drm/bridge: Add PTN3460 bridge driver

This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS
bridge chip.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Documentation/devicetree/bindings/drm/bridge/ptn3460.txt

@@ -0,0 +1,27 @@
+ptn3460 bridge bindings
+
+Required properties:
+	- compatible: "nxp,ptn3460"
+	- reg: i2c address of the bridge
+	- powerdown-gpio: OF device-tree gpio specification
+	- reset-gpio: OF device-tree gpio specification
+	- edid-emulation: The EDID emulation entry to use
+		+-------+------------+------------------+
+		| Value | Resolution | Description      |
+		|   0   |  1024x768  | NXP Generic      |
+		|   1   |  1920x1080 | NXP Generic      |
+		|   2   |  1920x1080 | NXP Generic      |
+		|   3   |  1600x900  | Samsung LTM200KT |
+		|   4   |  1920x1080 | Samsung LTM230HT |
+		|   5   |  1366x768  | NXP Generic      |
+		|   6   |  1600x900  | ChiMei M215HGE   |
+		+-------+------------+------------------+
+
+Example:
+	lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpio = <&gpy2 5 1 0 0>;
+		reset-gpio = <&gpx1 5 1 0 0>;
+		edid-emulation = <5>;
+	};

drivers/gpu/drm/Kconfig

@@ -199,3 +199,5 @@ source "drivers/gpu/drm/msm/Kconfig"
 source "drivers/gpu/drm/tegra/Kconfig"
 
 source "drivers/gpu/drm/panel/Kconfig"
+
+source "drivers/gpu/drm/bridge/Kconfig"

drivers/gpu/drm/Makefile

@@ -63,3 +63,4 @@ obj-$(CONFIG_DRM_MSM) += msm/
 obj-$(CONFIG_DRM_TEGRA) += tegra/
 obj-y			+= i2c/
 obj-y			+= panel/
+obj-y			+= bridge/

drivers/gpu/drm/bridge/Kconfig

@@ -0,0 +1,4 @@
+config DRM_PTN3460
+	tristate "PTN3460 DP/LVDS bridge"
+	depends on DRM && I2C
+	---help---

drivers/gpu/drm/bridge/Makefile

@@ -0,0 +1,3 @@
+ccflags-y := -Iinclude/drm
+
+obj-$(CONFIG_DRM_PTN3460) += ptn3460.o

