microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

tty/serial: at91: fix I/O accesses on RHR and THR for AVR32 

This patch fixes I/O accesses on the Receiver Holding Register and on the
Transmitter Holding Register. Indeed AVR32 can only perform 32bit I/O
accesses on registers: using 8bit I/O accesses would read or write garbage
data.

Fixes: commit b5199d4681 ("tty/serial: at91: add support to FIFOs")
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Cyrille Pitchen 2015-07-30 16:33:38 +02:00 коммит произвёл Greg Kroah-Hartman
Родитель b737eeb09e
Коммит a649943522
1 изменённых файлов: 27 добавлений и 10 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

37
drivers/tty/serial/atmel_serial.c
Просмотреть файл

@ -204,16 +204,33 @@ static inline void atmel_uart_writel(struct uart_port *port, u32 reg, u32 value)
__raw_writel(value, port->membase + reg);
}
static inline u8 atmel_uart_readb(struct uart_port *port, u32 reg)
#ifdef CONFIG_AVR32
/* AVR32 cannot handle 8 or 16bit I/O accesses but only 32bit I/O accesses */
static inline u8 atmel_uart_read_char(struct uart_port *port)
{
return __raw_readb(port->membase + reg);
return __raw_readl(port->membase + ATMEL_US_RHR);
}
static inline void atmel_uart_writeb(struct uart_port *port, u32 reg, u8 value)
static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
{
__raw_writeb(value, port->membase + reg);
__raw_writel(value, port->membase + ATMEL_US_THR);
}
#else
static inline u8 atmel_uart_read_char(struct uart_port *port)
{
return __raw_readb(port->membase + ATMEL_US_RHR);
}
static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
{
__raw_writeb(value, port->membase + ATMEL_US_THR);
}
#endif
#ifdef CONFIG_SERIAL_ATMEL_PDC
static bool atmel_use_pdc_rx(struct uart_port *port)
{
@ -658,7 +675,7 @@ static void atmel_rx_chars(struct uart_port *port)
status = atmel_uart_readl(port, ATMEL_US_CSR);
while (status & ATMEL_US_RXRDY) {
ch = atmel_uart_readb(port, ATMEL_US_RHR);
ch = atmel_uart_read_char(port);
/*
* note that the error handling code is
@ -709,7 +726,7 @@ static void atmel_tx_chars(struct uart_port *port)
if (port->x_char &&
(atmel_uart_readl(port, ATMEL_US_CSR) & atmel_port->tx_done_mask)) {
atmel_uart_writeb(port, ATMEL_US_THR, port->x_char);
atmel_uart_write_char(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
}
@ -718,7 +735,7 @@ static void atmel_tx_chars(struct uart_port *port)
while (atmel_uart_readl(port, ATMEL_US_CSR) &
atmel_port->tx_done_mask) {
atmel_uart_writeb(port, ATMEL_US_THR, xmit->buf[xmit->tail]);
atmel_uart_write_char(port, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
@ -2294,7 +2311,7 @@ static int atmel_poll_get_char(struct uart_port *port)
while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_RXRDY))
cpu_relax();
return atmel_uart_readb(port, ATMEL_US_RHR);
return atmel_uart_read_char(port);
}
static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
@ -2302,7 +2319,7 @@ static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY))
cpu_relax();
atmel_uart_writeb(port, ATMEL_US_THR, ch);
atmel_uart_write_char(port, ch);
}
#endif
@ -2409,7 +2426,7 @@ static void atmel_console_putchar(struct uart_port *port, int ch)
{
while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY))
cpu_relax();
atmel_uart_writeb(port, ATMEL_US_THR, ch);
atmel_uart_write_char(port, ch);
}
/*