media: tuners: add new i2c driver for Sharp qm1d1b0004 ISDB-S tuner
The tuner is used in Earthsoft PT1/PT2 DVB boards, and the driver was extraced from (the former) va1j5jf8007s.c of PT1. it might contain PT1 specific configs. Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This commit is contained in:
Akihiro Tsukada
Mauro Carvalho Chehab
Родитель
648db06dd9
Коммит
a959c52df1
|
|
@ -284,4 +284,11 @@ config MEDIA_TUNER_QM1D1C0042
|
|||
default m if !MEDIA_SUBDRV_AUTOSELECT
|
||||
help
|
||||
Sharp QM1D1C0042 trellis coded 8PSK tuner driver.
|
||||
|
||||
config MEDIA_TUNER_QM1D1B0004
|
||||
tristate "Sharp QM1D1B0004 tuner"
|
||||
depends on MEDIA_SUPPORT && I2C
|
||||
default m if !MEDIA_SUBDRV_AUTOSELECT
|
||||
help
|
||||
Sharp QM1D1B0004 ISDB-S tuner driver.
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -41,6 +41,7 @@ obj-$(CONFIG_MEDIA_TUNER_IT913X) += it913x.o
|
|||
obj-$(CONFIG_MEDIA_TUNER_R820T) += r820t.o
|
||||
obj-$(CONFIG_MEDIA_TUNER_MXL301RF) += mxl301rf.o
|
||||
obj-$(CONFIG_MEDIA_TUNER_QM1D1C0042) += qm1d1c0042.o
|
||||
obj-$(CONFIG_MEDIA_TUNER_QM1D1B0004) += qm1d1b0004.o
|
||||
obj-$(CONFIG_MEDIA_TUNER_M88RS6000T) += m88rs6000t.o
|
||||
obj-$(CONFIG_MEDIA_TUNER_TDA18250) += tda18250.o
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,264 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Sharp QM1D1B0004 satellite tuner
|
||||
*
|
||||
* Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com>
|
||||
*
|
||||
* based on (former) drivers/media/pci/pt1/va1j5jf8007s.c.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Note:
|
||||
* Since the data-sheet of this tuner chip is not available,
|
||||
* this driver lacks some tuner_ops and config options.
|
||||
* In addition, the implementation might be dependent on the specific use
|
||||
* in the FE module: VA1J5JF8007S and/or in the product: Earthsoft PT1/PT2.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <media/dvb_frontend.h>
|
||||
#include "qm1d1b0004.h"
|
||||
|
||||
/*
|
||||
* Tuner I/F (copied from the former va1j5jf8007s.c)
|
||||
* b[0] I2C addr
|
||||
* b[1] "0":1, BG:2, divider_quotient[7:3]:5
|
||||
* b[2] divider_quotient[2:0]:3, divider_remainder:5
|
||||
* b[3] "111":3, LPF[3:2]:2, TM:1, "0":1, REF:1
|
||||
* b[4] BANDX, PSC:1, LPF[1:0]:2, DIV:1, "0":1
|
||||
*
|
||||
* PLL frequency step :=
|
||||
* REF == 0 -> PLL XTL frequency(4MHz) / 8
|
||||
* REF == 1 -> PLL XTL frequency(4MHz) / 4
|
||||
*
|
||||
* PreScaler :=
|
||||
* PSC == 0 -> x32
|
||||
* PSC == 1 -> x16
|
||||
*
|
||||
* divider_quotient := (frequency / PLL frequency step) / PreScaler
|
||||
* divider_remainder := (frequency / PLL frequency step) % PreScaler
|
||||
*
|
||||
* LPF := LPF Frequency / 1000 / 2 - 2
|
||||
* LPF Frequency @ baudrate=28.86Mbps = 30000
|
||||
*
|
||||
* band (1..9)
|
||||
* band 1 (freq < 986000) -> DIV:1, BANDX:5, PSC:1
|
||||
* band 2 (freq < 1072000) -> DIV:1, BANDX:6, PSC:1
|
||||
* band 3 (freq < 1154000) -> DIV:1, BANDX:7, PSC:0
|
||||
* band 4 (freq < 1291000) -> DIV:0, BANDX:1, PSC:0
|
||||
* band 5 (freq < 1447000) -> DIV:0, BANDX:2, PSC:0
|
||||
* band 6 (freq < 1615000) -> DIV:0, BANDX:3, PSC:0
|
||||
* band 7 (freq < 1791000) -> DIV:0, BANDX:4, PSC:0
|
||||
