ALSA: hda/ca0132 - Create mmio gpio function to make code clearer

This patch adds a new function, ca0132_mmio_gpio_set, to clear up what
is going on with writes to mmio region 0x320.

Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Connor McAdams 2018-08-08 13:34:12 -04:00 коммит произвёл Takashi Iwai
Родитель d2f884612c
Коммит a62e473947
1 изменённых файлов: 38 добавлений и 24 удалений

Просмотреть файл

@ -3072,6 +3072,24 @@ static bool dspload_wait_loaded(struct hda_codec *codec)
* Setup GPIO for the other variants of Core3D.
*/
/*
* For cards with PCI-E region2 (Sound Blaster Z/ZxR, Recon3D, and AE-5)
* the mmio address 0x320 is used to set GPIO pins. The format for the data
* The first eight bits are just the number of the pin. So far, I've only seen
* this number go to 7.
*/
static void ca0132_mmio_gpio_set(struct hda_codec *codec, unsigned int gpio_pin,
bool enable)
{
struct ca0132_spec *spec = codec->spec;
unsigned short gpio_data;
gpio_data = gpio_pin & 0xF;
gpio_data |= ((enable << 8) & 0x100);
writew(gpio_data, spec->mem_base + 0x320);
}
/*
* Sets up the GPIO pins so that they are discoverable. If this isn't done,
* the card shows as having no GPIO pins.
@ -3947,9 +3965,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec)
/*speaker out config*/
switch (spec->quirk) {
case QUIRK_SBZ:
writew(0x0007, spec->mem_base + 0x320);
writew(0x0104, spec->mem_base + 0x320);
writew(0x0101, spec->mem_base + 0x320);
ca0132_mmio_gpio_set(codec, 7, false);
ca0132_mmio_gpio_set(codec, 4, true);
ca0132_mmio_gpio_set(codec, 1, true);
chipio_set_control_param(codec, 0x0D, 0x18);
break;
case QUIRK_R3DI:
@ -3983,9 +4001,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec)
/* Headphone out config*/
switch (spec->quirk) {
case QUIRK_SBZ:
writew(0x0107, spec->mem_base + 0x320);
writew(0x0104, spec->mem_base + 0x320);
writew(0x0001, spec->mem_base + 0x320);
ca0132_mmio_gpio_set(codec, 7, true);
ca0132_mmio_gpio_set(codec, 4, true);
ca0132_mmio_gpio_set(codec, 1, false);
chipio_set_control_param(codec, 0x0D, 0x12);
break;
case QUIRK_R3DI:
@ -4025,9 +4043,9 @@ static int ca0132_alt_select_out(struct hda_codec *codec)
/* Surround out config*/
switch (spec->quirk) {
case QUIRK_SBZ:
writew(0x0007, spec->mem_base + 0x320);
writew(0x0104, spec->mem_base + 0x320);
writew(0x0101, spec->mem_base + 0x320);
ca0132_mmio_gpio_set(codec, 7, false);
ca0132_mmio_gpio_set(codec, 4, true);
ca0132_mmio_gpio_set(codec, 1, true);
chipio_set_control_param(codec, 0x0D, 0x18);
break;
case QUIRK_R3DI:
@ -4291,7 +4309,7 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
case REAR_MIC:
switch (spec->quirk) {
case QUIRK_SBZ:
writew(0x0000, spec->mem_base + 0x320);
ca0132_mmio_gpio_set(codec, 0, false);
tmp = FLOAT_THREE;
break;
case QUIRK_R3DI:
@ -4323,7 +4341,7 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
ca0132_mic_boost_set(codec, 0);
switch (spec->quirk) {
case QUIRK_SBZ:
writew(0x0000, spec->mem_base + 0x320);
ca0132_mmio_gpio_set(codec, 0, false);
break;
case QUIRK_R3DI:
r3di_gpio_mic_set(codec, R3DI_REAR_MIC);
@ -4349,8 +4367,8 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
case FRONT_MIC:
switch (spec->quirk) {
case QUIRK_SBZ:
writew(0x0100, spec->mem_base + 0x320);
writew(0x0005, spec->mem_base + 0x320);
ca0132_mmio_gpio_set(codec, 0, true);
ca0132_mmio_gpio_set(codec, 5, false);
tmp = FLOAT_THREE;
break;
case QUIRK_R3DI:
@ -6890,16 +6908,12 @@ static void sbz_region2_exit(struct hda_codec *codec)
writeb(0x0, spec->mem_base + 0x100);
for (i = 0; i < 8; i++)
writeb(0xb3, spec->mem_base + 0x304);
/*
* I believe these are GPIO, with the right most hex digit being the
* gpio pin, and the second digit being on or off. We see this more in
* the input/output select functions.
*/
writew(0x0000, spec->mem_base + 0x320);
writew(0x0001, spec->mem_base + 0x320);
writew(0x0104, spec->mem_base + 0x320);
writew(0x0005, spec->mem_base + 0x320);
writew(0x0007, spec->mem_base + 0x320);
ca0132_mmio_gpio_set(codec, 0, false);
ca0132_mmio_gpio_set(codec, 1, false);
ca0132_mmio_gpio_set(codec, 4, true);
ca0132_mmio_gpio_set(codec, 5, false);
ca0132_mmio_gpio_set(codec, 7, false);
}
static void sbz_set_pin_ctl_default(struct hda_codec *codec)
@ -7236,7 +7250,7 @@ static int ca0132_init(struct hda_codec *codec)
ca0132_refresh_widget_caps(codec);
if (spec->quirk == QUIRK_SBZ)
writew(0x0107, spec->mem_base + 0x320);
ca0132_mmio_gpio_set(codec, 7, true);
switch (spec->quirk) {
case QUIRK_R3DI: