phylink,sfp: negotiate interface format with MAC
Negotiate the interface format with the MAC rather than requiring it to be a fixed type specified solely by the SFP module. This allows modules that can work with several different interface signalling formats to select a format compatible with the MAC - for example, a Fiber module supporing Gigabit ethernet and faster connected to a Gigabit only MAC needs to select the 1000BASE-X mode. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Родитель
03145864bd
Коммит
a9c79364df
|
@ -1584,25 +1584,14 @@ static int phylink_sfp_module_insert(void *upstream,
|
|||
bool changed;
|
||||
u8 port;
|
||||
|
||||
sfp_parse_support(pl->sfp_bus, id, support);
|
||||
port = sfp_parse_port(pl->sfp_bus, id, support);
|
||||
iface = sfp_parse_interface(pl->sfp_bus, id);
|
||||
|
||||
ASSERT_RTNL();
|
||||
|
||||
switch (iface) {
|
||||
case PHY_INTERFACE_MODE_SGMII:
|
||||
case PHY_INTERFACE_MODE_1000BASEX:
|
||||
case PHY_INTERFACE_MODE_2500BASEX:
|
||||
case PHY_INTERFACE_MODE_10GKR:
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
sfp_parse_support(pl->sfp_bus, id, support);
|
||||
port = sfp_parse_port(pl->sfp_bus, id, support);
|
||||
|
||||
memset(&config, 0, sizeof(config));
|
||||
linkmode_copy(config.advertising, support);
|
||||
config.interface = iface;
|
||||
config.interface = PHY_INTERFACE_MODE_NA;
|
||||
config.speed = SPEED_UNKNOWN;
|
||||
config.duplex = DUPLEX_UNKNOWN;
|
||||
config.pause = MLO_PAUSE_AN;
|
||||
|
@ -1610,6 +1599,22 @@ static int phylink_sfp_module_insert(void *upstream,
|
|||
|
||||
/* Ignore errors if we're expecting a PHY to attach later */
|
||||
ret = phylink_validate(pl, support, &config);
|
||||
if (ret) {
|
||||
netdev_err(pl->netdev, "validation with support %*pb failed: %d\n",
|
||||
__ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
|
||||
if (iface == PHY_INTERFACE_MODE_NA) {
|
||||
netdev_err(pl->netdev,
|
||||
"selection of interface failed, advertisment %*pb\n",
|
||||
__ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
config.interface = iface;
|
||||
ret = phylink_validate(pl, support, &config);
|
||||
if (ret) {
|
||||
netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
|
||||
phylink_an_mode_str(MLO_AN_INBAND),
|
||||
|
|
|
@ -105,68 +105,6 @@ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
|
|||
}
|
||||
EXPORT_SYMBOL_GPL(sfp_parse_port);
|
||||
|
||||
/**
|
||||
* sfp_parse_interface() - Parse the phy_interface_t
|
||||
* @bus: a pointer to the &struct sfp_bus structure for the sfp module
|
||||
* @id: a pointer to the module's &struct sfp_eeprom_id
|
||||
*
|
||||
* Derive the phy_interface_t mode for the information found in the
|
||||
* module's identifying EEPROM. There is no standard or defined way
|
||||
* to derive this information, so we use some heuristics.
|
||||
*
|
||||
* If the encoding is 64b66b, then the module must be >= 10G, so
|
||||
* return %PHY_INTERFACE_MODE_10GKR.
|
||||
*
|
||||
* If it's 8b10b, then it's 1G or slower. If it's definitely a fibre
|
||||
* module, return %PHY_INTERFACE_MODE_1000BASEX mode, otherwise return
|
||||
* %PHY_INTERFACE_MODE_SGMII mode.
|
||||
*
|
||||
* If the encoding is not known, return %PHY_INTERFACE_MODE_NA.
|
||||
*/
|
||||
phy_interface_t sfp_parse_interface(struct sfp_bus *bus,
|
||||
const struct sfp_eeprom_id *id)
|
||||
{
|
||||
phy_interface_t iface;
|
||||
|
||||
/* Setting the serdes link mode is guesswork: there's no field in
|
||||
* the EEPROM which indicates what mode should be used.
|
||||
*
|
||||
* If the module wants 64b66b, then it must be >= 10G.
|
||||
*
|
||||
* If it's a gigabit-only fiber module, it probably does not have
|
||||
* a PHY, so switch to 802.3z negotiation mode. Otherwise, switch
|
||||
* to SGMII mode (which is required to support non-gigabit speeds).