* band 8 (freq < 1972000) -> DIV:0, BANDX:5, PSC:0
|
||||
* band 9 (freq < 2150000) -> DIV:0, BANDX:6, PSC:0
|
||||
*/
|
||||
|
||||
#define QM1D1B0004_PSC_MASK (1 << 4)
|
||||
|
||||
#define QM1D1B0004_XTL_FREQ 4000
|
||||
#define QM1D1B0004_LPF_FALLBACK 30000
|
||||
|
||||
static const struct qm1d1b0004_config default_cfg = {
|
||||
.lpf_freq = QM1D1B0004_CFG_LPF_DFLT,
|
||||
.half_step = false,
|
||||
};
|
||||
|
||||
struct qm1d1b0004_state {
|
||||
struct qm1d1b0004_config cfg;
|
||||
struct i2c_client *i2c;
|
||||
};
|
||||
|
||||
|
||||
struct qm1d1b0004_cb_map {
|
||||
u32 frequency;
|
||||
u8 cb;
|
||||
};
|
||||
|
||||
static const struct qm1d1b0004_cb_map cb_maps[] = {
|
||||
{ 986000, 0xb2 },
|
||||
{ 1072000, 0xd2 },
|
||||
{ 1154000, 0xe2 },
|
||||
{ 1291000, 0x20 },
|
||||
{ 1447000, 0x40 },
|
||||
{ 1615000, 0x60 },
|
||||
{ 1791000, 0x80 },
|
||||
{ 1972000, 0xa0 },
|
||||
};
|
||||
|
||||
static u8 lookup_cb(u32 frequency)
|
||||
{
|
||||
int i;
|
||||
const struct qm1d1b0004_cb_map *map;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(cb_maps); i++) {
|
||||
map = &cb_maps[i];
|
||||
if (frequency < map->frequency)
|
||||
return map->cb;
|
||||
}
|
||||
return 0xc0;
|
||||
}
|
||||
|
||||
static int qm1d1b0004_set_params(struct dvb_frontend *fe)
|
||||
{
|
||||
struct qm1d1b0004_state *state;
|
||||
u32 frequency, pll, lpf_freq;
|
||||
u16 word;
|
||||
u8 buf[4], cb, lpf;
|
||||
int ret;
|
||||
|
||||
state = fe->tuner_priv;
|
||||
frequency = fe->dtv_property_cache.frequency;
|
||||
|
||||
pll = QM1D1B0004_XTL_FREQ / 4;
|
||||
if (state->cfg.half_step)
|
||||
pll /= 2;
|
||||
word = DIV_ROUND_CLOSEST(frequency, pll);
|
||||
cb = lookup_cb(frequency);
|
||||
if (cb & QM1D1B0004_PSC_MASK)
|
||||
word = (word << 1 & ~0x1f) | (word & 0x0f);
|
||||
|
||||
/* step.1: set frequency with BG:2, TM:0(4MHZ), LPF:4MHz */
|
||||
buf[0] = 0x40 | word >> 8;
|
||||
buf[1] = word;
|
||||
/* inconsisnten with the above I/F doc. maybe the doc is wrong */
|
||||
buf[2] = 0xe0 | state->cfg.half_step;
|
||||
buf[3] = cb;
|
||||
ret = i2c_master_send(state->i2c, buf, 4);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* step.2: set TM:1 */
|
||||
buf[0] = 0xe4 | state->cfg.half_step;
|
||||
ret = i2c_master_send(state->i2c, buf, 1);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
msleep(20);
|
||||
|
||||
/* step.3: set LPF */
|
||||
lpf_freq = state->cfg.lpf_freq;
|
||||
if (lpf_freq == QM1D1B0004_CFG_LPF_DFLT)
|
||||
lpf_freq = fe->dtv_property_cache.symbol_rate / 1000;
|
||||
if (lpf_freq == 0)
|
||||
lpf_freq = QM1D1B0004_LPF_FALLBACK;
|
||||
lpf = DIV_ROUND_UP(lpf_freq, 2000) - 2;
|
||||
buf[0] = 0xe4 | ((lpf & 0x0c) << 1) | state->cfg.half_step;
|
||||
buf[1] = cb | ((lpf & 0x03) << 2);
|
||||
ret = i2c_master_send(state->i2c, buf, 2);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* step.4: read PLL lock? */
|
||||
buf[0] = 0;
|
||||
ret = i2c_master_recv(state->i2c, buf, 1);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int qm1d1b0004_set_config(struct dvb_frontend *fe, void *priv_cfg)
|
||||
{
|
||||
struct qm1d1b0004_state *state;
|
||||
|
||||
state = fe->tuner_priv;
|
||||
memcpy(&state->cfg, priv_cfg, sizeof(state->cfg));