drivers/gpu/drm/bridge/ptn3460.c

@@ -0,0 +1,349 @@
+/*
+ * NXP PTN3460 DP/LVDS bridge driver
+ *
+ * Copyright (C) 2013 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include "drmP.h"
+#include "drm_edid.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+#include "bridge/ptn3460.h"
+
+#define PTN3460_EDID_ADDR			0x0
+#define PTN3460_EDID_EMULATION_ADDR		0x84
+#define PTN3460_EDID_ENABLE_EMULATION		0
+#define PTN3460_EDID_EMULATION_SELECTION	1
+#define PTN3460_EDID_SRAM_LOAD_ADDR		0x85
+
+struct ptn3460_bridge {
+	struct drm_connector connector;
+	struct i2c_client *client;
+	struct drm_encoder *encoder;
+	struct drm_bridge *bridge;
+	struct edid *edid;
+	int gpio_pd_n;
+	int gpio_rst_n;
+	u32 edid_emulation;
+	bool enabled;
+};
+
+static int ptn3460_read_bytes(struct ptn3460_bridge *ptn_bridge, char addr,
+		u8 *buf, int len)
+{
+	int ret;
+
+	ret = i2c_master_send(ptn_bridge->client, &addr, 1);
+	if (ret <= 0) {
+		DRM_ERROR("Failed to send i2c command, ret=%d\n", ret);
+		return ret;
+	}
+
+	ret = i2c_master_recv(ptn_bridge->client, buf, len);
+	if (ret <= 0) {
+		DRM_ERROR("Failed to recv i2c data, ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ptn3460_write_byte(struct ptn3460_bridge *ptn_bridge, char addr,
+		char val)
+{
+	int ret;
+	char buf[2];
+
+	buf[0] = addr;
+	buf[1] = val;
+
+	ret = i2c_master_send(ptn_bridge->client, buf, ARRAY_SIZE(buf));
+	if (ret <= 0) {
+		DRM_ERROR("Failed to send i2c command, ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ptn3460_select_edid(struct ptn3460_bridge *ptn_bridge)
+{
+	int ret;
+	char val;
+
+	/* Load the selected edid into SRAM (accessed at PTN3460_EDID_ADDR) */
+	ret = ptn3460_write_byte(ptn_bridge, PTN3460_EDID_SRAM_LOAD_ADDR,
+			ptn_bridge->edid_emulation);
+	if (ret) {
+		DRM_ERROR("Failed to transfer edid to sram, ret=%d\n", ret);
+		return ret;
+	}
+
+	/* Enable EDID emulation and select the desired EDID */
+	val = 1 << PTN3460_EDID_ENABLE_EMULATION |
+		ptn_bridge->edid_emulation << PTN3460_EDID_EMULATION_SELECTION;
+
+	ret = ptn3460_write_byte(ptn_bridge, PTN3460_EDID_EMULATION_ADDR, val);
+	if (ret) {
+		DRM_ERROR("Failed to write edid value, ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ptn3460_pre_enable(struct drm_bridge *bridge)
+{
+	struct ptn3460_bridge *ptn_bridge = bridge->driver_private;
+	int ret;
+
+	if (ptn_bridge->enabled)
+		return;
+
+	if (gpio_is_valid(ptn_bridge->gpio_pd_n))
+		gpio_set_value(ptn_bridge->gpio_pd_n, 1);
+
+	if (gpio_is_valid(ptn_bridge->gpio_rst_n)) {
+		gpio_set_value(ptn_bridge->gpio_rst_n, 0);
+		udelay(10);
+		gpio_set_value(ptn_bridge->gpio_rst_n, 1);
+	}
+
+	/*
+	 * There's a bug in the PTN chip where it falsely asserts hotplug before
+	 * it is fully functional. We're forced to wait for the maximum start up
+	 * time specified in the chip's datasheet to make sure we're really up.
+	 */
+	msleep(90);
+
+	ret = ptn3460_select_edid(ptn_bridge);
+	if (ret)
+		DRM_ERROR("Select edid failed ret=%d\n", ret);
+
+	ptn_bridge->enabled = true;
+}
+
+static void ptn3460_enable(struct drm_bridge *bridge)
+{
+}
+
+static void ptn3460_disable(struct drm_bridge *bridge)
+{
+	struct ptn3460_bridge *ptn_bridge = bridge->driver_private;
+
+	if (!ptn_bridge->enabled)
+		return;
+
+	ptn_bridge->enabled = false;
+
+	if (gpio_is_valid(ptn_bridge->gpio_rst_n))
+		gpio_set_value(ptn_bridge->gpio_rst_n, 1);
+
+	if (gpio_is_valid(ptn_bridge->gpio_pd_n))
+		gpio_set_value(ptn_bridge->gpio_pd_n, 0);
+}
+
+static void ptn3460_post_disable(struct drm_bridge *bridge)
+{
+}
+
+void ptn3460_bridge_destroy(struct drm_bridge *bridge)
+{
+	struct ptn3460_bridge *ptn_bridge = bridge->driver_private;
+
+	drm_bridge_cleanup(bridge);
+	if (gpio_is_valid(ptn_bridge->gpio_pd_n))
+		gpio_free(ptn_bridge->gpio_pd_n);
+	if (gpio_is_valid(ptn_bridge->gpio_rst_n))
+		gpio_free(ptn_bridge->gpio_rst_n);
+	/* Nothing else to free, we've got devm allocated memory */
+}
+
+struct drm_bridge_funcs ptn3460_bridge_funcs = {
+	.pre_enable = ptn3460_pre_enable,
+	.enable = ptn3460_enable,
+	.disable = ptn3460_disable,
+	.post_disable = ptn3460_post_disable,
+	.destroy = ptn3460_bridge_destroy,
+};
+
+int ptn3460_get_modes(struct drm_connector *connector)
+{
+	struct ptn3460_bridge *ptn_bridge;
+	u8 *edid;
+	int ret, num_modes;
+	bool power_off;
+
+	ptn_bridge = container_of(connector, struct ptn3460_bridge, connector);
+
+	if (ptn_bridge->edid)
+		return drm_add_edid_modes(connector, ptn_bridge->edid);
+
+	power_off = !ptn_bridge->enabled;
