leds: Add driver for LT3593 controlled LEDs
The LT3593 is a step-up DC/DC converter designed to drive up to ten white LEDs in series. The current flow can be set with a control pin. This driver controls any number of such devices connected on generic GPIOs and exports the function as as platform_driver. The gpio_led platform data struct definition is reused for this purpose. Successfully tested on a PXA embedded board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This commit is contained in:
Daniel Mack
Richard Purdie
Родитель
09a46db05b
Коммит
a8dd18feb6
|
|
@ -245,6 +245,14 @@ config LEDS_INTEL_SS4200
|
|||
drive or power LEDs on the front panel. Using this driver
|
||||
can stop the front LED from blinking after startup.
|
||||
|
||||
config LEDS_LT3593
|
||||
tristate "LED driver for LT3593 controllers"
|
||||
depends on LEDS_CLASS && GENERIC_GPIO
|
||||
help
|
||||
This option enables support for LEDs driven by a Linear Technology
|
||||
LT3593 controller. This controller uses a special one-wire pulse
|
||||
coding protocol to set the brightness.
|
||||
|
||||
comment "LED Triggers"
|
||||
|
||||
config LEDS_TRIGGERS
|
||||
|
|
|
|||
|
|
@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
|
|||
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
|
||||
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
|
||||
obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
|
||||
obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
|
||||
|
||||
# LED SPI Drivers
|
||||
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,217 @@
|
|||
/*
|
||||
* LEDs driver for LT3593 controllers
|
||||
*
|
||||
* See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf
|
||||
*
|
||||
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
|
||||
*
|
||||
* Based on leds-gpio.c,
|
||||
*
|
||||
* Copyright (C) 2007 8D Technologies inc.
|
||||
* Raphael Assenat <raph@8d.com>
|
||||
* Copyright (C) 2008 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/workqueue.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
struct lt3593_led_data {
|
||||
struct led_classdev cdev;
|
||||
unsigned gpio;
|
||||
struct work_struct work;
|
||||
u8 new_level;
|
||||
};
|
||||
|
||||
static void lt3593_led_work(struct work_struct *work)
|
||||
{
|
||||
int pulses;
|
||||
struct lt3593_led_data *led_dat =
|
||||
container_of(work, struct lt3593_led_data, work);
|
||||
|
||||
/*
|
||||
* The LT3593 resets its internal current level register to the maximum
|
||||
* level on the first falling edge on the control pin. Each following
|
||||
* falling edge decreases the current level by 625uA. Up to 32 pulses
|
||||
* can be sent, so the maximum power reduction is 20mA.
|
||||
* After a timeout of 128us, the value is taken from the register and
|
||||
* applied is to the output driver.
|
||||
*/
|
||||
|
||||
if (led_dat->new_level == 0) {
|
||||
gpio_set_value_cansleep(led_dat->gpio, 0);
|
||||
return;
|
||||
}
|
||||
|
||||
pulses = 32 - (led_dat->new_level * 32) / 255;
|
||||
|
||||
if (pulses == 0) {
|
||||
gpio_set_value_cansleep(led_dat->gpio, 0);
|
||||
mdelay(1);
|
||||
gpio_set_value_cansleep(led_dat->gpio, 1);
|
||||
return;
|
||||
}
|
||||
|
||||
gpio_set_value_cansleep(led_dat->gpio, 1);
|
||||
|
||||
while (pulses--) {
|
||||
gpio_set_value_cansleep(led_dat->gpio, 0);
|
||||
udelay(1);
|
||||
gpio_set_value_cansleep(led_dat->gpio, 1);
|
||||
udelay(1);
|
||||
}
|
||||
}
|
||||
|
||||
static void lt3593_led_set(struct led_classdev *led_cdev,
|
||||
enum led_brightness value)
|
||||
{
|
||||
struct lt3593_led_data *led_dat =
|
||||
container_of(led_cdev, struct lt3593_led_data, cdev);
|
||||
|
||||
led_dat->new_level = value;
|
||||
schedule_work(&led_dat->work);
|
||||
}
|
||||
|
||||
