net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager

In smartnic env, if the host (PF) driver is not an e-switch manager, we
are not allowed to apply eswitch ports setups such as vlan (VST),
spoof-checks, min/max rate or state.

Make sure we are eswitch manager when coming to issue these callbacks
and err otherwise.

Also fix the definition of ESW_ALLOWED to rely on eswitch_manager
capability and on the vport_group_manger.

Operations on the VF nic vport context, such as setting a mac or reading
the vport counters are allowed to the PF in this scheme.

The modify nic vport guid code was modified to omit checking the
nic_vport_node_guid_modify eswitch capability.
The reason for doing so is that modifying node guid requires vport group
manager capability, and there's no need to check further capabilities.

1. set_vf_vlan     - disallowed
2. set_vf_spoofchk - disallowed
3. set_vf_mac      - allowed
4. get_vf_config   - allowed
5. set_vf_trust    - disallowed
6. set_vf_rate     - disallowed
7. get_vf_stat     - allowed
8. set_vf_link_state - disallowed

Fixes: f942380c12 ('net/mlx5: E-Switch, Vport ingress/egress ACLs rules for spoofchk')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Tested-by: Or Gerlitz <ogerlitz@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/eswitch.c

@@ -1594,17 +1594,15 @@ static void esw_disable_vport(struct mlx5_eswitch *esw, int vport_num)
 }
 
 /* Public E-Switch API */
-#define ESW_ALLOWED(esw) ((esw) && MLX5_VPORT_MANAGER((esw)->dev))
+#define ESW_ALLOWED(esw) ((esw) && MLX5_ESWITCH_MANAGER((esw)->dev))
+
 
 int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode)
 {
 	int err;
 	int i, enabled_events;
 
-	if (!ESW_ALLOWED(esw))
-		return 0;
-
-	if (!MLX5_ESWITCH_MANAGER(esw->dev) ||
+	if (!ESW_ALLOWED(esw) ||
 	    !MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ft_support)) {
 		esw_warn(esw->dev, "E-Switch FDB is not supported, aborting ...\n");
 		return -EOPNOTSUPP;
@@ -1806,7 +1804,7 @@ int mlx5_eswitch_set_vport_mac(struct mlx5_eswitch *esw,
 	u64 node_guid;
 	int err = 0;
 
-	if (!ESW_ALLOWED(esw))
+	if (!MLX5_CAP_GEN(esw->dev, vport_group_manager))
 		return -EPERM;
 	if (!LEGAL_VPORT(esw, vport) || is_multicast_ether_addr(mac))
 		return -EINVAL;
@@ -1883,7 +1881,7 @@ int mlx5_eswitch_get_vport_config(struct mlx5_eswitch *esw,
 {
 	struct mlx5_vport *evport;
 
-	if (!ESW_ALLOWED(esw))
+	if (!MLX5_CAP_GEN(esw->dev, vport_group_manager))
 		return -EPERM;
 	if (!LEGAL_VPORT(esw, vport))
 		return -EINVAL;

drivers/net/ethernet/mellanox/mlx5/core/vport.c

@@ -549,8 +549,6 @@ int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev,
 		return -EINVAL;
 	if (!MLX5_CAP_GEN(mdev, vport_group_manager))
 		return -EACCES;
-	if (!MLX5_CAP_ESW(mdev, nic_vport_node_guid_modify))
-		return -EOPNOTSUPP;
 
 	in = kvzalloc(inlen, GFP_KERNEL);
 	if (!in)