|
||||
*/
|
||||
switch (id->base.encoding) {
|
||||
case SFP_ENCODING_8472_64B66B:
|
||||
iface = PHY_INTERFACE_MODE_10GKR;
|
||||
break;
|
||||
|
||||
case SFP_ENCODING_8B10B:
|
||||
if (!id->base.e1000_base_t &&
|
||||
!id->base.e100_base_lx &&
|
||||
!id->base.e100_base_fx)
|
||||
iface = PHY_INTERFACE_MODE_1000BASEX;
|
||||
else
|
||||
iface = PHY_INTERFACE_MODE_SGMII;
|
||||
break;
|
||||
|
||||
default:
|
||||
if (id->base.e1000_base_cx) {
|
||||
iface = PHY_INTERFACE_MODE_1000BASEX;
|
||||
break;
|
||||
}
|
||||
|
||||
iface = PHY_INTERFACE_MODE_NA;
|
||||
dev_err(bus->sfp_dev,
|
||||
"SFP module encoding does not support 8b10b nor 64b66b\n");
|
||||
break;
|
||||
}
|
||||
|
||||
return iface;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(sfp_parse_interface);
|
||||
|
||||
/**
|
||||
* sfp_parse_support() - Parse the eeprom id for supported link modes
|
||||
* @bus: a pointer to the &struct sfp_bus structure for the sfp module
|
||||
|
@ -296,6 +234,45 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
|
|||
}
|
||||
EXPORT_SYMBOL_GPL(sfp_parse_support);
|
||||
|
||||
/**
|
||||
* sfp_select_interface() - Select appropriate phy_interface_t mode
|
||||
* @bus: a pointer to the &struct sfp_bus structure for the sfp module
|
||||
* @id: a pointer to the module's &struct sfp_eeprom_id
|
||||
* @link_modes: ethtool link modes mask
|
||||
*
|
||||
* Derive the phy_interface_t mode for the information found in the
|
||||
* module's identifying EEPROM and the link modes mask. There is no
|
||||
* standard or defined way to derive this information, so we decide
|
||||
* based upon the link mode mask.
|
||||
*/
|
||||
phy_interface_t sfp_select_interface(struct sfp_bus *bus,
|
||||
const struct sfp_eeprom_id *id,
|
||||
unsigned long *link_modes)
|
||||
{
|
||||
if (phylink_test(link_modes, 10000baseCR_Full) ||
|
||||
phylink_test(link_modes, 10000baseSR_Full) ||
|
||||
phylink_test(link_modes, 10000baseLR_Full) ||
|
||||
phylink_test(link_modes, 10000baseLRM_Full) ||
|
||||
phylink_test(link_modes, 10000baseER_Full))
|
||||
return PHY_INTERFACE_MODE_10GKR;
|
||||
|
||||
if (phylink_test(link_modes, 2500baseX_Full))
|
||||
return PHY_INTERFACE_MODE_2500BASEX;
|
||||
|
||||
if (id->base.e1000_base_t ||
|
||||
id->base.e100_base_lx ||
|
||||
id->base.e100_base_fx)
|
||||
return PHY_INTERFACE_MODE_SGMII;
|
||||
|
||||
if (phylink_test(link_modes, 1000baseX_Full))
|
||||
return PHY_INTERFACE_MODE_1000BASEX;
|
||||
|
||||
dev_warn(bus->sfp_dev, "Unable to ascertain link mode\n");
|
||||
|
||||
return PHY_INTERFACE_MODE_NA;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(sfp_select_interface);
|
||||
|
||||
static LIST_HEAD(sfp_buses);
|
||||
static DEFINE_MUTEX(sfp_mutex);
|
||||
|
||||
|
|
|
@ -422,10 +422,11 @@ struct sfp_upstream_ops {
|
|||
#if IS_ENABLED(CONFIG_SFP)
|
||||
int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
|
||||
unsigned long *support);
|
||||
phy_interface_t sfp_parse_interface(struct sfp_bus *bus,
|
||||
const struct sfp_eeprom_id *id);
|
||||
void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
|
||||
unsigned long *support);
|
||||
phy_interface_t sfp_select_interface(struct sfp_bus *bus,
|
||||
const struct sfp_eeprom_id *id,
|
||||
unsigned long *link_modes);
|
||||
|
||||
int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo);
|
||||
int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee,
|
||||
|
@ -444,18 +445,19 @@ static inline int sfp_parse_port(struct sfp_bus *bus,
|
|||
return PORT_OTHER;
|
||||
}
|
||||
|
||||
static inline phy_interface_t sfp_parse_interface(struct sfp_bus *bus,
|
||||
const struct sfp_eeprom_id *id)
|
||||
{
|
||||
return PHY_INTERFACE_MODE_NA;
|
||||
}
|
||||
|
||||
static inline void sfp_parse_support(struct sfp_bus *bus,
|
||||
const struct sfp_eeprom_id *id,
|
||||
unsigned long *support)
|
||||
{
|
||||
}
|
||||
|
||||
static inline phy_interface_t sfp_select_interface(struct sfp_bus *bus,
|
||||
const struct sfp_eeprom_id *id,
|
||||
unsigned long *link_modes)
|
||||
{
|
||||
return PHY_INTERFACE_MODE_NA;
|
||||
}
|
||||
|
||||
static inline int sfp_get_module_info(struct sfp_bus *bus,
|
||||
struct ethtool_modinfo *modinfo)
|
||||
{
|
||||
|
|
Загрузка…
Ссылка в новой задаче