
/* HSPI0 */
DEFINE_RES_MEM(0xfffc7000, 0x18),
DEFINE_RES_IRQ(gic_iid(0x5f)),
/* HSPI1 */
DEFINE_RES_MEM(0xfffc8000, 0x18),
DEFINE_RES_IRQ(gic_iid(0x74)),
/* HSPI2 */
DEFINE_RES_MEM(0xfffc6000, 0x18),
DEFINE_RES_IRQ(gic_iid(0x75)),
};
static void __init r8a7778_register_hspi(int id)
{
BUG_ON(id < 0 || id > 2);
platform_device_register_simple(
"sh-hspi", id,
hspi_resources + (2 * id), 2);
}
void __init r8a7778_add_dt_devices(void)
{
#ifdef CONFIG_CACHE_L2X0
void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
if (base) {
/*
* Shared attribute override enable, 64K*16way
* don't call iounmap(base)
*/
l2x0_init(base, 0x00400000, 0xc20f0fff);
}
#endif
}
/* HPB-DMA */
/* Asynchronous mode register (ASYNCMDR) bits */
#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */
#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */
#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */
#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */
#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */
#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */
#define HPBDMA_SSI(_id) \
{ \
.id = HPBDMA_SLAVE_SSI## _id ##_TX, \
.addr = 0xffd91008 + (_id * 0x40), \
.dcr = HPB_DMAE_DCR_CT | \
HPB_DMAE_DCR_DIP | \
HPB_DMAE_DCR_SPDS_32BIT | \
HPB_DMAE_DCR_DMDL | \
HPB_DMAE_DCR_DPDS_32BIT, \
.port = _id + (_id << 8), \
.dma_ch = (28 + _id), \
}, { \
.id = HPBDMA_SLAVE_SSI## _id ##_RX, \
.addr = 0xffd9100c + (_id * 0x40), \
.dcr = HPB_DMAE_DCR_CT | \
HPB_DMAE_DCR_DIP | \
HPB_DMAE_DCR_SMDL | \
HPB_DMAE_DCR_SPDS_32BIT | \
HPB_DMAE_DCR_DPDS_32BIT, \
.port = _id + (_id << 8), \
.dma_ch = (28 + _id), \
}
#define HPBDMA_HPBIF(_id) \
{ \
.id = HPBDMA_SLAVE_HPBIF## _id ##_TX, \
.addr = 0xffda0000 + (_id * 0x1000), \
.dcr = HPB_DMAE_DCR_CT | \
HPB_DMAE_DCR_DIP | \
HPB_DMAE_DCR_SPDS_32BIT | \
HPB_DMAE_DCR_DMDL | \
HPB_DMAE_DCR_DPDS_32BIT, \
.port = 0x1111, \
.dma_ch = (28 + _id), \
}, { \
.id = HPBDMA_SLAVE_HPBIF## _id ##_RX, \
.addr = 0xffda0000 + (_id * 0x1000), \
.dcr = HPB_DMAE_DCR_CT | \
HPB_DMAE_DCR_DIP | \
HPB_DMAE_DCR_SMDL | \
HPB_DMAE_DCR_SPDS_32BIT | \
HPB_DMAE_DCR_DPDS_32BIT, \
.port = 0x1111, \
.dma_ch = (28 + _id), \
}
static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
{
.id = HPBDMA_SLAVE_SDHI0_TX,
.addr = 0xffe4c000 + 0x30,
.dcr = HPB_DMAE_DCR_SPDS_16BIT |
HPB_DMAE_DCR_DMDL |
HPB_DMAE_DCR_DPDS_16BIT,
.rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
HPB_DMAE_ASYNCRSTR_ASRST22 |
HPB_DMAE_ASYNCRSTR_ASRST23,
.mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
.mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK,
.port = 0x0D0C,
.flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
.dma_ch = 21,
}, {
.id = HPBDMA_SLAVE_SDHI0_RX,
.addr = 0xffe4c000 + 0x30,
.dcr = HPB_DMAE_DCR_SMDL |
HPB_DMAE_DCR_SPDS_16BIT |
HPB_DMAE_DCR_DPDS_16BIT,
.rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
HPB_DMAE_ASYNCRSTR_ASRST22 |
HPB_DMAE_ASYNCRSTR_ASRST23,
.mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
.mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK,
.port = 0x0D0C,
.flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
.dma_ch = 22,
}, {
.id = HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
.addr = 0xffe60018,
.dcr = HPB_DMAE_DCR_SPDS_32BIT |
HPB_DMAE_DCR_DMDL |
HPB_DMAE_DCR_DPDS_32BIT,
.port = 0x0000,
.dma_ch = 14,
}, {
.id = HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
.addr = 0xffe6001c,
.dcr = HPB_DMAE_DCR_SMDL |
HPB_DMAE_DCR_SPDS_32BIT |
HPB_DMAE_DCR_DPDS_32BIT,
.port = 0x0101,
.dma_ch = 15,
},
HPBDMA_SSI(0),
HPBDMA_SSI(1),
HPBDMA_SSI(2),
HPBDMA_SSI(3),
HPBDMA_SSI(4),
HPBDMA_SSI(5),
HPBDMA_SSI(6),
HPBDMA_SSI(7),
HPBDMA_SSI(8),
HPBDMA_HPBIF(0),
HPBDMA_HPBIF(1),
HPBDMA_HPBIF(2),
HPBDMA_HPBIF(3),
HPBDMA_HPBIF(4),
HPBDMA_HPBIF(5),
HPBDMA_HPBIF(6),
HPBDMA_HPBIF(7),
HPBDMA_HPBIF(8),
};
static const struct hpb_dmae_channel hpb_dmae_channels[] = {
HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX), /* ch. 28 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX), /* ch. 29 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX), /* ch. 29 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX), /* ch. 30 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX), /* ch. 30 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX), /* ch. 31 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX), /* ch. 31 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX), /* ch. 32 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX), /* ch. 32 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX), /* ch. 33 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX), /* ch. 33 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX), /* ch. 34 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX), /* ch. 34 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX), /* ch. 35 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX), /* ch. 35 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX), /* ch. 36 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX), /* ch. 36 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
};
static struct hpb_dmae_pdata dma_platform_data __initdata = {
.slaves = hpb_dmae_slaves,
.num_slaves = ARRAY_SIZE(hpb_dmae_slaves),
.channels = hpb_dmae_channels,
.num_channels = ARRAY_SIZE(hpb_dmae_channels),
.ts_shift = {
[XMIT_SZ_8BIT] = 0,
[XMIT_SZ_16BIT] = 1,
[XMIT_SZ_32BIT] = 2,
},
.num_hw_channels = 39,
};
static struct resource hpb_dmae_resources[] __initdata = {
/* Channel registers */
DEFINE_RES_MEM(0xffc08000, 0x1000),
/* Common registers */
DEFINE_RES_MEM(0xffc09000, 0x170),
/* Asynchronous reset registers */
DEFINE_RES_MEM(0xffc00300, 4),
/* Asynchronous mode registers */
DEFINE_RES_MEM(0xffc00400, 4),
/* IRQ for DMA channels */
DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
};
static void __init r8a7778_register_hpb_dmae(void)
{
platform_device_register_resndata(NULL, "hpb-dma-engine",
-1, hpb_dmae_resources,
ARRAY_SIZE(hpb_dmae_resources),
&dma_platform_data,
sizeof(dma_platform_data));
}
void __init r8a7778_add_standard_devices(void)
{
r8a7778_add_dt_devices();
r8a7778_register_tmu(0);
r8a7778_register_scif(0);
r8a7778_register_scif(1);
r8a7778_register_scif(2);
r8a7778_register_scif(3);
r8a7778_register_scif(4);
r8a7778_register_scif(5);
r8a7778_register_i2c(0);
r8a7778_register_i2c(1);
r8a7778_register_i2c(2);
r8a7778_register_i2c(3);
r8a7778_register_hspi(0);
r8a7778_register_hspi(1);
r8a7778_register_hspi(2);
r8a7778_register_hpb_dmae();
}
void __init r8a7778_init_late(void)
{
shmobile_init_late();
platform_device_register_full(&ehci_info);
platform_device_register_full(&ohci_info);
}
static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
.sense_bitfield_width = 2,
};
static struct resource irqpin_resources[] __initdata = {
DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */
DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */
DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */
DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
};
void __init r8a7778_init_irq_extpin_dt(int irlm)
{
void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
unsigned long tmp;
if (!icr0) {
pr_warn("r8a7778: unable to setup external irq pin mode\n");
return;
}
tmp = ioread32(icr0);
if (irlm)
tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
else
tmp &= ~(1 << 23); /* IRL mode - not supported */
tmp |= (1 << 21); /* LVLMODE = 1 */
iowrite32(tmp, icr0);
iounmap(icr0);
}
void __init r8a7778_init_irq_extpin(int irlm)
{
r8a7778_init_irq_extpin_dt(irlm);
if (irlm)
platform_device_register_resndata(
NULL, "renesas_intc_irqpin", -1,
irqpin_resources, ARRAY_SIZE(irqpin_resources),
&irqpin_platform_data, sizeof(irqpin_platform_data));
}
#ifdef CONFIG_USE_OF
#define INT2SMSKCR0 0x82288 /* 0xfe782288 */
#define INT2SMSKCR1 0x8228c /* 0xfe78228c */
#define INT2NTSR0 0x00018 /* 0xfe700018 */
#define INT2NTSR1 0x0002c /* 0xfe70002c */
void __init r8a7778_init_irq_dt(void)
static void __init r8a7778_init_irq_dt(void)
{
void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
#endif
BUG_ON(!base);
#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
gic_init(0, 29, gic_dist_base, gic_cpu_base);
#else
irqchip_init();
#endif
/* route all interrupts to ARM */
__raw_writel(0x73ffffff, base + INT2NTSR0);
__raw_writel(0xffffffff, base + INT2NTSR1);
@ -624,10 +71,6 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
.init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_late = shmobile_init_late,
#ifdef CONFIG_COMMON_CLK
.init_time = r8a7778_timer_init,
#endif
.dt_compat = r8a7778_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */

29
arch/arm/mach-shmobile/sh-gpio.h
Просмотреть файл

@ -1,29 +0,0 @@
/*
* Generic GPIO API and pinmux table support
*
* Copyright (c) 2008 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/io.h>
/*
* FIXME !!
*
* current gpio frame work doesn't have
* the method to control only pull up/down/free.
* this function should be replaced by correct gpio function
*/
static inline void __init gpio_direction_none(void __iomem * addr)
{
__raw_writeb(0x00, addr);
}
#endif /* __ASM_ARCH_GPIO_H */

21
arch/arm/mach-shmobile/timer.c
Просмотреть файл

@ -77,24 +77,3 @@ void __init shmobile_init_delay(void)
shmobile_setup_delay_hz(max_freq, 2, 4);
}
}
static void __init shmobile_late_time_init(void)
{
/*
* Make sure all compiled-in early timers register themselves.
*
* Run probe() for two "earlytimer" devices, these will be the
* clockevents and clocksource devices respectively. In the event
* that only a clockevents device is available, we -ENODEV on the
* clocksource and the jiffies clocksource is used transparently
* instead. No error handling is necessary here.
*/
early_platform_driver_register_all("earlytimer");
early_platform_driver_probe("earlytimer", 2, 0);
}
void __init shmobile_earlytimer_init(void)
{
late_time_init = shmobile_late_time_init;
}

2
arch/arm/mach-spear/hotplug.c
Просмотреть файл

@ -80,7 +80,7 @@ static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
*
* Called with IRQs disabled
*/
void __ref spear13xx_cpu_die(unsigned int cpu)
void spear13xx_cpu_die(unsigned int cpu)
{
int spurious = 0;

2
arch/arm/mach-tegra/hotplug.c
Просмотреть файл

@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu)
*
* Called with IRQs disabled
*/
void __ref tegra_cpu_die(unsigned int cpu)
void tegra_cpu_die(unsigned int cpu)
{
if (!tegra_hotplug_shutdown) {
WARN(1, "hotplug is not yet initialized\n");

