[ARM] Move AMBA include files to include/linux/amba/

Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use.  Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/common/amba.c

@@ -12,10 +12,10 @@
 #include <linux/device.h>
 #include <linux/string.h>
 #include <linux/slab.h>
+#include <linux/amba/bus.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware/amba.h>
 #include <asm/sizes.h>
 
 #define to_amba_device(d)	container_of(d, struct amba_device, dev)

arch/arm/mach-aaec2000/core.c

@@ -20,11 +20,11 @@
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/signal.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
 
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>

arch/arm/mach-aaec2000/core.h

@@ -9,7 +9,7 @@
  *
  */
 
-#include <asm/hardware/amba_clcd.h>
+#include <linux/amba/clcd.h>
 
 struct sys_timer;
 

arch/arm/mach-integrator/core.c

@@ -15,11 +15,11 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/hardware/amba.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/arch/cm.h>
 #include <asm/system.h>

arch/arm/mach-integrator/impd1.c

@@ -18,11 +18,11 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/mm.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
 
 #include <asm/io.h>
 #include <asm/hardware/icst525.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
 #include <asm/arch/lm.h>
 #include <asm/arch/impd1.h>
 #include <asm/sizes.h>

arch/arm/mach-integrator/integrator_ap.c

@@ -25,6 +25,8 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -32,8 +34,6 @@
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
 
 #include <asm/arch/lm.h>
 

arch/arm/mach-integrator/integrator_cp.c

@@ -16,15 +16,15 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
+#include <linux/amba/clcd.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
-#include <asm/hardware/amba_clcd.h>
 #include <asm/hardware/icst525.h>
 
 #include <asm/arch/cm.h>

arch/arm/mach-integrator/time.c

@@ -14,8 +14,8 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/amba/bus.h>
 
-#include <asm/hardware/amba.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>

arch/arm/mach-realview/core.c

@@ -24,14 +24,14 @@
 #include <linux/dma-mapping.h>
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 

arch/arm/mach-realview/core.h

@@ -22,7 +22,8 @@
 #ifndef __ASM_ARCH_REALVIEW_H
 #define __ASM_ARCH_REALVIEW_H
 
-#include <asm/hardware/amba.h>
+#include <linux/amba/bus.h>
+
 #include <asm/leds.h>
 #include <asm/io.h>
 

arch/arm/mach-realview/realview_eb.c

@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -30,7 +31,6 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/amba.h>
 #include <asm/hardware/icst307.h>
 
 #include <asm/mach/arch.h>

arch/arm/mach-versatile/core.c

@@ -25,14 +25,14 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
 
 #include <asm/system.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_clcd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 

arch/arm/mach-versatile/core.h

@@ -22,7 +22,7 @@
 #ifndef __ASM_ARCH_VERSATILE_H
 #define __ASM_ARCH_VERSATILE_H
 
-#include <asm/hardware/amba.h>
+#include <linux/amba/bus.h>
 
 extern void __init versatile_init(void);
 extern void __init versatile_init_irq(void);

arch/arm/mach-versatile/versatile_ab.c

@@ -23,12 +23,12 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
 
 #include <asm/mach/arch.h>
 

arch/arm/mach-versatile/versatile_pb.c

@@ -23,12 +23,12 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/amba.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/mmc.h>

drivers/input/serio/ambakmi.c

@@ -19,11 +19,11 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/kmi.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_kmi.h>
 #include <asm/hardware/clock.h>
 
 #define KMI_BASE	(kmi->base)

drivers/mmc/mmci.c

@@ -19,12 +19,12 @@
 #include <linux/highmem.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
+#include <linux/amba/bus.h>
 
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/scatterlist.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
 #include <asm/hardware/clock.h>
 #include <asm/mach/mmc.h>
 

drivers/serial/amba-pl010.c

@@ -47,12 +47,12 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware.h>
-#include <asm/hardware/amba.h>
-#include <asm/hardware/amba_serial.h>
 
 #define UART_NR		2
 

drivers/serial/amba-pl011.c

@@ -47,12 +47,12 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
 #include <asm/hardware/clock.h>
-#include <asm/hardware/amba_serial.h>
 
 #define UART_NR			14
 

drivers/video/amba-clcd.c

@@ -21,13 +21,12 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/list.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
 
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
 #include <asm/hardware/clock.h>
 
-#include <asm/hardware/amba_clcd.h>
-
 #define to_clcd(info)	container_of(info, struct clcd_fb, fb)
 
 /* This is limited to 16 characters when displayed by X startup */

include/asm-arm/arch-integrator/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-#include <asm/hardware/amba_serial.h>
+#include <linux/amba/serial.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0

include/asm-arm/arch-realview/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-#include <asm/hardware/amba_serial.h>
+#include <linux/amba/serial.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0

include/asm-arm/arch-versatile/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-#include <asm/hardware/amba_serial.h>
+#include <linux/amba/serial.h>
 
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0

sound/arm/aaci.c

@@ -17,11 +17,11 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
+#include <linux/amba/bus.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
-#include <asm/hardware/amba.h>
 
 #include <sound/driver.h>
 #include <sound/core.h>