+	ptn3460_pre_enable(ptn_bridge->bridge);
+
+	edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+	if (!edid) {
+		DRM_ERROR("Failed to allocate edid\n");
+		return 0;
+	}
+
+	ret = ptn3460_read_bytes(ptn_bridge, PTN3460_EDID_ADDR, edid,
+			EDID_LENGTH);
+	if (ret) {
+		kfree(edid);
+		num_modes = 0;
+		goto out;
+	}
+
+	ptn_bridge->edid = (struct edid *)edid;
+	drm_mode_connector_update_edid_property(connector, ptn_bridge->edid);
+
+	num_modes = drm_add_edid_modes(connector, ptn_bridge->edid);
+
+out:
+	if (power_off)
+		ptn3460_disable(ptn_bridge->bridge);
+
+	return num_modes;
+}
+
+static int ptn3460_mode_valid(struct drm_connector *connector,
+		struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector)
+{
+	struct ptn3460_bridge *ptn_bridge;
+
+	ptn_bridge = container_of(connector, struct ptn3460_bridge, connector);
+
+	return ptn_bridge->encoder;
+}
+
+struct drm_connector_helper_funcs ptn3460_connector_helper_funcs = {
+	.get_modes = ptn3460_get_modes,
+	.mode_valid = ptn3460_mode_valid,
+	.best_encoder = ptn3460_best_encoder,
+};
+
+enum drm_connector_status ptn3460_detect(struct drm_connector *connector,
+		bool force)
+{
+	return connector_status_connected;
+}
+
+void ptn3460_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_cleanup(connector);
+}
+
+struct drm_connector_funcs ptn3460_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = ptn3460_detect,
+	.destroy = ptn3460_connector_destroy,
+};
+
+int ptn3460_init(struct drm_device *dev, struct drm_encoder *encoder,
+		struct i2c_client *client, struct device_node *node)
+{
+	int ret;
+	struct drm_bridge *bridge;
+	struct ptn3460_bridge *ptn_bridge;
+
+	bridge = devm_kzalloc(dev->dev, sizeof(*bridge), GFP_KERNEL);
+	if (!bridge) {
+		DRM_ERROR("Failed to allocate drm bridge\n");
+		return -ENOMEM;
+	}
+
+	ptn_bridge = devm_kzalloc(dev->dev, sizeof(*ptn_bridge), GFP_KERNEL);
+	if (!ptn_bridge) {
+		DRM_ERROR("Failed to allocate ptn bridge\n");
+		return -ENOMEM;
+	}
+
+	ptn_bridge->client = client;
+	ptn_bridge->encoder = encoder;
+	ptn_bridge->bridge = bridge;
+	ptn_bridge->gpio_pd_n = of_get_named_gpio(node, "powerdown-gpio", 0);
+	if (gpio_is_valid(ptn_bridge->gpio_pd_n)) {
+		ret = gpio_request_one(ptn_bridge->gpio_pd_n,
+				GPIOF_OUT_INIT_HIGH, "PTN3460_PD_N");
+		if (ret) {
+			DRM_ERROR("Request powerdown-gpio failed (%d)\n", ret);
+			return ret;
+		}
+	}
+
+	ptn_bridge->gpio_rst_n = of_get_named_gpio(node, "reset-gpio", 0);
+	if (gpio_is_valid(ptn_bridge->gpio_rst_n)) {
+		/*
+		 * Request the reset pin low to avoid the bridge being
+		 * initialized prematurely
+		 */
+		ret = gpio_request_one(ptn_bridge->gpio_rst_n,
+				GPIOF_OUT_INIT_LOW, "PTN3460_RST_N");
+		if (ret) {
+			DRM_ERROR("Request reset-gpio failed (%d)\n", ret);
+			gpio_free(ptn_bridge->gpio_pd_n);
+			return ret;
+		}
+	}
+
+	ret = of_property_read_u32(node, "edid-emulation",
+			&ptn_bridge->edid_emulation);
+	if (ret) {
+		DRM_ERROR("Can't read edid emulation value\n");
+		goto err;
+	}
+
+	ret = drm_bridge_init(dev, bridge, &ptn3460_bridge_funcs);
+	if (ret) {
+		DRM_ERROR("Failed to initialize bridge with drm\n");
+		goto err;
+	}
+
+	bridge->driver_private = ptn_bridge;
+	encoder->bridge = bridge;
+
+	ret = drm_connector_init(dev, &ptn_bridge->connector,
+			&ptn3460_connector_funcs, DRM_MODE_CONNECTOR_LVDS);
+	if (ret) {
+		DRM_ERROR("Failed to initialize connector with drm\n");
+		goto err;
+	}
+	drm_connector_helper_add(&ptn_bridge->connector,
+			&ptn3460_connector_helper_funcs);
+	drm_sysfs_connector_add(&ptn_bridge->connector);
+	drm_mode_connector_attach_encoder(&ptn_bridge->connector, encoder);
+
+	return 0;
+
+err:
+	if (gpio_is_valid(ptn_bridge->gpio_pd_n))
+		gpio_free(ptn_bridge->gpio_pd_n);
+	if (gpio_is_valid(ptn_bridge->gpio_rst_n))
+		gpio_free(ptn_bridge->gpio_rst_n);
+	return ret;
+}

include/drm/bridge/ptn3460.h

@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2013 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DRM_BRIDGE_PTN3460_H_
+#define _DRM_BRIDGE_PTN3460_H_
+
+struct drm_device;
+struct drm_encoder;
+struct i2c_client;
+struct device_node;
+
+#ifdef CONFIG_DRM_PTN3460
+
+int ptn3460_init(struct drm_device *dev, struct drm_encoder *encoder,
+		struct i2c_client *client, struct device_node *node);
+#else
+
+static inline int ptn3460_init(struct drm_device *dev,
+		struct drm_encoder *encoder, struct i2c_client *client,
+		struct device_node *node)
+{
+	return 0;
+}
+
+#endif
+
+#endif