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int qm1d1b0004_init(struct dvb_frontend *fe)
|
||||
{
|
||||
struct qm1d1b0004_state *state;
|
||||
u8 buf[2] = {0xf8, 0x04};
|
||||
|
||||
state = fe->tuner_priv;
|
||||
if (state->cfg.half_step)
|
||||
buf[0] |= 0x01;
|
||||
|
||||
return i2c_master_send(state->i2c, buf, 2);
|
||||
}
|
||||
|
||||
|
||||
static const struct dvb_tuner_ops qm1d1b0004_ops = {
|
||||
.info = {
|
||||
.name = "Sharp qm1d1b0004",
|
||||
|
||||
.frequency_min = 950000,
|
||||
.frequency_max = 2150000,
|
||||
},
|
||||
|
||||
.init = qm1d1b0004_init,
|
||||
|
||||
.set_params = qm1d1b0004_set_params,
|
||||
.set_config = qm1d1b0004_set_config,
|
||||
};
|
||||
|
||||
static int
|
||||
qm1d1b0004_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
||||
{
|
||||
struct dvb_frontend *fe;
|
||||
struct qm1d1b0004_config *cfg;
|
||||
struct qm1d1b0004_state *state;
|
||||
int ret;
|
||||
|
||||
cfg = client->dev.platform_data;
|
||||
fe = cfg->fe;
|
||||
i2c_set_clientdata(client, fe);
|
||||
|
||||
fe->tuner_priv = kzalloc(sizeof(struct qm1d1b0004_state), GFP_KERNEL);
|
||||
if (!fe->tuner_priv) {
|
||||
ret = -ENOMEM;
|
||||
goto err_mem;
|
||||
}
|
||||
|
||||
memcpy(&fe->ops.tuner_ops, &qm1d1b0004_ops, sizeof(fe->ops.tuner_ops));
|
||||
|
||||
state = fe->tuner_priv;
|
||||
state->i2c = client;
|
||||
ret = qm1d1b0004_set_config(fe, cfg);
|
||||
if (ret != 0)
|
||||
goto err_priv;
|
||||
|
||||
dev_info(&client->dev, "Sharp QM1D1B0004 attached.\n");
|
||||
return 0;
|
||||
|
||||
err_priv:
|
||||
kfree(fe->tuner_priv);
|
||||
err_mem:
|
||||
fe->tuner_priv = NULL;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int qm1d1b0004_remove(struct i2c_client *client)
|
||||
{
|
||||
struct dvb_frontend *fe;
|
||||
|
||||
fe = i2c_get_clientdata(client);
|
||||
kfree(fe->tuner_priv);
|
||||
fe->tuner_priv = NULL;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static const struct i2c_device_id qm1d1b0004_id[] = {
|
||||
{"qm1d1b0004", 0},
|
||||
{}
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, qm1d1b0004_id);
|
||||
|
||||
static struct i2c_driver qm1d1b0004_driver = {
|
||||
.driver = {
|
||||
.name = "qm1d1b0004",
|
||||
},
|
||||
.probe = qm1d1b0004_probe,
|
||||
.remove = qm1d1b0004_remove,
|
||||
.id_table = qm1d1b0004_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(qm1d1b0004_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Sharp QM1D1B0004");
|
||||
MODULE_AUTHOR("Akihiro Tsukada");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Sharp QM1D1B0004 satellite tuner
|
||||
*
|
||||
* Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com>
|
||||
*/
|
||||
|
||||
#ifndef QM1D1B0004_H
|
||||
#define QM1D1B0004_H
|
||||
|
||||
#include <media/dvb_frontend.h>
|
||||
|
||||
struct qm1d1b0004_config {
|
||||
struct dvb_frontend *fe;
|
||||
|
||||
u32 lpf_freq; /* LPF frequency[kHz]. Default: symbol rate */
|
||||
bool half_step; /* use PLL frequency step of 500Hz istead of 1000Hz */
|
||||
};
|
||||
|
||||
/* special values indicating to use the default in qm1d1b0004_config */
|
||||
#define QM1D1B0004_CFG_PLL_DFLT 0
|
||||
#define QM1D1B0004_CFG_LPF_DFLT 0
|
||||
|
||||
#endif
|
||||
Загрузка…
Ссылка в новой задаче