mmc: omap_hsmmc: Cleanup bitmap definitions of Interrupt Register

Define the most frequently used bitmasks of the Interrupt Enable /
Interrupt Status register with consistent naming ( with _EN suffix).

Use meaningful concatenation of bitfields for INT_EN_MASK, which shows
which interrupts are enabled by default.  No functional changes.

Signed-off-by: Venkatraman S <svenkatr@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
Venkatraman S 2012-11-19 22:00:01 +05:30 коммит произвёл Chris Ball
Родитель b1e056ae4b
Коммит a7e968799b
1 изменённых файлов: 32 добавлений и 24 удалений

Просмотреть файл

@ -80,29 +80,17 @@
#define CLKD_SHIFT 6
#define DTO_MASK 0x000F0000
#define DTO_SHIFT 16
#define INT_EN_MASK 0x307F0033
#define BWR_ENABLE (1 << 4)
#define BRR_ENABLE (1 << 5)
#define DTO_ENABLE (1 << 20)
#define INIT_STREAM (1 << 1)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
#define DMA_EN 0x1
#define DMAE 0x1
#define MSBS (1 << 5)
#define BCE (1 << 1)
#define FOUR_BIT (1 << 1)
#define HSPE (1 << 2)
#define DDR (1 << 19)
#define DW8 (1 << 5)
#define CC 0x1
#define TC 0x02
#define OD 0x1
#define ERR (1 << 15)
#define CMD_TIMEOUT (1 << 16)
#define DATA_TIMEOUT (1 << 20)
#define CMD_CRC (1 << 17)
#define DATA_CRC (1 << 21)
#define CARD_ERR (1 << 28)
#define STAT_CLEAR 0xFFFFFFFF
#define INIT_STREAM_CMD 0x00000000
#define DUAL_VOLT_OCR_BIT 7
@ -111,6 +99,26 @@
#define SOFTRESET (1 << 1)
#define RESETDONE (1 << 0)
/* Interrupt masks for IE and ISE register */
#define CC_EN (1 << 0)
#define TC_EN (1 << 1)
#define BWR_EN (1 << 4)
#define BRR_EN (1 << 5)
#define ERR_EN (1 << 15)
#define CTO_EN (1 << 16)
#define CCRC_EN (1 << 17)
#define CEB_EN (1 << 18)
#define CIE_EN (1 << 19)
#define DTO_EN (1 << 20)
#define DCRC_EN (1 << 21)
#define DEB_EN (1 << 22)
#define CERR_EN (1 << 28)
#define BADA_EN (1 << 29)
#define INT_EN_MASK (BADA_EN | CERR_EN | DEB_EN | DCRC_EN |\
DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \
BRR_EN | BWR_EN | TC_EN | CC_EN)
#define MMC_AUTOSUSPEND_DELAY 100
#define MMC_TIMEOUT_MS 20
#define OMAP_MMC_MIN_CLOCK 400000
@ -458,13 +466,13 @@ static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
unsigned int irq_mask;
if (host->use_dma)
irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE);
irq_mask = INT_EN_MASK & ~(BRR_EN | BWR_EN);
else
irq_mask = INT_EN_MASK;
/* Disable timeout for erases */
if (cmd->opcode == MMC_ERASE)
irq_mask &= ~DTO_ENABLE;
irq_mask &= ~DTO_EN;
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
@ -702,8 +710,8 @@ static void send_init_stream(struct omap_hsmmc_host *host)
OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
while ((reg != CC) && time_before(jiffies, timeout))
reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
while ((reg != CC_EN) && time_before(jiffies, timeout))
reg = OMAP_HSMMC_READ(host->base, STAT) & CC_EN;
OMAP_HSMMC_WRITE(host->base, CON,
OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
@ -794,7 +802,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
}
if (host->use_dma)
cmdreg |= DMA_EN;
cmdreg |= DMAE;
host->req_in_progress = 1;
@ -1018,14 +1026,14 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
data = host->data;
dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
if (status & ERR) {
if (status & ERR_EN) {
omap_hsmmc_dbg_report_irq(host, status);
if (status & (CMD_TIMEOUT | CMD_CRC))
if (status & (CTO_EN | CCRC_EN))
end_cmd = 1;
if (status & (CMD_TIMEOUT | DATA_TIMEOUT))
if (status & (CTO_EN | DTO_EN))
hsmmc_command_incomplete(host, -ETIMEDOUT, end_cmd);
else if (status & (CMD_CRC | DATA_CRC))
else if (status & (CCRC_EN | DCRC_EN))
hsmmc_command_incomplete(host, -EILSEQ, end_cmd);
if (host->data || host->response_busy) {
@ -1034,9 +1042,9 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
}
}
if (end_cmd || ((status & CC) && host->cmd))
if (end_cmd || ((status & CC_EN) && host->cmd))
omap_hsmmc_cmd_done(host, host->cmd);
if ((end_trans || (status & TC)) && host->mrq)
if ((end_trans || (status & TC_EN)) && host->mrq)
omap_hsmmc_xfer_done(host, data);
}