[MIPS] Au1xxx: board specific irq code cleanup

Convert sizeof/sizeof use to use of ARRAY_SIZE macro, and annotate
irqmap structures as __initdata.

Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/au1000/common/au1xxx_irqmap.c

@@ -55,7 +55,7 @@
  * Careful if you change match 2 request!
  * The interrupt handler is called directly from the low level dispatch code.
  */
-au1xxx_irq_map_t au1xxx_ic0_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_ic0_map[] = {
 
 #if defined(CONFIG_SOC_AU1000)
 	{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
@@ -220,5 +220,5 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
 
 };
 
-int au1xxx_ic0_nr_irqs = sizeof(au1xxx_ic0_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
 

arch/mips/au1000/csb250/irqmap.c

@@ -47,7 +47,7 @@
 #include <asm/system.h>
 #include <asm/au1000.h>
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
 
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
@@ -57,4 +57,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
 	{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/db1x00/irqmap.c

@@ -80,7 +80,7 @@ char irq_tab_alchemy[][5] __initdata = {
 #endif
 
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
 
 #ifndef CONFIG_MIPS_MIRAGE
 #ifdef CONFIG_MIPS_DB1550
@@ -101,4 +101,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
 
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/hydrogen3/irqmap.c

@@ -47,10 +47,10 @@
 #include <asm/system.h>
 #include <asm/au1000.h>
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
 
 	/* { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, */
 	{ AU1000_GPIO_21, INTC_INT_LOW_LEVEL, 0 },
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/mtx-1/irqmap.c

@@ -58,7 +58,7 @@ char irq_tab_alchemy[][5] __initdata = {
  [7] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 07 - AdapterD-Slot1 (bottom) */
 };
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
        { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
        { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
@@ -66,4 +66,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
        { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/pb1000/irqmap.c

@@ -47,8 +47,8 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
 	{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/pb1100/irqmap.c

@@ -47,11 +47,11 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
 	{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
 	{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
 	{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
 	{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/pb1200/irqmap.c

@@ -55,11 +55,11 @@
 #define PB1200_INT_END DB1200_INT_END
 #endif
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
 	{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
 
 /*
  *	Support for External interrupts on the PbAu1200 Development platform.

arch/mips/au1000/pb1500/irqmap.c

@@ -52,7 +52,7 @@ char irq_tab_alchemy[][5] __initdata = {
  [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
 };
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
 	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
@@ -60,4 +60,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
 	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/pb1550/irqmap.c

@@ -52,9 +52,9 @@ char irq_tab_alchemy[][5] __initdata = {
  [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
 };
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
 	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
 	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/xxs1500/irqmap.c

@@ -47,7 +47,7 @@
 #include <asm/system.h>
 #include <asm/au1000.h>
 
-au1xxx_irq_map_t au1xxx_irq_map[] = {
+au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
 	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
@@ -63,4 +63,4 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
 	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
 };
 
-int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);