regulator: enable max8649 regulator driver
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
This commit is contained in:
Haojian Zhuang
Liam Girdwood
Родитель
79ac9bc320
Коммит
a71b797fdc
|
|
@ -69,6 +69,13 @@ config REGULATOR_MAX1586
|
|||
regulator via I2C bus. The provided regulator is suitable
|
||||
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
|
||||
|
||||
config REGULATOR_MAX8649
|
||||
tristate "Maxim 8649 voltage regulator"
|
||||
depends on I2C
|
||||
help
|
||||
This driver controls a Maxim 8649 voltage output regulator via
|
||||
I2C bus.
|
||||
|
||||
config REGULATOR_MAX8660
|
||||
tristate "Maxim 8660/8661 voltage regulator"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
|
|||
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
|
||||
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
|
||||
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
|
||||
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,408 @@
|
|||
/*
|
||||
* Regulators driver for Maxim max8649
|
||||
*
|
||||
* Copyright (C) 2009-2010 Marvell International Ltd.
|
||||
* Haojian Zhuang <haojian.zhuang@marvell.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/max8649.h>
|
||||
|
||||
#define MAX8649_DCDC_VMIN 750000 /* uV */
|
||||
#define MAX8649_DCDC_VMAX 1380000 /* uV */
|
||||
#define MAX8649_DCDC_STEP 10000 /* uV */
|
||||
#define MAX8649_VOL_MASK 0x3f
|
||||
|
||||
/* Registers */
|
||||
#define MAX8649_MODE0 0x00
|
||||
#define MAX8649_MODE1 0x01
|
||||
#define MAX8649_MODE2 0x02
|
||||
#define MAX8649_MODE3 0x03
|
||||
#define MAX8649_CONTROL 0x04
|
||||
#define MAX8649_SYNC 0x05
|
||||
#define MAX8649_RAMP 0x06
|
||||
#define MAX8649_CHIP_ID1 0x08
|
||||
#define MAX8649_CHIP_ID2 0x09
|
||||
|
||||
/* Bits */
|
||||
#define MAX8649_EN_PD (1 << 7)
|
||||
#define MAX8649_VID0_PD (1 << 6)
|
||||
#define MAX8649_VID1_PD (1 << 5)
|
||||
#define MAX8649_VID_MASK (3 << 5)
|
||||
|
||||
#define MAX8649_FORCE_PWM (1 << 7)
|
||||
#define MAX8649_SYNC_EXTCLK (1 << 6)
|
||||
|
||||
#define MAX8649_EXT_MASK (3 << 6)
|
||||
|
||||
#define MAX8649_RAMP_MASK (7 << 5)
|
||||
#define MAX8649_RAMP_DOWN (1 << 1)
|
||||
|
||||
struct max8649_regulator_info {
|
||||
struct regulator_dev *regulator;
|
||||
struct i2c_client *i2c;
|
||||
struct device *dev;
|
||||
struct mutex io_lock;
|
||||
|
||||
int vol_reg;
|
||||
unsigned mode:2; /* bit[1:0] = VID1, VID0 */
|
||||
unsigned extclk_freq:2;
|
||||
unsigned extclk:1;
|
||||
unsigned ramp_timing:3;
|
||||
unsigned ramp_down:1;
|
||||
};
|
||||
|
||||
/* I2C operations */
|
||||
|
||||
static inline int max8649_read_device(struct i2c_client *i2c,
|
||||
int reg, int bytes, void *dest)
|
||||
{
|
||||
unsigned char data;
|
||||
int ret;
|
||||
|
||||
data = (unsigned char)reg;
|
||||
ret = i2c_master_send(i2c, &data, 1);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = i2c_master_recv(i2c, dest, bytes);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline int max8649_write_device(struct i2c_client *i2c,