2
arch/arm/mach-ux500/hotplug.c
Просмотреть файл

@ -21,7 +21,7 @@
*
* Called with IRQs disabled
*/
void __ref ux500_cpu_die(unsigned int cpu)
void ux500_cpu_die(unsigned int cpu)
{
/* directly enter low power state, skipping secure registers */
for (;;) {

2
arch/arm/mach-vexpress/hotplug.c
Просмотреть файл

@ -85,7 +85,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
*
* Called with IRQs disabled
*/
void __ref vexpress_cpu_die(unsigned int cpu)
void vexpress_cpu_die(unsigned int cpu)
{
int spurious = 0;

8
drivers/clocksource/Kconfig
Просмотреть файл

@ -123,6 +123,14 @@ config CLKSRC_PISTACHIO
bool
select CLKSRC_OF
config CLKSRC_TI_32K
bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST
depends on GENERIC_SCHED_CLOCK
select CLKSRC_OF if OF
help
This option enables support for Texas Instruments 32.768 Hz clocksource
available on many OMAP-like platforms.
config CLKSRC_STM32
bool "Clocksource for STM32 SoCs" if !ARCH_STM32
depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)

1
drivers/clocksource/Makefile
Просмотреть файл

@ -45,6 +45,7 @@ obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o

126
drivers/clocksource/timer-ti-32k.c Normal file
Просмотреть файл

@ -0,0 +1,126 @@
/**
* timer-ti-32k.c - OMAP2 32k Timer Support
*
* Copyright (C) 2009 Nokia Corporation
*
* Update to use new clocksource/clockevent layers
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 MontaVista Software, Inc.
*
* Original driver:
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
* Juha Yrjölä <juha.yrjola@nokia.com>
* OMAP Dual-mode timer framework support by Timo Teras
*
* Some parts based off of TI's 24xx code:
*
* Copyright (C) 2004-2009 Texas Instruments, Inc.
*
* Roughly modelled after the OMAP1 MPU timer code.
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/time.h>
#include <linux/sched_clock.h>
#include <linux/clocksource.h>
#include <linux/of.h>
#include <linux/of_address.h>
/*
* 32KHz clocksource ... always available, on pretty most chips except
* OMAP 730 and 1510. Other timers could be used as clocksources, with
* higher resolution in free-running counter modes (e.g. 12 MHz xtal),
* but systems won't necessarily want to spend resources that way.
*/
#define OMAP2_32KSYNCNT_REV_OFF 0x0
#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10
#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30
struct ti_32k {
void __iomem *base;
void __iomem *counter;
struct clocksource cs;
};
static inline struct ti_32k *to_ti_32k(struct clocksource *cs)
{
return container_of(cs, struct ti_32k, cs);
}
static cycle_t ti_32k_read_cycles(struct clocksource *cs)
{
struct ti_32k *ti = to_ti_32k(cs);
return (cycle_t)readl_relaxed(ti->counter);
}
static struct ti_32k ti_32k_timer = {
.cs = {
.name = "32k_counter",
.rating = 250,
.read = ti_32k_read_cycles,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
CLOCK_SOURCE_SUSPEND_NONSTOP,
},
};
static u64 notrace omap_32k_read_sched_clock(void)
{
return ti_32k_read_cycles(&ti_32k_timer.cs);
}
static void __init ti_32k_timer_init(struct device_node *np)
{
int ret;
ti_32k_timer.base = of_iomap(np, 0);
if (!ti_32k_timer.base) {
pr_err("Can't ioremap 32k timer base\n");
return;
}
ti_32k_timer.counter = ti_32k_timer.base;
/*
* 32k sync Counter IP register offsets vary between the highlander
* version and the legacy ones.
*
* The 'SCHEME' bits(30-31) of the revision register is used to identify
* the version.
*/
if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) &
OMAP2_32KSYNCNT_REV_SCHEME)
ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH;
else
ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
if (ret) {
pr_err("32k_counter: can't register clocksource\n");
return;
}
sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
}
CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
ti_32k_timer_init);

1
include/linux/spi/pxa2xx_spi.h
Просмотреть файл

@ -23,7 +23,6 @@ struct dma_chan;
/* device.platform_data for SSP controller devices */
struct pxa2xx_spi_master {
u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;