static int __devinit create_lt3593_led(const struct gpio_led *template,
|
||||
struct lt3593_led_data *led_dat, struct device *parent)
|
||||
{
|
||||
int ret, state;
|
||||
|
||||
/* skip leds on GPIOs that aren't available */
|
||||
if (!gpio_is_valid(template->gpio)) {
|
||||
printk(KERN_INFO "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n",
|
||||
KBUILD_MODNAME, template->gpio, template->name);
|
||||
return 0;
|
||||
}
|
||||
|
||||
ret = gpio_request(template->gpio, template->name);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
led_dat->cdev.name = template->name;
|
||||
led_dat->cdev.default_trigger = template->default_trigger;
|
||||
led_dat->gpio = template->gpio;
|
||||
|
||||
led_dat->cdev.brightness_set = lt3593_led_set;
|
||||
|
||||
state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
|
||||
led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
|
||||
|
||||
if (!template->retain_state_suspended)
|
||||
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
|
||||
|
||||
ret = gpio_direction_output(led_dat->gpio, state);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
INIT_WORK(&led_dat->work, lt3593_led_work);
|
||||
|
||||
ret = led_classdev_register(parent, &led_dat->cdev);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
printk(KERN_INFO "%s: registered LT3593 LED '%s' at GPIO %d\n",
|
||||
KBUILD_MODNAME, template->name, template->gpio);
|
||||
|
||||
return 0;
|
||||
|
||||
err:
|
||||
gpio_free(led_dat->gpio);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void delete_lt3593_led(struct lt3593_led_data *led)
|
||||
{
|
||||
if (!gpio_is_valid(led->gpio))
|
||||
return;
|
||||
|
||||
led_classdev_unregister(&led->cdev);
|
||||
cancel_work_sync(&led->work);
|
||||
gpio_free(led->gpio);
|
||||
}
|
||||
|
||||
static int __devinit lt3593_led_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
|
||||
struct lt3593_led_data *leds_data;
|
||||
int i, ret = 0;
|
||||
|
||||
if (!pdata)
|
||||
return -EBUSY;
|
||||
|
||||
leds_data = kzalloc(sizeof(struct lt3593_led_data) * pdata->num_leds,
|
||||
GFP_KERNEL);
|
||||
if (!leds_data)
|
||||
return -ENOMEM;
|
||||
|
||||
for (i = 0; i < pdata->num_leds; i++) {
|
||||
ret = create_lt3593_led(&pdata->leds[i], &leds_data[i],
|
||||
&pdev->dev);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, leds_data);
|
||||
|
||||
return 0;
|
||||
|
||||
err:
|
||||
for (i = i - 1; i >= 0; i--)
|
||||
delete_lt3593_led(&leds_data[i]);
|
||||
|
||||
kfree(leds_data);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit lt3593_led_remove(struct platform_device *pdev)
|
||||
{
|
||||
int i;
|
||||
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
|
||||
struct lt3593_led_data *leds_data;
|
||||
|
||||
leds_data = platform_get_drvdata(pdev);
|
||||
|
||||
for (i = 0; i < pdata->num_leds; i++)
|
||||
delete_lt3593_led(&leds_data[i]);
|
||||
|
||||
kfree(leds_data);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver lt3593_led_driver = {
|
||||
.probe = lt3593_led_probe,
|
||||
.remove = __devexit_p(lt3593_led_remove),
|
||||
.driver = {
|
||||
.name = "leds-lt3593",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
MODULE_ALIAS("platform:leds-lt3593");
|
||||
|
||||
static int __init lt3593_led_init(void)
|
||||
{
|
||||
return platform_driver_register(<3593_led_driver);
|
||||
}
|
||||
|
||||
static void __exit lt3593_led_exit(void)
|
||||
{
|
||||
platform_driver_unregister(<3593_led_driver);
|
||||
}
|
||||
|
||||
module_init(lt3593_led_init);
|
||||
module_exit(lt3593_led_exit);
|
||||
|
||||
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
|
||||
MODULE_DESCRIPTION("LED driver for LT3593 controllers");
|
||||
MODULE_LICENSE("GPL");
|
||||
Загрузка…
Ссылка в новой задаче