|
||||
int reg, int bytes, void *src)
|
||||
{
|
||||
unsigned char buf[bytes + 1];
|
||||
int ret;
|
||||
|
||||
buf[0] = (unsigned char)reg;
|
||||
memcpy(&buf[1], src, bytes);
|
||||
|
||||
ret = i2c_master_send(i2c, buf, bytes + 1);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max8649_reg_read(struct i2c_client *i2c, int reg)
|
||||
{
|
||||
struct max8649_regulator_info *info = i2c_get_clientdata(i2c);
|
||||
unsigned char data;
|
||||
int ret;
|
||||
|
||||
mutex_lock(&info->io_lock);
|
||||
ret = max8649_read_device(i2c, reg, 1, &data);
|
||||
mutex_unlock(&info->io_lock);
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
return (int)data;
|
||||
}
|
||||
|
||||
static int max8649_set_bits(struct i2c_client *i2c, int reg,
|
||||
unsigned char mask, unsigned char data)
|
||||
{
|
||||
struct max8649_regulator_info *info = i2c_get_clientdata(i2c);
|
||||
unsigned char value;
|
||||
int ret;
|
||||
|
||||
mutex_lock(&info->io_lock);
|
||||
ret = max8649_read_device(i2c, reg, 1, &value);
|
||||
if (ret < 0)
|
||||
goto out;
|
||||
value &= ~mask;
|
||||
value |= data;
|
||||
ret = max8649_write_device(i2c, reg, 1, &value);
|
||||
out:
|
||||
mutex_unlock(&info->io_lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static inline int check_range(int min_uV, int max_uV)
|
||||
{
|
||||
if ((min_uV < MAX8649_DCDC_VMIN) || (max_uV > MAX8649_DCDC_VMAX)
|
||||
|| (min_uV > max_uV))
|
||||
return -EINVAL;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max8649_list_voltage(struct regulator_dev *rdev, unsigned index)
|
||||
{
|
||||
return (MAX8649_DCDC_VMIN + index * MAX8649_DCDC_STEP);
|
||||
}
|
||||
|
||||
static int max8649_get_voltage(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
unsigned char data;
|
||||
int ret;
|
||||
|
||||
ret = max8649_reg_read(info->i2c, info->vol_reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
data = (unsigned char)ret & MAX8649_VOL_MASK;
|
||||
return max8649_list_voltage(rdev, data);
|
||||
}
|
||||
|
||||
static int max8649_set_voltage(struct regulator_dev *rdev,
|
||||
int min_uV, int max_uV)
|
||||
{
|
||||
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
unsigned char data, mask;
|
||||
|
||||
if (check_range(min_uV, max_uV)) {
|
||||
dev_err(info->dev, "invalid voltage range (%d, %d) uV\n",
|
||||
min_uV, max_uV);
|
||||
return -EINVAL;
|
||||
}
|
||||
data = (min_uV - MAX8649_DCDC_VMIN + MAX8649_DCDC_STEP - 1)
|
||||
/ MAX8649_DCDC_STEP;
|
||||
mask = MAX8649_VOL_MASK;
|
||||
|
||||
return max8649_set_bits(info->i2c, info->vol_reg, mask, data);
|
||||
}
|
||||
|
||||
/* EN_PD means pulldown on EN input */
|
||||
static int max8649_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
return max8649_set_bits(info->i2c, MAX8649_CONTROL, MAX8649_EN_PD, 0);
|
||||
}
|
||||
|
||||
/*
|
||||
* Applied internal pulldown resistor on EN input pin.
|
||||
* If pulldown EN pin outside, it would be better.
|
||||
*/
|
||||
static int max8649_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
return max8649_set_bits(info->i2c, MAX8649_CONTROL, MAX8649_EN_PD,
|
||||
MAX8649_EN_PD);
|
||||
}
|
||||
|
||||
static int max8649_is_enabled(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
int ret;
|
||||
|
||||
ret = max8649_reg_read(info->i2c, MAX8649_CONTROL);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
return !((unsigned char)ret & MAX8649_EN_PD);
|
||||
}
|
||||
|
||||
static int max8649_enable_time(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
int voltage, rate, ret;
|
||||
|
||||
/* get voltage */
|
||||
ret = max8649_reg_read(info->i2c, info->vol_reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret &= MAX8649_VOL_MASK;
|
||||
voltage = max8649_list_voltage(rdev, (unsigned char)ret); /* uV */
|
||||
|
||||
/* get rate */
|
||||
ret = max8649_reg_read(info->i2c, MAX8649_RAMP);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
ret = (ret & MAX8649_RAMP_MASK) >> 5;
|
||||
rate = (32 * 1000) >> ret; /* uV/uS */
|
||||
|
||||
return (voltage / rate);
|
||||
}
|
||||
|
||||
static int max8649_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_FAST:
|
||||
max8649_set_bits(info->i2c, info->vol_reg, MAX8649_FORCE_PWM,
|
||||
MAX8649_FORCE_PWM);
|
||||
break;
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
max8649_set_bits(info->i2c, info->vol_reg,
|
||||
MAX8649_FORCE_PWM, 0);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned int max8649_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
int ret;
|
||||
|
||||
ret = max8649_reg_read(info->i2c, info->vol_reg);
|
||||
if (ret & MAX8649_FORCE_PWM)
|
||||
return REGULATOR_MODE_FAST;
|
||||
return REGULATOR_MODE_NORMAL;
|
||||
}
|
||||
|
||||
static struct regulator_ops max8649_dcdc_ops = {
|
||||
.set_voltage = max8649_set_voltage,
|
||||
.get_voltage = max8649_get_voltage,
|
||||
.list_voltage = max8649_list_voltage,
|
||||
.enable = max8649_enable,
|
||||
.disable = max8649_disable,
|
||||
.is_enabled = max8649_is_enabled,
|
||||
.enable_time = max8649_enable_time,
|
||||
.set_mode = max8649_set_mode,
|
||||
.get_mode = max8649_get_mode,
|
||||
|
||||
};
|
||||
|
||||
static struct regulator_desc dcdc_desc = {
|
||||
.name = "max8649",
|
||||
.ops = &max8649_dcdc_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = 1 << 6,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int __devinit max8649_regulator_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct max8649_platform_data *pdata = client->dev.platform_data;
|
||||
struct max8649_regulator_info *info = NULL;
|
||||
unsigned char data;
|
||||
int ret;
|
||||
|
||||
info = kzalloc(sizeof(struct max8649_regulator_info), GFP_KERNEL);
|
||||
if (!info) {
|
||||
dev_err(&client->dev, "No enough memory\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
info->i2c = client;
|
||||
info->dev = &client->dev;
|
||||
mutex_init(&info->io_lock);
|
||||
i2c_set_clientdata(client, info);
|
||||
|
||||
info->mode = pdata->mode;
|
||||
switch (info->mode) {
|
||||
case 0:
|
||||
info->vol_reg = MAX8649_MODE0;
|
||||
break;
|
||||
case 1:
|
||||
info->vol_reg = MAX8649_MODE1;
|
||||
break;
|
||||
case 2:
|
||||
info->vol_reg = MAX8649_MODE2;
|
||||
break;
|
||||
case 3:
|
||||
info->vol_reg = MAX8649_MODE3;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
ret = max8649_reg_read(info->i2c, MAX8649_CHIP_ID1);
|
||||
if (ret < 0) {
|
||||
dev_err(info->dev, "Failed to detect ID of MAX8649:%d\n",
|
||||
ret);
|
||||
goto out;
|
||||
}
|
||||
dev_info(info->dev, "Detected MAX8649 (ID:%x)\n", ret);
|
||||
|
||||
/* enable VID0 & VID1 */
|
||||
max8649_set_bits(info->i2c, MAX8649_CONTROL, MAX8649_VID_MASK, 0);
|
||||
|
||||
/* enable/disable external clock synchronization */
|
||||
info->extclk = pdata->extclk;
|
||||
data = (info->extclk) ? MAX8649_SYNC_EXTCLK : 0;
|
||||
max8649_set_bits(info->i2c, info->vol_reg, MAX8649_SYNC_EXTCLK, data);
|
||||
if (info->extclk) {
|
||||
/* set external clock frequency */
|
||||
info->extclk_freq = pdata->extclk_freq;
|
||||
max8649_set_bits(info->i2c, MAX8649_SYNC, MAX8649_EXT_MASK,
|
||||
info->extclk_freq);
|
||||
}
|
||||
|
||||
if (pdata->ramp_timing) {
|
||||
info->ramp_timing = pdata->ramp_timing;
|
||||
max8649_set_bits(info->i2c, MAX8649_RAMP, MAX8649_RAMP_MASK,
|
||||
info->ramp_timing << 5);
|
||||
}
|
||||
|
||||
info->ramp_down = pdata->ramp_down;
|
||||
if (info->ramp_down) {
|
||||
max8649_set_bits(info->i2c, MAX8649_RAMP, MAX8649_RAMP_DOWN,
|
||||
MAX8649_RAMP_DOWN);
|
||||
}
|
||||
|
||||
info->regulator = regulator_register(&dcdc_desc, &client->dev,
|
||||
pdata->regulator, info);
|
||||
if (IS_ERR(info->regulator)) {
|
||||
dev_err(info->dev, "failed to register regulator %s\n",
|
||||
dcdc_desc.name);
|
||||
ret = PTR_ERR(info->regulator);
|
||||
goto out;
|
||||
}
|
||||
|
||||
dev_info(info->dev, "Max8649 regulator device is detected.\n");
|
||||
return 0;
|
||||
out:
|
||||
kfree(info);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit max8649_regulator_remove(struct i2c_client *client)
|
||||
{
|
||||
struct max8649_regulator_info *info = i2c_get_clientdata(client);
|
||||
|
||||
if (info) {
|
||||
if (info->regulator)
|
||||
regulator_unregister(info->regulator);
|
||||
kfree(info);
|
||||
}
|
||||
i2c_set_clientdata(client, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id max8649_id[] = {
|
||||
{ "max8649", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, max8649_id);
|
||||
|
||||
static struct i2c_driver max8649_driver = {
|
||||
.probe = max8649_regulator_probe,
|
||||
.remove = __devexit_p(max8649_regulator_remove),
|
||||
.driver = {
|
||||
.name = "max8649",
|
||||
},
|
||||
.id_table = max8649_id,
|
||||
};
|
||||
|
||||
static int __init max8649_init(void)
|
||||
{
|
||||
return i2c_add_driver(&max8649_driver);
|
||||
}
|
||||
subsys_initcall(max8649_init);
|
||||
|
||||
static void __exit max8649_exit(void)
|
||||
{
|
||||
i2c_del_driver(&max8649_driver);
|
||||
}
|
||||
module_exit(max8649_exit);
|
||||
|
||||
/* Module information */
|
||||
MODULE_DESCRIPTION("MAXIM 8649 voltage regulator driver");
|
||||
MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
/*
|
||||
* Interface of Maxim max8649
|
||||
*
|
||||
* Copyright (C) 2009-2010 Marvell International Ltd.
|
||||
* Haojian Zhuang <haojian.zhuang@marvell.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_REGULATOR_MAX8649_H
|
||||
#define __LINUX_REGULATOR_MAX8649_H
|
||||
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
enum {
|
||||
MAX8649_EXTCLK_26MHZ = 0,
|
||||
MAX8649_EXTCLK_13MHZ,
|
||||
MAX8649_EXTCLK_19MHZ, /* 19.2MHz */
|
||||
};
|
||||
|
||||
enum {
|
||||
MAX8649_RAMP_32MV = 0,
|
||||
MAX8649_RAMP_16MV,
|
||||
MAX8649_RAMP_8MV,
|
||||
MAX8649_RAMP_4MV,
|
||||
MAX8649_RAMP_2MV,
|
||||
MAX8649_RAMP_1MV,
|
||||
MAX8649_RAMP_0_5MV,
|
||||
MAX8649_RAMP_0_25MV,
|
||||
};
|
||||
|
||||
struct max8649_platform_data {
|
||||
struct regulator_init_data *regulator;
|
||||
|
||||
unsigned mode:2; /* bit[1:0] = VID1,VID0 */
|
||||
unsigned extclk_freq:2;
|
||||
unsigned extclk:1;
|
||||
unsigned ramp_timing:3;
|
||||
unsigned ramp_down:1;
|
||||
};
|
||||
|
||||
#endif /* __LINUX_REGULATOR_MAX8649_H */
|
||||
Загрузка…
Ссылка в новой задаче